497338
3
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
ENGLISH
5
STATION SELECTION
Press up or down button (20) shortly to activate automatic seek function. Press for 2
seconds until “ MANUAL” appeared on the display, the manual tuning
Mode is selected. If the buttons are not touched for more then 3 seconds it
automatic goes back to “AUTO SEEK”
AUTOSTORE AS
-Automatic Memory Storing
Press func button (10) “AS/PS” longer then three seconds , activate AS.The radio searches
for the 6 strongest stations and stores them into the preset of the currently selected band.
NOTE: Any stations that were previously stored in this memory bank are replaced by
a new station.
PRESET SCAN PS
Press func button (10) “AS/PS” for less then three seconds.The unit will pause for ten
seconds at each preset station. Press button (10) “AS/PS” again to stop scanning when
the desired station is reached.
Station store and recall
Press any one of the preset buttons (12 to 17) to recall a station which had been
stored in the memory. Press a preset button for 2 seconds, previous preset station is
overwritten by current tuned frequency.
RDS (RADIO DATA SYSTEM) OPERATIONS
The RDS data are the PI, PS,TP, PTY,TA and AF data.
PI: Program indentification code
Code for identifying program
PS: Program service name
Broadcast station name data expressed
In alphanumerically character
TP:Traffic program identification
Identification data for traffic information broadcasting station
TA:Traffic announcement identification
Identification data showing traffic information is being transmitted or not
AF:Alternative frequencies
Frequency list of broadcasting station transmitting the same program
SETTING AF MODE
Press button (3) AF for less then three seconds to select AF to be ON or OFF
Whenever AF is switched on, symbol “AF” appears on the display.
The tuner will return to Alternative Frequencies whenever the reception signals
getting worse.“ALARM” will be displayed when an emergency broadcasting is
received;meanwhile sound output level will be adjusted to the preset output level
automatically when the volume control is set at minimum.
USING PTY TO SELECT PROGRAM
The PTY function allows you to search for stations with a particular program type.
To select your program type, press the button (5) “PTY” less then three seconds.
Display will show:“pop music” or “news. Now you can select the music type or
speech type using preset keys 1 to 6 for your selection as listed table:
Preset number PTY “pop” group PTY in “news” group
1 pop m, rock m news,affairs,info
2 easy m, light m sport,educatie,drama
3 classics, other m culture, science, varied
4 jazz, country weather, finance, childeren
5 nation m, oldies social, religion, phone in
6folk m travel, leisure, document
While selecting PTY engagement, its selection is implemented by preset button as
described in notes.When PTY is selected, the radio starts to search corresponding
PTY information is detected. If corresponding PTY information is not found, normal
radio reception is resumed.After the text “NON PTY” is at the display for 5 seconds.
LISTENING TO TRAFFIC ANNOUNCEMENT (TA)
Traffic announcement can interrupt CD play or radio listening when broadcast.
Briefly press the button (4) “TA” to select the TA mode on or off.When TA mode is
on, you will hear the traffic announcement when broadcast. During traffic
announcement,you can interrupt it by short press of TA button (4).Without
switching off the TA mode. By doing so, the set will return to the previous operating
mode. Long press on TA button(4) allows ON/OFF selection of EONTA
LOCAL/EONTA DX
EONTA LOCAL will only allow traffic announcement from strong station to come through.
EONTA DX selection will allow all received announcements to interrupt CD play or
radio listening.
DUAL ZONE OPERATION
This unit is equipped with the advance feature “Dual zone”.This function is useful if
the user want to select different modes of the audio output source for Front and
Rear speakers.The details operation as follow;
ON/ OFF OPERATION
“Off” is the default setting.
• Short press the “2-zone” button on the control pannel or remote control to switch
between Dual zone on or off.The “2-zone” icon will appear on the LCD after Dual
Zone is selected “on”.
TO SELECT FRONT/ REAR SOURCES
• Once “on” is selected, short press the “AUDIO” button repeatedly to change
between the F-zone (front) and the R-zone (rear) sources.
• If front zone “F-zone” is selected, user has 10 seconds ot navigate through different
modes by using the volume button.
ENGLISH
4
INTER AMPLIFIER ON/OFF (INTER AMP)
This is an option selection for users to turn the unit’s built in Amplifier system on or
off.The default is “off”, this is useful for users if an external amplifier is connected and
you don’t want audio output of the built in amplifier system.
PROGRAMMABLE TURN-ON VOLUME (VOL PGM)
This option allows selection of the volume level, the radio will automatically assume
when turning on.“Vol PGM 12” is the default setting, which will turn on the radio at
the volume level as adjust in the VOL PGM.To program a specific turn on volume
level, use the volume control button to select “Volume Level” within 5 seconds.
BEEP TONE
The beep tone feature allows the selection of an audible beep tone when a button is
pressed.“Beep tone on” is the default setting. Use the volume up/down button to
select the “Beep tone off” option.
AUDIO OPERATIONS
Press the button (8) “AUDIO” to enter the sound set up. Press button (8) “AUDIO”
momentarily to move forward to the next option.The menu can also be navigated by
using the buttons (20) Tuning Up or Tuning Down to move to the next or previous
option. Once the desired option appears on the display, adjust that option by rotating
the volume control within 5 seconds.The following options can be adjusted:
VOLUME
To increase the volume rotate the volume knob (8) clockwise, to decrease the volume
rotate the volume knob counterclockwise.
SUBWOOFER (SUBWOOFER LEVEL)
Rotate the volume knob (8) to select the desired volume level from “00” to “12”.
NOTE:The subwoofer level control will only appear in the Audio Menu if the
“Subwoofer” function is activated and a subwoofer speaker is connected.
Press button (3) “SUB-W” to activate the subwoofer function. Press again to turn off.
SUB-W LPF (SUBWOOFER LOW PASS FILTER)
Rotate the volume knob (8) to select the desired Low Pass Filter function: Flat, 80Hz,
120Hz or 160Hz.
NOTE :The subwoofer level control will only appear in the Audio Menu if the
“Subwoofer” function is activated and a subwoofer speaker is connected.
IX-BASS (IX-BASS LEVEL)
Rotate the volume knob (8) to select the desired Bass Boost function: low, mid or high.
NOTE :The iX-Bass function will only appear in the Audio Menu if the “iX-Bass”
function is activated. Press button (5) “IX-BASS” to activate the iX-Bass function.
Press again to turn off.
BASS (BASS LEVEL)
Rotate the volume know (8) to select the desired Bass level from “-6” to “+6”.
BASS-CFQ (BASS CENTER FREQUENCY)
Rotate the volume knob (8)
to select the desired Bass
center Frequency to 60Hz,
80Hz, 100Hz or 200Hz.
BASS-Q (BASS Q FACTOR)
Rotate the volume knob (8)
to select the desired Bass-Q
Factor to 2N, 1N, 1W or
2W.
MIDDLE (MIDDLE LEVEL)
Rotate the volume knob
(8) to select the desired
Middle Level from “-6” to
“+6”.
MID-CFQ (MIDDLE
CENTER FREQUENCY)
Rotate the volume knob
(8) to select the desired
Middle Range Center
frequency to 500Hz,
1KHz, 1.5KHz or 2.5KHz.
MIDDLE-Q (MIDDLE Q
FACTOR)
Rotate the volume knob
(8) to select the desired Middle-Q Factor to 2N, 1N, 1W or 2W.
TREBLE
Rotate the volume knob (8) to select the desired Treble level from “-6” to “+6”.
TRE-CFQ (TREBLE CENTER FREQUENCY)
Rotate the volume knob (8) to select the desired Treble center Frequency to 10KHz,
12.5KHz, 15KHz or 17.5KHz.
BALANCE
Rotate the volume knob (8) to adjust the Balance between the right and left speakers
from R12 (full right) to L12 (full left).
FADER
Rotate the volume knob (8) to adjust the Fader between the front and rear speakers
from R12 (full rear) to F12 (full front).
RADIO OPERATIONS
BAND SELECTION
At tuner mode, press button (19) “BAND” shortly to select the desired band.The
reception band will change in the following order: FM1, FM2, FM3 and MW
Level
(dB)
Frequency (Hz
)
F
0
5
10
15
10
100
1.10
3
1.10
4
1.10
5
2W
1W
1N
2N
Level
(dB)
Frequency (Hz)
15.0
12.5
10.0
7.5
2.5
0.0
5.0
10.0 100.0 1.0K 10.0K
2W
1W
1N
2N
MCD 770 manual.qxd 22-10-2007 09:08 Pagina 4
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Caliber MCD 770 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Caliber MCD 770 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Caliber MCD 770

Caliber MCD 770 Snelstart handleiding - Nederlands, Deutsch, English - 11 pagina's

Caliber MCD 770 Gebruiksaanwijzing - English - 14 pagina's

Caliber MCD 770 Snelstart handleiding - Français, Italiano, Português, Espanõl, Polski, Svenska - 11 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info