Handleiding Caldera Utopia - serie 2019 (pagina 12 van 44) (Engels)

784912

Verklein

Vergroot

Pagina terug

1/44

Pagina verder

Page 9

FUNDAMENTALS OF

WATER MAINTENANCE

• Testing: Test the water weekly or each time the spa is used with

convenient FRESHWATER 5-way Test Strips or more accurate liquid/

tablet reagent test kit per instructions. Critical parameters: sanitizer

level, pH, Calcium Hardness (CH), and Total Alkalinity (TA). Store test

equipment in a dark, cool, dry place to maintain potency.

• Water Filtration: The filtration used in CALDERA spas helps keep

water clean by circulating sanitizer and removing waste from the spa.

Regularly inspect and clean filters for peak performance.

• Chemical Balance/pH Control: It is important to adjust the primary

water parameters (Total Alkalinity, Calcium Hardness, pH) into the

recommended ranges so that they are stabilized or balanced. Balance

the water chemistry every time you fill the spa with new water and

then during the life of that body of water. Keeping the water in balance

prevents damage by

holding the pH in a safe

range and preventing

calcium scale formation

on spa equipment. A low

pH can damage metal

components whereas a high

pH can cause high levels

of calcium to form scale.

Your dealer should provide

a detailed water chemistry

orientation soon after your

new spa is filled for the very

first time.

• The following three water components must be kept in balance to avoid

damage to the spa. Do balance these components in the order they

are listed here as each will help you balance the next using a minimum

amount of chemicals.

1. Calcium Hardness – is the measure of the amount of dissolved

calcium in the water. Low levels can make the water corrosive

and high levels cause scale formation of spa components. The

recommended CH reading is between

75 - 150 ppm. A hardness between 25 - 75 ppm is recommended

with the FRESHWATER Salt System If the CH level is too

high, lower it with the VANISHING ACT calcium remover per

instructions. Once in balance, the CH reading normally remains

stable until new water is added. Great care must be taken when

filling the spa from a water softener to ensure that the calcium

remains in balance and avoids damage to the spa.

2. Total Alkalinity (TA) - TA is a measure of the water’s ability to

resist changes of pH or buffer capacity. A low TA allows the pH to

fluctuate easily. The recommended TA reading is between

40 - 120 ppm. To raise the TA, use pH/Alkalinity Up (sodium

hydrogen carbonate). To lower the TA, use pH/Alkalinity Down

(sodium bisulfate). Once the TA is balanced, it normally remains

stable until the next drain/refill. We recommend you check the TA

reading once per month. Raising/lowering the TA may cause the

pH readings to fluctuate widely. Ignore the pH readings on the test

strip while you are balancing the TA.

3. pH - The pH is the measure of the acidity and alkalinity.

Maintaining the proper pH level will optimize the effectiveness of

the sanitizer, preventing damage to the spa and physical discomfort

for spa users. A low pH dissipates sanitizer, causes corrosion, and

irritates spa users. A high pH level will neutralize sanitizer, promote

scaling and cloud water. The recommended pH reading is between

7.2 - 7.8. To lower the pH level, use pH/Alkalinity Down (sodium

bisulfate). To raise the pH level, use pH/Alkalinity Up (sodium

carbonate).

• Water Conditioners: Spa fill water varies from location to location and

user to user, therefore it is important to consult with your dealer for an

appropriate program.

a. VANISHING ACT – High levels of calcium and some minerals

can be removed from the water with the single use VANISHING

ACT. High calcium levels can cause scale formation on the spa

equipment and shell (see page 11 for instructions).

b. CLEAN SCREEN pre-filter –The CLEAN SCREEN pre-flter

should be used at every fill and top-off to remove contaminants

from the fill water, especially iron, copper, and manganese. Many

water sources including well water contain high concentrations of

minerals that can cause staining of the shell and plastics.

c. Stain and Scale control – For water high in calcium and minerals,

it may be necessary to use an anti-scalant like Stain and Scale

control. As water evaporates from your spa and new water is

added, the amount of dissolved minerals like calcium, copper, iron,

and manganese will increase. (Minimize evaporation by keeping

the cover on the spa whenever possible.) High iron or copper

content in the water may produce green or brown stains on the spa.

d. Foam Inhibitors - Soap is introduced into the spa water from users’

bodies and swimming apparel and can cause the spa water to

foam when the jets are used. Low levels of calcium hardness

(soft water) can increase foaming. Although ozone can oxidize

soap residual, it may become necessary to add foam Inhibitors to

suppress the foam. Excessive soap in the water may require a

water change to resolve.

• Oxidizers: Ozone and Monopersulfate (MPS) are oxidizers used to

prevent the buildup of contaminants, maximize sanitizer efficiency,

minimize combined chlorine, and improve water clarity. They are to

be used in conjunction with EPA registered sanitizers. The high output,

Corona Discharge ozone system produces a high concentration of

ozone which is injected into the spa water 24 hours per day. Chlorine-

Free Oxidizer, Monopersulfate (MPS) is a granular oxidizing chemical.

• Sanitizers: Maintaining the recommended residual level of a national

registered sanitizer at all times will decrease the occurrence of unsafe

bacteria and viruses in your spa water. The recommended Free

Available Chlorine (FAC), the amount of available chlorine sanitizer,

is 3.0 - 5.0 ppm. A low FAC can allow bacteria and viruses to grow

rapidly in the warm water, and a high FAC can cause discomfort to the

user’s eyes, lungs, and skin. Each sanitizer carries its own instructions

regarding how much to use and when to add it to the spa water.

Consult your dealer for their recommendations and instructions on

proper sanitizing of the spa.

WATKINS WELLNESS recommends the following sanitizer:

• FRESHWATER Salt System

• Concentrated chlorinating granules (dichlor)

Liquid chlorine (sodium hypochlorite)

WATKINS WELLNESS also approves the following sanitizers:

• Biguanide

WARNING: DO NOT use tri-chlor chlorine, bromo-chloro-dimethyl-

hydantoin (BCDMH), or any type of compressed bromine or chlorine,

acid or any type of sanitizer which is not recommended by WATKINS

WELLNESS.

Water Quality and Maintenance

ALKALINE SPA

WATER

(SCALING

ZONE)

ADD pH

DECREASER

TO LOWER

ADD pH

INCREASER

TO RAISE

ACIDIC SPA

WATER

(CORROSIVE

ZONE)

COMFORT

ZONE IDEAL

Caldera Utopia - serie 2019 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Caldera Utopia - serie 2019

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info