696340
31
Verklein
Vergroot
Pagina terug
1/47
Pagina verder
31
KRISS
3
- TECNA
3
- EVO
3
- ELISE
3
- SHELL
3
- CRISTAL
3
- GLASS - VERVE AT - PRETTY AT - TITANIA AT - VENERE AT - BREEZE AT
Please further assure you that your network is endowed with an efficient earth connection: if it does not exist or if it is not
efficient, please endow you with one in compliance with the law.
Connect the supply cable first on the back of the stove (see Fig. 74) and then at a wall electric socket.
Fig. 74 - Electric socket with master switch
The master switch O/I (see Fig. 74) is to open only to switch the stove on, otherwise it is advisable to keep it off.
Do not use extension cables.
If the feeder cable is damaged, it must be replaced by an authorized technician.
When the stove is not going to be used for a long period of time, it advisable to remove the plug from the socket on the wall.
5.17 CONNECTION TO THE EXTERNAL THERMOSTAT
The stove works through a thermostat probe placed in its inner. If you desire, the stove can be connected to an external room
thermostat. This operation must be executed by an authorized technician.
Connect the wires from the external thermostat to the "Term opt" terminal on the stove board. Activate the external thermostat
(default setting OFF) as indicated below:
Press the "menu" button.
Scroll with the arrows to "Settings".
Select by pressing "menu".
Scroll with the arrows again to "Ext.Thermostat".
Select by pressing "menu".
Press the - + buttons.
To activate the external thermostat select "on".
Press the "menu" button to confirm.
5.18 STOVE CALIBRATION AND DEPRESSION MEASUREMENT
This stove has a pickup point positioned on the tank in order to measure the depression of the combustion chamber and verify its
proper operation.
To do this, proceed as follows:
Remove inspection casing "C" from the back of the stove (see Fig. 75).
Loosen nut "D" from the bottom of the tank, near the pressure switch.
Connect a digital pressure switch with a tube to detect the depression (see Fig. 76).
Load the feed screw via appropriate function.
Start the stove and set "Fire" at power 1 (the start of this stove lasts from 8 to 10 minutes to ensure minimum draught).
Compare the read values with those on the table.
Change power every 10 minutes and wait for it to stabilise.
Access the user menu and, if necessary, change the parameters.
31

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cadel Shell 3 - 2019 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cadel Shell 3 - 2019 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Cadel Shell 3 - 2019

Cadel Shell 3 - 2019 Installatiehandleiding - Nederlands - 48 pagina's

Cadel Shell 3 - 2019 Gebruiksaanwijzing - Nederlands - 44 pagina's

Cadel Shell 3 - 2019 Installatiehandleiding - Deutsch - 48 pagina's

Cadel Shell 3 - 2019 Gebruiksaanwijzing - Deutsch - 44 pagina's

Cadel Shell 3 - 2019 Gebruiksaanwijzing - English - 44 pagina's

Cadel Shell 3 - 2019 Installatiehandleiding - Français - 60 pagina's

Cadel Shell 3 - 2019 Gebruiksaanwijzing - Français - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info