819977
6
Verklein
Vergroot
Pagina terug
1/160
Pagina verder
44
Lighting the appliance using the piezo
To light up the appliance using the piezo igniter, push and turn the control knob in an anticlockwise
direction until you hear a click. If the gas does not ignite on the first spark, turn the control knob back to its
“OFF” position. Try again, by pushing and turning the control knob anti-clockwise until you hear a click. If
the gas has not ignited in the first two to three seconds you should close the control valve by turing
the control knob back to its “OFF” position.
Wait approximately thirty seconds to let any accumulated gas within the burner escape. Repeat the above
process if necessary until the flame ignites. The flame should normally light up within the first one to two
seconds.
Lighting up using a BBQ lighter
When starting cold, the appliance may be lit from the top prior to fitting the desired cooking surface onto
the fat pan. When lighting up a hot appliance, it is recommended that this be done by sticking a barbecue
lighter through one of the vent holes underneath the burner, until it is in line with the burner (DO NOT
place the BBQ lighter through the large hole directly underneath the burner). Ignite the BBQ lighter. Whilst
the BBQ lighter is lit, push and turn the control knob anti-clockwise to light the burner.
General
Once the appliance is lit, the fl ame intensity may be adjusted by turning the valve knob anti-clockwise to
reduce the flame, or clockwise to increase the fl ame.
The fully closed position is at the furthest clockwise position. To rotate the valve from the fully closed
position, it is necessary to first press the control knob in just enough to move out of the lock mechanism. While holding the control knob in,
turn it in an anti-clockwise direction. Once the spindle has moved out of the lock position it is no longer necessary to keep the control knob
pressed in and it can be rotated freely to the desired flame setting.
When cooking food with a high fat content, flaring may occur if the selected heat setting is too high. Should this happen, turn the heat down
until the flaring ceases.
The flame may be observed through the inspection hole provided for this purpose on the side of the fat pan.
Aer use, first close the control valve on the gas cylinder (if applicable). When the flame has gone out, close the control valve on the device
Do not move the appliance when in use. It is unsafe practice to move the appliance whilst lit and may cause flaring.
When not in use remove the gas cartridge
Cooking tips:
A feature of the Skottel BBQ is that it offers various heat zones (See Fig.5). This is very useful as some foods cook quicker than others and the
food that is ready first, can be moved to the cooler areas of the dish to keep warm whilst the balance of the food is still cooking.
NOTE! If the appliance is used in windy conditions, the dome must be used as a wind shield, and placed in position (as shown in fig. 6).
Medium Hot Cool
Locators
Fig. 4 Fig.5
Fig. 3
Push & turn le
to ignite.
Fig.6
WIND
Only applicable to
8910-10, 8910-20,
8910-30, 8910-40,
8910-50, 8910-70
& 8910-80
EN
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cadac Carri Chef 50 - 8910 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cadac Carri Chef 50 - 8910 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 5.76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info