481956
17
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
17
The SAT Page (Fig. 25)
As seen earlier in “Getting Started”, the SAT page view is used to identify the
quality or strength of the satellite signals being received by the unit. The Info
Boxes on the bottom of the satellite page are used to identify your location,
shown as Location (latitude, longitude) and Altitude (above sea level). The
items displayed on the satellite page view are fixed, and cannot be changed
by the user, so there is are no options or settings menus for this page.
The SET Page
The SET page user options (Fig. 26) include all the following:
User Profile (Fig. 27)-select to customize and set various display options.
You can save different sets of screen configurations that are best suited to
your different activities.
To save a profile, select an activity from the list (hiking/camping, etc), then
press the right arrow to save your current display configuration under that
name. The checkmark indicates the current active profile. One custom user
profile may bet setup and selected in addition to the other five pre-named
profiles for common activities (Hiking/Camping, Hunting, Inland Boating,
Ocean Boating, Geocaching, Custom). You may also choose to “Reset to
default” instead of saving your current settings as one of the
profiles-this
restores the original factory default screen configuration (display options
for all pages).
GPS-press the right button and select GPS satellite reception “ON” to for
normal GPS operation, select “OFF” to conserve battery life if you are not going
to be navigating and only want to use the XM weather or entertainment
services, or while you are getting more familiar with your ONIX indoors
where GPS reception is not possible. Two other options are available:
WAAS (Wide Area Augmentation System)- turning WAAS on will provide
slightly better GPS accuracy in the United States. As this can decrease
battery life, you may want to keep it turned off for most normal navigation
activities.
Cold Start Receiver-press OK to re-activate GPS satellite reception (“cold
start”). This will force the ONIX to clear the satellite almanac” information,
which is stored automatically during the first power-on to speed up the
process of choosing the best GPS satellites for your usual starting area.
If this almanac data is no longer valid, it will cause longer startup times.
Enabling a cold start is recommended if you have re-located to a new
area that is over 300 miles away from your last power-on position. Note
that this will only take effect the next time the unit is powered on-there is
no advantage or reason to force a cold start if the unit has already locked
onto satellites in a reasonable amount of time, and are still within about a
300-mile radius of the location where you first powered up the ONIX.
Compass-options to select your preferred navigation display units (Degrees,
Cardinal Letter, or Mils) and North Reference (True or Magnetic).
EXPLORING THE PAGES : The SAT and SET Pages
Fig 25.
SAT Page
Fig 26.
SET Page
Options List
Fig 27.
SET Page
User Profiles
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bushnell Onix 400-2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bushnell Onix 400-2 in de taal/talen: Engels als bijlage per email.

De handleiding is 8,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info