481954
14
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
14
EXPLORING THE PAGES : SET
GPS-press the right button and select GPS satellite reception “ON” to for normal
GPS operation, select “OFF” to conserve battery life if you are not going to be
navigating, or while you are getting more familiar with your ONIX indoors where
GPS reception is not possible. Two other options are available:
WAAS (Wide Area Augmentation System)- turning WAAS on will provide
slightly better GPS accuracy in the United States. As this can decrease battery
life, you may want to keep it turned off for most normal navigation activities.
Cold Start Receiver-press OK to re-activate GPS satellite reception. is will
force the ONIX to clear the satellite almanac” information, which is stored
automatically during the first power-on to speed up the process of choosing the
best GPS satellites for your usual starting area. If this almanac data is no longer
valid, it will cause longer startup times. Enabling a cold start is recommended
if you have re-located to a new area that is over 300 miles away from your last
power-on position. Note that this will only take effect the next time the unit is
powered on-there is no advantage or reason to force a cold start if the unit has
already locked onto satellites in a reasonable amount of time, and are still within
about a 300-mile radius of the location where you first powered up the ONIX.
Compass-options to select your preferred navigation units (Degrees, Cardinal
Letter, or Mils) and North Reference (True or Magnetic).
• Display-allows adjustment of display Brightness and Breadcrumbs Color.
Sounds-options to mute all sounds, set volume, and mute or select different tones
for: key beep, destination arrival and warning sound.
•Time-sets time format: 24 hr or AM/PM, North American time zone, UTC
(Universal Time) Oset (for other time zones), daylight savings (on/o/auto).
Units-selecting distance/speed units, elevation units, GPS position format,
pressure, temperature, and datum (default for North America is WGS84-see the
glossary for more info.)
•Language- selects language used for all display menus and option screens.
•Owner Info- allows you to input personal information for identification (this
can be shown during startup if desired). Please refer to the “Using the Text Tool
section on page 19 for details on how to enter letters and numerals.
•Reset Data-(Fig. 14) allows you to reset (clear) all existing data, or speed, distance,
time, or breadcrumb data individually or in any combination. Press OK to select
any item or items, then go down to “Reset Selected” and press OK to reset it/them.
After resetting, the checkmarknext to the item(s) will disappear, and a “Reset
Complete” message is shown. A common use of reset is to clear old “breadcrumb
trail marks from a past trip to the same area.
• Unit Info-provides hardware/software version numbers, serial number, etc.
Fig 12. SET Page
Options List
Fig 13. SET Page
User Proles
Fig 14. SET Page
Reset Data
Options
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bushnell Onix 350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bushnell Onix 350 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,05 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info