768254
29
Verklein
Vergroot
Pagina terug
1/53
Pagina verder
Bugaboo car seat in
collaboration with Nuna
meet your bugaboo turtle
by Nuna
Nuna Baby Essentials, Inc.
70 Thousasnd Oaks Blvd. |
Morgantown, PA 19543
1.855.NUNA.USA | nunababy.com
www.nunababy.com
www.bugaboo.com
car seat collaboration
1901_Bugaboo_Turtle_User_Guide_US_Cover_(V2).indd 11901_Bugaboo_Turtle_User_Guide_US_Cover_(V2).indd 1 30-01-19 10:4130-01-19 10:41
bugaboo turtle by Nuna is based on the Nuna PIPA model
bugaboo fox bugaboo lynx
compatible with:
nothing like a Bugaboo
2
IMPORTANT — Read these
instructions carefully before use and
keep for future reference.
3
Contents
Product Information
Product Registration 4
Recall Information 4
Warranty 5
Contact 5
Child Usage Requirements 5
Warnings 6
Vehicle Compatibility 9
Infant Car Seat Parts List 12
Base Parts List 14
Product Overview 16
Product Use 26
Installation 30
Cleaning and Maintenance 49
4
Product Information
Model Number:_____________________________________________________________________________________________
Manufactured in (date): ______________________________________________________________________
Product Registration
Please fill in the above information. The model
number and the manufactured in date are located
on a label on the bottom of your child restraint. Fill
out the prepaid registration postcard attached to
the seat pad and mail it today.
Child restraints could be recalled for safety
reasons. You must register this restraint to be
reached in a recall. Send your name, address,
e-mail address if available and the child restraint’s
model number and manufacturing date to:
Nuna Baby Essentials Inc.
70 Thousand Oaks Blvd.
Morgantown, PA 19543
or call 1.855.NUNA.USA
or register online at:
www.nunababy.com/register-car-seat
Recall Information
For recall information, call the U.S. Government’s
Vehicle Safety Hotline at: 1.888.327.4236
(TTY: 1.800.424.9153) or go to
http://www.NHTSA.gov
5
Warranty
We have purposely designed our high-quality
products so that they can grow with both your child
and your family. Because we stand by our product,
our gear is covered by a custom warranty per
product, starting from the day it was purchased.
Please have the proof of purchase, model number
and manufactured in date available when you
contact us.
For warranty information please visit:
www.nunababy.com/usa/warranty
Contact
For replacement parts, service, or additional
warranty questions, please contact our customer
service department.
In the USA:
infousa@nunababy.com
www.nunababy.com
1.855.NUNA.USA
Child Usage Requirements
This child restraint is suitable for use with children
who meet the following requirements:
Weight: 4 to 32 lb (2 to 14.5 kg)
Height: less than 32 inches (81 cm)
It is recommended to keep your child rear facing as
long as possible, until at least 2 years old.
6
WARNING
Failure to follow these warnings, instructions
and labels on the child restraint could result
in serious injury or death.
A child’s safety is your responsibility.
NEVER leave your child unattended.
Read all instructions before use of this
child restraint or installation in a vehicle.
In addition, read the vehicle owner’s
manual for information on child restraint
installation.
Use the bottom of the base for storage of
the instruction manual.
Register your child restraint with the
manufacturer.
This child restraint can ONLY be used in a
rear facing position when using in a vehicle.
The child restraint cannot be properly
secured in a forward facing position, and
will be unsafe. Use only with children who
weigh between 4 and 32 pounds (2 and
14.5 kg) and whose height is 32 inches (81
cm) or less. Exceeding these height and
weight limits is unsafe.
Cover the child restraint when your vehicle
is parked in sunlight. Parts of a child
restraint can become very hot if left in the
sun, and can burn a child’s skin. Check for
hot parts before putting your child in the
child restraint.
Secure this child restraint with the vehicle’s
child restraint anchorage system if
available, or with a vehicle belt.
7
Replace this child restraint if it has been
involved in a crash, even if it was minor and
there appears to be no damage to the child
restraint.
Snugly adjust the belts provided with
this child restraint around your child. If
straps are not snugly adjusted, child may
be ejected from seat in the event of an
accident.
A snug strap should not allow any slack.
It lies in a relatively straight line without
sagging. It does not press on the child’s
flesh or push the child’s body into an
unnatural position.
EXPIRATION DATE Check the label on the
underside of the base or child restraint for
expiration date information.
FALL HAZARD Child’s activity can move
carrier. NEVER place carrier on counter
tops, tables, or any other elevated surface.
Always stay within arm’s reach whenever
carrier is not on floor/ground. Be sure
handle locks into position before lifting
carrier.
STRANGULATION HAZARD Children
have strangled in loose or partially buckled
harness straps. Fully restrain the child even
when carrier is used outside the vehicle.
SUFFOCATION HAZARD Infant carrier can
roll over on soft surfaces and suffocate
child. Never place carrier on beds, sofas, or
other soft surfaces.
ALWAYS check child restraint to base
connection.
8
DO NOT allow anyone who has not read the
instruction manual to install or use this child
restraint.
DO NOT allow child restraint or handle to
contact the vehicle interior (side of car door
or seat in front) when installed on base.
DO NOT use child restraint if it has frayed
or cut harness straps, or is damaged in
any way. To find out if damaged parts are
replaceable, call 1-855-NUNA-USA.
DO NOT use any products or accessories
with this child restraint unless they are
approved by Nuna for use with this child
restraint. Doing so may be unsafe and may
void the warranty.
DO NOT leave child restraint and base
in vehicle when uninstalled, even when
unoccupied. In a crash, it could become
a projectile and injure other vehicle
occupants.
NEVER modify any part of the child restraint.
NEVER use clothing or blankets that
interfere with providing a properly
tightened harness. An unsecured or
improperly harnessed child can come out of
the restraint during a crash. Place blankets
over child AFTER harness has been
properly tightened.
NEVER place carrier on top of a shopping
cart. Carrier will not be properly secured
and could fall.
Only use with Bugaboo strollers Fox and
Lynx.
9
Vehicle Compatibility
You MUST read and understand ALL child restraint
related instructions and warnings in your vehicle
owner’s manual to correctly and safely use this
child restraint in your vehicle.
This child restraint can ONLY be installed on
vehicle seats that face forward. DO NOT install in
seats that face to the sides or rear of the vehicle.
NEVER install this child restraint rear facing in a
vehicle seating position with a frontal air bag unless
it is turned off. Airbags inflate with great force and
can cause severe injury to a child’s neck and spine.
If your vehicle is equipped with passenger side air
bags, check your vehicle owner’s manual for child
restraint installation instructions.
According to accident statistics, children are
safer when properly restrained in the rear seating
positions than in the front seating positions.
Refer to your vehicle owner’s manual to determine
if the belts in your vehicle lock by switching the
seat belt’s retractor OR if they have a locking latch
plate that locks the vehicle’s seat belt so they will
hold the child restraint tightly without loosening.
10
Vehicle belts that CANNOT BE USED with your
child restraint:
1 - Motorized Belts (Automatic)
These should not be used unless the shoulder
belt can be removed, the lap belt is locked and
use is allowed by the vehicle manufacturer.
2 - Dual Retractor Lap/Shoulder Belts
If allowed by the manufacturer, the lap belt
only may be used to secure the child restraint
in accordance with this manual and the vehicle
owner’s manual.
3 - Non-Locking (ELR) Lap Belts
This belt locks in a crash or sudden stop and
should only be used with a belt shortening clip.
Contact your vehicle manufacturer if needed.
4 - Airbag/Inflatable Belts
This belt cannot be used to install this child
restraint.
5 - Door Mounted Belts
This belt cannot be used to install this child
restraint.
6 - Lap Belts forward of Seat Bight
This belt (where the seat bottom and seat back
meet) should not be used to install this child
restraint.
11
1
2
3
4
5
6
12
Infant Car Seat Parts List
1 Canopy
2 Infant Insert
3 Chest Clip
4 Buckle and Crotch
Belt
5 Adjuster Button
6 Adjuster Strap
7 Lap Belt Guides
8 Integrated stroller
adapters*
9 Handle Button
10 Stroller Release
Button
11 Shoulder Pads
12 Seat Cover
13 Handle
14 Shoulder Belt Guide
15 Harness Slots
16 Base Attachment
Bar
17 Harness Straps
18 Splitter Plate
19 Base Attachment
Bar
*compatible with Bugaboo Fox & Bugaboo Lynx strollers
13
1
12
13
11
10
9
8
7
15
16
17
18
19
2
3
4
5
6
14
14
Base Parts List
1 Lock Off
2 Rigid LATCH
(lower attachments)
3 Primary Rigid
LATCH Release
Button
4 Secondary Rigid
LATCH Release
Button
5 Rigid LATCH Guides
6 Locking Clip
7 Stability Leg
8 Stability Leg
Indicator
9 Stability Leg Adjust
Button
10 Car Seat Release
Button
11 Bubble Indicator
12 Instruction Manual
Storage
13 Stability Leg
Storage
14 Recline Adjustment
15
1
2
3
7
11
10
9
8
13
14
4
5
6
12
Product Overview
Bugaboo Smart Visor
1 - Flip out visor from underneath the front canopy
bow.
2 - Pull out the extendable ‘Smart Visor’ from in
between the two visor layers and attach it to
the magnets on each corner at the front of the
car seat.
Canopy
3 - To remove the canopy, press the button in the
canopy mount and pull the canopy bow out.
Shoulder Pads
4 - Shoulder pads are removable and are not
necessary for safety.
Infant Insert
5 - The infant insert can be used as necessary,
to provide a snug fit for small babies. The low
birth weight pillow can be used in the infant
insert for even smaller babies, but should
be removed once a snug fit can be achieved
without it, at approximately 11 lb.
16
1
2
3
4
5
17
Handle Adjustment
1 - The carrier handle can be adjusted to 3
positions.
2 - To adjust the handle position, squeeze handle
buttons on both sides.
3 - Rotate handle until it clicks into any of the 3
positions. Handle can be used in vehicle in any
locked position.
Be sure handle is locked in the carry position
before lifting child restraint by handle. An
unlocked handle could move unexpectedly,
causing injury to child.
Handle MUST NOT contact the vehicle interior
(side of car or seat in front) when installed.
18
12
3
19
Seat Pad
1 - Pull out the fastening pieces underneath the
edge of the seat.
The best way to work this area (as some seat
pads feel more tight in this area than others)
is to pull the fabric towards the front of the seat
at one corner. Once you have one corner out,
you can easily work the other side out.
2 - Remove the harness from the splitter plate.
3 - Remove the seat pad from the stroller release
buttons as shown.
4 - Grasp the seat pad at the bottom of the
adjuster button as shown and pull the seat
pad out from under one edge of the adjuster
button. Work around the adjuster button to
release the remainder of the seat pad.
20
1
2
3
4
21
Shoulder Belts
1 - Tighten harness to fit snugly on child’s
shoulders. It is snug if you cannot pinch a fold
in the strap.
2 - Harness straps must be at or just below
shoulders.
3 - To adjust shoulder harness height, remove
child and loosen harness.
4 - Turn child restraint over and remove one
harness loop from metal splitter plate.
5 - Pull loose ends of harness out through slots
and place in correct slot.
22
1
2
3
4
5
23
1 - Re-attach harness loops to splitter plate.
2 - Do not allow harness to pass over bars.
Repeat process for second shoulder harness strap.
Crotch Belt
3 - Identify crotch belt slot that will achieve a snug
fit for your child. Three crotch belt positions
are provided to achieve a snug fit as your baby
grows. Change crotch belt slot as necessary.
4 - The position shown provides the smallest fit.
Crotch belt is threaded through rear slot and
up through front slot as shown.
5 - This position provides a medium fit. Crotch belt
is threaded into rear slot as shown.
6 - This position provides the largest fit. Crotch
belt is threaded through front slot as shown.
24
1
2
3
4
5
6
25
Product Use
1 - Top of child’s head is at least 1” below top of
child restraint.
Securing Child in Child Restraint
2 - Loosen harness by pressing on adjuster button
while pulling on the harness straps.
3 - Press button to release the buckles. Separate
chest clip and spread harness straps apart.
4 - Place child in child restraint in seated position.
5 - The child should be seated against both the
back and bottom of the seat with no gap
behind the child. Do not allow child to slouch.
Gently guide child’s arms through harness loops.
6 - Insert buckle tongues into buckle.
26
1
2
2
1
2
3
4
5
6
27
1 in
(25 mm)
1 - Listen for clicks. Pull on buckle to verify it is
latched.
2 - Snap the chest clip together and temporarily
slide towards buckle for tightening of harness.
3 - Tighten harness by pulling on the adjuster
strap. Pull any excess harness webbing through
the buckle towards the child’s shoulders and
pull on the adjuster strap. This may need to be
repeated several times for proper fit.
Verify that the harness is snug around the
child’s waist and shoulders.
4 - Position the chest clip at child’s armpit level.
Check that Child is Secure
Buckle is fastened.
Harness straps are not twisted.
Harness is snug – A snug harness cannot be
pinched, and should not allow any slack.
Chest clip is level with armpits.
Harness straps must be at or just below child’s
shoulders to avoid injury. If harness slots need
to be moved, see Shoulder Belts section.
Make sure that nothing interferes with the
harness. Make sure harness is snug around
child and lays flat. Serious injury or death could
occur to a child that is not secured properly.
If child is not secured properly, child could
be ejected in a sudden stop or crash, resulting
in serious injury or death.
28
click
1
2
3
4
29
click
Installation
If child is not secured properly, child could
be ejected in a sudden stop or crash, resulting
in serious injury or death.
Base Installation Using Rigid LATCH
(Lower Attachments)
1 - Place vehicle in park and on level ground.
2 - Position base in a forward facing vehicle seat.
Use recline adjustment to position bubble in
indicator. Adjust base so bubble touches line.
3 - Use recline adjustment to achieve correct
angle for installation. Recline adjustment locks
into position.
4 - To release, press down on lock button.
5 - When installing with the base, additional
stability can be achieved by using the stability
leg. For instructions on using the stability
leg when installing the base, see stability leg
section.
6 - If necessary, install rigid LATCH guides on
vehicle LATCH lower anchor bars.
30
1
2
3
4
5
6
31
1 - Rotate Rigid LATCH (lower attachments) down.
2 - Hook Rigid LATCH onto vehicle LATCH lower
anchor bars.
3 - Confirm proper installation by pulling on the
base AND also seeing that green is indicated
on the connectors.
The Rigid LATCH (lower attachments) must be
attached and locked onto the vehicle anchor bars.
Check Installation
Base should not move side to side or forward
more than 1” at belt path.
Bubble must be touching line. Use recline
adjustment, if needed, to position bubble.
It is acceptable to install with both LATCH (lower
attachments) and the vehicle belt.
Attaching Child Restraint to Base
4 - After child is properly secured in child
restraint, press child restraint on base and
listen for a click. Pull on child restraint to verify
installation.
DO NOT allow child restraint to contact the
vehicle interior (side of car or seat in front)
when installed.
5 - To release the child restraint, squeeze the car
seat release button (1) located on the base,
while pulling the child restraint up (2).
32
2
1
1
2
3
4
5
33
click
click
click
1 - To remove the base, first push the base toward
the vehicle seat with a light force.
2 - As you push the base toward the vehicle seat,
squeeze the secondary (1) and primary rigid
LATCH release buttons (2).
*For ease of release, push the secondary button first, then the
primary button.
3 - Then pull the base off of the lower anchor bars.
Installation Using Lap & Lap/Shoulder Belt
4 - Place vehicle in park and on level ground.
5 - Position base in a forward facing vehicle seat.
Use recline adjustment to position bubble in
indicator. Adjust base so bubble touches line.
6 - Use recline adjustment to achieve correct
angle for installation.
34
1
2
1
2
3
4
5
6
35
1 - Recline adjustment locks into position. To
release press down on lock button. When
installing with the base, additional stability
can be achieved by using the stability leg. For
instructions on using the stability leg when
installing the base, see Stability Leg section.
2 - Route the vehicle belt through the opening in
the base labeled ‘belt here.
3 - Buckle the vehicle belt. Both the shoulder AND
lap belt must be under the blue lock off and
belts must lay flat.
4 - While pressing the base into the vehicle seat
(1), tighten the vehicle belt by pulling straight
along the belt path (2), keeping both belts
laying flat in the lock off.
5 - While the shoulder belt is tight, hook the
bottom of blue lock off and press to close the
lock off on the shoulder and lap belt.
If vehicle only has a lap belt, then put lap belt
under blue lock off.
Check Installation
Belts must be tight.
Base should not move side to side more than
1” at belt path.
Bubble must be touching line.
Belts and buckles must not interfere with
attachment of child restraint to base.
Vehicle belts must lay flat under lock off.
It is acceptable to install with both LATCH (lower
attachments) and the vehicle belt.
36
1
2
1
2
3
4
5
37
click
1 - After child is properly secured in child
restraint, press child restraint on base and
listen for a click. Pull on child restraint to verify
installation.
DO NOT allow child restraint to contact the
vehicle door or seat in front of it.
2 - To release the child restraint, squeeze the car
seat release button (1) located on the base,
while pulling the child restraint up (2).
3 - To remove the base, lift up on the lock off.
4 - Unbuckle the vehicle belt and un-route the
shoulder and lap belt from the base.
Then remove the base.
Stability Leg
Refer to vehicle owner’s manual to determine if
stability leg can be used over a vehicle storage
compartment.
5 - Unfold the stability leg from storage
compartment.
6 - Do not use if stability leg lifts base off seat.
Do not use stability leg to recline the base.
The recline adjustment feature is meant to
recline the base.
Always store stability leg when not in use.
38
2
2
2
1
1
2
3
4
5
6
39
click
1 - After correctly installing the base on the vehicle
seat, press the stability leg adjust button to
extend the stability leg to the floor.
2 - Stability leg should make firm contact with the
vehicle floor.
3 - Indicators should show green.
When the stability leg indicator shows red this
means the stability leg is in the wrong position.
Make sure the stability leg is secure and makes
firm contact with the vehicle floor. The stability
leg indicator shows green when it is properly
contacting the floor of the vehicle.
The stability leg has 12 positions.
This seat is safe to use with stability leg in
use or stored for both rigid LATCH or vehicle
belt installation.
Child Restraint Only Install
This child restraint can be installed without a base
in 3 different ways.
4 - Place vehicle in park and on level ground.
Position child restraint so that child is facing
the rear of the vehicle.
Only install in a forward facing vehicle seat.
40
1
2
3
4
41
1 - Option 1: Route the vehicle lap belt under both
lap belt guides and buckle the vehicle belt.
Allow shoulder belt to lay against vehicle seat
back as shown.
2 - Option 2: Route the shoulder belt around the
back of the child restraint passing through the
blue shoulder belt guide.
3 - Option 3: If your vehicle does not have a
shoulder belt, the lap belt only can be used.
4 - Adjust the angle of the child restraint. A rolled
up towel or foam pool noodle may be used to
help adjust the amount of recline.
5 - Angle is correct when blue line on child
restraint (located on the label on the side of the
child restraint) is level with ground.
6 - Tighten vehicle belt while pushing child
restraint firmly into vehicle seat. Lock the
vehicle belt. Refer to vehicle owner’s manual
for instructions. If you cannot lock the vehicle
belt, you must use the provided locking clip.
Tension the vehicle belt as much as possible,
checking that it is not loose or twisted.
Check Installation
Blue line must be level with ground.
Vehicle belt must be buckled, tight and
must stay locked.
Child restraint should be stable and not move
side to side more than 1 inch at belt path.
42
1
2
3
4
5
6
43
Locking Clip Use
If you determine that you need to use a locking clip,
tighten the buckled belt by pushing down hard on
the infant child restraint and pulling hard on the
shoulder belt.
While pushing down on child restraint, pinch the
two straps together behind the buckle tongue.
Unbuckle the vehicle belt without allowing it to slip.
1 - Connect lap and shoulder belts with locking
clip.
2 - Reroute vehicle belt if necessary. Check that
lap belt does not move by pulling and pushing
hard on infant restraint. If belt loosens or
lengthens, repeat procedure.
The locking clip should be 1/2 inch (12.5 mm)
from the vehicle buckle.
1/2 in
(12.5 mm)
12
44
12
Installation in an Aircraft
Position child restraint so that child is facing the
aircraft seat back.
1 - Route the aircraft lap belt under both lap belt
guides and buckle.
2 - Adjust the angle of the child restraint. A rolled
up towel or blanket may be used to help adjust
the amount of recline (1). The angle is correct
when the blue line is level with the floor of the
aircraft (2).
Tighten the aircraft belt while pushing the child
restraint firmly into the seat.
When installing in an airplane using a base, follow
the instructions for vehicle installation with a base
using lap belt only.
This child restraint is certified for use in commercial
aircraft with or without the base. Be sure to contact
your airline prior to travel to discuss their use
policy.
12
45
46
Installation on a Stroller
This carrier can attach smoothly to the Bugaboo
Fox and Bugaboo Lynx strollers without any
additional adapters.
1 - Always apply the brake when placing the car
seat on or releasing it from the stroller.
2 - Click the car seat onto the stroller base with
the child facing parent.
Check Installation
Pull up on carrier to make sure attachment is
secure.
3 - Push the stroller release buttons on both sides
of the car seat simultaneously to release the
car seat.
The locking clip should be 1/2 inch (12.5 mm)
from the vehicle buckle.
Maximum weight per child per car seat on the
stroller is 13 kg (28.6 lbs).
Do not move the stroller and car seat assembly
by the handle of the car seat.
Check that the car seat attachment devices
are correctly engaged before use.
The car seat adapter interface may present a
pinching hazard. Ensure all fingers and
appendages are clear of the car seat adapter
when mounting the car seat.
47
1
2
3
48
Cleaning and Maintenance
Refer to the care label attached to the soft goods
for washing and drying instructions.
DO NOT attempt to remove the foam under the
seat pad.
Use only mild detergent, water and a soft cloth to
clean the infant carrier shell, handle and harness
straps. Air dry.
To clean the buckle: rinse using warm water. DO
NOT use any soaps, solvents or lubricants. Using
anything other than water can cause the buckle to
malfunction. Air dry.
Remove the child restraint from the vehicle seat if
not in use for a long period of time. Put the infant
carrier in a cool, dry place and somewhere your
child cannot access it.
It is normal for fabric to color from sunlight and to
show wear and tear after a long period of use, even
when used normally.
Check regularly if everything functions properly.
If any parts are torn, broken, or missing, stop using
this product.
49
The information contained herein is subject to change without notice. Bugaboo
International BV shall not be liable for technical errors or omissions contained herein.
The purchased product may di er from the product as described in this user guide. Our
most recent user guides can be requested at our service departments or at
www.bugaboo.com.
© 2019 Bugaboo International BV. BUGABOO, BUGABOO FOX, BUGABOO
CAMELEON, BUGABOO BEE, BUGABOO DONKEY, BUGABOO BUFFALO, RUNNER,
BUGABOO BOXER and the Bugaboo logos are registered trademarks. The Bugaboo®
strollers are patented and design protected.
©2019 Nuna Baby Essentials, Inc. Nuna and all associated logos are trademarks.
50
51
52
29

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bugaboo Turtle by Nuna bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bugaboo Turtle by Nuna in de taal/talen: Engels als bijlage per email.

De handleiding is 1,35 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Bugaboo Turtle by Nuna

Bugaboo Turtle by Nuna Gebruiksaanwijzing - Alle talen - 601 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info