678328
101
Verklein
Vergroot
Pagina terug
1/111
Pagina verder
Chapter 8 Troubleshooting
TeraStation Cannot Be Set Up
If the TeraStation could not be located on NAS Navigator2 or connected to through the remote desktop, refer to the
possible causes and corrective actions below:
• Cause 1. The cables are not connected correctly:
The cables are not physically connected, or there may be a contact defect. Reconnect the AC cable and Ethernet
cable and restart both the computer and the TeraStation.
• Cause 2. Security software in the background is blocking communications:
Add an exception to your firewall software, or disable the firewall software completely. Turn off any software
security suite that might include a firewall. Try searching again.
• Cause 3. Wireless and wired adapters are both enabled:
Disable all adapters except for the LAN adapter connected to the TeraStation.
• Cause 4. The Ethernet cable is defective, or the connection is unstable:
Try changing the hub port or Ethernet cable that you use to connect.
• Cause 5. The LAN board, card, or adapter that you are using is defective:
Try changing the LAN board, card, or adapter.
• Cause 6. The LAN board or hub transmission mode has not been set:
Change the transmission mode in the LAN board or hub to "10M half-duplex" or "100M half-duplex". Some LAN
boards or hubs may be unable to connect the network correctly when the transmission mode is set to "Auto
Negotiation".
• Cause 7. A network bridge is installed:
If the network has a network bridge that is not being used, remove it.
• Cause 8. You are searching from a different network:
You cannot conduct searches beyond your local network subnet. Connect the TeraStation to the same network
subnet as the computer performing the search.
• Cause 9. TCP/IP is not operating correctly:
Reinstall the LAN adapter drivers.
• Cause 10. Remote desktop connection software is not installed on your Mac:
If using macOS, download and install "Microsoft Remote Desktop" from the Mac App Store.
Shared Folders Suddenly Do Not Open
If the TeraStation shared folder is assigned and used as a network drive, access to the TeraStation may suddenly fail if
network settings such as IP addresses or groups are changed. If this happens, launch NAS Navigator2 and search the
TeraStation, then double-click the TeraStation icon to open the TeraStation's shared folder.
For macOS, the TeraStation is mounted as a drive icon on the desktop or it is displayed in the sidebar of the Finder.
Shared Folders Cannot Be Accessed or System Is Unstable
This usually happens because too many software applications are running in Windows Storage Server, causing
a memory shortage. Exit or uninstall some of the software running in Windows Storage Server, then restart the
TeraStation.
100
101

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Buffalo TeraStation WSH5000 series bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Buffalo TeraStation WSH5000 series in de taal/talen: Engels als bijlage per email.

De handleiding is 7,33 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Buffalo TeraStation WSH5000 series

Buffalo TeraStation WSH5000 series Gebruiksaanwijzing - Deutsch - 119 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info