697320
13
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
Product details | 13
6 720 816 739 (2015/05)MC 400
2.2.5 Output control
This control strategy is used when the heating system is controlled using
a building management system with a 0-10 V controller output.
Fig. 1 Linear relationship between the 0-10 V signal (U in volts) and
required performance P (in percent with reference to the
maximum system performance)
The connected heat sources are turned on and off according to the
required performance as per the module code as is the case with a serial
standard or serial optimized cascade.
2.2.6 Flow temperature control
This control strategy is used when the heating system is controlled using
a building management system with a 0-10 V controller output.
Fig. 2 Linear relationship between the 0-10 V signal (U in volts) and
required flow temperature
(in percent with reference to the
maximum flow temperature)
The connected heat sources are turned on and off according to the
required flow temperature as per the module code as is the case with a
serial standard or serial optimized cascade.
2.3 Setting the coding card
Fig. 3 Coding card with module status display, and a status display of
the connected heat sources or modules
2.4 Scope of delivery
Fig. 4, page 82:
[1] Module
[2] Bag with strain relief
[3] Installation instructions
2.5 Specifications
The design and operation of this product comply with
European Directives and the supplementary national
requirements. Its conformity is demonstrated by the CE
marking . You can ask for a copy of the declaration of conformity for this
product. For this purpose see the contact address on the back cover of
these instructions.
6 720 809 449-21.1O
P / %
U / V
1
10
100
1,5 10
6 720 809 449-22.1O
/ %
U / V
1
min
max
1,5 10
Coding Module function
0 Off (delivered condition)
1 Serial standard cascade
2 Serial optimized cascade ( Fig. 23, page 85)
3 Serial cascade with peak load coverage
4 Parallel cascade
5 No function
6 External 0-10 V performance control with serial standard cascade
7 External 0-10 V performance control with serial optimized cascade
( Fig. 24, page 86)
8 External 0-10 V flow temperature control with serial standard
cascade
9 External 0-10 V flow temperature control with serial optimized
cascade
10 The module is one of a maximum of 4 subordinate cascade modules.
The higher level cascade modules control the connected heat source
corresponding to the code noted on them ( Fig. 25, page 86).
Table 2 Coding and function
Specifications
Dimensions (W×H×D) 246×184×61mm (further
dimensions Fig. 5, page 82)
Maximum conductor cross-section
230 V terminal
Extra-low voltage terminal
•2.5mm
2
•1.5mm
2
Rated voltages
•BUS
Module mains voltage
User interface
Pumps and mixers
•15VDC
(reverse-polarity-protected)
230 V AC, 50 Hz
•15VDC
(reverse-polarity-protected)
230 V AC, 50 Hz
Fuse 230 V, 5 AT
BUS interface EMS 2 /EMS plus
Power consumption on – standby <1W
Max. output 1100 W
Table 3
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Buderus MC 400 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Buderus MC 400 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 4,41 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info