666606
9
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
Make sure that anyone near the work area is wearing appropriate eye and ear protection.
Do not open the tool or attempt to repair it yourself – contact a specialist or our customer
support. Always use original spare parts.
Intended use
Your air hydraulic riveter is intended for use with blind rivets as shown in table of materials and
measures. Do not use the riveter for knocking or hammering onto blind rivets.
Intended use includes compliance with these instructions. Any other use (other media, use of
force) or user modification (alterations to the tool, use of non-original parts) is incompatible with
the tool’s intended use, and may be dangerous.
Aluminium
Copper
Steel
Stainless
steel
2.4 2.4 2.4 2.4
3.2 3.2 3.2 3.2
4.0 4.0 4.0 4.0
4.8 4.8 4.8
Before you use the tool for the first time
Unpack your air hydraulic riveter and check all of the parts for potential shipping damage.
Dispose of the packaging material or keep it in a place out of children’s reach. Plastic bags and
similar make dangerous toys for children.
Using the tool for the first time
1. Your air hydraulic riveter is equipped with a ¼” compressed air connector. Do not fasten
the the compressed air hose directly to your riveter – use the quick coupling instead for
your own safety.
2. Seal off the end of the quick coupling using Teflon tape before attaching it to the air
connector on your air hydraulic riveter.
3. Your air hydraulic riveter will need a lubricant supply during operation. Drop a little oil into
the compressed air supply or use a mist lubricator before you use the tool. Also refer to
the section on lubrication.
4. Connect the riveting tool to the compressor using a flexible air hose. Set the compressor
a pressure of around 6 bar. Check the air pressure connections for leaks, and turn the
compressor off again.
5. Use a compatible nosepiece to ensure proper operation and flawless riveting –
nosepiece and rivet diameters must match.
6. Screw the safety cap with the retainer nut onto the threads of the end cap by turning it
clockwise. Make sure you line up the the safety cap with the notch facing upwards.
7. Insert the corresponding nosepiece into the frame head.
8. Switch the compressor on.
9. Insert the rivet into the nosepiece. Keep the rivet at right angles to the workpiece to be
riveted. Remember that the rivet hole diameter will be 0.1 mm larger than the diameter of
the rivet.
10. Hold the riveting tool firmly by the grip and pull the trigger for the riveter to drive in the
rivet.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bruder Mannesmann 1595 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bruder Mannesmann 1595 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info