718499
13
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
HELPFUL HINTS
Error message What to do when...
Troubleshooting
6
Message Cause/Remedy
Battery Low! The batteries are low.
If using AAA alkaline batteries: Replace them
with six new AAA alkaline batteries. Do not use
old and new batteries together or mix alkaline
batteries with other battery types.
If using Ni-MH batteries: Charge them fully.
Battery Empty! The installed batteries are running low and
need to be changed for continued operation.
Invalid! • There is no text above the cursor when you
selected [Numbering].
• You selected an invalid character for
[Numbering].
• You selected an invalid number for [Label
Length].
• You entered an invalid value as the label
length while using templates.
No Text! You tried to print a text file when there is no
data stored in the memory.
You pressed when no text is entered.
You pressed + when no text is
entered.
You pressed when no text is entered.
Do not press or when no text was
entered while using templates.
2 Line Limit!/
1 Line Limit!
• Make sure you do not exceed the maximum
number of lines allowed (two).
• You tried to print or preview two lines of text
while 3.5 or 6 mm tape is installed. Install a
larger tape size.
No Cassette! You tried to print, feed or preview a label when
there is no cassette installed.
Cutter Pressed You pressed the tape cutter lever in the middle
of the printing process.
Text Full! Make sure you do not exceed the maximum
number of characters allowed (80 characters
for text, 50 characters for templates. If your
message contains symbols, the maximum
number of characters may be reduced.).
Text Limit!
Change Length
Since the number of entered characters
exceeds the label length, reduce the text, or
select [Auto] as the label length.
No Frame OK? • Printing on 3.5 mm tape with invalid Frame
setting ON.
(Select to print with no Frame,
to cancel.)
Feed OK? Feeding tape after printing when [Chain Print]
is selected. See “Setting Margin”.
Insert 12 mm • Only 12 mm tape cassette is available for
templates.
Wrong Tape!
Use TZe tape
• Use a tape cassette with the mark.
Problem Solution
The display
stays blank
after you have
turned on the
machine.
Check that you installed the batteries with the
positive and negative ends in the correct
position.
• If the batteries are low, replace them with six
new AAA alkaline batteries. Do not use old
and new batteries together or mix alkaline
batteries with other battery types.
• Check that you connected the AD-24ES
adapter correctly.
When the label
is printed out,
there is too
much margin
(space) on both
sides of the text.
See “Setting Margin” in this user's guide and
select [Half] or [Narrow] to have smaller
margins for your label.
The machine
does not print,
or the printed
characters are
not formed
correctly.
• Check that you have inserted the tape
cassette correctly.
• If the tape cassette is empty, replace it.
• Check that you closed the cassette cover
correctly.
The machine's
settings have
reset
themselves.
The batteries may be low. Replace them with
six new AAA alkaline batteries. Do not use old
and new batteries together or mix alkaline
batteries with other battery types.
• When power is disconnected for more than
three minutes, all text and formats in the
display are lost.
A blank
horizontal line
appears
through the
printed label.
There may be some dust on the print head.
Remove the tape cassette and use a dry cotton
swab to gently wipe the print head with an up-
and-down motion. The optional print head
cleaning cassette (TZe-CL3) is also available.
The machine
has “locked up”
(that is, nothing
happens when
a key is
pressed, even
though the
machine is on.)
See “Resetting the machine”.
The power
turns off when
you try to print.
The batteries may be low. Replace them with
six new AAA alkaline batteries. Do not use old
and new batteries together or mix alkaline
batteries with other battery types.
• Check that you inserted the batteries
correctly.
• A wrong adapter is used; the recommended
adapter is the AD-24ES.
The tape does
not feed
correctly or the
tape gets stuck
inside the
machine.
• Check that the end of the tape feeds under
the tape guides.
• The cutter lever is pressed while printing. Do
not touch the cutter lever during printing.
To change the
language
setting.
See "Initial Settings".
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother P-Touch H110 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother P-Touch H110 in de taal/talen: Engels als bijlage per email.

De handleiding is 19,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Brother P-Touch H110

Brother P-Touch H110 Gebruiksaanwijzing - Nederlands - 16 pagina's

Brother P-Touch H110 Gebruiksaanwijzing - Deutsch - 18 pagina's

Brother P-Touch H110 Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info