579580
44
Verklein
Vergroot
Pagina terug
1/133
Pagina verder
2300/2310
• Read this User’s Guide before you start using your P-touch.
• Keep this User’s Guide in a handy place for future reference.
USER’S GUIDE
INTRODUCTION
Thank you for purchasing the P-touch 2300/2310!
Your new P-touch will allow you to create labels and stamps for any need. Its versatility
enables you to design custom labels by choosing from a variety of frame designs and from
many characters sizes and styles. In addition, the five tape widths (1/4” (6 mm), 3/8” (9 mm),
1/2” (12 mm), 3/4” (18 mm) and 1” (24 mm)) and variety of tape colors allow you to print
personalized labels, useful for color-coded filing.
You no longer have to worry about urgent tasks that require professional printing. In the office,
the factory, the lab and the home, the quality and performance of the P-touch 2300/2310
makes it an extremely practical machine.
Finally, as you may want to refer to this User’s Guide occasionally, we suggest that you keep it
in a handy place.
(The PT-2300 and the PT-2310 models are equipped with the same functions; however, only
the PT-2310 includes a carrying case and additional tape.)
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- Changes or modifications not expressly approved by Brother Industries, Ltd. could void
the users authority to operate the equipment.
Patent numbers and patent publication numbers which are related to this product are as
below:
USP4839742 USP4983058 USP5120147
USP4927278 USP5009530
USP4976558 USP5069557
i
CONTENTS
Getting Started
GENERAL DESCRIPTION ................................................................................... 1
GENERAL PRECAUTIONS.................................................................................. 2
BATTERIES ......................................................................................................... 3
OPTIONAL AC ADAPTOR................................................................................. 4
TAPE CASSETTE ................................................................................................. 5
CONNECTING THE P-TOUCH TO A COMPUTER ............................................ 6
INSTALLING P-TOUCH EDITOR ....................................................................... 7
STARTING P-TOUCH EDITOR......................................................................... 16
ATTACHING LABELS ....................................................................................... 19
PRINT HEAD & ROLLERS................................................................................. 20
For Your Information
POWER KEY..................................................................................................... 21
CURSOR KEYS ................................................................................................. 21
CODE, ALT & SHIFT KEYS ............................................................................... 22
SPACE KEY....................................................................................................... 25
RETURN KEY.................................................................................................... 25
TAB FUNCTION .............................................................................................. 26
DELETE KEY ..................................................................................................... 28
LINE OUT FUNCTION..................................................................................... 29
CLEAR FUNCTION .......................................................................................... 30
ACCENT FUNCTION ....................................................................................... 32
SYMBOL FUNCTION....................................................................................... 33
AUTO FORMAT FUNCTION ........................................................................... 35
STAMP FUNCTION.......................................................................................... 36
FONT FUNCTION ........................................................................................... 39
SIZE & WIDTH FUNCTIONS............................................................................ 40
STYLE FUNCTION ........................................................................................... 42
UNDERLINE FUNCTION ................................................................................. 44
FRAME FUNCTION.......................................................................................... 45
TAPE MARGIN FUNCTION ............................................................................. 46
HORIZONTAL ALIGNMENT FUNCTION ........................................................ 47
ii
MIRROR PRINTING FUNCTION...................................................................... 48
LENGTH FUNCTION....................................................................................... 49
AUTO CUT FUNCTION................................................................................... 51
PRINT KEY ....................................................................................................... 52
FEED & CUT FUNCTION................................................................................. 52
NUMBERING FUNCTION ............................................................................... 53
REPEAT PRINTING FUNCTION ....................................................................... 54
MEMORY FUNCTIONS.................................................................................... 56
TROUBLESHOOTING...................................................................................... 60
ERROR MESSAGE LIST..................................................................................... 61
SPECIFICATIONS ............................................................................................. 64
ACCESSORIES .................................................................................................. 65
1
TOP VIEW
BOTTOM VIEW
Getting Started
GENERAL DESCRIPTION
Tape compartment
cover
LCD display
Keyboard
AC adaptor
connector
USB port
Tape exit slot
Battery compartment cover
2
KEYBOARD & LCD DISPLAY
Use only Brother TZ tapes with this machine. Do not use tapes that do not have the
mark.
Do not pull on the tape being fed from the P-touch. This may damage the tape cassette.
Do not use the machine in dusty places, and keep it out of both direct sunlight and rain.
Power keyReturn key
Cursor keys
Delete key
GENERAL PRECAUTIONS
3
Do not expose the machine to high temperatures or high humidity. Never leave it on the
dashboard or in the back of your car.
Do not leave any rubber or vinyl on the machine for an extended period of time. Doing
so may cause staining.
Do not clean the machine with alcohol or other organic solvents. Use a soft, dry cloth
only.
Do not put any foreign objects into or anything on the machine.
To avoid injuries, do not touch the cutters edge.
Use only the AC adaptor (model AD-60) designed exclusively for this machine. Use of
any other adaptor will void the warranty.
Do not try to disassemble the AC adaptor.
When the machine is not being used for a long period of time and it is not necessary to
keep the text files stored in the memory, disconnect the AC adaptor, and remove the bat-
teries to prevent them from leaking and damaging the machine.
When the AC adaptor is connected, unplugging the adaptor from the electrical outlet
before unplugging it from the machine can delete all text files in the memory, even if bat-
teries are installed.
Use eight AA alkaline batteries in this machine.
This portable machine can be used anywhere by installing eight (8)
AA alkaline batteries
.
When you change the batteries, always replace all eight at the same time.
To change the batteries:
1
Remove the battery compartment cover on the back of the machine.
2
If batteries are already installed, remove them.
3
Insert eight new AA alkaline batteries, making sure that their poles point in the correct
direction.
4
Attach the battery compartment cover.
Be sure to insert the new batteries within five minutes of removing the old ones,
otherwise the text shown in the display and any text files stored in the memory will
be lost (unless the machine is plugged into an AC outlet with the AC adaptor).
Remove the batteries and disconnect the AC adaptor if you do not intend to use this
machine for an extended period of time. When the power is disconnected, all text
shown in the display and stored in the memory will be lost.
If the batteries are not installed with their positive and negative poles pointing in
the correct direction, the batteries may leak, overheat or burst, or the print head
may overheat.
BATTERIES
4
The AC adaptor (model AD-60) allows you to use this machine wherever there is an electrical
outlet.
To connect the optional AC adaptor:
1
Insert the plug on the adaptor cord into the connector marked DC IN 9.5V on the right
side of the machine.
2
Insert the plug on the adaptor into the nearest standard electrical outlet.
Only use the AC adaptor designed exclusively for this machine.
Remove the batteries and disconnect the AC adaptor if you do not intend to use this
machine for an extended period of time. When the power is disconnected, all text
shown in the display and stored in the memory will be lost.
When the AC adaptor is connected, unplugging the adaptor from the electrical out-
let before unplugging it from the machine can delete all text files in the memory,
even if batteries are installed.
It is recommended that you use the AC adaptor when printing large fonts on
1” (24 mm)-wide tape since this operation can quickly drain the batteries.
OPTIONAL AC ADAPTOR
5
A single TZ tape cassette is supplied with this unit. However, since TZ tape cassettes are avail-
able for this machine in a wide variety of colors and sizes, it is possible to make distinctive
color-coded and stylized labels.
In addition, this machine has been designed to allow you to change the tape cassettes quickly
and easily.
To change the tape cassette:
1
Lift open the tape compartment cover. The installed cassette is also released.
2
If a tape cassette is already installed, remove it by pulling it straight up.
3
If the ink ribbon in the other tape cassette is loose, use your finger to wind the toothed
wheel in the direction of the arrow on the cassette until there is no slack in the ribbon.
Also, make sure that the end of the tape feeds under the tape guides.
If you are using a new tape cassette provided with a stopper, be sure to remove the
stopper.
4
Insert the tape cassette firmly into the tape compartment, making sure that the entire back
of the cassette touches the bottom of the compartment.
When inserting the tape cassette, make sure that the inner ribbon does not catch on
the corner of the metal guide.
5
Close the compartment cover, then turn on the machine if it is off.
6
Hold down
c
and press
_
once to advance the tape and remove any slack.
TAPE CASSETTE
6
This machine is equipped with a USB port, allowing you to connect the P-touch to your IBM
PC-compatible or Macintosh computer, and print labels and stamps created using the P-touch
Editor software.
The P-touch Editor software and the printer driver must be installed before the P-touch is
connected to the computer or turned on. Follow the installation procedure on pages 7
through 16 to install the P-touch Editor software and the printer driver, and connect the
P-touch to the computer when you are instructed to do so.
A USB interface cable is not included with the PT-2300/2310. When connecting the
P-touch to a computer, use a standard USB cable (high-speed compatible with series A
and B connectors).
To connect the P-touch to the computer:
1
Insert the flat (A) connector on the USB cable into the USB port on the computer.
2
Insert the square (B) connector on the USB cable into the USB port on the right side of the
P-touch.
3
Turn on the P-touch.
The USB cable needed for connecting the P-touch to the computer is not included. Be
sure to use a cable that meets the following specifications.
CONNECTING THE P-TOUCH TO A COMPUTER
A
A
C
C
C
C
B
B
Overmolded
Series “A” Plug
Overmolded
Series “B” Plug
Detail A-A
(Series
A Plug)
Detail B-B
(Series
B Plug)
15.7
7.5
10.5
11.5
12.0 12.0
27.0
32.0
9.0
9.0
Optional Molded
Strain Relief
7
The P-touch Editor software adds even more illustration and layout features to the label-mak-
ing possibilities available with your PT-2300/2310.
Do not connect the PT-2300/2310 to the computer before installing the P-touch Editor
software, otherwise it may not be installed correctly. Be sure not to connect the PT-
2300/2310 until you are instructed to do so.
On an IBM PC-Compatible Computer
To install the P-touch Editor software:
1 Check that your system configuration meets the following requirements.
Computer: IBM PC or compatible
Operating system: Microsoft
®
Windows
®
2000 or pre-installed with Microsoft
®
Win-
dows
®
98/98SE/Me
Hard disk free space: At least 20 MB
A few hundred megabytes of additional free space may be needed when printing
long labels or large amounts of data.
Available memory: Minimum 32 MB
Monitor: VGA or higher graphics card
USB port
CD-ROM drive
2 Insert the P-touch Editor Version 3.1 CD-
ROM into the computer’s CD-ROM drive. A
dialog box automatically appears, allowing
you to select what to install.
If the dialog box does not automatically
appear, double-click “My Computer” on
the desktop, double-click the icon for
the CD-ROM drive containing the CD-
ROM, and then double-click
“Ptsetup.exe” to display the dialog box.
INSTALLING P-TOUCH EDITOR
8
3 Click the top button (P-touch Editor). The
InstallShield
®
Wizard for installing the P-
touch Editor software starts up, and then the
Welcome dialog box appears.
To install just the printer driver, click
the lower button (Printer driver). The
first Driver Setup dialog box appears,
informing you that the PT-2300/2310
printer driver will be installed.
Continue with the procedure in To
install the USB printer driver on page
10.
4 Carefully read the contents of the dialog box,
and then click the Next button to continue.
The User Information dialog box appears.
5 Type the necessary information into the
appropriate boxes (If the information has
already been registered in Windows
®
, it will
automatically appear.), and then click the
Next button. A dialog box appears, asking for
confirmation of the entered information.
9
6 Click the Yes button to register the entered
information. The Setup Type dialog box
appears.
To change the information, click the
No button, and then return to step 5.
7 Select the installation method, and then click
the Next button.
For a Typical or Compact installation
Selecting “Typical” or “Compact”, then
clicking the Next button immediately
starts installation.
Typical: All of the basic options
(P-touch Editor Version 3.1, clip
art, Auto Format templates, Help,
and 13 fonts) are installed.
Compact: Only P-touch Editor Version
3.1 is installed.
For a Custom installation
Selecting “Custom”, then clicking the
Next button displays a dialog box that
allows you to select which options to
install. Only the options with a check
mark beside them will be installed. In
addition to the basic options listed for a
Typical installation, the User’s Guide can
also be installed.
10
1) Select which options to install.
Editor: The P-touch Editor Version 3.1 software
Clip Art: The illustrations for the P-touch Editor Version 3.1 Clip Art func-
tion
Fonts: The 13 fonts
Auto Format
Templates: The templates for the Auto Format function
User’s Guide: The User’s Guide (HTML) for the P-touch Editor Version 3.1 (The
User’s Guide can also be viewed from the CD-ROM.)
Help: The help files for P-touch Editor Version 3.1
If the Change button can be clicked while an option is selected, sub-components
can be selected. Click the Change button to display the Select Sub-components
dialog box, and then select the sub-components that you wish to install by putting
a check mark beside them. If certain options or sub-components are not installed,
some P-touch Editor functions may not be available. After selecting the desired
sub-components, click the Continue button.
2) Click the Next button to begin installation.
8 After P-touch Editor is installed, a dialog box
appears, allowing you to select whether or
not to install the printer driver.
To install the printer driver, click the Yes but-
ton. The first Driver Setup dialog box
appears, informing you that the
PT-2300/2310 printer driver will be installed.
Continue with the procedure in
To install the USB printer driver below.
If the printer driver is already installed, click
the No button, restart the computer, and then
remove the CD-ROM from the CD-ROM
drive.
To install the USB printer driver:
With Plug-and-Play, new devices connected to the system are detected, and their drivers are
automatically installed. If the PT-2300/2310 is to be connected through the USB port, its
driver will be installed with Plug-and-Play. Be sure to read the installation instructions
described below before installing the file supplied on the CD-ROM.
Be sure not to connect the PT-2300/2310 until you are instructed to do so.
11
1 Click the Next button. A dialog box appears,
instructing you to connect the PT-2300/2310
to the computer.
2 Connect the PT-2300/2310 to the computer
using a USB interface cable as described on
page 6, and then turn on the PT-2300/2310.
A dialog box appears, showing that the
printer driver has been installed.
3 Click the Finish button. A dialog box
appears, showing that installation is finished.
4 Select “Yes, I want to restart my computer
now.”, click the Finish button to restart the
computer, and then remove the CD-ROM
from the computer.
12
To replace, add or delete the printer driver:
1 Turn off the PT-2300/2310, and then disconnect it from the computer.
2 Insert the P-touch Editor Version 3.1 CD-ROM
into the computer’s CD-ROM drive. A dialog
box automatically appears, allowing you to
select what to install.
If the dialog box does not automati-
cally appear, double-click “My Com-
puter” on the desktop, double-click the
icon for the CD-ROM drive containing
the CD-ROM, and then double-click
“Ptsetup.exe” to display the dialog
box.
3 Click the bottom button (Printer driver). A
Driver Setup dialog box appears, allowing
you to select whether to replace, add or
delete the PT-2300/2310 printer driver.
4 Select the desired operation, and then click
the Next button.
If “Replace with new Brother PT-2300/
2310” is selected, the previously
installed printer driver is deleted, and
replaced with a new one. Select this
option when upgrading the printer
driver, or when running Windows
2000 and changing to a PT-2300/2310
with a different serial number.
If “Add Brother PT-2300/2310” is selected, a new printer driver is added. With a
USB connection on Windows
®
98/Me, only a port is added without adding it as a
new printer. Select this option when connecting and using multiple PT-2300/2310s
with the same computer.
5 If “Replace with new Brother PT-2300/
2310” or “Add Brother PT-2300/2310” was
selected: A dialog box appears, instructing
you to connect the PT-2300/2310 to the
computer.
13
Connect the PT-2300/2310 to the computer
using a USB interface cable as described on
page 6, and then turn on the PT-2300/2310.
A dialog box appears, showing that the
printer driver has been installed.
Select “Yes, restart immediately.”, and then
click the Finish button to restart the com-
puter.
If “Delete Brother PT-2300/2310” was
selected: A dialog box appears, asking for
confirmation to delete all PT-2300/2310
printer drivers.
Click the Yes button. A dialog box appears,
showing that the printer drivers have been
deleted.
Click the Finish button.
If a dialog box appears, explaining that
the computer should be restarted,
select the option for restarting the
computer, and then click the Finish
button.
14
On a Macintosh Computer
The Mac version of the software is for a Mac with an English operating system. If the software is
installed on a Mac with an operating system in a different language, the software may not run properly.
To install the P-touch Editor software:
1 Check that your system configuration meets the following requirements.
Computer: Macintosh, Power Macintosh or iMac
Operating system: Mac OS 8.6 or later
*This software is only compatible with Mac OS X classic.
Hard disk free space: At least 20 MB
A few hundred megabytes of additional free space may be needed when printing
long labels or large amounts of data.
Available memory free space: Minimum 24 MB
USB port
CD-ROM drive
*The application is supplied on a CD-ROM; therefore, the computer should be equipped
with a CD-ROM drive.
2 Connect the PT-2300/2310 to the Macintosh using a USB interface cable. Be sure to leave
the PT-2300/2310 turned off.
3 Turn on the Macintosh.
4 Insert the P-touch Editor Version 3.1 CD-ROM into the computer’s CD-ROM drive.
5 Double-click the P-touch Editor 3.1
Installer icon in the folder that appears.
6 After the installer starts up, select the
installation method.
For a basic installation
Clicking the Install button immediately
starts installing the most basic options.
(Some clip art illustrations are not
installed.)
About 20 MB of available hard-disk
space is needed to begin installation. In
order to install all options, about 120
MB of available hard-disk space is
needed. If enough hard-disk space is
available, click the Install button.
15
For a Custom installation
Clicking the Custom Install button dis-
plays a dialog box that allows you to
select which options to install.
Only the options with a check mark
beside them are installed. Select the
options that you wish to install, and
then click the Install button.
In order to print from the PT-2300/
2310, “PT-2300/2310 Driver” must
be selected for installation.
7 When the installation is finished and the
following dialog box appears, click the
Quit button.
8 When the dialog box appears, asking if
you wish to restart the computer, click the
Restart button to restart the computer.
16
To select the PT-2300/2310 as the printer:
1 Turn on the PT-2300/2310.
2 Pull down the Apple menu and select
“Chooser” to display the Chooser window.
3 In the list on the left, click the PT-2300/
2310 icon. Then, select the appropriate
printer from the list on the right.
4 Close the Chooser window to confirm
your settings.
To delete P-touch Editor Version 3.1 and the printer driver:
When deleting the printer driver, be sure that the P-touch is turned off and unplugged.
1 Drag the P-touch Editor Ver3.1 folder to the Trash icon.
2 In the System Folder, open the Extensions folder.
3 Drag the PT-2300/2310 icon and the USB PT-2300/2310 Extension icon to the Trash icon.
4 In the System Folder, open the Preferences folder.
5 Drag the PT-2300/2310 Prefs icon to the Trash icon.
The P-touch Editor application makes it easy for anyone to design and print labels for almost
any need imaginable.
On an IBM PC-Compatible Computer
To start up P-touch Editor:
By clicking the P-touch Editor icon:
Double-click the “P-touch Editor 3.1” icon in the “P-touch Editor 3.1” group window.
STARTING P-TOUCH EDITOR
17
With the Start button:
1 Click the Start button in the taskbar to display the Start menu.
2 Select “Programs”.
3 Select “P-touch Editor 3.1”.
4 Click “P-touch Editor 3.1”.
With Windows Explorer:
1 Start up Windows Explorer.
2 Select the drive and directory where P-touch Editor is installed.
3 Double-click “Ptedit3.exe”.
After P-touch Editor is started, the following window is displayed.
On a Macintosh Computer
To start up P-touch Editor:
Double-click the “P-touch Editor Ver3.1” icon in the “P-touch Editor Ver3.1” folder
installed on the computer.
After P-touch Editor is started, the following window is displayed.
Title bar
Rulers
Cursor
Menu bar
Standard toolbar
Property dock
Layout area
Draw toolbar
Print area
Object dock
Status bar
Status bar
Menu bar
Layout
area
Draw toolbar
Print
area
Database toolbar
Property dockObject dock
Print toolbar
Title barRulers
21
The power key ( o ) is located in the lower-right corner of the keyboard. If batteries have
been installed or the machine has been plugged in using the optional AC adaptor, the previ-
ous session’s information is displayed when the machine is turned on. This feature allows you
to stop work on a label, turn off the machine, and return to it later without having to re-enter
the text.
The machine will automatically turn off if no key is pressed within 5 minutes (30 minutes if the
machine is connected to a computer). The machine’s internal memory stores the current ses-
sion’s information and displays it when you turn on the machine again.
To turn on the machine:
Press o. The previous session’s information appears in the LCD display.
To turn off the machine:
Press o. The current session’s information is stored in the internal memory.
The machine’s LCD display shows two rows of 9 characters; however, the text that you create
can be up to 99 characters long. You can review and edit your text by using the cursor keys to
move the cursor so that different parts are shown in the display.
LEFT CURSOR KEY
To move the cursor one character to the left:
Press f once.
To move the cursor several characters to the left:
Hold down f until the cursor moves to the desired position.
To move the cursor to the beginning of the current line:
Hold down c and press f.
For Your Information
POWER KEY
CURSOR KEYS
27
To set the tab length:
1 Hold down c and press W once. The current tab length is displayed.
2 Press h or e until the desired length is displayed or use the number keys to type in
the length.
To change the units (inches or centimeters) used to display the tab lengths, press
M until the desired units are displayed.
3 Press r.
To add a tab:
Hold down c and press Q once. The tab mark ( ) appears in the text to indi-
cate the position of the tab.
If the text in front of a tab extends past the point where the next section of text
should start, the text will instead start at the following tab position.
For example, if the tab length is set to 1.2” (3.0 cm) and the following text is typed
in:
the label shown below will be printed
EXAMPLE
To set the tab length to 1”:
1
Hold down c and press W once.
2:
JKLMNOPQRST U
1:
ABC DEF GHI
Margin Tab (1.2 (3.0 cm)) Tab (1.2 (3.0 cm)) Margin
1.2inch
TAB LENGTH
Caps
Alt
30
When clearing the display before entering new text, the Clear function can be used to choose
whether all of the text is erased and all format functions (Font, Size, Width, Style, Underline,
Frame, Tape margin, Alignment, Tab length, Mirror printing, and Length) are returned to their
default settings, or whether just the text is erased.
To delete all of the text and return all formats to their default settings:
1 Hold down c and press *.
2 Press h or e until TXT&FORMAT is selected (flashing).
To return to the text without erasing anything, press *.
3 Press r.
EXAMPLE
To clear the text and formats:
1
Hold down c and press *.
2 Press h until TXT&FORMAT is flashing.
3 Press r.
CLEAR FUNCTION
2:
345–6789_
1:
Garden
Caps
Alt
TEXT ONLY
TXT&FORMAT
Caps
Alt
TEXT ONLY
TXT&FORMAT
Caps
Alt
1:
_
Caps
Alt
34
To type in a symbol:
1 Hold down c and press a. A row of symbols appear in the display.
2 Press h or e to display different rows of symbols and press f or w until the
desired symbol appears enlarged within the frame in the middle of the display.
3 Press r. The symbol is added to the text.
To type in a series of symbols, hold down c before pressing r. Then, con-
tinue adding symbols by selecting them as explained in steps
2
and
3
, and hold-
ing down c while pressing r. Press just r after selecting the last
symbol in the series.
EXAMPLE
Group Symbol
1 ÜÆæ Ã ã e˜Õõ °
2+×÷= §
23
234
[]
3
4
5
To add the symbol “ :
1
Hold down c and press a.
2 Press h or e until the row containing
appears, then press
f or w until
appears in the frame.
˜
E
TM
R C
ÆæÃã
Caps
Alt
Ü
Caps
Alt
36
To select a preset format:
1 Hold down c and press Y once. The currently selected setting appears in the dis-
play.
2 Press h or e to select the desired setting.
To return to default settings, press _.
3 Press r to apply the selected setting.
The Length indicator comes on if any setting other than DEFAULT is selected.
EXAMPLE
The Stamp function allows you to quickly and easily create your own stamp stencil films for
customized stamps. After inserting a stamp film cassette, select this function to automatically
center the text and adjust the tape length and margins to a perfect format for the pre-inked
stamp film holders. Since the stamp holder is reusable, just make a new stamp stencil film and
replace the one in the holder.
To make a stamp:
1 Type in the text, and then insert a medium (3/4” (18-mm)-wide) or a large (1” (24-mm)-
wide) stamp film cassette.
2 Hold down c and press U once. The message “STAMP FORMAT?” appears in the
display.
To select the AUDIO CASSETTE setting:
1
Hold down c and press Y.
2 Press h or e until the AUDIO CASSETTE
setting is displayed.
3 Press r.
Caps
Alt
DEFAULT
CASSETTE
AUDIO
Caps
Alt
STAMP FUNCTION
40
The character size can be adjusted using both the Size and Width functions. Since the charac-
ter size that can be used depends on the width of the tape, the following table shows the char-
acter sizes that can be used with each tape width.
The default size setting is AUTO and the default width setting is MEDIUM. The currently
selected size setting is always shown by the indicators above the display. In addition, when a
width setting other than MEDIUM is selected, the Width indicator comes on.
With the AUTO size setting, the machine compares your text with the width of the installed
tape and automatically adjusts the characters to the largest possible size. However, seven other
point sizes are also available, and each can be printed with any of the three width settings.
Tape widths Sizes (in points)
1/4 (6 mm) 6, 9, 12
3/8 (9 mm) 6, 9, 12, 18
1/2 (12 mm) 6, 9, 12, 18, 24
3/4 (18 mm) 6, 9, 12, 18, 24, 36, 42
1 (24 mm) 6, 9, 12, 18, 24, 36, 42
Size
setting
(in points)
Width setting
NARROW
Width setting
MEDIUM
Width setting WIDE
6
9
12
18
24
36
42
SIZE & WIDTH FUNCTIONS
41
To change the size setting:
1 While holding down c, press 2 once, and keep c held down to display the
current size setting.
2 While still holding down c, continue pressing 2 until the desired size setting is
displayed.
The current size setting is shown by the size indicators at the top of the display.
3 Release c to apply the selected size setting to the entire text.
With the AUTO setting selected and 3/4” (18-mm) or 1” (24-mm)-wide tape
installed, text consisting of just one line of only capital letters (and no accented
characters) will be printed with a character size of 52 points. If 1/2” (12-mm)-wide
tape is installed, the text will be printed with a character size of 29 points.
EXAMPLE
To select the 24 point size setting:
1
While holding down c, press 2 once,
and keep c held down.
2 While still holding down c, continue pressing
2 until 24 is displayed.
3 Release c.
AUTO
SIZE
Caps
Alt
24
SIZE
Caps
Alt
44

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother P-Touch 2310 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother P-Touch 2310 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info