451237
3
Verklein
Vergroot
Pagina terug
1/50
Pagina verder
ADVANCED
USER’S GUIDE
MFC-J220
MFC-J265W
MFC-J410
MFC-J415W
Version 0
UK/IRE/GEN
i
User's Guides and where do I find it?
Which manual? What's in it? Where is it?
Safety and Legal Please read the Safety Instructions before you
set up your machine.
Printed / In the box
Quick Setup Guide Read this Guide first. Follow the instructions for
setting up your machine and installing the
drivers and software for the operating system
and connection type you are using.
Printed / In the box
Basic User's Guide Learn the basic Fax, Copy, Scan and
PhotoCapture Center™ operations and how to
replace consumables. See troubleshooting tips.
Printed / In the box
Advanced User's Guide Learn more advanced operations: Fax, Copy,
security features, printing reports and
performing routine maintenance.
PDF file /
Documentation
CD-ROM
Software User's Guide Follow these instructions for Printing, Scanning,
Network Scanning (MFC-J265W and
MFC-J415W only), PhotoCapture Center™,
PC-Fax Send, and using the Brother
ControlCenter utility.
PDF file /
Documentation
CD-ROM
Network User's Guide
(MFC-J265W and
MFC-J415W only)
This Guide provides more advanced
information for configuring the Wireless network
connections. In addition, find information about
network utilities, network printing,
troubleshooting tips and supported network
specifications.
PDF file /
Documentation
CD-ROM
ii
Table of Contents
1 General setup 1
Memory storage..................................................................................................... 1
Automatic Daylight Saving Time............................................................................1
Sleep Mode ...........................................................................................................2
LCD display ...........................................................................................................2
LCD Contrast...................................................................................................2
Setting the Dim Timer for the backlight ..........................................................3
Mode Timer............................................................................................................3
2 Security features 4
TX Lock .................................................................................................................4
Setting and changing the TX Lock password ..................................................4
Turning TX Lock on/off .................................................................................... 5
3 Sending a fax 6
Additional sending options.....................................................................................6
Sending faxes using multiple settings .............................................................6
Contrast ...........................................................................................................6
Changing fax resolution...................................................................................7
Setting your changes as a new default............................................................7
Restoring fax settings to the factory settings...................................................7
Additional sending operations................................................................................8
Sending a fax manually ...................................................................................8
Dual Access (Monochrome only).....................................................................8
Broadcasting (Monochrome only)....................................................................8
Real Time Transmission................................................................................10
Overseas Mode ............................................................................................. 10
Checking and cancelling waiting jobs............................................................11
4 Receiving a fax 12
Additional receiving operations............................................................................12
Printing a reduced incoming fax ....................................................................12
Out of Paper Reception .................................................................................12
5 Dialling and storing numbers 13
Voice operations..................................................................................................13
BT Call Sign (U.K. only)................................................................................. 13
Additional dialling operations...............................................................................14
Combining Quick Dial numbers ..................................................................... 14
Additional ways to store numbers........................................................................15
Storing Speed Dial numbers from Outgoing Calls......................................... 15
Storing Speed Dial numbers from the Caller ID history................................. 15
Setting up groups for broadcasting................................................................ 16
iii
6Printing reports 18
Fax reports...........................................................................................................18
Transmission Verification Report...................................................................18
Fax Journal (activity report) ...........................................................................18
Reports ................................................................................................................19
How to print a report ......................................................................................19
7 Making copies 20
Copy settings .......................................................................................................20
Stop copying..................................................................................................20
Changing copy speed and quality .................................................................20
Enlarging or reducing the copied image ........................................................21
Making N in 1 copies or a poster (Page Layout) ..........................................22
Sorting copies using the ADF (MFC-J410 and MFC-J415W only) ................23
Adjusting Density ...........................................................................................24
Setting your changes as a new default..........................................................24
Restoring all settings to the factory settings ..................................................24
8 Printing photos from a memory card 25
PhotoCapture Center™ operations .....................................................................25
Memory cards folder structures .....................................................................25
Print Images.........................................................................................................26
Print Index (Thumbnails) ...............................................................................26
Printing Photos ..............................................................................................27
Print All Photos ..............................................................................................27
DPOF printing................................................................................................28
PhotoCapture Center™ print settings..................................................................28
Print Quality ...................................................................................................29
Paper options ................................................................................................29
Adjusting Brightness, Contrast and Colour....................................................30
Cropping ........................................................................................................30
Borderless printing.........................................................................................31
Date Print.......................................................................................................31
Setting your changes as a new default..........................................................31
Restoring all settings to the factory settings ..................................................31
Scan to a memory card........................................................................................32
How to set a new default ...............................................................................32
How to reset to factory settings .....................................................................32
iv
A Routine maintenance 33
Cleaning and checking the machine.................................................................... 33
Cleaning the outside of the machine ............................................................. 33
Cleaning the machine’s printer platen ........................................................... 34
Checking the ink volume ...............................................................................34
Packing and shipping the machine......................................................................35
B Glossary 38
C Index 42
v
1
1
1
Memory storage 1
Even if there is a power failure, you will not
lose the settings you have chosen using the
Menu key because they are stored
permanently. Also, you will not lose your
settings in the FAX, COPY and
PHOTO CAPTURE mode key menus if you
have chosen Set New Default. You may
have to reset the date and time.
Automatic Daylight
Saving Time
1
You can set the machine to change
automatically for daylight saving time. It will
reset itself forward one hour in the Spring and
backward one hour in the Autumn. Make sure
you have set the correct date and time in the
Date&Time setting.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose
Auto Daylight.
Press OK.
d Press a or b to choose Off (or On).
Press OK.
e Press Stop/Exit.
General setup 1
Chapter 1
2
Sleep Mode 1
You can choose how long the machine will
remain idle (from 1 to 60 minutes) before it
goes into sleep mode. The timer will restart if
any operation is carried out on the machine.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Sleep Mode .
Press OK.
d Press a or b to choose 1Min, 2Mins,
3Mins, 5Mins, 10Mins, 30Mins or
60Mins.
Press OK.
e Press Stop/Exit.
LCD display 1
LCD Contrast 1
You can adjust the LCD contrast for a sharper
and more vivid display. If you are having
difficulty reading the LCD, try changing the
contrast setting.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose LCD Contrast.
Press OK.
e Press d or c to change lighter or darker.
Press OK.
f Press Stop/Exit.
General setup
3
1
Setting the Dim Timer for the
backlight 1
You can set how long the LCD backlight stays
on after the last key press.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose LCD Settings.
Press OK.
d Press a or b to choose Dim Timer.
Press OK.
e Press a or b to choose 10Secs,
20Secs, 30Secs or Off.
Press OK.
f Press Stop/Exit.
Mode Timer 1
The machine has four temporary mode keys
on the control panel: FAX, SCAN, COPY and
PHOTO CAPTURE. You can change the
amount of time the machine takes after the
last Scan, Copy or PhotoCapture operation
before it returns to Fax mode. If you choose
Off, the machine stays in the mode you used
last.
a Press Menu.
b Press a or b to choose
General Setup.
Press OK.
c Press a or b to choose Mode Timer.
Press OK.
d Press a or b to choose 0Sec, 30Secs,
1Min, 2Mins, 5Mins or Off.
Press OK.
e Press Stop/Exit.
4
2
TX Lock 2
TX Lock lets you prevent unauthorized
access to the machine.
While TX Lock is On, the following operations
are available:
Receiving faxes
While TX Lock is On, the following operations
are NOT available:
Sending faxes
Copying
PC printing
Scanning
PhotoCapture
Operation from the Control panel
Note
If you forget the TX Lock password,
please call your Brother dealer for service.
Setting and changing the
TX Lock password 2
Note
If you have already set the password, you
will not need to set it again.
Setting the password 2
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Miscellaneous.
Press OK.
d Press a or b to choose TX Lock.
Press OK.
e Enter a 4-digit number for the password.
Press OK.
f When the LCD shows Verify:,
re-enter the password.
Press OK.
g Press Stop/Exit.
Security features 2
Security features
5
2
Changing the password 2
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Miscellaneous.
Press OK.
d Press a or b to choose TX Lock.
Press OK.
e Press a or b to choose Set Password.
Press OK.
f Enter a 4-digit number for the current
password.
Press OK.
g Enter a 4-digit number for a new
password.
Press OK.
h When the LCD shows Verify:,
re-enter the password.
Press OK.
i Press Stop/Exit.
Turning TX Lock on/off 2
Turning TX Lock on 2
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Miscellaneous.
Press OK.
d Press a or b to choose TX Lock.
Press OK.
e Press a or b to choose Set TX Lock.
Press OK.
f Enter the registered 4-digit password.
Press OK.
The machine goes offline and the LCD
shows TX Lock Mode.
Turning TX Lock off 2
a Press Menu.
b Enter the registered 4-digit password.
Press OK.
TX Lock is automatically turned off.
Note
If you enter the wrong password, the LCD
shows Wrong Password and stays
offline. The machine will stay in TX Lock
mode until the registered password is
entered.
6
3
Additional sending
options
3
Sending faxes using multiple
settings 3
When you send a fax you can choose any
combination of these settings: resolution,
contrast, scan size etc.
a Press (FAX).
The LCD shows:
b Press a or b to choose a setting you
want to change.
Press OK.
c Press a or b to choose an option.
Press OK.
d Go back to b to change more settings.
Note
Most settings are temporary and the
machine returns to its default settings after
you send a fax.
You can save some of the settings you
use most often by setting them as default.
These settings will stay until you change
them again. (See Setting your changes as
a new default on page 7.)
Contrast 3
If your document is very light or very dark, you
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Choose Light when sending a light
document.
Choose Dark when sending a dark
document.
a Press (FAX).
b Press a or b to choose Contrast.
Press OK.
c Press a or b to choose Auto, Light or
Dark.
Press OK.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
When you send a colour fax.
When you choose Photo as the Fax
Resolution.
Sending a fax 3
Fax Resolution
Contrast
Standard
Press Start
Enter Number
Sending a fax
7
3
Changing fax resolution 3
The quality of a fax can be improved by
changing the fax resolution.
a Press (FAX).
b Press a or b to choose
Fax Resolution.
Press OK.
c Press a or b to choose the resolution
you want.
Press OK.
Note
You can choose four different resolution
settings for monochrome faxes and two
for colour.
If you choose S.Fine or Photo and then
use the Colour Start key to send a fax,
the machine will send the fax using the
Fine setting.
Setting your changes as a
new default 3
You can save the fax settings for
Fax Resolution, Contrast,
Real Time TX and Glass ScanSize you
use most often by setting them as default.
These settings will stay until you change
them again.
a Press (FAX).
b Press a or b to choose the menu option
that you want to change and press OK.
Then press a or b to choose the new
option.
Press OK.
Repeat this step for each setting you
want to change.
c After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d Press 1 to choose Yes.
e Press Stop/Exit.
Restoring fax settings to the
factory settings 3
You can restore the fax settings
Fax Resolution, Contrast,
Real Time TX, and Glass ScanSize,
that you have changed, to the factory
settings.
a Press (FAX).
b Press a or b to choose
Factory Reset.
Press OK.
c Press 1 to choose Yes.
d Press Stop/Exit.
Monochrome
Standard Suitable for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than Fine
resolution.
Photo Use when the document has
varying shades of grey or is a
photograph. Photo has the
slowest transmission.
Colour
Standard Suitable for most typed
documents.
Fine Use when the document is a
photograph. The transmission
time is slower than Standard
resolution.
Chapter 3
8
Additional sending
operations
3
Sending a fax manually 3
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
Note
(MFC-J410 and MFC-J415W only)
To send a multiple page fax, use the ADF.
a Press (FAX).
b Load your document.
c To listen for a dial tone pick up the
handset of the external telephone.
d Dial the fax number.
e When you hear the fax tone, press
Mono Start or Colour Start.
If you are using the scanner glass
press 1 on the machine to send a fax.
f Replace the handset.
Dual Access
(Monochrome only) 3
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
Broadcasting
(Monochrome only) 3
Broadcasting is when the same fax message
is automatically sent to more than one fax
number. You can include Groups, Speed Dial
numbers, and up to 50 manually dialled
numbers in the same broadcast.
After the broadcast is finished, a Broadcast
Report will be printed.
a Press (FAX).
b Load your document.
c Press a or b to choose Broadcasting.
Press OK.
Sending a fax
9
3
d You can add numbers to the broadcast
in the following ways:
Press a or b to choose Add Number
and press OK. Enter a number using
dial pad.
Press OK.
Press a or b to choose Speed Dial
and OK. Press a or b to choose
Alphabetical Order or
Numerical Order and OK.
Press a or b to select a number and
OK.
e After you have entered all the fax
numbers by repeating step d, press
a or b to choose Complete.
Press OK.
f Press Mono Start.
Note
If you did not use up any of the numbers
for Groups, you can “broadcast” faxes to
as many as 90 different numbers.
The available memory will vary depending
on the types of jobs in the memory and the
number of locations used for
broadcasting. If you broadcast to the
maximum numbers available, you will not
be able to use dual access.
If the Out of Memory message
appears, press Stop/Exit to cancel or
Mono Start to send the pages scanned so
far.
Cancelling a Broadcast in progress 3
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Remaining Jobs.
Press OK.
The LCD will show the fax number being
dialled and the Broadcast job number.
d Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes i Press 1
No i Press 2
e Press 1 to cancel the fax number being
dialled.
The LCD will then show the Broadcast
job number.
f Press OK.
The LCD will ask you the following
question:
Cancel Job?
Yes i Press 1
No i Press 2
g To cancel the Broadcast, press 1.
h Press Stop/Exit.
Chapter 3
10
Real Time Transmission 3
When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can do
this by turning on Real Time TX.
a Press (FAX).
b Press a or b to choose Real Time TX.
Press OK.
c Press a or b to choose On (or Off).
Press OK.
Note
(MFC-J410 and MFC-J415W only)
If the memory is full and you are sending a
black & white fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to
Off). Faxes from the scanner glass
cannot be sent until you clear some of the
memory.
In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
Overseas Mode 3
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
a Press (FAX).
b Load your document.
c Press a or b to choose
Overseas Mode.
Press OK.
d Press a or b to choose On (or Off).
Press OK.
Sending a fax
11
3
Checking and cancelling
waiting jobs 3
You can check which jobs are still waiting in
the memory to be sent, or cancel a job.
(If there are no jobs, the LCD shows
No Jobs Waiting.)
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Remaining Jobs.
Press OK.
Any waiting jobs appear on the LCD.
d Press a or b to scroll through the jobs
and choose the job you want to cancel.
Press OK.
e Do one of the following:
To cancel, press 1 to choose Yes.
If you want to cancel another job go
to step d.
To exit without cancelling, press 2 to
choose No.
f When you have finished, press
Stop/Exit.
12
4
Additional receiving
operations
4
Printing a reduced incoming
fax 4
If you choose On, the machine automatically
reduces each page of an incoming fax to fit on
one page of A4, Letter or Legal size paper.
The machine calculates the reduction ratio by
using the page size of the fax and your Paper
Size setting. (See Paper Size in chapter 2 in
the Basic Users Guide.)
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Setup Receive.
Press OK.
d Press a or b to choose
Auto Reduction.
Press OK.
e Press a or b to choose On (or Off).
Press OK.
f Press Stop/Exit.
Out of Paper Reception 4
As soon as the paper tray becomes empty
during fax reception, the LCD shows
No Paper Fed. Put some paper in the
paper tray. (See Loading paper and other
print media in chapter 2 in the Basic User’s
Guide.)
The machine will carry on receiving the fax,
with the remaining pages being stored in
memory, if enough memory is available.
Further incoming faxes will also be stored in
memory until the memory is full. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, put fresh paper in the tray.
Receiving a fax 4
13
5
5
Voice operations 5
Voice calls can be made either with an
extension or external telephone, by dialling
manually, or by using Quick Dial numbers.
BT Call Sign (U.K. only) 5
This machine feature lets you use the BT Call
Sign subscriber service which allows you to
have at least two separate telephone
numbers on one telephone line. Each
telephone number has its own distinctive
ringing pattern, so you know which telephone
number is ringing. This is one way you can
have a separate telephone number for your
machine.
Your machine has a BT Call Sign compatible
distinctive ringing function, allowing you to
dedicate a second telephone number (on the
same telephone line) just for receiving faxes.
Note
You can switch BT Call Sign off
temporarily, then turn it back on. When
you get a new fax number, make sure you
reset this function. This machine will
automatically answer incoming calls that
use your new fax number.
When you set the BT Call Sign feature to
On, the receive mode is set to Manual
automatically. Manual mode will not
respond to incoming telephone calls,
since the number you use for telephone
calls will use the normal ring pattern.
To enable the machine to work with BT
Call Sign (with your external
telephone only)
5
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Miscellaneous.
Press OK.
d Press a or b to choose BT Call Sign.
Press OK.
e Press a or b to choose On (or Off).
Press OK.
f Press Stop/Exit.
Note
If you turn off BT Call Sign, the receive
mode stays in Manual. You will need to
set receive mode again. (See Choose the
Receive Mode in chapter 5 in the Basic
User’s Guide.)
Dialling and storing numbers 5
Chapter 5
14
Additional dialling
operations
5
Combining Quick Dial
numbers 5
Sometimes, you may want to choose from
several long distance carriers when you send
a fax. Rates may vary depending on the time
and destination. To take advantage of low
rates, you can store the access codes of long-
distance carriers and credit card numbers as
Speed Dial numbers. You can store these
long dialling sequences by dividing them and
setting them up as separate Speed Dial
numbers in any combination. You can even
include manual dialling using the dial pad.
(See Storing Speed Dial numbers in
chapter 7 in the Basic User’s Guide.)
For example, you might have stored “555“ on
Speed Dial: 03 and “7000“ on Speed Dial: 02.
You can use them both to dial “555-7000” if
you press the following keys:
a Press (Speed Dial).
b Press a or b to choose Search.
Press OK.
c Enter 03.
d Press a or b to choose Speed Dial.
Press OK.
e Press a or b to choose Search.
Press OK.
f Enter 02.
g Press Mono Start or Colour Start.
You will dial “555-7000”.
To temporarily change a number, you can
substitute part of the number with manual
dialling using the dial pad. For example, to
change the number to 555-7001 you could
press (Speed Dial), choose Search,
press 03 and then press 7001 using the dial
pad.
Note
If you must wait for another dial tone or
signal at any point in the dialling
sequence, create a pause in the number
by pressing Redial/Pause. Each key
press adds a 3.5-second delay.
Dialling and storing numbers
15
5
Additional ways to
store numbers
5
Storing Speed Dial numbers
from Outgoing Calls 5
You can also store Speed Dial numbers from
the Outgoing Call history.
a Press Redial/Pause.
You can also choose Outgoing Call
by pressing (FAX).
b Press a or b to choose the name or
number you want to store.
Press OK.
c Press a or b to choose
Add to Speed Dial.
Press OK.
d Press a or b to choose the 2-digit
Speed Dial location where you want to
store the number.
Press OK.
e Do one of the following:
Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text in appendix C in the
Basic User’s Guide.)
To store the number without a name,
press OK.
f Press OK to confirm the fax or
telephone number.
g Press a or b to choose Complete.
Press OK.
h Press Stop/Exit.
Storing Speed Dial numbers
from the Caller ID history 5
If you have the Caller ID subscriber service
from your telephone company you can also
store Speed Dial numbers from incoming
calls in the Caller ID History. (See Caller ID
(U.K. and Ireland only) in chapter 6 in the
Basic User’s Guide.)
a Press Redial/Pause and press l.
You can also choose
Caller ID hist. by pressing
(FAX).
b Press a or b to choose the number you
want to store.
Press OK.
c Press a or b to choose
Add to Speed Dial.
Press OK.
d Press a or b to choose the 2-digit
Speed Dial location where you want to
store the number.
Press OK.
e Do one of the following:
Enter the name (up to 16 characters)
using the dial pad.
Press OK.
(To help you enter letters, see
Entering Text in appendix C in the
Basic User’s Guide.)
To store the number without a name,
press OK.
f Press OK to confirm the fax or
telephone number.
g Press a or b to choose Complete.
Press OK.
h Press Stop/Exit.
Chapter 5
16
Setting up groups for
broadcasting 5
Groups, which can be stored in a Speed Dial
location, allow you to send the same fax
message to many fax numbers by pressing
only (Speed Dial), Search, OK,
the two-digit location and Mono Start.
First, you'll need to store each fax number in
a Speed Dial location. Then you can include
them as numbers in the Group. Each Group
uses up a Speed Dial location. You can have
up to six Groups, or you can assign up to
39 numbers in a large Group.
(See Broadcasting (Monochrome only)
on page 8 and Storing Speed Dial numbers in
chapter 7 in the Basic User’s Guide.)
a Press (Speed Dial).
b Press a or b to choose Setup Groups.
Press OK.
c Press a or b to choose GROUP1,
GROUP2, GROUP3, GROUP4, GROUP5 or
GROUP6 for the Group name where you
will store the fax numbers.
Press OK.
d Press a or b to choose the 2-digit
Speed Dial location where you want to
store the Group.
Press OK.
e Press a or b to choose Add Number.
Press OK.
f To add numbers to the group, press
a or b to choose
Alphabetical Order or
Numerical Order and OK. Press
a or b to select a number and OK.
g Do one of the following:
To add another number to the group,
repeat steps e to f.
If you are finished adding numbers to
the group, press a or b to choose
Complete.
Press OK.
h Do one of the following:
To store another Group for
broadcasting, repeat steps c to g.
To finish storing Groups for
broadcasting, press Stop/Exit.
Note
You can print a list of all the Speed Dial
numbers. Group numbers will be marked
in the GROUP column. (See Reports
on page 19.)
Dialling and storing numbers
17
5
Changing a Group name 5
a Press (Speed Dial).
b Press a or b to choose Setup Groups.
Press OK.
c Press a or b to choose the Group name
you want to change.
Press OK.
d Press a or b to choose
Change Group Name.
Press OK.
Note
How to change the stored name or
number:
If you want to change a character, press
d or c to position the cursor under the
character you want to change, and then
press Clear. Re-enter the character.
e Enter the new name (up to 16
characters) using the dial pad.
Press OK.
(See Entering Text in appendix C in the
Basic Users Guide. For example, type
NEW CLIENTS.)
f Press a or b to choose Complete.
Press OK.
g Press Stop/Exit.
Deleting a Group 5
a Press (Speed Dial).
b Press a or b to choose Setup Groups.
Press OK.
c Press a or b to choose the Group you
want to delete.
Press OK.
d Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
e Press Stop/Exit.
Deleting a number from a Group 5
a Press (Speed Dial).
b Press a or b to choose Setup Groups.
Press OK.
c Press a or b to choose the Group you
want to change.
Press OK.
d Press a or b to choose the number you
want to delete.
Press OK.
Press 1 to confirm.
e Press a or b to choose Complete.
Press OK.
f Press Stop/Exit.
18
6
Fax reports 6
You need to set up the Transmission
Verification Report and Journal Period using
the Menu keys.
Transmission Verification
Report 6
You can use the Transmission Verification
Report as proof that you sent a fax. (For
details about how to set up the type of report
you want, see Transmission Verification
Report in chapter 4 in the Basic User’s
Guide.)
Fax Journal (activity report) 6
You can set the machine to print a journal at
specific intervals (every 50 faxes, 6, 12 or
24 hours, 2 or 7 days). If you set the interval
to Off, you can still print the report by
following the steps in How to print a report
on page 19. The factory setting is
Every 50 Faxes.
a Press Menu.
b Press a or b to choose Fax.
Press OK.
c Press a or b to choose
Report Setting.
Press OK.
d Press a or b to choose
Journal Period.
Press OK.
e Press a or b to choose an interval.
Press OK.
If you choose Every 50 Faxes, go to
step h.
6, 12, 24 hours, 2 or 7 days
The machine will print the report at
the chosen time and then erase all
jobs from its memory. If the
machine's memory is filled with the
maximum 200 jobs before the time
you chose has passed, the machine
will print the Journal early and then
erase all jobs from the memory. If
you want an extra report before it is
due to print, you can print it without
erasing the jobs from the memory.
Every 50 Faxes
The machine will print the Journal
when the machine has stored
50 jobs.
f Enter the time to start printing in 24-hour
format.
Press OK.
(For example: enter 19:45 for 7:45 PM.)
g If you choose Every 7 Days, the LCD
will ask you to choose the first day for
the 7-day countdown.
h Press Stop/Exit.
Printing reports 6
Printing reports
19
6
Reports 6
The following reports are available:
XMIT Verify
Prints a Transmission Verification Report
for your last transmission.
Help List
A help list showing how to program your
machine.
Quick Dial
Lists names and numbers stored in the
Speed Dial memory, in alphabetical or
numerical order.
Fax Journal
Lists information about the last incoming
and outgoing faxes.
(TX: Transmit.) (RX: Receive.)
User Settings
Lists your settings.
Network Config (MFC-J265W and
MFC-J415W only)
Lists your Network settings.
WLAN Report (MFC-J265W and
MFC-J415W only)
Prints a WLAN connection report.
Caller ID hist.
Lists the available Caller ID information
about the last 30 received faxes and
telephone calls.
How to print a report 6
a Press Menu.
b Press a or b to choose
Print Reports.
Press OK.
c Press a or b to choose the report you
want.
Press OK.
d (Quick Dial only) Press a or b to choose
Alphabetical Order or
Numerical Order.
Press OK.
e Press Mono Start.
f Press Stop/Exit.
20
7
Copy settings 7
You can change the copy settings temporarily
for multiple copies.
The machine returns to its default settings
after 1 minute, or if the Mode Timer returns
the machine to Fax mode. (See Mode Timer
on page 3.)
To change a setting, press COPY and then
press a or b to scroll through the copy
settings. When the setting you want is
highlighted, press OK.
When you are finished choosing settings,
press Mono Start or Colour Start.
Note
You can save some of the settings that
you use most often by setting them as
default. These settings will stay until you
change them again. (See Setting your
changes as a new default on page 24.)
Stop copying 7
To stop copying, press Stop/Exit.
Changing copy speed and
quality 7
You can choose from a range of speed and
quality. The factory setting is Normal.
Fast
Fast copy speed and lowest amount of ink
used. Use to save time printing
documents to be proof-read, large
documents or many copies.
Normal
Normal is the recommended mode for
ordinary print outs. This produces good
copy quality with good copy speed.
Best
Use Best mode to copy precise images
such as photographs. This provides the
highest resolution and slowest speed.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Quality.
Press OK.
e Press a or b to choose Fast, Normal or
Best.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Making copies 7
Making copies
21
7
Enlarging or reducing the
copied image 7
You can choose an enlargement or reduction
ratio. If you choose Fit to Page, your
machine will adjust the size automatically to
the paper size you set.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose
Enlarge/Reduce.
Press OK.
e Press a or b to choose 100%, Enlarge,
Reduce, Fit to Page or
Custom(25-400%).
f Do one of the following:
If you chose Enlarge or Reduce,
press OK and press a or b to choose
the enlargement or reduction ratio
you want.
Press OK.
If you chose Custom(25-400%),
press OK and then enter an
enlargement or reduction ratio from
25% to 400%.
Press OK.
If you chose 100% or Fit to Page,
press OK. Go to step g.
g If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
Page Layout is not available with
Enlarge/Reduce.
Page Layout and Sort (MFC-J410 and
MFC-J415W only) are not available with
Fit to Page.
Fit to Page does not work correctly
when the document on the scanner glass
is skewed more than 3 degrees. Using the
document guidelines on the left and top,
place your document in the upper left
hand corner, with the document face down
on the scanner glass.
Fit to Page is not available when
using the ADF.
198% 10x15 cmiA4
186% 10x15 cmiLTR
142% A5 iA4
100%
97% LTR iA4
93% A4 iLTR
(MFC-J220 and MFC-J265W only)
83%
(MFC-J410 and MFC-J415W only)
83% LGL iA4
69% A4 iA5
47% A4 i10x15cm
Fit to Pag e
Custom(25-400%)
Chapter 7
22
Making N in 1 copies or a
poster (Page Layout) 7
The N in 1 copy feature can help you save
paper by letting you copy two or four pages
onto one printed page.
You can also produce a poster. When you
use the poster feature your machine divides
your document into sections, then enlarges
the sections so you can assemble them into a
poster. If you want to print a poster, use the
scanner glass.
IMPORTANT
Make sure paper size is set to A4 or
Letter.
You cannot use the Enlarge/Reduce
and Stack/Sort (MFC-J410 and
MFC-J415W only) settings with the N in 1
and Poster features.
N in 1 colour copies are not available.
(P) means Portrait and (L) means
Landscape.
You can only make one poster copy at a
time.
Note
Sort (MFC-J410 and MFC-J415W only)
and Enlarge/Reduce are not available
with Page Layout.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Page Layout.
Press OK.
e Press a or b to choose Off(1in1),
2in1(P), 2in1(L),
4in1(P), 4in1(L) or
Poster(3x3).
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start to scan the page.
If you placed the document in the ADF
or are making a poster, the machine
scans the document and starts printing.
If you are using the scanner glass, go
to step g.
g After the machine scans the page,
press 1 to scan the next page.
h Place the next page on the scanner
glass.
Press OK.
i Repeat steps g and h for each page of
the layout.
j After all the pages have been scanned,
press 2 to finish.
Note
If you have chosen photo paper as the
Paper Type for N in 1 copies, the machine
will print the images as if plain paper had
been chosen.
Making copies
23
7
Place the document face down in the
direction shown below:
2in1(P)
2in1(L)
4in1(P)
4in1(L)
Poster(3 x 3)
You can make a poster size copy of a
photograph.
Sorting copies using the ADF
(MFC-J410 and MFC-J415W
only) 7
You can sort multiple copies. Pages will be
stacked in the order 321, 321, 321, and so on.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Stack/Sort.
Press OK.
e Press a or b to choose Sort.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Note
Fit to Page and Page Layout are
not available with Sort.
Chapter 7
24
Adjusting Density 7
You can adjust the copy density to make
copies darker or lighter.
a Press (COPY).
b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Density.
Press OK.
e Press d or c to make a lighter or darker
copy.
Press OK.
f If you do not want to change additional
settings, press Mono Start or
Colour Start.
Setting your changes as a
new default 7
You can save the copy settings for Quality,
Enlarge/Reduce, Density and
Page Layout that you use most often by
setting them as the default settings. These
settings will stay until you change them again.
a Press (COPY).
b Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
c After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d Press 1 to choose Yes.
e Press Stop/Exit.
Restoring all settings to the
factory settings 7
You can restore the copy settings Quality,
Enlarge/Reduce, Density , and
Page Layout, that you have changed, to
the factory settings.
a Press (COPY).
b Press a or b to choose
Factory Reset.
Press OK.
c Press 1 to choose Yes.
d Press Stop/Exit.
25
8
8
PhotoCapture Center™
operations
8
Memory cards folder
structures 8
Your machine is designed to be compatible
with modern digital camera image files,
memory cards; however, please read the
points below to avoid errors:
The image file extension must be .JPG
(other image file extensions like .JPEG,
.TIF, .GIF and so on will not be
recognized).
Direct PhotoCapture Center™ printing
must be performed separately from
PhotoCapture Center operations using
the PC. (Simultaneous operation is not
available.)
The machine can read up to 999 files on a
memory card.
The DPOF file on the memory cards must
be in a valid DPOF format. (See DPOF
printing on page 28.)
Please be aware of the following:
When printing an index or image, the
PhotoCapture Center™ will print all the
valid images, even if one or more images
have been corrupted. Corrupted images
will not be printed.
(memory card users)
Your machine is designed to read memory
cards that have been formatted by a digital
camera.
When a digital camera formats a memory
card it creates a special folder into which it
copies image data. If you need to modify
the image data stored on a memory card
with your PC, we recommend that you do
not modify the folder structure created by
the digital camera. When saving new or
modified image files to the memory card
we also recommend you use the same
folder your digital camera uses. If the data
is not saved to the same folder, the
machine may not be able to read the file or
print the image.
Printing photos from a memory
card
8
Chapter 8
26
Print Images 8
Print Index (Thumbnails) 8
The PhotoCapture Center™ assigns
numbers for images (such as No.1, No.2,
No.3, and so on).
The PhotoCapture Center™ uses these
numbers to identify each picture. You can
print a thumbnail page to show all the pictures
on the memory card.
Note
Only file names that are 8 characters or
less will be printed correctly on the index
sheet.
a Make sure you have put the memory
card in the correct slot.
Press (PHOTO CAPTURE).
b Press a or b to choose Print Index.
Press OK.
c Press a or b to choose 6 IMGs/Line
or 5 IMGs/Line.
Press OK.
Print time for 5 IMGs/Line will be
slower than 6 IMGs/Line, but the
quality is better.
d Do one of the following:
Press a or b to choose
Paper Type, and press OK and
press a or b to choose the type of
paper you are using, Plain Paper,
Inkjet Paper, Brother BP71 ,
Brother BP61 or Other Glossy.
Press OK.
Press a or b to choose Paper Size
and press OK and press a or b to
choose the paper size you are using,
A4 or Letter.
Press OK.
If you do not want to change the
paper settings, go to step e.
e Press Colour Start to print.
6 IMGs/Line 5 IMGs/Line
Printing photos from a memory card
27
8
Printing Photos 8
Before you can print an individual image, you
have to know the image number.
a Make sure you have put the memory
card in the correct slot.
Press (PHOTO CAPTURE).
b Print the Index. (See Print Index
(Thumbnails) on page 26.)
c Press a or b to choose Print Photos.
Press OK.
d Enter the image number that you want to
print, from the thumbnails printed on the
Index page.
Press OK.
e Repeat step d until you have entered
the image numbers that you want to
print.
Note
You can enter the numbers at one time by
using the l key for a comma or the # key
for a hyphen. For example, Enter 1, l, 3,
l, 6 to print images No.1, No.3 and No.6.
Enter 1, #, 5 to print images No.1 to No.5.
You can enter up to 12 characters
(including commas) for the image
numbers you want to print.
f After you have chosen the image
numbers, press OK again.
g Enter the number of copies you want
using the dial pad.
h Do one of the following:
Change the print settings. (See
PhotoCapture Centerprint
settings on page 28.)
If you do not want to change any
settings, press Colour Start to print.
Print All Photos 8
You can print all the photos on your memory
card.
a Make sure you have put the memory
card in the correct slot.
Press (PHOTO CAPTURE).
b Press a or b to choose
Print All Photos.
Press OK.
c Enter the number of copies you want
using the dial pad.
d Do one of the following:
Change the print settings. (See
PhotoCapture Centerprint
settings on page 28.)
If you do not want to change any
settings, press Colour Start to print.
Chapter 8
28
DPOF printing 8
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon
Inc., Eastman Kodak Company, FUJIFILM
Corporation, Panasonic Corporation and
Sony Corporation) created this standard to
make it easier to print images from a digital
camera.
If your digital camera supports DPOF
printing, you will be able to choose on the
digital camera display the images and
number of copies you want to print.
When a memory card containing DPOF
information is put into your machine, you can
print the chosen image easily.
a Make sure you have put the memory
card in the correct slot.
Press (PHOTO CAPTURE). The
machine will ask you if you want to use
DPOF settings.
b Press 1 to choose Yes.
c Do one of the following:
Change the print settings. (See
PhotoCapture Center print
settings on page 28.)
If you do not want to change any
settings, press Colour Start to print.
Note
A DPOF File error can occur if the print
order that was created on the camera has
been corrupted. Delete and recreate the
print order using your camera to correct
this problem. For instructions on how to
delete or recreate the print order, refer to
your camera manufacturer's support
website or accompanying documentation.
PhotoCapture Center™
print settings
8
You can change the print settings
temporarily.
The machine returns to its default settings
after 3 minutes, or if the Mode Timer returns
the machine to Fax mode. (See Mode Timer
on page 3.)
Note
You can save the print settings you use
most often by setting them as the default.
(See Setting your changes as a new
default on page 31.)
1 No. of prints
(For View Photo(s))
You can see the total number of photos that will
be printed.
(For Print All Photos, Print Photos)
You can see the number of copies of each
photo that will be printed.
(For DPOF printing) This does not appear.
001
001
001
1
Press Start
Photo
Print Quality
Paper Type
Paper Size
Printing photos from a memory card
29
8
Print Quality 8
a Press a or b to choose
Print Quality.
Press OK.
b Press a or b to choose Normal or
Photo.
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Paper options 8
Paper Type 8
a Press a or b to choose Paper Type.
Press OK.
b Press a or b to choose the paper type
you are using, Plain Paper,
Inkjet Paper, Brother BP71,
Brother BP61 or Other Glossy.
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Paper and print size 8
a Press a or b to choose Paper Size.
Press OK.
b Press a or b to choose the paper size
you are using, 10x15cm, 13x18cm, A4
or Letter.
Press OK.
c If you chose A4 or Letter, press a or b
to choose the Print Size.
Press OK.
d If you do not want to change additional
settings, press Colour Start to print.
Example: Printed Position for A4 paper
1
8 x 10cm
2
9 x 13cm
3
10 x 15cm
4
13 x 18cm
5
15 x 20cm
6
Max. Size
Chapter 8
30
Adjusting Brightness,
Contrast and Colour 8
Brightness 8
a Press a or b to choose Brightness.
Press OK.
b Press d or c to make a darker or lighter
print.
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Contrast 8
You can choose the contrast setting.
Increasing the contrast will make an image
look sharper and more vivid.
a Press a or b to choose Contrast.
Press OK.
b Press d or c to change the contrast.
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Cropping 8
If your photo is too long or wide to fit the
available space on your chosen layout, part
of the image will automatically be cropped.
The factory setting is On. If you want to print
the whole image, turn this setting to Off.
When you set Cropping to Off, also set
Borderless to Off. (See Borderless
printing on page 31.)
a Press a or b to choose Cropping.
Press OK.
b Press a or b to choose Off (or On).
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Cropping: On
8
Cropping: Off 8
Printing photos from a memory card
31
8
Borderless printing 8
This feature expands the printable area to the
edges of the paper. Printing time will be
slightly slower.
a Press a or b to choose Borderless.
Press OK.
b Press a or b to choose Off (or On).
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Date Print 8
You can print the date if it is already in the
data on your photo. The date will be printed
on the lower right corner. If the data doesn’t
have the date information, you cannot use
this function.
a Press a or b to choose Date Print.
Press OK.
b Press a or b to choose On (or Off).
Press OK.
c If you do not want to change additional
settings, press Colour Start to print.
Setting your changes as a
new default 8
You can save the print settings you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
b After changing the last setting, press
a or b to choose Set New Default.
Press OK.
c Press 1 to choose Yes.
d Press Stop/Exit.
Restoring all settings to the
factory settings 8
You can restore the PhotoCapture settings
Print Quality, Paper Type,
Paper Size, Brightness, Contrast,
Cropping, Borderless, and
Date Print, that you have changed, to the
factory settings.
a Press a or b to choose
Factory Reset.
Press OK.
b Press 1 to choose Yes.
c Press Stop/Exit.
Chapter 8
32
Scan to a memory card8
How to set a new default 8
You can save the Scan to Media settings
(Quality and File Type) you use most
often by setting them as the default settings.
These settings will stay until you change
them again.
a Press (SCAN).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Set New Default. Press OK and 1 to
choose Yes.
d Press Stop/Exit.
How to reset to factory
settings 8
You can restore all the Scan to Media settings
(Quality and File Type), that you have
changed, to the factory settings.
a Press (SCAN).
b Press a or b to choose
Scan to Media.
Press OK.
c Press a or b to choose
Factory Reset. Press OK and 1 to
choose Yes.
d Press Stop/Exit.
33
A
A
Cleaning and checking
the machine
A
Cleaning the outside of the
machine A
IMPORTANT
Use neutral detergents. Cleaning with
volatile liquids such as thinner or benzine
will damage the outside surface of the
machine.
DO NOT use cleaning materials that
contain ammonia.
DO NOT use isopropyl alcohol to remove
dirt from the control panel. It may crack the
panel.
Clean the outside of the machine as
follows:
A
a Pull the paper tray (1) completely out of
the machine.
b Wipe the outside of the machine with a
dry, lint-free soft cloth to remove dust.
c Lift the output paper tray cover and
remove anything that is stuck inside the
paper tray.
d Wipe the paper tray with a dry, lint-free
soft cloth to remove dust.
e Close the output paper tray cover and
put the output paper tray firmly back in
the machine.
Routine maintenance A
1
34
Cleaning the machine’s
printer platen A
CAUTION
Be sure to unplug the machine from the
electrical socket before cleaning the printer
platen.
a Lift the scanner cover until it locks
securely in the open position.
b Clean the machine’s printer platen (1)
and the area around it, wiping off any
scattered ink with a dry, soft lint-free
cloth.
Checking the ink volume A
Although an ink volume icon appears on the
LCD, you can use the Menu key to see a
large graph showing the ink that is left in each
cartridge.
a Press Menu.
b Press a or b to choose
Ink Management.
Press OK.
c Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
d Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
®
or
Printing and Faxing for Macintosh in the
Software User’s Guide.)
1
Routine maintenance
35
A
Packing and shipping
the machine
A
When you transport the machine, use the
packing materials that came with your
machine. Follow the instructions below to
correctly pack your machine. Damage
caused to your machine during transit is not
covered by your warranty.
IMPORTANT
It is important to allow the machine to
“park” the print head after a print job.
Listen carefully to the machine before
unplugging it to make sure that all
mechanical noise has stopped. Not
allowing the machine to finish this parking
process may lead to print problems and
possible damage to the print head.
a Open the ink cartridge cover.
b Remove all four ink cartridges. Press
the ink release lever above each
cartridge to release it. (See Replacing
the ink cartridges in appendix A in the
Basic Users Guide.)
c Install the green protective part and then
close the ink cartridge cover.
IMPORTANT
Make sure that the plastic tabs on both
sides of the green protective part (1) have
securely clicked into place (2).
If you are not able to find the green
protective part, DO NOT remove the ink
cartridges before shipping. It is essential
that the machine be shipped with either
the green protective part or the ink
cartridges in position. Shipping without
them will cause damage to your machine
and may void your warranty.
1
2
36
d Lift the machine from the front and hook
the tab of the green protective part into
the keyed opening (1) on the bottom of
the paper tray. Then latch the protective
part over the raised portion of the paper
tray (2).
e Unplug the machine from the telephone
wall socket and take the telephone line
cord out of the machine.
f Unplug the machine from the electrical
socket.
g Using both hands, use the plastic tabs
on both sides of the machine to lift the
scanner cover until it locks securely into
the open position. Then unplug the
interface cable from the machine, if it is
connected.
h Lift the scanner cover ( ) to release the
lock. Gently push the scanner cover
support down ( ) and close the
scanner cover ( ) using both hands.
i Wrap the machine in the bag.
1
2
1
2
3
Routine maintenance
37
A
j Pack the machine and the printed
materials in the original carton with the
original packing material as shown
below. Do not pack the used ink
cartridges in the carton.
k Close the carton and tape it shut.
38
B
This is a comprehensive list of features and terms that appear in Brother manuals. Availability of
these features depends on the model you purchased.
Glossary B
ADF (automatic document feeder)
The document can be placed in the ADF
and scanned one page at a time
automatically.
Auto Reduction
Reduces the size of incoming faxes.
Automatic fax transmission
Sending a fax without picking up the
handset of an external telephone.
Automatic Redial
A feature that enables your machine to
redial the last fax number after five
minutes if the fax did not go through
because the line was busy.
Beeper Volume
Volume setting for the beep when you
press a key or make an error.
Brightness
Changing the Brightness makes the whole
image lighter or darker.
Broadcasting
The ability to send the same fax message
to more than one location.
Caller ID
A service purchased from the telephone
company that lets you see the number (or
name) of the party calling you.
CNG tones
The special tones (beeps) sent by fax
machines during automatic transmission
to tell the receiving machine that a fax
machine is calling.
Coding method
Method of coding the information
contained in the document. All fax
machines must use a minimum standard
of Modified Huffman (MH). Your machine
is capable of greater compression
methods, Modified Read (MR), Modified
Modified Read (MMR) and JPEG, if the
receiving machine has the same
capability.
Communication error (Comm. Error)
An error during fax sending or receiving,
usually caused by line noise or static.
Compatibility group
The ability of one fax unit to communicate
with another. Compatibility is assured
between ITU-T Groups.
Contrast
Setting to compensate for dark or light
documents, by making faxes or copies of
dark documents lighter and light
documents darker.
Density
Changing the Density makes the whole
image lighter or darker.
Dual Access
Your machine can scan outgoing faxes or
scheduled jobs into memory at the same
time it is sending a fax from memory or
receiving or printing an incoming fax.
ECM (Error Correction Mode)
Detects errors during fax transmission
and resends the pages of the fax that had
an error.
Extension telephone
A telephone using the same line as your
fax but plugged into a separate wall
socket.
Glossary
39
B
External telephone
A TAD (telephone answering device) or
telephone that is connected to your
machine.
F/T Ring Time
The length of time that the Brother
machine rings (when the Receive Mode
setting is Fax/Tel) to notify you to pick up
a voice call that it answered.
Fax Detect
Enables your machine to respond to CNG
tones if you interrupt a fax call by
answering it.
Fax Journal
Lists information about the last 200
incoming and outgoing faxes. TX means
Transmit. RX means Receive.
Fax tones
The signals sent by sending and receiving
fax machines while communicating
information.
Fax/Tel
You can receive faxes and telephone
calls. Do not use this mode if you are
using a telephone answering device
(TAD).
Fine resolution
Resolution is 203 196 dpi. It is used for
small print and graphs.
Greyscale
The shades of grey available for copying,
scanning and faxing photographs.
Group number
A combination of Speed Dial numbers that
are stored in a Speed Dial location for
Broadcasting.
Help list
A printout of the complete Menu table that
you can use to program your machine
when you do not have the Basic User's
Guide with you.
Innobella
Innobella™ is a range of genuine
consumables offered by Brother. For best
quality results Brother recommends
Innobella™ Ink and Paper.
Journal Period
The pre-programmed time period
between automatically printed Fax
Journal Reports. You can print the Fax
Journal on demand without interrupting
the cycle.
LCD (Liquid Crystal Display)
The display screen on the machine that
shows interactive messages during On-
Screen Programming and shows the date
and time when the machine is idle.
Manual fax
When you lift the handset of your external
telephone you can hear the receiving fax
machine answer before you press
Mono Start or Colour Start to begin
sending the fax.
Menu mode
Programming mode for changing your
machine's settings.
OCR (optical character recognition)
ScanSoft™ PaperPort™11SE with OCR
or Presto! PageManager software
application converts an image of text to
text you can edit.
Overseas Mode
Makes temporary changes to the fax
tones to accommodate noise and static on
overseas telephone lines.
Pause
Allows you to place a 3.5 second delay in
the dialling sequence while you are
dialling using the dial pad or while you are
storing Speed Dial numbers. Press
Redial/Pause as many times as needed
for longer pauses.
PhotoCapture Center™
Allows you to print digital photos from your
digital camera at high resolution for photo
quality printing.
40
Photo resolution (Mono only)
A resolution setting that uses varying
shades of grey for the best representation
of photographs.
Pulse
A form of rotary dialling on a telephone
line.
Quick Dial List
A listing of names and numbers stored in
Speed Dial memory, in numerical order.
Real Time Transmission
When memory is full, you can send faxes
in real time.
Remaining jobs
You can check which jobs are waiting in
memory and cancel jobs individually.
Remote Activation Code
Press this code (l 51) when you answer
a fax call on an extension or external
telephone.
Remote Deactivation Code
(For Fax/Tel mode only)
When the machine answers a voice call, it
pseudo/double-rings. You can pick up at
an extension telephone by pressing this
code (#51).
Resolution
The number of vertical and horizontal lines
per inch. See: Standard, Fine, Super Fine
and Photo.
Ring Delay
The number of rings before the machine
answers in Fax Only and Fax/Tel
modes.
Ring Volume
Volume setting for the machine's ring.
Scanning
The process of sending an electronic
image of a paper document into your
computer.
Scan to Media
You can scan a monochrome or colour
document into a memory card.
Monochrome images will be in TIFF or
PDF file format and colour images may be
in PDF or JPEG file format.
Search
An electronic, numerical or alphabetical
listing of stored Speed Dial and Group
numbers.
Speed Dial
A pre-programmed number for easy
dialling. You must press (Speed Dial),
OK, the two digit code, and Mono Start or
Colour Start to start the dialling process.
Standard resolution
203 97 dpi. It is used for regular size text
and quickest transmission.
Station ID
The stored information that appears on
the top of faxed pages. It includes the
sender's name and fax number.
Super Fine resolution (Mono only)
392 203 dpi. Best for very small print
and line art.
TAD (telephone answering device)
You can connect an external TAD to your
machine.
Temporary settings
You can choose certain options for each
fax transmission and copy without
changing the default settings.
Tone
A form of dialling on the telephone line
used for touch-tone telephones.
Transmission
The process of sending faxes over the
phone lines from your machine to the
receiving fax machine.
User Settings
A printed report that shows the current
settings of the machine.
Glossary
41
B
WLAN Report
A printed report that shows the result of
the WLAN Connection.
Xmit Report (Transmission Verification
Report)
A listing for each fax sent, that shows its
date, time and number.
Index
42
C
A
Access codes, storing and dialling ...........14
Apple Macintosh
See Software User's Guide.
B
Broadcasting ..............................................8
setting up Groups for
............................16
C
Caller ID
Caller ID History report
.........................19
Cancelling
jobs awaiting redial
...............................11
Cleaning
printer platen
.........................................34
ControlCenter
See Software User's Guide.
Copy
density
...................................................24
enlarge/reduce
......................................21
page layout (N in 1)
...............................22
quality
....................................................20
return to factory settings
.......................24
set new default
......................................24
sort (ADF only)
......................................23
using ADF
.............................................23
D
Dialling
Groups
....................................................8
Dual Access
...............................................8
F
Fax, from PC
See Software User's Guide.
Fax, stand-alone
receiving
into the memory
.................................12
out of paper reception
........................12
reducing to fit on paper
......................12
sending
................................................... 6
Broadcasting
....................................... 8
cancelling from memory
.................... 11
contrast
............................................... 6
from memory (Dual Access)
................ 8
manual
................................................ 8
overseas
............................................ 10
Real Time Transmission
.................... 10
Resolution
........................................... 7
return to factory setting
....................... 7
set new default
.................................... 7
G
Groups for Broadcasting ......................... 16
I
Ink cartridges
checking ink volume
............................. 34
L
LCD (Liquid Crystal Display)
Contrast
.................................................. 2
Dim Timer
............................................... 3
Help List
............................................... 19
M
Macintosh
See Software User's Guide.
Manual
transmission
........................................... 8
Memory Storage
........................................ 1
Mode, entering
Timer
...................................................... 3
N
Network
Printing
See Network User's Guide.
Scanning
See Software User's Guide.
43
C
P
Packing and shipping the machine ..........35
PaperPort™11SE with OCR
See Software User's Guide. See also Help
in the PaperPort™11SE application.
PhotoCapture Center™
Borderless
.............................................31
Cropping
...............................................30
DPOF printing
.......................................28
from PC
See Software User's Guide.
Print settings
Brightness
..........................................30
Contrast
.............................................30
Date Print
...........................................31
Paper type & size
...............................29
Quality
......................................... 28, 29
Return to factory setting
.....................31
Set new default
..................................31
Printing
all photos
...........................................27
index
..................................................26
photos
................................................27
Scan to Media
memory card
......................................32
Power failure
..............................................1
Presto! PageManager
See Software User's Guide. See also Help
in the Presto! PageManager application.
Print
report
....................................................19
Printing
See Software User's Guide.
Q
Quick Dial
Broadcasting
...........................................8
using Groups
.......................................8
Group dial
changing
............................................17
setting up Groups for Broadcasting
...16
Speed Dial
setting up from Caller ID history
........15
setting up from outgoing calls
............15
R
Reducing
copies
................................................... 21
incoming faxes
..................................... 12
Remote Setup
See Software User's Guide.
Reports
.................................................... 18
Caller ID
............................................... 19
Caller ID History Report
....................... 19
Fax Journal
.......................................... 19
Journal Period
................................... 18
Help List
............................................... 19
how to print
........................................... 19
Network Configuration
.......................... 19
Quick Dial List
...................................... 19
Transmission Verification
............... 18, 19
User Settings
........................................ 19
Resolution
setting for next fax
.................................. 7
S
Scanning
See Software User's Guide.
Shipping the machine
.............................. 35
Sleep Mode
............................................... 2
Speed Dial
storing
.................................................. 15
T
Troubleshooting
checking ink volume
............................. 34
TX Lock
turning on/off
.......................................... 5
W
Windows
®
See Software User's Guide.
Wireless Network
See Quick Setup Guide and Network
User's Guide.
Visit us on the World Wide Web
http://www.brother.com
This machine is approved for use in the country of purchase only. Local Brother companies or their
dealers will only support machines purchased in their own countries.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother MFC-J265W bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother MFC-J265W in de taal/talen: Engels als bijlage per email.

De handleiding is 1,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Brother MFC-J265W

Brother MFC-J265W Gebruiksaanwijzing - Nederlands - 119 pagina's

Brother MFC-J265W Installatiehandleiding - Nederlands - 31 pagina's

Brother MFC-J265W Gebruiksaanwijzing - Nederlands - 50 pagina's

Brother MFC-J265W Gebruiksaanwijzing - Deutsch - 115 pagina's

Brother MFC-J265W Installatiehandleiding - Deutsch - 31 pagina's

Brother MFC-J265W Gebruiksaanwijzing - Deutsch - 50 pagina's

Brother MFC-J265W Gebruiksaanwijzing - English - 115 pagina's

Brother MFC-J265W Installatiehandleiding - English - 31 pagina's

Brother MFC-J265W Gebruiksaanwijzing - Français - 50 pagina's

Brother MFC-J265W Gebruiksaanwijzing - Français - 115 pagina's

Brother MFC-J265W Installatiehandleiding - Français - 31 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info