681756

Brother MFC-9332CDW Handleiding

1
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
1
Start Here
MFC-9140CDN / MFC-9330CDW
MFC-9340CDW
Quick Setup Guide
UK/IRE Version 0
Please read the Product Safety Guide first, then read this Quick Setup Guide for the correct setup and installation
procedure. To view the Quick Setup Guide in other languages, please visit http://solutions.brother.com/
.
1
Unpack the machine and check the components
NOTE
Not all models are available in all countries.
Drum Unit and Toner Cartridge Assemblies
(pre-installed)
(Black, Cyan, Magenta and Yellow)
Waste Toner Box
(pre-installed)
CD-ROM AC Power Cord Telephone Line Cord
Belt Unit
(pre-installed)
Product Safety Guide Basic User's Guide Quick Setup Guide
(For U.K.) (For Others)
2
WARNING
• Plastic bags are used in the packing of your machine. To avoid danger of suffocation, keep these
plastic bags away from babies and children. Plastic bags are not toys.
• This machine is heavy and weighs more than 20.0 kg. To prevent possible injuries, at least two people
should lift the machine. One person should hold the front of the machine, and one person should hold
the back, as shown in the illustration below. Be careful not to trap your fingers when you put the
machine down.
WARNING
WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injuries.
CAUTION
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injuries.
NOTE
• Keep a minimum gap around the machine as shown in the illustration.
• The components included in the box may differ depending on your country.
• We recommend that you save the original packaging.
• If for any reason you must ship your machine, carefully repack the machine in the original packaging to avoid
any damage during transit. The machine should be adequately insured with the carrier. For details on how
to repack the machine: uu Advanced User's Guide: Packing and shipping the machine.
• Illustrations in this Quick Setup Guide are based on the MFC-9340CDW.
• The interface cable is not a standard accessory. Buy the appropriate interface cable for the connection you
want to use (USB or Network).
USB cable
• We recommend using a USB 2.0 cable (Type A/B) that is no longer than 2 metres.
• DO NOT connect the interface cable at this time. Connecting the interface cable is done during the MFL-Pro
Suite installation process.
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet
Network.
150 mm
400 mm
150 mm
150 mm
3
2
Remove the packing
material from the
machine
CAUTION
CAUTION
DO NOT eat the silica gel pack, please throw it
away. If ingested, seek medical attention
immediately.
a Remove the packing tape from the outside of
the machine, the silica gel pack on the support
flap and the film covering the scanner glass.
b Fully open the top cover by lifting the handle up
a.
c Slide all eight yellow drum locks in the direction
of the arrows (the locks may require a firm
push).
d Take out all four drum and toner cartridge
assemblies.
e Remove the orange packing piece from the belt
unit.
IMPORTANT
DO NOT connect the AC power cord yet.
IMPORTANT
To avoid print quality problems, DO NOT touch
the shaded part shown in the illustration.
4
f Remove the orange packing piece from each
drum and toner cartridge assembly.
g Using both hands, hold each drum and toner
cartridge assembly level, and gently shake it
from side to side several times to distribute the
toner evenly inside the assembly.
h Slide all four drum and toner cartridge
assemblies into the machine. Make sure the
toner cartridge colour matches the same colour
label on the machine.
i Close the top cover of the machine.
3
Load paper in the paper
tray
a Pull the paper tray completely out of the
machine.
b While pressing the green paper-guide release
lever a, slide the paper guides to fit the paper
size you are loading in the tray. Make sure the
guides are firmly in the slots.
c Fan the stack of paper well to avoid paper jams
and misfeeds.
BK - Black
M - Magenta
C - Cyan
Y - Yellow
BK
C
M
Y
5
d Load paper in the tray and make sure:
The paper is below the maximum paper
mark (bbb) a. Overfilling the paper tray will
cause paper jams.
The side to be printed on is face down.
The paper guides touch the sides of the
paper so it will feed correctly.
e Put the paper tray firmly back in the machine.
Make sure it is completely inserted into the
machine.
f Lift the support flap a to prevent paper from
sliding off the face-down output tray.
4
Connect the power cord
and telephone line
a Connect the AC power cord to the machine and
then plug it into an electrical socket.
b Press on the control panel.
c Connect the telephone line cord: connect one
end of the telephone line cord to the socket on
the machine marked LINE and the other end to
a telephone wall socket.
For information about recommended paper:
uu Basic User's Guide: Recommended
paper and print media.
IMPORTANT
DO NOT connect the interface cable
yet.
IMPORTANT
DO NOT touch the Touchscreen immediately
after plugging in the power cord or turning the
machine on. Doing this may cause an error.
IMPORTANT
The telephone line cord MUST be connected to
the socket on the machine marked LINE.
(Example for U.K.)
6
WARNING
The machine must be grounded using an
earthed plug.
Since the machine is grounded through the
electrical socket, you can protect yourself
from potentially hazardous electrical
conditions on the telephone network by
keeping the power cord connected to your
machine when you connect it to a telephone
line. Similarly, you can protect yourself when
you want to move your machine by
disconnecting the telephone line first and then
disconnecting the power cord.
5
Choose a Receive Mode
There are four possible receive modes: Fax,
Fax/Tel, Manual and External TAD.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Fax.
Press Fax.
d Swipe up or down, or press a or b to display
Setup Receive.
Press Setup Receive.
e Swipe up or down, or press a or b to display
Receive Mode.
Press Receive Mode.
NOTE
If you are sharing one telephone line with an
external telephone, connect it as shown below.
a Extension telephone
b External telephone
NOTE
If you are sharing one telephone line with an
external telephone answering machine, connect it
as shown below.
a Extension telephone answering machine
(not supported)
b External telephone answering machine
Set the receive mode to External TAD if
you have an external answering machine
(see Choose a Receive Mode uu page 6).
For additional details: uu Basic User's
Guide: Connecting an external TAD.
(Example for U.K.)
(Example for U.K.)
Do you want to use the telephone features of your
machine (if available) or an external telephone or
external telephone answering device connected on the
same line as the machine?
Your machine
automatically answers
every call as a fax.
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the phone will
ring for you to pick up
the call.
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored
on the external TAD.
Fax messages are
automatically printed.
You control the phone
line and must answer
every call yourself.
Do you want the machine to
answer fax and telephone calls
automatically?
Manual
Fax
Fax/Tel
External TAD
No
Yes
Yes
No
No
Yes
Are you using the voice message
function of an external telephone
answering device?
7
f Press your preferred receive mode.
g Press .
6
Set the date and time
The Touchscreen displays the date and time. You can
also add the current date and time to each fax you
send by setting your Station ID (see step 7).
a Press .
b Press
(Date & Time).
c Press Date.
d Enter the last two digits of the year using the
numbers on the Touchscreen, and then press
OK.
(e.g., Enter 1, 3 for 2013.)
e Enter the two digits for the month using the
numbers on the Touchscreen, and then press
OK.
f Enter the two digits for the day using the
numbers on the Touchscreen, and then press
OK.
g Press Time.
h Enter the time in 24-hour format using the
numbers on the Touchscreen, and then press
OK.
i Press .
7
Enter personal
information (Station ID)
Set the machine's Station ID if you want the date and
time to appear on each fax you send.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d Swipe up or down, or press a or b to display
Station ID.
Press Station ID.
e Press Fax.
f Enter your fax number (up to 20 digits) using
the numbers on the Touchscreen, and then
press OK.
g Press Tel.
h Enter your telephone number (up to 20 digits)
using the numbers on the Touchscreen, and
then press OK. If your telephone number and
fax number are the same, enter the same
number again.
i Press Name.
j Use the Touchscreen to enter your name (up to
20 characters), and then press OK.
k Press .
For more details: uu Basic User's Guide:
Receiving a fax.
NOTE
• To enter numbers or special characters, press
repeatedly until the character you want to
enter appears, then press the character you
want.
• If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, then press .
• To enter a space, press Space.
• For more details, see Entering Text uu
page 33.
8
8
Fax Transmission Report
Your Brother machine is equipped with a
Transmission Verification Report that can be used as
confirmation that you sent a fax. This report lists the
name or fax number of the receiving party, the date,
time and duration of the transmission, the number of
pages transmitted, and whether or not the
transmission was successful. If you want to use the
Fax Transmission Report feature: uu Advanced
User's Guide: Printing reports.
9
Set tone or pulse dialling
mode
Your machine comes set for a Tone dialling service. If
you have a Pulse dialling (rotary) service, you need to
change the dialling mode.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d Swipe up or down, or press a or b to display
Tone/Pulse.
Press Tone/Pulse.
e Press Pulse (or Tone).
f Press .
10
Set the telephone line
compatibility
If you are connecting the machine to a VoIP service
(over the Internet) you need to change the
compatibility setting.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d Swipe up or down, or press a or b to display
Compatibility.
Press Compatibility.
e Press Basic(for VoIP).
f Press .
NOTE
If you are using an analogue telephone line, skip
this step.
9
11
Set the telephone line
type
If you are connecting the machine to a line that
features a PABX (PBX) or ISDN to send and receive
faxes, it is also necessary to change the phone line
type accordingly by completing the following steps.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Initial Setup.
Press Initial Setup.
d Swipe up or down, or press a or b to display
Phone Line Set.
Press Phone Line Set.
e Press Normal, ISDN or PBX.
Do one of the following:
If you choose ISDN or Normal, go to step i.
If you choose PBX, go to step f.
f Do one of the following:
If you want to change the current prefix
number, press On or Always and go to
step g.
If you do not want to change the current
prefix number, go to step i.
g Press Dial Prefix.
h Enter the prefix number (up to five digits) using
the buttons on the Touchscreen, and then
press OK.
i Press .
12
Automatic Daylight
Saving Time
You can set the machine to change automatically for
Daylight Saving Time. It will reset itself forward one
hour in the spring and backward one hour in the
autumn.
a Press .
b Press
(Date & Time).
c Press Auto Daylight.
d Press On (or Off).
e Press .
NOTE
• The default prefix setting is “!”.
• If you choose On, pressing R will let you access
an outside line.
• If you choose Always, you can access an
outside line without pressing R.
NOTE
• You can use the numbers 0 to 9, and the
characters #, l and !.
• You cannot use ! with any other numbers or
characters.
• If your telephone system requires a timed break
recall, press ! on the Touchscreen.
NOTE
PBX and TRANSFER
The machine is initially set to Normal, which lets
the machine connect to a standard PSTN (Public
Switched Telephone Network) line. However,
many offices use a central telephone system or
Private Automatic Branch Exchange (PABX).
Your machine can be connected to most types of
PABX (PBX). The machine’s recall feature
supports timed break recall only (TBR). TBR will
work with most PABX (PBX) systems allowing
you to gain access to an outside line, or transfer
calls to another extension. The feature works
when R is pressed.
10
13
Set the Time Zone
You can set the time zone on the machine for your
location.
a Press .
b Press
(Date & Time).
c Press Time Zone.
d Enter your time zone.
Press OK.
e Press .
11
Windows
®
USB
Macintosh
Windows
®
Macintosh
Wired Network
Wireless Network
Windows
®
Macintosh
14
Choose your connection type
These installation instructions are for Windows
®
XP Home/Windows
®
XP Professional, Windows
®
XP
Professional x64 Edition, Windows Vista
®
, Windows
®
7, Windows
®
8, and Mac OS X v10.6.8, 10.7.x and 10.8.x.
NOTE
• For Windows Server
®
2003/2003 x64 Edition/2008/2008 R2/2012 and Linux
®
, visit your model page at
http://solutions.brother.com/
.
• You can visit us at http://solutions.brother.com/
where you can get product support, the latest driver updates
and utilities, and answers to frequently asked questions (FAQs).
For USB Interface Cables
Windows
®
, go to page 12
Macintosh, go to page 14
For Wired Network
Windows
®
, go to page 16
Macintosh, go to page 19
For Wireless Network
Windows
®
and Macintosh,
go to page 21
NOTE
To connect your iOS device, Android™ device, or Windows
®
Phone to your Brother machine using Wi-Fi Direct™,
please download the Wi-Fi Direct™ Guide at http://solutions.brother.com/
.
12
Windows
®
USB
For Windows
®
USB Interface Users
(Windows
®
XP/XP Professional x64 Edition/Windows Vista
®
/
Windows
®
7/Windows
®
8)
15
Before you install
a Make sure your computer is ON and you are
logged on with Administrator rights.
b Press and hold down to turn off the
machine, and make sure the USB interface
cable is NOT connected. If you have already
connected the cable, disconnect it.
16
Install MFL-Pro Suite
a Put the CD-ROM into your CD-ROM drive. If
the model name screen appears, choose your
machine. If the language screen appears,
choose your language.
b Click Install MFL-Pro Suite, and click Yes in
the next two windows if you accept the license
agreements.
c Choose Local Connection (USB), and then
click Next.
IMPORTANT
• If there are any programs running, close them.
• The screens may differ depending on your
operating system.
NOTE
The CD-ROM includes Nuance™ PaperPort™
12SE. This software supports Windows
®
XP
(SP3 or greater), XP Professional x64 Edition
(SP2 or greater), Windows Vista
®
(SP2 or
greater), Windows
®
7 and Windows
®
8. Update
to the latest Windows
®
Service Pack before
installing MFL-Pro Suite.
NOTE
• If the Brother screen does not appear
automatically, go to Computer (My
Computer).
(For Windows
®
8: click the (File Explorer)
icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then
double-click start.exe.
• If the User Account Control screen appears,
click Continue or Yes.
NOTE
If the installation does not continue automatically,
restart the installation by ejecting and then
reinserting the CD-ROM or by double-clicking the
start.exe program from the root folder. Continue
from step b to install MFL-Pro Suite.
NOTE
To install the PS driver (BR-Script3 printer driver),
choose Custom Install, and then follow the
on-screen instructions.
13
Windows
®
USB
Windows
®
USB
Macintosh
d Follow the on-screen instructions until the Plug
in the USB cable screen appears.
e Connect the USB cable to the USB port
marked with the symbol on your machine,
and then connect the cable to your computer.
f Press to turn on the machine.
The installation will automatically continue. The
installation screens appear one after another. If
prompted, follow any on-screen instructions.
g When the On-Line Registration screen
appears, make your selection and follow the
on-screen instructions. Once you have
completed the registration process, click Next.
h When the Setup is Complete screen appears,
make your selection, and then click Next.
17
Finish and restart
a Click Finish to restart your computer. After
restarting the computer, you must log on with
Administrator rights.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few minutes for all
screens to appear.
NOTE
If the Windows Security screen appears, select
the check box and click Install to complete the
installation correctly.
NOTE
• If an error message appears during the
software installation, do one of the following:
- For Windows
®
XP, Windows Vista
®
and
Windows
®
7 users: run the Installation
Diagnostics located in (Start) >
All Programs > Brother > MFC-XXXX
(where MFC-XXXX is your model name).
- For Windows
®
8 users: to run Installation
Diagnostics, double-click the (Brother
Utilities) icon on the desktop, and then click
the drop-down list and select your model
name (if not already selected). Click Tools in
the left navigation bar.
• Depending on your security settings when using
the machine or its software, a Windows
®
Security or antivirus software window may
appear. Please allow or permit the window to
continue.
Finish
The installation is now
complete.
NOTE
• For Windows
®
8 users: if the Brother manuals
included on the CD-ROM are in PDF format,
use Adobe
®
Reader
®
to open them. If Adobe
®
Reader
®
is installed on your computer but
cannot open the files in Adobe
®
Reader
®
,
change the file association for PDF (see How to
open a PDF file in Adobe
®
Reader
®
(Windows
®
8) uu page 40).
• XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver is
the most suitable driver for Windows Vista
®
,
Windows
®
7 and Windows
®
8 when printing
from applications that use the XML Paper
Specification. Please download the latest driver
from the Brother Solutions Center at
http://solutions.brother.com/
.
14
Macintosh
USB
For Macintosh USB Interface Users
(Mac OS X v10.6.8, 10.7.x, 10.8.x)
15
Before you install
a Make sure your machine is connected to an AC
power source and your Macintosh is ON. You
must be logged on with Administrator rights.
b Connect the USB cable to the USB port
marked with the symbol on your machine,
and then connect the cable to your Macintosh.
c Make sure your machine is turned on.
16
Install MFL-Pro Suite
a Put the CD-ROM into your CD-ROM drive, and
then double-click the BROTHER icon on your
desktop.
b Double-click the Start Here OSX icon. If
prompted, select your model.
c (MFC-9330CDW / MFC-9340CDW)
Choose Local Connection (USB), and then
click Next.
d The installation screens appear one after
another. If prompted, follow any on-screen
instructions.
e Choose your machine from the list, and then
click Next.
f When the Add Printer screen appears, click
Add Printer.
g Choose your machine from the list, click Add,
and then click Next.
IMPORTANT
For Mac OS X v10.6.7 or lower users: upgrade to
Mac OS X v10.6.8, 10.7.x, 10.8.x. (For the latest
drivers and information for the Mac OS X you are
using, visit http://solutions.brother.com/
.)
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few minutes for the
installation to complete.
NOTE
To add the PS driver (BR-Script3 printer driver),
select it from the Print Using (Use) pop-up menu.
The installation of MFL-Pro Suite is now
complete.
Go to step 17 on page 15.
15
Macintosh
USB
Windows
®
USB
Macintosh
17
Download and install
Presto! PageManager
When Presto! PageManager is installed, OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto! PageManager.
a On the Brother Support screen, click
Presto! PageManager and follow the
on-screen instructions.
Finish
The installation is now
complete.
16
Windows
®
Wired Network
For Windows
®
Wired Network Interface Users
(Windows
®
XP/XP Professional x64 Edition/Windows Vista
®
/
Windows
®
7/Windows
®
8)
15
Before you install
a Make sure your computer is ON and you are
logged on with Administrator rights.
b Remove the protective cap from the Ethernet
port marked with a symbol on your
machine.
c Connect the network interface cable to the
Ethernet port on your machine, and then
connect it to a free port on your hub.
d Make sure your machine is turned on.
16
Install MFL-Pro Suite
a Put the CD-ROM into your CD-ROM drive. If
the model name screen appears, choose your
machine. If the language screen appears,
choose your language.
b Click Install MFL-Pro Suite, and click Yes in
the next two windows if you accept the license
agreements.
IMPORTANT
• If there are any programs running, close them.
• The screens may differ depending on your
operating system.
NOTE
• The CD-ROM includes Nuance™ PaperPort™
12SE. This software supports Windows
®
XP
(SP3 or greater), XP Professional x64 Edition
(SP2 or greater), Windows Vista
®
(SP2 or
greater), Windows
®
7 and Windows
®
8. Update
to the latest Windows
®
Service Pack before
installing MFL-Pro Suite.
• Disable all personal firewall software (other
than Windows
®
Firewall), anti-spyware, or
antivirus applications for the duration of the
installation.
NOTE
• If the Brother screen does not appear
automatically, go to Computer (My
Computer).
(For Windows
®
8: click the (File Explorer)
icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then
double-click start.exe.
• If the User Account Control screen appears,
click Continue or Yes.
NOTE
If the installation does not continue automatically,
restart the installation by ejecting and then
reinserting the CD-ROM or by double-clicking the
start.exe program from the root folder. Continue
from step b to install MFL-Pro Suite.
17
Windows
®
Wired Network
Windows
®
Macintosh
Wired Network
c Choose Wired Network Connection
(Ethernet), and then click Next.
d When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended) and click Next.
If you are not using the Windows
®
Firewall, see
the user’s guide for your software for
information on how to add the following
network ports:
For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP port
54926.
If you still have trouble with your network
connection, add UDP ports 161 and 137.
e The installation will automatically continue. The
installation screens appear one after another. If
prompted, follow any on-screen instructions.
f When the On-Line Registration screen
appears, make your selection and follow the
on-screen instructions. Once you have
completed the registration process, click Next.
g When the Setup is Complete screen appears,
make your selection, and then click Next.
17
Finish and restart
a Click Finish to restart your computer. After
restarting the computer, you must log on with
Administrator rights.
NOTE
To install the PS driver (BR-Script3 printer driver),
choose Custom Install, and then follow the
on-screen instructions.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few minutes for all
screens to appear.
NOTE
• If prompted, choose your machine from the list,
and then click Next.
• If your machine is not found over the network,
confirm your settings by following the on-screen
instructions.
• If there is more than one of the same model
connected on your network, the IP Address and
Node Name will be displayed to help you
identify the machine.
• You can find your machine’s IP address and the
Node Name by printing out the Network
Configuration Report (see Print the Network
Configuration Report uu page 39).
• If the Windows Security screen appears,
select the check box and click Install to
complete the installation correctly.
NOTE
• If an error message appears during the
software installation, do one of the following:
- For Windows
®
XP, Windows Vista
®
and
Windows
®
7 users: run the Installation
Diagnostics located in (Start) >
All Programs > Brother > MFC-XXXX LAN
(where MFC-XXXX is your model name).
- For Windows
®
8 users: to run Installation
Diagnostics, double-click the (Brother
Utilities) icon on the desktop, and then click
the drop-down list and select your model
name (if not already selected). Click Tools in
the left navigation bar.
• Depending on your security settings when using
the machine or its software, a Windows
®
Security or antivirus software window may
appear. Please allow or permit the window to
continue.
18
Windows
®
Wired Network
18
Install MFL-Pro Suite on
additional computers
(if needed)
If you want to use your machine with multiple
computers on the network, install MFL-Pro Suite on
each computer. Go to step 15 on page 16.
NOTE
Network license (Windows
®
)
This product includes a PC license for up to
five users. This license supports the installation of
the MFL-Pro Suite including Nuance™
PaperPort™ 12SE on up to five PCs on the
network. If you want to use more than five PCs
with Nuance™ PaperPort™ 12SE installed,
please purchase the Brother NL-5 pack which is a
multiple PC license agreement pack for up to
five additional users. To purchase the NL-5 pack,
contact your authorized Brother dealer or contact
Brother customer service.
Finish
The installation is now
complete.
NOTE
• For Windows
®
8 users: if the Brother manuals
included on the CD-ROM are in PDF format,
use Adobe
®
Reader
®
to open them. If Adobe
®
Reader
®
is installed on your computer but
cannot open the files in Adobe
®
Reader
®
,
change the file association for PDF (see How to
open a PDF file in Adobe
®
Reader
®
(Windows
®
8) uu page 40).
• XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver is
the most suitable driver for Windows Vista
®
,
Windows
®
7 and Windows
®
8 when printing
from applications that use the XML Paper
Specification. Please download the latest driver
from the Brother Solutions Center at
http://solutions.brother.com/
.
19
Macintosh
Wired Network
Windows
®
Macintosh
Wired Network
For Macintosh Wired Network Interface Users
(Mac OS X v10.6.8, 10.7.x, 10.8.x)
15
Before you install
a Make sure your machine is connected to an AC
power source and your Macintosh is ON. You
must be logged on with Administrator rights.
b Remove the protective cap from the Ethernet
port marked with a symbol on your
machine.
c Connect the network interface cable to the
Ethernet port on your machine, and then
connect it to a free port on your hub.
d Make sure your machine is turned on.
16
Install MFL-Pro Suite
a Put the CD-ROM into your CD-ROM drive, and
then double-click the BROTHER icon on your
desktop.
b Double-click the Start Here OSX icon. If
prompted, select your model.
c (MFC-9330CDW / MFC-9340CDW)
Choose Wired Network Connection
(Ethernet), and then click Next.
d The installation screens appear one after
another. If prompted, follow any on-screen
instructions.
e Choose your machine from the list, and then
click Next.
IMPORTANT
For Mac OS X v10.6.7 or lower users: upgrade to
Mac OS X v10.6.8, 10.7.x, 10.8.x. (For the latest
drivers and information for the Mac OS X you are
using, visit http://solutions.brother.com/
.)
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few minutes for the
installation to complete.
NOTE
If your machine is not found over the network,
confirm your network settings (see Before you
install uu page 19).
20
Macintosh
Wired Network
f When the Add Printer screen appears, click
Add Printer.
g Choose your machine from the list, click Add,
and then click Next.
(OS X v10.8.x)
Select MFC-XXXX CUPS driver from the Use
pop-up menu (where XXXX is your model
name).
17
Download and install
Presto! PageManager
When Presto! PageManager is installed, OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto! PageManager.
a On the Brother Support screen, click
Presto! PageManager and follow the
on-screen instructions.
18
Install MFL-Pro Suite on
additional computers
(if needed)
If you want to use your machine with multiple
computers on the network, install MFL-Pro Suite on
each computer. Go to step 15 on page 19.
NOTE
• If there is more than one of the same model
connected on your network, the IP Address will
be displayed to help you identify the machine.
• You can find your machine’s IP Address by
printing out the Network Configuration Report
(see Print the Network Configuration Report uu
page 39).
• If the Setup Network "Scan to" name screen
appears, follow the instructions below:
1) Enter a name for your Macintosh (up to
15 characters long).
2) Click Next. Go to f.
The name you enter will appear on the
machine’s Touchscreen when you press the
Scan button and choose a scan option (for
more information: uu Software User's Guide).
NOTE
To add the PS driver (BR-Script3 printer driver),
select it from the Print Using (Use) pop-up menu.
The installation of MFL-Pro Suite is now
complete.
Go to step 17 on page 20.
Finish
The installation is now
complete.
21
For Wireless Network Users
Wireless Network
Windows
®
Macintosh
For Wireless Network Interface Users
(MFC-9330CDW / MFC-9340CDW)
15
Before you begin
First you must configure the wireless network settings of your machine to communicate with your wireless access
point/router. After the machine is configured to communicate with your wireless access point/router, the computers
and mobile devices on your network will have access to the machine. To use the machine from a computer, you
must install the drivers and software. The following steps will guide you through the configuration and installation
process:
Infrastructure Mode
IMPORTANT
• If you are going to connect the machine to your network, we recommend that you contact your system
administrator prior to installation. You must know your wireless network settings before you proceed with this
installation.
• If you have previously configured the wireless settings of the machine, you must reset the network settings
before you can configure the wireless settings again.
1. On your machine, press , and All Settings.
2. Swipe up or down, or press a or b to display Network, and press Network.
3. Swipe up or down, or press a or b to display Network Reset, and press Network Reset.
4. Press Yes.
5. Press Yes for two seconds.
NOTE
• To achieve optimum results with normal everyday document printing, place the Brother machine as close to
the wireless access point/router as possible, with minimal obstructions. Large objects and walls between the
two devices and interference from other electronic devices can affect the data transfer speed of your
documents.
Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as multi-page documents with mixed text and large graphics,
you may want to consider choosing wired Ethernet for a faster data transfer or USB for the fastest throughput
speed.
• Although the Brother MFC-9330CDW and MFC-9340CDW can be used in both a wired and a wireless
network, only one of the connection methods can be used at a time.
• If you use your machine in an IEEE 802.1x supported wireless network: uu Network User's Guide: Using
IEEE 802.1x authentication.
a Wireless access point/router
b Wireless Network machine (your machine)
c Wireless capable computer connected to
the wireless access point/router
d Wired computer connected to the wireless
access point/router
e Mobile device connected to the wireless
access point/router
22
For Wireless Network Users
16
Choose your wireless setup method
The following instructions will offer three methods for setting up your Brother
machine on a wireless network. Choose the method you prefer for your
environment.
For methods b and c, start your wireless setup by pressing the button on
the Touchscreen.
a Setup using the CD-ROM and temporarily using a USB cable (Windows
®
and Macintosh)
We recommend using a computer wirelessly connected to your network for this method.
* The Network Key may also be described as the Password, Security Key, or Encryption Key.
Now go to
page 24
IMPORTANT
• You need to temporarily use a USB cable during configuration (cable not included).
• If you are using Windows
®
XP, or using a network cable to connect your computer to your wireless
access point/router, you need to know the SSID (Network Name) and Network Key of your wireless
access point/router before you proceed. Please write down your wireless network settings in the area
below.
• If you need assistance during setup and want to contact Brother Customer Service, make sure you
have your SSID and Network Key ready. We cannot assist you in locating this information.
Item Record the current wireless network settings
SSID (Network Name)
Network Key* (Security Key/Encryption Key)
NOTE
• If you do not know this information (SSID and Network Key), you cannot continue the wireless setup.
• To find this information (SSID and Network Key):
1. Check the documentation provided with your wireless access point/router.
2. The default SSID could be the access point/router manufacturer's name or the model name.
3. If you do not know the security information, please consult the router manufacturer, your system
administrator, or your internet provider.
23
For Wireless Network Users
Wireless Network
Windows
®
Macintosh
b Manual setup from the control panel using the Setup Wizard (Windows
®
, Macintosh and
mobile devices)
If your wireless access point/router does not support WPS (Wi-Fi Protected Setup™) or AOSS™,
write down the wireless network settings of your wireless access point/router in the area below.
* The Network Key may also be described as the Password, Security Key, or Encryption Key.
Now go to
page 27
IMPORTANT
If you need assistance during setup and want to contact Brother Customer Service, make sure you have
your SSID (Network Name) and Network Key ready. We cannot assist you in locating this information.
Item Record the current wireless network settings
SSID (Network Name)
Network Key* (Security Key/Encryption Key)
NOTE
• If you do not know this information (SSID and Network Key), you cannot continue the wireless setup.
• To find this information (SSID and Network Key):
1. Check the documentation provided with your wireless access point/router.
2. The default SSID could be the access point/router manufacturer's name or the model name.
3. If you do not know the security information, please consult the router manufacturer, your system
administrator, or your internet provider.
c One-push setup using WPS or AOSS™ (Windows
®
, Macintosh and mobile devices)
Use this method if your wireless access point/router supports automatic wireless (one-push) setup
(WPS or AOSS™).
Now go to
page 29
24
For Wireless Network Users
Setup using the CD-ROM and temporarily using a USB cable
(Windows
®
and Macintosh)
17
Set up the wireless
settings
a Put the CD-ROM into your CD-ROM drive.
b (Windows
®
)
Click Install MFL-Pro Suite, and click Yes in
the next two windows if you accept the license
agreements.
(Macintosh)
Double-click the BROTHER icon on your
desktop, and then double-click the
Start Here OSX icon on the screen. If
prompted, select your model.
c Choose Wireless Network Connection, and
then click Next.
For Windows
®
, go to d
For Macintosh, go to e
IMPORTANT
• You need to temporarily use a USB cable during
configuration (cable not included).
• If you are using Windows
®
XP, or using a
network cable to connect your computer to your
wireless access point/router, you need to know
the SSID and Network Key of your wireless
access point/router that you wrote down in step
16-a on page 22 before you proceed.
NOTE
• If you use your machine in an IEEE 802.1x
supported wireless network: uu Network User's
Guide: Using IEEE 802.1x authentication.
• The screens in this step are from Windows
®
.
The screens on your computer will vary
depending on your operating system.
NOTE
(Windows
®
)
• If the model name screen appears, choose your
machine. If the language screen appears,
choose your language.
• If the Brother screen does not appear
automatically, go to Computer (My
Computer).
(For Windows
®
8: click the (File Explorer)
icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then
double-click start.exe.
• If the User Account Control screen appears,
click Continue or Yes.
NOTE
If the installation does not continue automatically,
restart the installation by ejecting and then
reinserting the CD-ROM or by double-clicking the
start.exe program from the root folder. Continue
from step b to install MFL-Pro Suite.
NOTE
(Windows
®
)
To install the PS driver (BR-Script3 printer driver),
choose Custom Install, and then follow the
on-screen instructions.
25
For Wireless Network Users
Wireless Network
Windows
®
Macintosh
d When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended) and click Next.
If you are not using the Windows
®
Firewall, see
the user’s guide for your software for
information on how to add the following
network ports:
For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP port
54926.
If you still have trouble with your network
connection, add UDP ports 161 and 137.
e Choose Yes, I have a USB cable to use for
installation., and then click Next.
f Temporarily connect the USB cable (not
included) directly to the computer and the
machine.
g Do one of the following:
If the Installation confirmation screen
appears, check the box and click Next, and
then go to h.
If the Installation confirmation screen
does not appear, go to i.
h Check Yes if you want to connect with the listed
SSID. Click Next, and then go to k.
i The wizard will search for available wireless
networks from your machine. Choose the SSID
that you wrote down for your network in step
16-a on page 22, and then click Next.
j Enter the Network Key you wrote down in step
16-a on page 22, and then click Next.
NOTE
If the Important Notice screen appears, read the
notice. Check the box after you confirm the SSID
and Network Key, and then click Next.
NOTE
• If the list is blank, check that the wireless access
point/router has power and is broadcasting the
SSID. See if the machine and the wireless
access point/router are within range for wireless
communication. Click Refresh.
• If your wireless access point/router is set to not
broadcast the SSID, manually add it by clicking
the Advanced button. Follow the on-screen
instructions for entering the Name(SSID), and
then click Next.
NOTE
If your network is not configured for
Authentication and Encryption, the ATTENTION!
screen will appear. To continue configuration,
click OK.
26
For Wireless Network Users
k Confirm the wireless network settings, and
then click Next. The settings will be sent to your
machine.
l Disconnect the USB cable between the
computer and the machine, and then click
Next.
To install the MFL-Pro Suite, continue to
step 19.
For Windows
®
Users:
Now go to
step 19-e on page 35
For Macintosh Users:
Now go to
step 19-d on page 37
NOTE
• The settings will remain unchanged if you click
Cancel.
• To manually enter the IP address settings of
your machine, click Change IP Address and
enter the necessary IP address settings for your
network.
• If the wireless setup failure screen appears,
click Retry.
Wireless setup is now complete.
A four-level indicator at the top right of
your machine’s Touchscreen will show
the wireless signal strength of your
wireless access point/router.
27
For Wireless Network Users
Wireless Network
Windows
®
Macintosh
Manual setup from the control panel using the Setup Wizard
(Windows
®
, Macintosh and mobile devices)
17
Set up the wireless
settings
a On your machine, press .
Press Setup Wizard.
b When Enable WLAN? is displayed, press
Yes. This will start the wireless setup wizard.
c The machine will search for available SSIDs. It
will take a few minutes to display a list of
available SSIDs.
If a list of SSIDs is displayed, swipe up or down,
or press a or b to choose the SSID you wrote
down in step 16-b on page 23.
Press OK.
d Do one of the following:
If the wireless access point/router of the
selected SSID supports WPS and the
machine asks to use WPS, go to e.
If you are using an authentication and
encryption method that requires a Network
Key, go to f.
If your authentication method is Open
System and your encryption mode is None,
go to g.
e To connect your machine using the automatic
wireless mode, press Yes. (If you choose
No (Manual), go to f to enter the Network
Key.) When the Touchscreen instructs you to
start WPS, press the WPS button on your
wireless access point/router, and then press
Next on the Touchscreen. Go to g.
f Enter the Network Key you wrote down in step
16-b on page 23 using the numbers and
characters on the Touchscreen.
Press OK when you have entered all the
characters, and then press Yes to apply your
settings.
g Your machine will now try to connect to your
wireless network using the information you
have entered.
A connection result message appears on the
Touchscreen and a WLAN report will
automatically print.
If the connection failed, check the error code on
the printed report and refer to Troubleshooting
uu page 30.
Press OK.
IMPORTANT
You must have the wireless settings you wrote
down for your network in step 16-b on page 23
before you proceed.
NOTE
If you use your machine in an IEEE 802.1x
supported wireless network: uu Network User's
Guide: Using IEEE 802.1x authentication.
NOTE
• If the list is blank, check that the wireless access
point/router has power and is broadcasting the
SSID. Move your machine closer to the wireless
access point/router and try starting from a
again.
• If your wireless access point/router is set to not
broadcast the SSID you will have to manually
add the SSID name. For details: uu Network
User's Guide: Configuring your machine when
the SSID is not broadcast.
NOTE
• To enter numbers or special characters, press
repeatedly until the character you want to
enter appears, then press the character you
want.
• If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, then press .
• To enter a space, press Space.
• For more details, see Entering Text uu
page 33.
Wireless setup is now complete.
A four-level indicator at the top right of
your machine’s Touchscreen will show
the wireless signal strength of your
wireless access point/router.
28
For Wireless Network Users
To install the MFL-Pro Suite, continue to
step 18.
For Windows
®
Users:
Now go to
page 34
For Macintosh Users:
Now go to
page 37
NOTE
For mobile device users, see the Advanced
Network User's Guides for details on how to use
your machine with your mobile device(s). To
download the User’s Guide for the application you
are using, visit the Brother Solutions Center at
http://solutions.brother.com/
and click Manuals on
your model's page.
29
For Wireless Network Users
Wireless Network
Windows
®
Macintosh
One-push setup using WPS (Wi-Fi Protected Setup) or AOSS™
(Windows
®
, Macintosh and mobile devices)
17
Configure the wireless
settings
a Confirm that your wireless access point/router
has the WPS or AOSS™ symbol as shown
below.
b Place the Brother machine within range of your
WPS or AOSS™ access point/router. The
range may differ depending on your
environment (see the instructions provided with
your wireless access point/router).
c On your machine, press .
Press WPS/AOSS.
d When Enable WLAN? is displayed, press
Yes. This will start the wireless setup wizard.
e When the Touchscreen instructs you to start
WPS or AOSS™, press the WPS or AOSS™
button on your wireless access point/router (for
more information, see the instructions provided
with your wireless access point/router), and
then press OK on your machine.
This feature will automatically detect which
mode (WPS or AOSS™) your wireless access
point/router uses to configure your machine.
f A connection result message appears on the
Touchscreen and a WLAN report will
automatically print.
If the connection failed, check the error code on
the printed report and refer to Troubleshooting
uu page 30.
Press OK.
To install the MFL-Pro Suite, continue to
step 18.
For Windows
®
Users:
Now go to
page 34
For Macintosh Users:
Now go to
page 37
NOTE
If your wireless access point/router supports WPS
and you want to configure your machine using the
PIN (Personal Identification Number) Method: uu
Network User's Guide: Configuration using the
PIN Method of WPS (Wi-Fi Protected Setup).
Wireless setup is now complete.
A four-level indicator at the top right of
your machine’s Touchscreen will show
the wireless signal strength of your
wireless access point/router.
NOTE
For mobile device users, see the Advanced
Network User's Guides for details on how to use
your machine with your mobile device(s). To
download the User’s Guide for the application you
are using, visit the Brother Solutions Center at
http://solutions.brother.com/
and click Manuals on
your model's page.
30
For Wireless Network Users
Troubleshooting
To find the wireless settings (SSID (Network Name) and Network Key)*
* The Network Key may also be described as the Password, Security Key, or Encryption Key.
* If the wireless access point/router is set not to broadcast the SSID, the SSID will not be detected automatically.
You must manually enter the SSID name (uu Network User's Guide: Configuring your machine when the SSID
is not broadcast).
WLAN report
If the printed WLAN report shows that the connection failed, check the error code on the printed report and refer
to the following instructions:
IMPORTANT
If you need assistance during setup and want to contact Brother Customer Service, make sure you have your
SSID (Network Name) and Network Key ready. We cannot assist you in locating this information.
1. Check the documentation provided with your wireless access point/router.
2. The default SSID could be the access point/router manufacturer's name or the model name.
3. If you do not know the security information, please consult the router manufacturer, your system
administrator, or your internet provider.
Error Code Recommended Solutions
TS-01
The wireless setting is not activated, turn the wireless setting to ON.
- If a LAN cable is connected to your machine, disconnect it and turn the wireless setting of
your machine to ON.
1. On your machine, press .
2. Press Network.
3. Press WLAN, and then press Setup Wizard.
4. When Enable WLAN? is displayed, press Yes. This will start the wireless setup wizard.
TS-02
The wireless access point/router cannot be detected.
- Check the following four points:
1. Make sure the wireless access point/router is powered on.
2. Move your machine to an obstruction-free area, or closer to the wireless access
point/router.
3. Temporarily place your machine within about one metre from the wireless access
point/router when you are configuring the wireless settings.
4. If your wireless access point/router is using MAC address filtering, confirm that the MAC
address of the Brother machine is allowed in the filter (see Print the Network
Configuration Report uu page 39).
- If you manually entered the SSID and security information (SSID/authentication
method/encryption method/Network Key), the information may be incorrect.
Confirm the SSID and security information (see To find the wireless settings (SSID
(Network Name) and Network Key)* uu page 30). Re-enter the correct information, if
necessary.
31
For Wireless Network Users
Wireless Network
Windows
®
Macintosh
TS-03
The wireless network and security setting you entered may be incorrect.
Confirm that the wireless network settings are correct (see To find the wireless settings
(SSID (Network Name) and Network Key)* uu page 30).
* Check if the entered or selected SSID/authentication method/encryption method/Network
Key are correct.
TS-04
The Authentication/Encryption methods used by the selected wireless access point/router
are not supported by your machine.
For infrastructure mode, change the authentication and encryption methods of the wireless
access point/router. Your machine supports the following authentication methods WPA™,
WPA2™, OPEN and Shared key. WPA supports TKIP or AES encryption methods. WPA2
supports AES for the encryption method. OPEN and Shared key correspond to WEP
encryption.
If your problem is not solved, the SSID or network settings you entered may be incorrect.
Confirm that the wireless network settings are correct (see To find the wireless settings
(SSID (Network Name) and Network Key)* uu page 30).
Combined table of authentication and encryption methods
For ad-hoc mode, change the authentication and encryption methods of your computer for
the wireless setting.
Your machine supports OPEN authentication method only, with optional WEP encryption.
TS-05
The security information (SSID/Network Key) is incorrect.
Confirm that the SSID and security information (Network Key) are correct (see To find the
wireless settings (SSID (Network Name) and Network Key)* uu page 30).
If your router uses WEP encryption, enter the key used as the first WEP key. Your machine
supports the use of the first WEP key only.
TS-06
The wireless security information (Authentication method/Encryption method/Network Key)
is incorrect.
Confirm the wireless security information as shown in the “Combined table of authentication
and encryption methods” table in error TS-04.
If your router uses WEP encryption, enter the key used as the first WEP key. Your machine
supports the use of the first WEP key only.
Confirm the Network Key (see To find the wireless settings (SSID (Network Name) and
Network Key)* uu page 30).
Error Code Recommended Solutions
Authentication method Encryption method
WPA-Personal
TKIP
AES
WPA2-Personal AES
OPEN
WEP
NONE (without encryption)
Shared key WEP
32
For Wireless Network Users
TS-07
The machine cannot detect a wireless access point/router that has WPS or AOSS™
enabled.
To configure your wireless settings using WPS or AOSS™, you must operate both your
machine and the wireless access point/router.
Confirm your wireless access point/router supports WPS or AOSS™ and try starting again.
If you do not know how to operate your wireless access point/router using WPS or AOSS™,
see the documentation provided with your wireless access point/router, ask the manufacturer
of your wireless access point/router, or ask your network administrator.
TS-08
Two or more wireless access points/routers that have WPS or AOSS™ enabled are
detected.
- Confirm that only one wireless access point/router within range has WPS or AOSS™
active and try again.
- Try starting again after a few minutes in order to avoid interference from other wireless
access points/routers.
Error Code Recommended Solutions
33
For Wireless Network Users
Wireless Network
Windows
®
Macintosh
Entering Text
When you are setting certain menu selections, you may need to enter text into the machine.
Press repeatedly to choose between letters, numbers and special characters.
Press to change between upper case and lower case.
Inserting spaces
To enter a space, press Space.
Making corrections
If you entered a character incorrectly and want to change it, press d or c to move the cursor under the incorrect
character, and then press . Enter the correct character.
NOTE
• The characters available may differ depending on your country.
• The keyboard layout may differ depending on the function you are setting.
34
Windows
®
Wireless Network
Install the Drivers and Software
(Windows
®
XP/XP Professional x64 Edition/Windows Vista
®
/
Windows
®
7/Windows
®
8) (MFC-9330CDW / MFC-9340CDW)
18
Before you install
a Make sure your computer is ON and you are
logged on with Administrator rights.
19
Install MFL-Pro Suite
a Put the CD-ROM into your CD-ROM drive. If
the model name screen appears, choose your
machine. If the language screen appears,
choose your language.
b Click Install MFL-Pro Suite, and click Yes in
the next two windows if you accept the license
agreements.
c Choose Wireless Network Connection, and
then click Next.
d When the Firewall/AntiVirus detected screen
appears, choose Change the Firewall port
settings to enable network connection and
continue with the installation.
(Recommended) and click Next.
If you are not using the Windows
®
Firewall, see
the user’s guide for your software for
information on how to add the following
network ports:
For network scanning, add UDP port 54925.
For network PC-Fax receiving, add UDP port
54926.
If you still have trouble with your network
connection, add UDP ports 161 and 137.
IMPORTANT
• If there are any programs running, close them.
• The screens may differ depending on your
operating system.
NOTE
• The CD-ROM includes Nuance™ PaperPort™
12SE. This software supports Windows
®
XP
(SP3 or greater), XP Professional x64 Edition
(SP2 or greater), Windows Vista
®
(SP2 or
greater), Windows
®
7 and Windows
®
8. Update
to the latest Windows
®
Service Pack before
installing MFL-Pro Suite.
• Disable all personal firewall software (other
than Windows
®
Firewall), anti-spyware, or
antivirus applications for the duration of the
installation.
NOTE
• If the Brother screen does not appear
automatically, go to Computer (My
Computer).
(For Windows
®
8: click the (File Explorer)
icon on the taskbar, and then go to Computer.)
Double-click the CD-ROM icon, and then
double-click start.exe.
• If the User Account Control screen appears,
click Continue or Yes.
NOTE
If the installation does not continue automatically,
restart the installation by ejecting and then
reinserting the CD-ROM or by double-clicking the
start.exe program from the root folder. Continue
from step b to install MFL-Pro Suite.
NOTE
To install the PS driver (BR-Script3 printer driver),
choose Custom Install, and then follow the
on-screen instructions.
35
Windows
®
Wireless Network
Wireless Network
Windows
®
Macintosh
e Choose the machine from the list, and then
click Next.
f The installation will automatically continue. The
installation screens appear one after another. If
prompted, follow any on-screen instructions.
g When the On-Line Registration screen
appears, make your selection and follow the
on-screen instructions. Once you have
completed the registration process, click Next.
h When the Setup is Complete screen appears,
make your selection, and then click Next.
20
Finish and restart
a Click Finish to restart your computer. After
restarting the computer, you must log on with
Administrator rights.
21
Install MFL-Pro Suite on
additional computers
(if needed)
If you want to use your machine with multiple
computers on the network, install MFL-Pro Suite on
each computer. Go to step 18 on page 34.
NOTE
• If your wireless settings fail, click the Wireless
Setup button and follow the on-screen
instructions to complete the wireless
configuration.
• If you are using WEP and the Touchscreen
displays Connected but your machine is not
found, make sure you entered the WEP key
correctly. The WEP key is case-sensitive.
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few minutes for all
screens to appear.
NOTE
If the Windows Security screen appears, select
the check box and click Install to complete the
installation correctly.
NOTE
• If an error message appears during the
software installation, do one of the following:
- For Windows
®
XP, Windows Vista
®
and
Windows
®
7 users: run the Installation
Diagnostics located in (Start) >
All Programs > Brother > MFC-XXXX LAN
(where MFC-XXXX is your model name).
- For Windows
®
8 users: to run Installation
Diagnostics, double-click the (Brother
Utilities) icon on the desktop, and then click
the drop-down list and select your model
name (if not already selected). Click Tools in
the left navigation bar.
• Depending on your security settings when using
the machine or its software, a Windows
®
Security or antivirus software window may
appear. Please allow or permit the window to
continue.
NOTE
Network license (Windows
®
)
This product includes a PC license for up to
five users. This license supports the installation of
the MFL-Pro Suite including Nuance™
PaperPort™ 12SE on up to five PCs on the
network. If you want to use more than five PCs
with Nuance™ PaperPort™ 12SE installed,
please purchase the Brother NL-5 pack which is a
multiple PC license agreement pack for up to
five additional users. To purchase the NL-5 pack,
contact your authorized Brother dealer or contact
Brother customer service.
36
Windows
®
Wireless Network
Finish
The installation is now
complete.
NOTE
• For Windows
®
8 users: if the Brother manuals
included on the CD-ROM are in PDF format,
use Adobe
®
Reader
®
to open them. If Adobe
®
Reader
®
is installed on your computer but
cannot open the files in Adobe
®
Reader
®
,
change the file association for PDF (see How to
open a PDF file in Adobe
®
Reader
®
(Windows
®
8) uu page 40).
• XML Paper Specification Printer Driver
The XML Paper Specification Printer Driver is
the most suitable driver for Windows Vista
®
,
Windows
®
7 and Windows
®
8 when printing
from applications that use the XML Paper
Specification. Please download the latest driver
from the Brother Solutions Center at
http://solutions.brother.com/
.
37
Macintosh
Wireless Network
Wireless Network
Windows
®
Macintosh
Install the Drivers and Software
(Mac OS X v10.6.8, 10.7.x, 10.8.x) (MFC-9330CDW / MFC-9340CDW)
18
Before you install
a Make sure your machine is connected to an AC
power source and your Macintosh is ON. You
must be logged on with Administrator rights.
19
Install MFL-Pro Suite
a Put the CD-ROM into your CD-ROM drive, and
then double-click the BROTHER icon on your
desktop.
b Double-click the Start Here OSX icon. If
prompted, select your model.
c Choose Wireless Network Connection, and
then click Next.
d Choose your machine from the list, and then
click Next.
e The installation screens appear one after
another. If prompted, follow any on-screen
instructions.
IMPORTANT
For Mac OS X v10.6.7 or lower users: upgrade to
Mac OS X v10.6.8, 10.7.x, 10.8.x. (For the latest
drivers and information for the Mac OS X you are
using, visit http://solutions.brother.com/
.)
NOTE
If your wireless settings fail, the Wireless Device
Setup Wizard screen appears. Follow the
on-screen instructions to complete the wireless
configuration.
NOTE
• If there is more than one of the same model
connected on your network, the IP Address will
be displayed to help you identify the machine.
• You can find your machine’s IP Address by
printing out the Network Configuration Report
(see Print the Network Configuration Report uu
page 39).
IMPORTANT
DO NOT cancel any of the screens during the
installation. It may take a few minutes for the
installation to complete.
NOTE
If the Setup Network "Scan to" name screen
appears, follow the instructions below:
1) Enter a name for your Macintosh (up to
15 characters long).
2) Click Next. Go to f.
The name you enter will appear on the machine’s
Touchscreen when you press the Scan button
and choose a scan option (for more information:
uu Software User's Guide).
38
Macintosh
Wireless Network
f When the Add Printer screen appears, click
Add Printer.
g Choose your machine from the list, click Add,
and then click Next.
(OS X v10.8.x)
Select MFC-XXXX CUPS driver from the Use
pop-up menu (where XXXX is your model
name).
20
Download and install
Presto! PageManager
When Presto! PageManager is installed, OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto! PageManager.
a On the Brother Support screen, click
Presto! PageManager and follow the
on-screen instructions.
21
Install MFL-Pro Suite on
additional computers
(if needed)
If you want to use your machine with multiple
computers on the network, install MFL-Pro Suite on
each computer. Go to step 18 on page 37.
NOTE
To add the PS driver (BR-Script3 printer driver),
select it from the Print Using (Use) pop-up menu.
The installation of MFL-Pro Suite is now
complete.
Go to step 20 on page 38.
Finish
The installation is now
complete.
39
For Network Users
Web Based Management
(web browser)
The Brother print server is equipped with a web server
that allows you to monitor its status or change some
of its configuration settings using HTTP (Hypertext
Transfer Protocol).
a Open your browser.
b Type “http://machine’s IP address/” into your
browser’s address bar (where “machine’s IP
address” is the IP address of the Brother
machine or the print server name).
For example: http://192.168.1.2/
Print the Network Configuration
Report
You can print the Network Configuration Report to
confirm the current network settings.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Print Reports.
Press Print Reports.
d Swipe up or down, or press a or b to display
Network Configuration.
Press Network Configuration.
e Press OK.
The machine will print the current network
settings.
Restore the network settings to
the factory default
You can restore all network settings of the internal
Print/Scan server to the factory default.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to display
Network.
Press Network.
d Swipe up or down, or press a or b to display
Network Reset.
Press Network Reset.
e Press Yes.
f Press Yes for two seconds.
The machine will restart. Disconnect the
cables, and after the machine has restarted,
reconnect the cables.
NOTE
We recommend Windows
®
Internet
Explorer
®
8.0/9.0 for Windows
®
and Safari 5.0 for
Macintosh. Please also make sure JavaScript
and cookies are always enabled in whichever
browser you use. To use a web browser, you will
need to know the IP address of the print server,
which is listed on the Network Configuration
Report.
NOTE
If you have configured an optional login
password, you must enter it when prompted to
access the Web Based Management.
For more information: uu Network User's
Guide: Web Based Management.
Other Information
40
Colour Correction
The output density and print position of each colour
may vary depending on the machine's environment.
Factors like temperature and humidity can affect
colour. Colour calibration and colour registration help
you to improve the colour density and the print
position of each colour.
Colour Calibration
Calibration helps you to improve the colour density.
Using the control panel
a Press (Toner).
b Press Calibration.
c Press Calibrate.
d Press Yes.
e Press .
Colour Registration
Auto Registration
Auto registration helps you to improve the print
position of each colour.
a Press (Toner).
b Press Auto Regist..
c Press Yes.
d Press .
How to open a PDF file in Adobe
®
Reader
®
(Windows
®
8)
a Move your mouse to the lower right corner of
your desktop. When the menu bar appears,
click Settings, and then click Control Panel.
b Click Programs, click Default Programs, and
then click Associate a file type or protocol
with a program.
c Select .pdf, and then click on the Change
program... button.
d Click Adobe Reader. The icon next to .pdf
changes to the 'Adobe Reader' icon.
Adobe
®
Reader
®
is now the default application
for reading .pdf files until you change this file
association.
Brother CreativeCenter
Get inspired. If you're using Windows
®
, double-click
the Brother CreativeCenter icon on your desktop to
access our FREE website with many ideas and
resources for personal and professional use.
For Windows
®
8 users: click (Brother Utilities),
and then click the drop-down list and select your
model name (if not already selected). Click Use More
in the left navigation bar, and then click Brother
Creative Center.
Mac users can access Brother CreativeCenter at this
web address:
http://www.brother.com/creativecenter/
NOTE
• If you print using the Direct Print feature
(MFC-9330CDW / MFC-9340CDW) or the
BR-Script printer driver, you need to perform
the calibration from the control panel (see Using
the control panel uu page 40).
• If you print using the Windows
®
printer driver,
the driver will get the calibration data
automatically if both Use Calibration Data and
Get Device Data Automatically are on (uu
Software User's Guide).
• If you print using the Macintosh printer driver,
the driver will get the calibration data
automatically.
41
Consumables
Consumables
When the time comes to replace consumable items such as toner or drums, an error message will appear on your
machine's Touchscreen. For more information about the consumables for your machine, visit us at
http://www.brother.com/original/
or contact your local Brother reseller.
NOTE
The drum unit and toner cartridge are two separate parts.
Toner Cartridges Drum Units
Standard Toner: TN-241 (C/M/Y/BK)
High Yield Toner: TN-245 (C/M/Y)
DR-241CL
Belt Unit Waste Toner Box
BU-220CL WT-220CL
For more information on replacing the consumable items: uu Basic User's Guide: Replacing the
consumable items.
www.brotherearth.com
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a trademark of Brother Industries, Ltd.
Microsoft, Windows, Windows Vista, Windows Server and Internet Explorer are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Apple, Macintosh, Safari and Mac OS are trademarks of Apple Inc., registered in the U.S. and other countries.
Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.
Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.
Wi-Fi Direct, Wi-Fi Protected Setup (WPS), WPA and WPA2 are marks of the Wi-Fi Alliance.
AOSS is a trademark of Buffalo Inc.
Android is a trademark of Google Inc.
Nuance, the Nuance logo, PaperPort and ScanSoft are trademarks or registered trademarks of Nuance Communications, Inc. or its affiliates
in the United States and/or other countries.
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary programs.
Any trade names and product names of companies appearing on Brother products, related documents and any other
materials are all trademarks or registered trademarks of those respective companies.
Compilation and Publication
Under the supervision of Brother Industries, Ltd., this manual has been compiled and published, covering the latest product descriptions and
specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for
any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other
errors relating to the publication.
Copyright and License
©2012 Brother Industries, Ltd. All rights reserved.
This product includes software developed by the following vendors:
©1983-1998 PACIFIC SOFTWORKS, INC. ALL RIGHTS RESERVED.
©2008 Devicescape Software, Inc. All rights reserved.
This product includes the “KASAGO TCP/IP” software developed by ZUKEN ELMIC, Inc.
1 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother MFC-9332CDW bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother MFC-9332CDW in de taal/talen: Engels als bijlage per email.

De handleiding is 6,1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Brother MFC-9332CDW

Brother MFC-9332CDW Installatiehandleiding - Nederlands - 44 pagina's

Brother MFC-9332CDW Gebruiksaanwijzing - Nederlands - 80 pagina's

Brother MFC-9332CDW Gebruiksaanwijzing - Nederlands - 252 pagina's

Brother MFC-9332CDW Installatiehandleiding - Deutsch - 44 pagina's

Brother MFC-9332CDW Gebruiksaanwijzing - Deutsch - 78 pagina's

Brother MFC-9332CDW Gebruiksaanwijzing - Deutsch - 259 pagina's

Brother MFC-9332CDW Gebruiksaanwijzing - English - 75 pagina's

Brother MFC-9332CDW Gebruiksaanwijzing - English - 234 pagina's

Brother MFC-9332CDW Installatiehandleiding - Français - 44 pagina's

Brother MFC-9332CDW Gebruiksaanwijzing - Français - 79 pagina's

Brother MFC-9332CDW Gebruiksaanwijzing - Français - 256 pagina's

Brother MFC-9332CDW Aanvulling / aanpassing - Alle talen - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info