585302

Brother MFC-9140CDN Handleiding

7
Verklein
Vergroot
Pagina terug
1/75
Pagina verder
Advanced User’s Guide
MFC-9140CDN
MFC-9330CDW
MFC-9340CDW
Not all models are available in all countries.
Version 0
UK/IRE
i
User’s Guides and where do I find them?
Which Guide? What’s in it? Where is it?
Product Safety
Guide
Read this Guide first. Please read the Safety
Instructions before you set up your machine.
See this Guide for trademarks and legal
limitations.
Printed / In the box
Quick Setup Guide Follow the instructions for setting up your
machine and installing the drivers and
software for the operating system and
connection type you are using.
Printed / In the box
Basic User's Guide Learn the basic Fax, Copy, Scan and Direct
Print operations and how to replace
consumables. See troubleshooting tips.
Printed / In the box
For
Czech Republic,
Hungary,
Republic of Bulgaria,
Republic of Poland,
Romania,
Slovak Republic :
PDF file / CD-ROM / In the box
Advanced User's
Guide
Learn more advanced operations: Fax,
Copy, security features, printing reports and
performing routine maintenance.
PDF file / CD-ROM / In the box
Software User's
Guide
Follow these instructions for Printing,
Scanning, Network Scanning, Remote
Setup, PC-Fax, and using the Brother
ControlCenter utility.
HTML file / CD-ROM / In the box
Network User's
Guide
This Guide provides useful information
about wired and wireless network settings
and security settings using the Brother
machine. You can also find supported
protocol information for your machine and
detailed troubleshooting tips.
PDF file / CD-ROM / In the box
Wi-Fi Direct™ Guide
(MFC-9330CDW and
MFC-9340CDW)
This Guide provides details on how to
configure and use your Brother machine for
wireless printing directly from a mobile
device supporting the Wi-Fi Direct™
standard.
PDF file / Brother Solutions
Center
1
Google Cloud Print
Guide
This Guide provides details on how to
configure your Brother machine to a Google
account and use Google Cloud Print
services for printing over the Internet.
PDF file / Brother Solutions
Center
1
Mobile Print/Scan
Guide for Brother
iPrint&Scan
This Guide provides useful information
about printing from your mobile device and
scanning from your Brother machine to your
mobile device when connected on a Wi-Fi
network.
PDF file / Brother Solutions
Center
1
ii
1
Visit us at http://solutions.brother.com/.
Web Connect Guide This Guide provides details about how to
configure and use your Brother machine to
scan, load and view images and files on
certain Web sites that provide these
services.
PDF file / Brother Solutions
Center
1
AirPrint Guide This Guide provides information for using
AirPrint to print from OS X v10.7.x, 10.8.x
and your iPhone, iPod touch, iPad, or other
iOS device to your Brother machine without
installing a printer driver.
PDF file / Brother Solutions
Center
1
Which Guide? What’s in it? Where is it?
iii
Table of Contents
1 General Setup 1
Memory storage.....................................................................................................1
Automatic Daylight Saving Time............................................................................1
Ecology features....................................................................................................2
Toner Save......................................................................................................2
Sleep Time ......................................................................................................2
Deep Sleep mode............................................................................................3
Touchscreen..........................................................................................................3
Setting the backlight brightness.......................................................................3
Setting the Dim Timer for the backlight ...........................................................4
2 Security features 5
Secure Function Lock 2.0......................................................................................5
Before you begin to use Secure Function Lock 2.0.........................................6
Setting and changing the Administrator Password..........................................6
Setting up restricted users...............................................................................7
Setting up and changing the Public user mode ...............................................7
Turning Secure Function Lock on/off...............................................................8
Switching Users...............................................................................................9
Setting Lock.........................................................................................................10
Setting up the administrator password ..........................................................10
Changing the Setting Lock administrator password ......................................11
Turning Setting Lock on/off............................................................................11
Dial Restriction.....................................................................................................12
Dial pad restriction.........................................................................................12
Address Book restriction................................................................................12
Shortcuts restriction.......................................................................................12
iv
3 Sending a fax 13
Additional sending options...................................................................................13
Sending faxes using multiple settings ...........................................................13
Changing a 2-sided fax layout (MFC-9340CDW)..........................................14
Contrast.........................................................................................................15
Changing Fax Resolution ..............................................................................15
Additional sending operations..............................................................................16
Sending a fax manually .................................................................................16
Dual access...................................................................................................16
Broadcasting..................................................................................................17
Real Time Transmission................................................................................19
Overseas Mode .............................................................................................19
Delayed Fax ..................................................................................................20
Delayed batch transmission ..........................................................................20
Checking and cancelling waiting jobs............................................................21
Setting your changes as the new default.......................................................21
Restoring all fax settings to the factory settings ............................................22
Saving fax options as a Shortcut...................................................................22
Electronic cover page ....................................................................................23
Destination Display........................................................................................25
Polling..................................................................................................................26
Polled transmit...............................................................................................26
4 Receiving a fax 28
Memory Receive Options ....................................................................................28
Fax Forwarding..............................................................................................28
Fax Storage...................................................................................................29
Changing Memory Receive Options..............................................................29
Turning off Remote Fax Options ...................................................................30
Remote retrieval ..................................................................................................31
Setting a Remote Access Code.....................................................................31
Using your Remote Access Code..................................................................31
Remote fax commands..................................................................................32
Retrieving fax messages ...............................................................................33
Changing the Fax Forwarding number..........................................................33
Additional receiving operations............................................................................34
Printing a reduced incoming fax ....................................................................34
2-sided printing for Fax mode .......................................................................34
Setting the Fax Receive Stamp.....................................................................35
Setting the Print Density................................................................................35
Printing a fax from the memory .....................................................................36
Out of Paper Reception.................................................................................36
Polling..................................................................................................................37
Polling receive ...............................................................................................37
v
5 Dialling and storing numbers 40
Telephone line services.......................................................................................40
BT Call Sign (U.K. only).................................................................................40
Additional dialling operations...............................................................................40
Combining Address Book numbers...............................................................40
Additional ways to store numbers........................................................................42
Storing Address Book numbers from Outgoing Calls....................................42
Setting up Groups for Broadcasting ..............................................................42
6 Printing reports 45
Fax reports...........................................................................................................45
Transmission Verification Report...................................................................45
Fax Journal (Activity Report) .........................................................................45
Reports ................................................................................................................46
How to print a report......................................................................................46
7 Making copies 47
Copy settings.......................................................................................................47
Stop copying..................................................................................................47
Improving copy quality...................................................................................47
Enlarging or reducing copies .........................................................................48
2-sided Copying ............................................................................................49
Adjusting Density and Contrast .....................................................................51
Sorting copies................................................................................................52
Making N in 1 copies (page layout) ...............................................................52
2 in 1 ID Copy................................................................................................54
Adjusting the Colour Saturation.....................................................................55
Making 2-sided N in 1 copies (MFC-9340CDW) ...........................................55
Removing Background Colour.......................................................................56
Saving copy options as a Shortcut ................................................................57
Saving paper .................................................................................................57
A Routine maintenance 58
Checking the machine.........................................................................................58
Printing the test print......................................................................................58
Checking the Page Counters.........................................................................58
Checking the remaining life of toner cartridges .............................................58
Checking the remaining life of parts ..............................................................58
Replacing periodic maintenance parts.................................................................59
Packing and shipping the machine......................................................................60
B Glossary 62
C Index 66
1
1
1
NOTE
Most of the illustrations in this User’s
Guide show the MFC-9340CDW.
Memory storage 1
Your menu settings are stored permanently,
and in the event of a power failure will not be
lost. Temporary settings (for example,
Contrast and Overseas Mode) will be lost.
Also, during a power failure the machine will
retain the date and time and programmed fax
timer jobs (for example, Delayed Fax) for up
to 60 hours. Other fax jobs in the machine’s
memory will not be lost.
Automatic Daylight
Saving Time
1
You can set the machine to change
automatically for Daylight Saving Time. It will
set itself forward one hour in the spring, and
back one hour in the autumn.
a Press .
b Press (Date & Time).
c Press Auto Daylight.
d Press On or Off.
e Press .
General Setup 1
Chapter 1
2
Ecology features 1
Toner Save 1
You can save toner using this feature. When
you set Toner Save to On, print appears
lighter. The factory setting is Off.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Ecology.
f Press Ecology.
g Press Toner Save.
h Press On or Off.
i Press .
NOTE
We do not recommend Toner Save for
printing Photo or Greyscale images.
Sleep Time 1
The Sleep Time setting can reduce power
consumption. When the machine is in Sleep
mode (Power Save mode) it acts as though it
is turned off. The machine will wake up and
start printing when it receives a print job.
You can choose how long the machine must
be idle before it goes into Sleep mode. The
timer will restart if any operation is carried out
on the machine, such as receiving a fax or a
print job. The factory setting is three minutes.
When the machine goes into Sleep mode, the
Touchscreen backlight turns off.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Ecology.
f Press Ecology.
g Press Sleep Time.
h Using the keyboard on the
Touchscreen, enter the length of time
(0-50 minutes) the machine will remain
idle before entering Sleep mode.
Press OK.
i Press .
General Setup
3
1
Deep Sleep mode 1
If the machine is in Sleep mode and does not
receive any jobs for a certain length of time,
the machine will go into Deep Sleep mode
automatically. Deep Sleep mode uses less
power than Sleep mode. The machine will
wake up when it receives a job or if you press
the Touchscreen.
When the machine is in Deep Sleep mode,
the Touchscreen backlight turns off and
blinks.
Touchscreen 1
Setting the backlight
brightness 1
You can adjust the brightness of the
Touchscreen LCD backlight. If you are having
difficulty reading the Touchscreen, try
changing the brightness setting.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display LCD Settings.
f Press LCD Settings.
g Press Backlight.
h Press Light, Med or Dark.
i Press .
Chapter 1
4
Setting the Dim Timer for the
backlight 1
You can set how long the Touchscreen LCD
backlight stays on after you go back to your
Home screen.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display LCD Settings.
f Press LCD Settings.
g Press Dim Timer.
h Press Off, 10Secs, 20Secs or
30Secs.
i Press .
5
2
2
Secure Function Lock 2.0
2
Secure Function Lock lets you restrict Public
access to the following machine functions:
Fax Tx (Fax Sending)
Fax Rx (Fax Receiving)
Copy
Scan
1
USB Direct Print
3
Print
2
Web Connect (Upload)
Web Connect (Download)
Color Print
24
Page Limit
4
1
Scan includes scan jobs via Brother iPrint&Scan.
2
Print and Color Print include print jobs via AirPrint,
Google Cloud Print and Brother iPrint&Scan.
3
For MFC-9330CDW and MFC-9340CDW
4
Available for Print, USB Direct Print, Copy and
Web Connect (Download).
This feature also prevents users from
changing the default settings of the machine
by limiting access to the Menu settings.
Before using the security features you must
first enter an administrator password.
The administrator can set up restrictions for
individual users along with a user password.
Make a careful note of your password. If you
forget it, you will have to reset the password
stored in the machine. For information about
how to reset the password, contact Brother
customer service.
NOTE
• Secure Function Lock can be set manually
from the Touchscreen, or by using Web
Based Management or BRAdmin
Professional 3 (Windows
®
only). We
recommend using Web Based
Management or BRAdmin Professional 3
(Windows
®
only) to configure this feature
(see Network User's Guide).
• Only administrators can set limitations
and make changes for each user.
• Polling Receive is enabled only when both
Fax Tx and Fax Rx are enabled.
Security features 2
Chapter 2
6
Before you begin to use
Secure Function Lock 2.0 2
You can configure the Secure Function Lock
2.0 settings using a web browser. Before
configuration, the following preparations are
needed.
a Start your web browser.
b Type “vmachine’s IP address/” into
your browser’s address bar (where
“machine’s IP address” is the IP address
of the Brother machine).
For example:
v192.168.1.2/
NOTE
You can find the machine’s IP address in
the Network Configuration List (see
Network User's Guide: Printing the
Network Configuration Report).
c Type a password in the Login box. (This
is a password to log on to the machine’s
web page, not the administrator
password for Secure Function Lock.)
Click .
NOTE
If you are using a web browser to
configure the machine’s settings for the
first time, set a password.
1Click
Please configure the password.
2 Type a password (up to 32 characters).
3 Retype the password in the
Confirm New Password field.
4Click Submit.
Setting and changing the
Administrator Password 2
You can configure these settings using a web
browser. To set up the web page, see Before
you begin to use Secure Function Lock 2.0
on page 6. Then set up the administrator.
Setting the administrator password 2
The administrator password is used to set up
users and to turn Secure Function Lock on or
off (see Setting up restricted users on page 7
and Turning Secure Function Lock on/off
on page 8).
a Click Administrator.
b Click Secure Function Lock.
c Type a four-digit number for the
password in the New Password field.
d Retype the password in the
Retype Password field.
e Click Submit.
Changing the administrator password2
a Click Administrator.
b Click Secure Function Lock.
c Type a four-digit number for the
password in the New Password field.
d Retype the password in the
Retype Password field.
e Click Submit.
Security features
7
2
Setting up restricted users 2
You can set up users with restrictions and a
password. You can set up to 25 restricted
users.
You can configure these settings using a web
browser. To set up the web page, see Before
you begin to use Secure Function Lock 2.0
on page 6. Then follow these steps:
a Click Administrator.
b Click Secure Function Lock.
c Type an alphanumeric Group name or
User name (up to 15 characters) in the
ID Number/Name field and then type a
four-digit password in the PIN field.
d Clear the functions that you want to
restrict in the Print check box and
Others check box. To configure the
maximum page count, select the On
check box in Page Limit, and then type
the number in the Max. field.
e Click Submit.
Setting up and changing the
Public user mode 2
Public user mode restricts the functions that
are available for all users who do not have a
password.
When you set up restrictions for Public users,
you must do it through Web Based
Management or BRAdmin Professional 3
(Windows
®
only) (see
Network User's Guide).
a Click Administrator.
b Click Secure Function Lock.
c Clear the functions that you want to
restrict in the Print check box and
Others check box. To configure the
maximum page count, select the On
check box in Page Limit, and then type
the number in the Max. field.
d Click Submit.
Chapter 2
8
Turning Secure Function
Lock on/off 2
NOTE
Make a careful note of the administrator
password. If you enter the wrong
password, the Touchscreen will show
Wrong Password. Enter the correct
password. If you forget it, contact Brother
customer service.
Turning Secure Function Lock on 2
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Security.
f Press Security.
g Press Function Lock.
h Press Lock OffOn.
i Enter the registered four-digit
administrator password using the
keyboard on the Touchscreen.
Press OK.
NOTE
The Secure Function Lock icon is
displayed beneath the time and date.
Turning Secure Function Lock off 2
a Press or
.
(Where xxxxx is the user’s name.)
b Press Lock OnOff.
c Enter the registered four-digit
administrator password using the
keyboard on the Touchscreen.
Press OK.
Public
XXXXX
Security features
9
2
Switching Users 2
This setting allows you to switch between
registered restricted users or Public mode
when Secure Function Lock is turned on.
Changing to the restricted user mode2
a Press or
.
(Where xxxxx is the user’s name.)
b Press Change User.
c Swipe up or down, or press a or b to
display your user name.
d Press your user name.
e Enter your four-digit user password
using the keyboard on the Touchscreen.
Press OK.
NOTE
• If the current ID is restricted for the
function you want, Access Denied will
appear on the Touchscreen.
• If your ID has page limit restrictions and
has already reached the maximum
number of pages, the Touchscreen will
show Limit Exceeded or
Access Denied when you try to print.
Contact your administrator to check your
Secure Function Lock Settings.
Changing to the Public mode 2
a Press .
(Where xxxxx is the user’s name.)
b Press Go to Public.
NOTE
• After a restricted user has finished using
the machine, it will return to Public mode
after one minute.
• If the function you want is restricted for all
users, Access Denied will appear on
the Touchscreen and Change User
screen will appear. You cannot access the
function. Contact your administrator to
check your Secure Function Lock
Settings.
• If your ID has Color Print restrictions to
Disable, the Touchscreen will show
No Permission when you try to print
coloured data.
Public
XXXXX
XXXXX
Chapter 2
10
Setting Lock 2
Setting Lock lets you set a password to stop
other people from accidentally changing your
machine settings.
Make a careful note of your password. If you
forget it, you will have to reset the passwords
stored in the machine. Contact your
administrator or Brother customer service.
While the Setting Lock is On, you cannot
access the machine settings.
Machine settings cannot be changed through
the Remote Setup utility while Setting Lock
is On.
Setting up the administrator
password 2
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Security.
f Press Security.
g Press Setting Lock.
h Enter a four-digit number for the new
password using the keyboard on the
Touchscreen.
Press OK.
i Enter the new password again when the
Touchscreen shows Verify:.
Press OK.
j Press .
Security features
11
2
Changing the Setting Lock
administrator password 2
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Security.
f Press Security.
g Press Setting Lock.
h Press Set Password.
i Enter the old four-digit password using
the keyboard on the Touchscreen.
Press OK.
j Enter a four-digit number for the new
password using the keyboard on the
Touchscreen.
Press OK.
k Re-enter the new password again when
the Touchscreen shows Verify:.
Press OK.
l Press .
Turning Setting Lock on/off 2
If you enter the wrong password, the
Touchscreen will show Wrong Password.
Enter the correct password.
Turning Setting Lock on 2
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display General Setup.
d Press General Setup.
e Swipe up or down, or press a or b to
display Security.
f Press Security.
g Press Setting Lock.
h Press Lock OffOn.
i Enter the registered four-digit
administrator password using the
keyboard on the Touchscreen.
Press OK.
Turning Setting Lock off 2
a Press
on the Touchscreen.
b Enter the registered four-digit
administrator password using the
keyboard on the Touchscreen.
Press OK.
䣕䣧䣶䣶䣫䣰䣩䢢䣎䣱䣥䣭
Chapter 2
12
Dial Restriction 2
This feature is to prevent users from sending
a fax or call to a wrong number by mistake.
You can set the machine to restrict dialling
when you use the dial pad, Address Book and
Shortcuts.
If you choose Off, the machine does not
restrict the dialling method.
If you choose Enter # Twice, the machine
will prompt you to re-enter the number, and
then if you re-enter the same number
correctly, the machine will start dialling. If you
re-enter the wrong number, the Touchscreen
will show an error message.
If you choose On, the machine will restrict all
fax sending and outbound calls for that
dialling method.
Dial pad restriction 2
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Dial Restriction.
f Press Dial Restriction.
g Press Dial Pad.
h Press Enter # Twice, On or Off.
i Press .
Address Book restriction 2
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Dial Restriction.
f Press Dial Restriction.
g Press Address Book.
h Press Enter # Twice, On or Off.
i Press .
Shortcuts restriction 2
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Dial Restriction.
f Press Dial Restriction.
g Press Shortcuts.
h Press Enter # Twice, On or Off.
i Press .
13
3
3
Additional sending
options
3
Sending faxes using multiple
settings 3
Before you send a fax, you can change any
combination of these settings:
2-sided Fax
1
Contrast
Fax Resolution
Real Time TX
Overseas Mode
Delayed Fax
Batch TX
Coverpage Note
Coverpage Setup
Broadcasting
1
For MFC-9340CDW
a Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
The Touchscreen shows:
b Press Options.
c Swipe up or down, or press a or b to
display the setting you want, and then
press the setting.
d Press the option you want.
e Do one of the following:
Repeat steps c and d to change
more settings.
If you are finished choosing settings,
press OK. Go to the next step for
sending your fax.
NOTE
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as the
default settings. These settings will stay
until you change them again (see Setting
your changes as the new default
on page 21).
• You can also save some of the settings
you use most often by setting them as a
Shortcut (see Saving fax options as a
Shortcut on page 22).
Sending a fax 3
Chapter 3
14
Changing a 2-sided fax layout
(MFC-9340CDW) 3
You must choose a 2-sided scanning format
before you send a 2-sided fax. The format
you choose will depend on the layout of your
2-sided document.
a Load your document in the ADF.
b Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display 2-sided Fax.
e Press 2-sided Fax.
f Do one of the following:
If your document is flipped on the
Long edge, press 2-sided Scan:
Long Edge.
If your document is flipped on the
Short edge, press 2-sided Scan:
Short Edge.
Long edge
Portrait Landscape
Short edge
Portrait Landscape
Sending a fax
15
3
Contrast 3
For most documents the default setting of
Auto will give the best results.
Auto automatically chooses the appropriate
contrast for your document.
If your document is very light or very dark,
changing the contrast may improve the
quality of the fax.
Select Dark to make the faxed document
lighter.
Select Light to make the faxed document
darker.
a Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b Press Options.
c Swipe up or down, or press a or b to
display Contrast.
d Press Contrast.
e Press Auto, Light or Dark.
NOTE
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting if you choose Photo as the Fax
Resolution.
Changing Fax Resolution 3
The quality of a fax can be improved by
changing the Fax Resolution. Resolution can
be changed for the next fax.
a Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b Press Options.
c Swipe up or down, or press a or b to
display Fax Resolution.
d Press Fax Resolution.
e Press Standard, Fine, S.Fine or
Photo.
NOTE
You can choose four different resolution
settings.
Black & white
Standard Appropriate for most typed
documents.
Fine Good for small print and
transmits a little slower than
Standard resolution.
S.Fine Good for small print or artwork
and transmits slower than Fine
resolution.
Photo Use when the document has
varying shades of grey or is a
photograph. This has the
slowest transmission time.
Chapter 3
16
Additional sending
operations 3
Sending a fax manually 3
Manual transmission 3
Manual transmission lets you hear the
dialling, ringing and fax-receiving tones while
sending a fax.
a Load your document.
b Pick up the handset of an external
telephone and listen for a dial tone.
c Dial the fax number using the external
telephone.
d When you hear the fax tones, press
Fax Start.
If you are using the scanner glass,
press Send.
e Replace the handset of an external
telephone.
Dual access 3
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing computer data. The Touchscreen will
show the new job number.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
NOTE
If you get an Out of Memory message
while scanning the first page of a fax,
press to cancel scanning. If you get an
Out of Memory message while
scanning a subsequent page, you can
press Send Now to send the pages
scanned so far, or press to cancel the
operation.
Sending a fax
17
3
Broadcasting 3
Broadcasting lets you send the same fax
message to more than one fax number. You
can include Groups, Address Book numbers
and up to 50 manually dialled numbers in the
same broadcast.
You can broadcast up to 250 different
numbers.
Before you begin the broadcast 3
Address Book numbers must be stored in the
machine’s memory before they can be used
in a broadcast (see Basic User's Guide:
Storing Address Book numbers).
Group numbers must also be stored in the
machine’s memory before they can be used
in a broadcast. Group numbers include many
stored Address Book numbers for easier
dialling (see Setting up Groups for
Broadcasting on page 42).
How to broadcast a fax 3
a Load your document.
b Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display Broadcasting.
e Press Broadcasting.
f Press Add Number.
NOTE
If you downloaded Internet Fax:
If you want to broadcast using an E-mail
address, press , enter the E-mail
address (see Basic User's Guide:
Entering text), and press OK.
g You can add numbers to the broadcast
in the following ways:
Press Add Number and enter a
number using the keyboard on the
Touchscreen (see
Basic User's Guide: How to dial).
Press OK.
Press Add from Address book.
Swipe up or down, or press a or b to
display the number you want to add
to the broadcast. Select the check
boxes of the numbers you want to
add to the broadcast. After you select
all the numbers you want, press OK.
Press
Search in Address book
.
Press the first letter of the name and
press
OK
. Press the name, and then
press the number you want to add.
Chapter 3
18
h After you enter all the fax numbers by
repeating steps f and g, press OK.
i Press Fax Start.
After the broadcast is finished, the
machine will print a broadcast report to
let you know the results.
NOTE
• If you did not use up any of the numbers
for Groups, you can broadcast faxes to as
many as 250 different numbers.
• The machine’s available memory will vary
depending on the types of jobs in the
memory and the numbers used for
broadcasting. If you broadcast to the
maximum number available, you will not
be able to use dual access and delayed
fax.
• If the Out of Memory message
appears, press to stop the job. If more
than one page has been scanned, press
Send Now to send the portion that is in
the machine’s memory.
Cancelling a Broadcast in progress 3
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
a Press .
b Do one of the following:
To cancel the entire broadcast, press
Entire Broadcast. Go to step c.
To cancel the current job, press the
button that displays the number or
name being dialled. Go to step d.
To exit without cancelling, press .
c When the Touchscreen asks if you want
to cancel the entire broadcast, do one of
the following:
Press Yes to confirm.
To exit without cancelling, press No.
d Do one of the following:
To cancel the current job, press Yes.
To exit without cancelling, press No.
Sending a fax
19
3
Real Time Transmission 3
When you are sending a fax, the machine will
scan the document into the memory before
sending it. As soon as the telephone line is
free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately without
waiting for memory transmission. You can
turn on Real Time TX.
NOTE
• If the memory is full and you are sending a
fax from the ADF, the machine will send
the document in real time (even if
Real Time TX is set to Off). If the
memory is full, faxes from the scanner
glass cannot be sent until you clear some
of the memory.
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
a Load your document.
b Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display Real Time TX.
e Press Real Time TX.
f Press On (or Off).
g Press OK.
h Enter the fax number.
i Press Fax Start.
Overseas Mode 3
If you are having difficulty sending a fax
overseas due to a bad connection, then
turning on Overseas Mode may help.
This is a temporary setting, and will only be
active for your next fax.
a Load your document.
b Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display Overseas Mode.
e Press Overseas Mode.
f Press On.
g Press OK.
h Enter the fax number.
i Press Fax Start.
Chapter 3
20
Delayed Fax 3
You can store up to 50 faxes in the memory
to be sent within a twenty-four hour period.
a Load your document.
b Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display Delayed Fax.
e Press Delayed Fax.
f Press Delayed Fax.
g Press On.
h Press Set Time.
i Enter the time you want the fax to be
sent (in 24-hour format) using the
keyboard on the Touchscreen.
Press OK.
NOTE
The number of pages you can scan into
the memory depends on the amount of
data printed on each page.
Delayed batch transmission 3
Before sending the delayed faxes, your
machine will help you economize by sorting
all the faxes in the memory by destination and
scheduled time.
All delayed faxes that are scheduled to be
sent at the same time to the same fax number
will be sent as one fax to save transmission
time.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Send.
f Press Setup Send.
g Press Batch TX.
h Press On or Off.
i Press .
Sending a fax
21
3
Checking and cancelling
waiting jobs 3
Check which jobs are still waiting in the
memory to be sent. If there are no jobs, the
Touchscreen will show No Jobs Waiting.
You can cancel a fax job that is stored and
waiting in the memory.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Remaining Jobs.
f Press Remaining Jobs.
Jobs that are waiting will appear on the
Touchscreen.
g Swipe up or down, or press a or b to
scroll through the waiting jobs and press
the job you want to cancel.
h Press Cancel.
i Do one of the following:
To cancel, press Yes. If you want to
cancel another job go to step g.
To exit without cancelling, press No.
j When you have finished cancelling jobs,
press .
Setting your changes as the
new default 3
You can save the fax settings for
Fax Resolution, Contrast,
Glass Scan Size, Real Time TX and
Coverpage Setup you use most often by
setting them as the default. These settings
will stay until you change them again.
a Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b Press Options.
c Swipe up or down, or press a or b to
choose the setting you want to change,
and then press the new option.
Repeat this step for each setting you
want to change.
d After changing the last setting, swipe up
or down, or press a or b to display Set
New Default.
e Press Set New Default.
f The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
g Press .
Chapter 3
22
Restoring all fax settings to
the factory settings 3
You can restore all the fax settings you have
changed to the factory settings. These
settings will stay until you change them again.
a Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b Press Options.
c After changing the last setting, swipe up
or down, or press a or b to display
Factory Reset.
d Press Factory Reset.
e The Touchscreen asks you to confirm to
change back to the factory settings.
Press Yes to confirm.
f Press .
Saving fax options as a
Shortcut 3
You can store all the new fax options you use
frequently by saving them as a Shortcut.
a Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b Enter the fax number.
c Press Options.
d Swipe up or down, or press a or b to
display Fax Resolution,
2-sided Fax
1
, Contrast,
Real Time TX, Coverpage Setup,
Overseas Mode or
Glass Scan Size, and then press the
setting you want to change. Then press
the new option you want.
Repeat this step for each setting you
want to change.
e When you have finished choosing new
options, press OK.
f Press Save as Shortcut.
g Confirm the displayed list of options you
chose for the Shortcut, and then
press OK.
h Enter a name for the Shortcut using the
keyboard on the Touchscreen. (To help
you enter letters, see
Basic User's Guide: Entering text.)
Press OK.
i Press OK to confirm.
1
For MFC-9340CDW
Sending a fax
23
3
Electronic cover page 3
You will need to have programmed your
Station ID in order to use this feature (see
Quick Setup Guide).
You can automatically send a cover page
with every fax. Your cover page includes your
Station ID, a comment, and the name stored
in the Address Book.
You can choose one of the following preset
comments:
1.Comment Off
2.Please Call
3.Urgent
4.Confidential
Instead of using one of the preset comments,
you can enter two personal messages of your
own, up to 27 characters long.
(See Composing your own comments
on page 23.)
5.(User Defined)
6.(User Defined)
Composing your own comments 3
You can set up two comments of your own.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Send.
f Press Setup Send.
g Press Coverpage Setting.
h Press Coverpage Note.
i Press 5. or 6. to store your own
comment.
j Enter your own comment using the
keyboard on the Touchscreen.
Press OK.
Press to choose numbers,
letters or special characters (see
Basic User's Guide: Entering text).
k Press .
Chapter 3
24
Send a cover page for the next fax 3
If you want to send a cover page for the next
fax, you can add the cover page.
a Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b Press Options.
c Swipe up or down, or press a or b to
display Coverpage Setup.
d Press Coverpage Setup.
e Press Coverpage Setup.
f Press On.
g Press Coverpage Note.
h Swipe up or down, or press a or b to
choose the comment you want to use,
and then press the comment.
Press .
i Press OK.
j Enter the fax number.
k Press Fax Start.
Using a printed cover page 3
If you want a printed cover page you can write
on, print the sample page and attach it to your
fax.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Send.
f Press Setup Send.
g Press Coverpage Setting.
h Press Print Sample.
i Press OK.
Sending a fax
25
3
Destination Display 3
When you send a fax, the machine displays
the information from the Address Book or the
number you dialled. You can set the machine
to hide the destination information on the
Touchscreen.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Send.
f Press Setup Send.
g Press Destination.
h Press Hidden or Display.
i Press .
Chapter 3
26
Polling 3
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polled transmit 3
Polled transmit lets you set up your machine
to wait with a document so another fax
machine can call and retrieve it.
The document will be stored and can be
retrieved by any other fax machine until you
delete it from the memory.
Setup for polled transmit 3
a Load your document.
b Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display Polled TX.
e Press Polled TX.
f Press Standard.
g Press Fax Start.
If you are using the ADF, go to step j.
h If you are using the scanner glass, the
Touchscreen will prompt you to choose
one of the following options:
Press Yes to scan another page.
Go to step i.
Press No if you are finished scanning
pages. Go to step j.
i Place the next page on the scanner
glass and press OK.
Repeat steps h and i for each
additional page.
j Your machine will automatically send
the fax when it is polled. Afterwards
POLLED REPORT will be printed.
NOTE
To delete the fax from memory, press
, All Settings, Fax,
Remaining Jobs (see Checking and
cancelling waiting jobs on page 21).
Setup for polled transmit with a secure
code 3
Secure polling lets you restrict who can get
the documents you set up to be polled.
Secure polling only works with Brother fax
machines. If another person wants to retrieve
a fax from your machine they will have to
enter the secure code.
a Load your document.
b Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
c Press Options.
d Swipe up or down, or press a or b to
display Polled TX.
Sending a fax
27
3
e Press Polled TX.
f Press Secure.
g Enter a four-digit number.
Press OK.
h Press Fax Start.
i If you are using the scanner glass, the
Touchscreen will prompt you to choose
one of the following options:
Press Yes to scan another page. Go
to step j.
Press No if you are finished scanning
pages.
j Place the next page on the scanner
glass and press OK. Repeat
steps i and j for each additional
page.
k Your machine will automatically send
the fax when it is polled.
28
4
Memory Receive
Options
4
Memory Receive lets you receive faxes while
you are away from the machine.
You can use only one Memory Receive
option at a time:
Fax Forwarding
Fax Storage
PC-Fax Receive
(See Basic User's Guide:
PC-Fax Receive.)
Off
Fax Forwarding 4
The Fax Forwarding feature lets you
automatically forward your received faxes to
another machine. If you choose
Backup Print: On, the machine will also
print the fax.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Memory Receive.
h Press Memory Receive.
i Press Fax Forward.
j Do one of the following:
Press Manual to enter the
forwarding fax number (up to 20
characters) using the keyboard on
the Touchscreen (see
Basic User's Guide: Entering text).
Press OK.
Press Address Book.
Swipe up or down, or press a or b to
display to scroll until you find the fax
number you want your faxes to be
forwarded to.
Press the fax number or E-mail
address you want.
NOTE
• You can enter an E-mail address by
pressing on the Touchscreen.
• If you choose a Group number from the
Address Book, the faxes will be forwarded
to multiple fax numbers.
k If Fax Preview is set to Off, press
Backup Print: On or
Backup Print: Off.
IMPORTANT
• If you choose Backup Print: On, the
machine will also print received faxes at
your machine so you will have a copy.
• When Fax Preview is set to On, the
backup print feature does not work.
l Press .
Receiving a fax 4
Receiving a fax
29
4
Fax Storage 4
The Fax Storage feature lets you store your
received faxes in the machine’s memory. You
can retrieve stored fax messages from a fax
machine at another location using the remote
retrieval commands (see Retrieving fax
messages on page 33).
Your machine will print a backup copy of each
stored fax.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Memory Receive.
h Press Memory Receive.
i Press Fax Storage.
j Press .
Changing Memory Receive
Options 4
If received faxes are in your machine’s
memory when you change the Memory
Receive operations, the Touchscreen will ask
you one of the following questions:
If received faxes have already been
printed 4
Erase all documents?
• If you press Yes, faxes in the memory
will be erased before the setting
changes.
• If you press No, faxes in the memory
will not be erased and the setting will
be unchanged.
If unprinted faxes are in the memory 4
Print all faxes?
• If you press Yes, faxes in the memory
will be printed before the setting
changes. If a backup copy has already
been printed, it will not be printed
again.
• If you press No, faxes in the memory
will not be printed and the setting will
be unchanged.
If received faxes are left in the machine’s
memory when you change to
PC Fax Receive from another option
(Fax Forward or Fax Storage), press
USB or the name of the computer if you are on
a network.
Press OK.
Chapter 4
30
The Touchscreen will ask you this question:
Send Fax to PC?
• If you press Yes, faxes in the memory
will be sent to your computer before
the setting changes. You will be asked
if you want to turn on Backup Print.
(For more information, see
Basic User's Guide: PC-Fax Receive.)
• If you press No, faxes in the memory
will not be erased or transferred to your
computer and the setting will be
unchanged.
IMPORTANT
If you choose Backup Print On, the
machine will also print received faxes at
your machine so you will have a copy.
This is a safety feature in case there is a
power failure before the fax is forwarded
or a problem at the receiving machine.
Turning off Remote Fax
Options 4
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Memory Receive.
h Press Memory Receive.
i Press Off.
NOTE
The Touchscreen will give you more
options if there are received faxes still in
your machine’s memory (see Changing
Memory Receive Options on page 29).
j Press .
Receiving a fax
31
4
Remote retrieval 4
You can call your machine from any touch-
tone phone or fax machine and then use the
remote access code and remote commands
to retrieve fax messages.
Setting a Remote Access
Code 4
The Remote Access Code lets you access
the remote retrieval features when you are
away from your machine. Before you can use
the remote access and retrieval features, you
must set up your own code. The factory
default code is the inactive code (– – –l).
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Remote Access.
f Press Remote Access.
g Enter a three-digit code using the
numbers 0 to 9, * or # using the
keyboard on the Touchscreen.
Press OK.
NOTE
DO NOT use the same code used for your
Remote Activation code (l51) or Remote
Deactivation code (#51) (see
Basic User's Guide: Using Remote
Codes).
h Press .
NOTE
You can change your code at any time. To
make your code inactive, press and hold
at step g to restore the default setting
–––l, and then press OK.
Using your Remote Access
Code 4
a Dial your fax number from a telephone
or another fax machine using touch tone
dialling.
b When your machine answers,
immediately enter your Remote Access
Code .
c The machine signals if it has received
messages:
1 long beep -- Fax messages
No beeps -- No messages
d When the machine gives two short
beeps, enter a command (see Remote
fax commands on page 32). The
machine will hang up if you wait longer
than 30 seconds to enter a command.
The machine will beep three times if you
enter an invalid command.
e Press 9 0 to reset the machine when you
are finished.
f Hang up.
NOTE
• If your machine is set to Manual mode
and you want to use the remote retrieval
features, wait for about 100 seconds after
it starts ringing, and then enter the remote
access code within 30 seconds.
• This function may not be available in some
countries or supported by your local
telephone company.
Chapter 4
32
Remote fax commands 4
Follow the commands in the table to access features when you are away from the machine. When
you call the machine and enter your remote access code (3 digits followed by l), the system will
give two short beeps and you must enter a remote command.
Remote commands Operation details
95 Change the Fax Forwarding or
Fax Storage Settings
1 OFF You can choose Off after you have retrieved or erased all your
messages.
2 Fax Forwarding One long beep means the change is accepted. If you hear three
short beeps, you cannot make changes because the conditions
have not been met (for example, registering a fax forwarding
number). You can register the maximum number of rings (see
Changing the Fax Forwarding number on page 33). When you
have registered the number, fax forwarding will work.
4 Fax Forwarding number
6 Fax Storage
96 Retrieve a fax
2 Retrieve all faxes Enter the number of a remote fax machine to receive stored fax
messages (see Retrieving fax messages on page 33).
3 Erase faxes from the memory If you hear one long beep, fax messages have been erased
from the memory.
97 Check the receiving status
1 Fax You can check whether your machine has received any faxes.
If yes, you will hear one long beep. If no, you will hear three
short beeps.
98 Change the Receive Mode
1 External TAD If you hear one long beep, your change has been accepted.
2 Fax/Tel
3 Fax Only
90 Exit Press 90 to stop remote retrieval. Wait for the long beep, then
replace the handset.
Receiving a fax
33
4
Retrieving fax messages 4
You can call your machine from any touch-
tone telephone or fax machine and have your
fax messages sent to another machine.
Before you use this feature, you have to turn
on Fax Storage or Fax Preview (see Fax
Storage on page 29 or Basic User's Guide:
Fax Preview (Black and White only)).
a Dial your fax number.
b When your machine answers, enter
your Remote Access Code (3 digits
followed by l). If you hear one long
beep, you have messages.
c When you hear two short beeps,
press 9 6 2.
d Wait for a long beep, and then use the
dial pad to enter the number of the
remote fax machine where you want
your fax messages sent, followed by ##
(up to 20 digits).
NOTE
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e Hang up after you hear your machine
beep. Your machine will call the other
fax machine, which will then print your
fax messages.
Changing the Fax Forwarding
number 4
You can change your fax forwarding number
from another touch-tone telephone or fax
machine.
a Dial your fax number.
b When your machine answers, enter
your Remote Access Code (3 digits
followed by l). If you hear one long
beep, you have messages.
c When you hear two short beeps,
press 9 5 4.
d Wait for the long beep, enter the new
number (up to 20 digits) of the remote
fax machine you want your fax
messages forwarded to using the dial
pad, then enter ##.
NOTE
You cannot use l and # as dial numbers.
However, press # if you want to create a
pause.
e Press 9 0 to stop Remote Access when
you have finished.
f Hang up after you hear your machine
beep.
Chapter 4
34
Additional receiving
operations 4
Printing a reduced incoming
fax 4
If you choose On, the machine reduces each
page of an incoming fax to fit on one page of
A4, Letter, Legal or Folio sized paper.
The machine calculates the reduction ratio by
using the page size of the fax and your Paper
Size settings (see Basic User's Guide: Paper
settings).
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Auto Reduction.
h Press Auto Reduction.
i Press On or Off.
j Press .
2-sided printing for Fax mode 4
Your machine prints received faxes on both
sides of the paper when 2-sided is set to
On.
Use A4 sized paper for this function (60 to
105 g/m
2
).
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display 2-sided.
h Press 2-sided.
i Press On or Off.
j Press .
NOTE
When 2-sided is turned on, incoming
faxes will automatically be reduced to fit
the size of paper in the paper tray.
Receiving a fax
35
4
Setting the Fax Receive
Stamp 4
You can set the machine to print the received
date and time at the top centre of each
received fax page.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Fax Rx Stamp.
h Press Fax Rx Stamp.
i Press On or Off.
j Press .
NOTE
• Make sure you have set the current date
and time on the machine (see
Quick Setup Guide).
• If you downloaded Internet Fax:
The received time and date will not appear
when using Internet Fax.
Setting the Print Density 4
You can adjust the Print Density setting to
make your printed pages darker or lighter.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Setup Receive.
f Press Setup Receive.
g Swipe up or down, or press a or b to
display Print Density.
h Press Print Density.
i Press a density level on the
Touchscreen.
j Press .
Chapter 4
36
Printing a fax from the
memory 4
If you choose Fax Storage, you can still
print a fax from the memory when you are at
your machine (see Fax Storage on page 29).
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Press a or b to display
Print Document.
f Press Print Document.
g Press OK.
h Press .
Out of Paper Reception 4
As soon as the paper tray becomes empty
during fax reception, the Touchscreen shows
No Paper. Load paper in the paper tray (see
Basic User's Guide: Loading paper and print
media).
Incoming faxes will continue to be stored in
the memory until the memory becomes full or
paper is loaded in the paper tray. When the
memory is full the machine will stop
automatically answering calls. To print the
faxes, load fresh paper in the tray.
Receiving a fax
37
4
Polling 4
Polling lets you set up your machine so other
people can receive faxes from you, but they
pay for the call. It also lets you call somebody
else’s fax machine and receive a fax from it,
so you pay for the call. The polling feature
needs to be set up on both machines for this
to work. Not all fax machines support polling.
Polling receive 4
Polling receive lets you call another fax
machine to receive a fax.
a Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b Press Options.
c Swipe up or down, or press a or b to
display Polling RX.
d Press Polling RX.
e Press Standard.
f Enter the fax number you are polling
using Address Book or the dial pad on
the Touchpanel.
g Press Fax Start.
Secure polling 4
Secure polling lets you restrict who can get
the documents you set up to be polled.
Secure polling only works with Brother fax
machines. If you want to get a fax from a
secured Brother machine you have to enter
the secure code.
a Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b Press Options.
c Swipe up or down, or press a or b to
display Polling RX.
d Press Polling RX.
e Press Secure.
f Enter a four-digit number.
Press OK.
g Enter the fax number you are polling
using Address Book or the dial pad on
the Touchpanel.
h Press Fax Start.
Chapter 4
38
Delayed polling 4
Delayed polling lets you set the machine to
begin polling receive at a later time. You can
only set up one delayed polling operation.
a Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b Press Options.
c Swipe up or down, or press a or b to
display Polling RX.
d Press Polling RX.
e Press Timer.
f Enter the time (in 24-hour format) you
want to begin polling.
Press OK.
g Enter the fax number you are polling
using Address Book or the dial pad on
the Touchpanel.
h Press Fax Start.
Sequential polling 4
Sequential polling lets you request
documents from several fax machines in one
operation.
a Do one of the following:
When Fax Preview is set to Off,
press (Fax).
When Fax Preview is set to On, press
(Fax) and Sending Faxes.
b Press Options.
c Swipe up or down, or press a or b to
display Polling RX.
d Press Polling RX.
e Press Standard, Secure or Timer.
f Choose one of the options below.
If you chose Standard, go to
step g.
If you chose Secure, enter a
four-digit number, press OK. Go to
step g.
If you chose Timer, enter the time
you want to begin polling (in
24-hours format) and press OK. Go to
step g.
g Press Options.
h Swipe up or down, or press a or b to
display Broadcasting.
i Press Broadcasting.
j Press Add Number.
Receiving a fax
39
4
k You can add numbers to the broadcast
in the following ways:
Press Add Number and enter a
number using the keyboard on the
Touchscreen.
Press OK.
Press Add from Address book.
Swipe up or down, or press a or b to
display the numbers you want to add
to the broadcast. Press the check
boxes to add a check mark beside all
the numbers you want, and then
press OK.
Press
Search in Address book
.
Enter the name and press
OK
. Press
the name, and then number you want
to add.
l Repeat steps j and k for each number
you want.
Press OK.
m Press Fax Start.
The machine polls each number or
Group number in turn for a document.
Stop Polling 4
To cancel the polling process, press while
the machine is dialling.
To cancel all sequential polling receive jobs,
see Cancelling a Sequential Polling Job
on page 39.
Cancelling a Sequential Polling Job 4
a Press .
b Do one of the following:
To cancel the entire sequential
polling job, press
Entire Seq. Poll. Go to step c.
To cancel the current job, press the
button that displays the number or
name being dialled. Go to step d.
To exit without cancelling, press .
c When the Touchscreen asks if you want
to cancel the entire sequential polling
job, do one of the following:
Press Yes to confirm.
To exit without cancelling, press No.
d Do one of the following:
To cancel the current job, press Yes.
To exit without cancelling, press No.
40
5
Telephone line
services
5
BT Call Sign (U.K. only) 5
The BT Call Sign subscriber service is a way
to have a separate number for your machine;
it allows you to have at least two separate
telephone numbers on one phone line. Each
phone number has its own distinctive ringing
pattern.
You can set up your machine so that it only
responds to the second number.
When you set the BT Call Sign feature to ON,
the receive mode is set to Manual
automatically. Manual mode will not respond
to incoming telephone calls since the number
you use for telephone calls will use the
normal ring pattern. If you turn the feature off,
your receive mode will remain on Manual.
To enable the machine to work with BT
Call Sign 5
This feature works with your external phone.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Miscellaneous.
f Press Miscellaneous.
g Press BT Call Sign.
h Press On or Off.
i Press .
Additional dialling
operations
5
Combining Address Book
numbers 5
Sometimes you may want to choose from
several long-distance carriers when you send
a fax. Rates may vary depending on the time
and destination. To take advantage of low
rates, you can store the access codes of long-
distance carriers and credit card numbers as
Address Book numbers. You can store these
long dialling sequences by dividing them and
setting them up as separate Address Book
numbers in any combination. You can even
include manual dialling using the dial pad
(see Basic User's Guide: Storing numbers).
For example, you might have stored ‘01632’
in Address Book: Brother 1 and ‘960555’ in
Address Book: Brother 2. You can use them
both to dial ‘01632-960555’ if you press the
following:
a Press (Fax).
b Press Address Book.
c Swipe up or down, or press a or b to
display the number of Brother 1.
d Press the number.
e Press Apply.
f Press Address Book.
g Swipe up or down, or press a or b to
display the number of Brother 2.
h Press the number.
i Press Apply.
Dialling and storing numbers 5
Dialling and storing numbers
41
5
j Press Fax Start. You will dial
‘01632-960555’.
To temporarily change a number, you can
substitute part of the number by pressing it on
the dial pad. For example, to change the
number to ‘01632-960556’, you could enter
the number (Brother 1: 01632) using Address
Book, press Apply and then press 960556
on the dial pad.
NOTE
If you must wait for another dial tone or
signal at any point in the dialling
sequence, create a pause in the number
by pressing
Pause
. Each key press adds
a 2.8-second delay. You can press Pause
as many times as needed to increase the
length of the pause.
Chapter 5
42
Additional ways to
store numbers 5
Storing Address Book
numbers from Outgoing Calls5
You can store Address Book numbers from
the Outgoing Call history.
a Press (Fax).
b Press Call History.
c Press Outgoing Call.
d Press the number.
e Press Edit.
f Press Add to Address Book.
g Press Name.
h Enter the name (up to 15 characters)
using the keyboard on the Touchscreen.
(To help you enter letters, see
Basic User's Guide: Entering text.)
Press OK.
i Press OK to confirm the fax or telephone
number.
j Press .
Setting up Groups for
Broadcasting 5
A Group, which can be stored in the Address
Book, allows you to send the same fax
message to many fax numbers by pressing
Fax, Address Book, Group name, Apply
and Fax Start.
First, you must store each fax number in
Address Book (see Basic User's Guide:
Storing Address Book numbers). Then you
can include them as numbers in the Group.
Each Group uses up an Address Book
number. You can store up to 20 Groups, or
you can assign up to 199 numbers to a large
Group.
(See Broadcasting on page 17.)
a Press (Fax).
b Press Address Book.
c Press Edit.
d Press Setup Groups.
e Press Name.
f Enter the Group name (up to 15
characters) using the keyboard on the
Touchscreen.
Press OK.
g Press Add/Delete.
h Add Address Book numbers to the
Group by pressing them to display a red
checkmark.
Press OK.
i Read and confirm the displayed list of
names and numbers you have chosen,
and then press OK to save your Group.
Dialling and storing numbers
43
5
j Do one of the following:
To store another Group for
broadcasting, repeat steps c - i.
To finish storing Groups for
broadcasting, press .
NOTE
You can print a list of all the Address Book
numbers (see Reports on page 46).
Changing a Group name 5
a Press (Fax).
b Press Address Book.
c Press Edit.
d Press Change.
e Swipe up or down, or press a or b to
display the Group you want.
f Press the Group name.
g Press the Name.
h Enter the new Group name (up to 15
characters) using the keyboard on the
Touchscreen.
Press OK.
NOTE
How to change the stored name:
To change a character, press d or c to
position the cursor to highlight the
incorrect character, and then press .
Enter the new character (see
Basic User's Guide: Entering text).
i Press OK.
j Press .
Deleting a Group 5
a Press (Fax).
b Press Address Book.
c Press Edit.
d Press Delete.
e Swipe up or down, or press a or b to
display the Group you want.
f Press the Group name.
Press OK.
g When the Touchscreen asks
Erase this data?, press Yes.
h Press .
Chapter 5
44
Adding or deleting Group members 5
a Press (Fax).
b Press Address Book.
c Press Edit.
d Press Change.
e Swipe up or down, or press a or b to
display the Group you want.
f Press the Group name.
g Swipe up or down, or press a or b to
display Add/Delete.
h Press Add/Delete.
i Swipe up or down, or press a or b to
display the number you want to add or
delete.
j Do the following for each number you
want to change:
To add a number to the Group, press
the check box of the number to add a
check mark.
To delete a number from the Group,
press the check box of the number to
remove the check mark.
k Press OK.
l Press OK.
m Press .
45
6
6
Fax reports 6
Press on the Touchscreen to set up the
Transmission Verification Report and the
Journal Period.
Transmission Verification
Report 6
You can use the Transmission Verification
Report as proof that you sent a fax (see
Basic User's Guide: Transmission
Verification Report).
Fax Journal (Activity Report) 6
You can set the machine to print a journal at
specific intervals (every 50 faxes, 6, 12 or 24
hours, 2 or 7 days).
The factory setting is Every 50 Faxes.
If you set the interval to Off, you can still print
the report by following the procedure in
Reports on page 46.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Fax.
d Press Fax.
e Swipe up or down, or press a or b to
display Report Setting.
f Press Report Setting.
g Press Journal Period.
h Press Journal Period.
i Swipe up or down, or press a or b to
choose an interval.
If you choose Every 50 Faxes, go to
step m.
6, 12, 24 hours, 2 or 7 days
The machine will print the report at
the chosen time and then erase all
jobs from its memory.
If the machine’s memory becomes
full with 200 jobs before the time you
chose has passed, the machine will
print the Journal early and then erase
all jobs from the memory. If you want
an extra report before it is due to
print, you can print it without erasing
the jobs from the memory.
Every 50 Faxes
The machine will print the Journal
when the machine has stored 50
jobs.
j Press Time, and then enter the time to
start printing (in 24-hour format) using
the keyboard on the Touchscreen.
(For example: enter 19:45 for 7:45 PM.)
Press OK.
k If you chose Every 7 Days, press
Day.
l Swipe up or down, or press a or b
display Every Monday,
Every Tuesday, Every Wednesday,
Every Thursday, Every Friday,
Every Saturday or Every Sunday,
and then press the first day of the 7-day
countdown.
m Press .
Printing reports 6
Chapter 6
46
Reports 6
The following reports are available:
1 XMIT Verify
Displays the Transmission Verification
Report for your last outgoing 200 faxes
and prints the last report.
2 Address Book
Prints a list of names and numbers stored
in the Address Book memory, in
alphabetical order.
3 Fax Journal
Prints a list of information about your last
200 incoming and outgoing faxes.
(TX: transmit.) (RX: receive.)
4 User Settings
Prints a list of your current settings.
5 Network Configuration
Prints a list of your current network
settings.
6 Drum Dot Print
Prints the Drum Dot Check Sheet to
troubleshoot a dotted print problem.
7 WLAN Report
(MFC-9330CDW and MFC-9340CDW)
Prints the result of wireless LAN
connectivity diagnosis.
How to print a report 6
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Print Reports.
d Press Print Reports.
e Swipe up or down, or press a or b to
display the report you want.
f Press the report name.
g Do one of the following:
If you chose XMIT Verify, go
to step h.
For other reports, go to step i.
h Do one of the following:
To view the Transmission
Verification Report, press
View on LCD.
To print the Transmission
Verification Report, press
Print Report.
i Press OK.
47
7
7
Copy settings 7
You can change the copy settings for the next
copy.
These settings are temporary. The machine
returns to its default settings one minute after
copying.
Press Copy and then press Options. Swipe
up or down, or press a or b to scroll through
the copy settings. When the setting you want
is displayed, press it and choose your
preferred option.
When you have finished changing settings,
press Colour Start or Mono Start.
Stop copying 7
To stop copying, press .
Improving copy quality 7
You can choose from a range of quality
settings. The factory setting is Auto.
Auto
Auto is the recommended mode for
ordinary printouts. Appropriate for
documents that contain both text and
photographs.
Text
Appropriate for documents containing
mainly text.
Photo
Better copy quality for photographs.
Receipt
Appropriate for copying receipts.
a Load your document.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Swipe up or down, or press a or b to
display Quality.
f Press Quality.
g Press Auto, Text, Photo or Receipt.
h If you do not want to change additional
settings, press OK.
i Press Colour Start or Mono Start.
Making copies 7
Chapter 7
48
Enlarging or reducing copies 7
To enlarge or reduce the next copy follow
these steps:
a Load your document.
b Press (Copy).
c Enter the number of copies you want.
d Press Options.
e Swipe up or down, or press a or b to
display Enlarge/Reduce.
f Press Enlarge/Reduce.
g Press 100%, Enlarge, Reduce or
Custom(25-400%).
h Do one of the following:
If you chose Enlarge, press the
enlargement or ratio you want.
If you chose Reduce, swipe up or
down, or press a or b to display the
reduction ratio you want and press it.
If you chose Custom(25-400%),
press to erase the displayed
percentage, or press d to move the
cursor, and then enter an
enlargement or reduction ratio from
25% to 400% in 1% increments.
Press OK.
If you chose 100%, go to step i.
*
The factory setting is shown in Bold
with an asterisk.
1
Custom(25-400%) allows you to enter a
ratio from 25% to 400% in 1% increments.
i If you do not want to change additional
settings, press OK.
j Press Colour Start or Mono Start.
NOTE
Page Layout is not available with
Enlarge/Reduce.
100%*
200%
141% A5A4
104% EXELTR
97% LTRA4
94% A4LTR
91%FullPage
85% LTREXE
83% LGLA4
78% LGLLTR
70% A4A5
50%
Custom(25-400%)
1
Making copies
49
7
2-sided Copying 7
You must choose a 2-sided copy layout from
the following options before you can start
2-sided copying. The layout of your document
determines which 2-sided copy layout you
should choose.
MFC-9140CDN and MFC-9330CDW
Portrait
1–sidedi2–sided Long Edge Flip
1–sidedi2–sided Short Edge Flip
Landscape
1–sidedi2–sided Long Edge Flip
1–sidedi2–sided Short Edge Flip
MFC-9340CDW
If you want to use the automatic 2-sided copy
feature, load your document in the ADF.
Portrait
2–sidedi2–sided
1–sidedi2–sided Long Edge Flip
2–sidedi1–sided Long Edge Flip
1–sidedi2–sided Short Edge Flip
2–sidedi1–sided Short Edge Flip
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
Chapter 7
50
Landscape
2–sidedi2–sided
1–sidedi2–sided Long Edge Flip
2–sidedi1–sided Long Edge Flip
1–sidedi2–sided Short Edge Flip
2–sidedi1–sided Short Edge Flip
a Load your document.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Swipe up or down, or press a or b to
display 2-sided Copy.
f Press 2-sided Copy.
g Swipe up or down, or press a or b to
display the following layout options:
Off
,
2-sided2-sided
1
,
1-sided2-sided Long Edge Flip
,
2-sided1-sided Long Edge Flip
1
,
1-sided2-sided Short Edge Flip
,
2-sided1-sided Short Edge Flip
1
1
For MFC-9340CDW
h Press the option you want.
i If you do not want to change additional
settings, press OK.
j Press Colour Start or Mono Start
to scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
to step k.
k After the machine scans the page, press
Scan to scan the next page.
l Place the next page on the scanner
glass.
m Press OK.
Repeat steps k and m for each page of
the layout.
n After scanning all the pages, press
Complete in step k to finish.
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
1
2
Making copies
51
7
Adjusting Density and
Contrast 7
Density 7
Adjust the copy density to make copies
darker or lighter.
a Load your document.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Swipe up or down, or press a or b to
display Density.
f Press Density.
g Press a level of density, from Light to
Dark.
h If you do not want to change additional
settings, press OK.
i Press Colour Start or Mono Start.
Contrast 7
Adjust the contrast to help an image look
sharper and more vivid.
a Load your document.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Swipe up or down, or press a or b to
display Contrast.
f Press Contrast.
g Press a level of contrast.
h If you do not want to change additional
settings, press OK.
i Press Colour Start or Mono Start.
Chapter 7
52
Sorting copies 7
You can sort multiple copies. Pages will be
sorted in the order 1 2 3, 1 2 3, 1 2 3, and so
on.
a Load your document.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Swipe up or down, or press a or b to
display Stack/Sort.
f Press Stack/Sort.
g Press Sort.
h Read and confirm the displayed list of
settings you have chosen. If you do not
want to change any other settings, press
OK.
i Press Colour Start or Mono Start
to scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
If you are using the scanner glass, go
to step j.
j After the machine scans the page, press
Scan to scan the next page.
k Place the next page on the scanner
glass.
l Press OK.
Repeat steps j and l for each page of
the layout.
m After scanning all the pages, press
Complete in step j to finish.
Making N in 1 copies
(page layout) 7
You can reduce the amount of paper used
when copying by using the N in 1 copy
feature. This allows you to copy two or four
pages onto one page. If you want to copy
both sides of an ID card onto one page, see
2 in 1 ID Copy on page 54.
IMPORTANT
• Make sure the paper size is set to A4,
Letter, Legal or Folio.
• You cannot use the Enlarge/Reduce
setting with the N in 1 feature.
•(P) means Portrait and (L) means
Landscape.
a Load your document.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Swipe up or down, or press a or b to
display Page Layout.
f Press Page Layout.
g Swipe up or down, or press a or b to
display Off(1in1), 2in1(P),
2in1(L), 2in1(ID)
1
, 4in1(P) or
4in1(L).
1
For information about 2in1(ID), see 2 in 1 ID
Copy on page 54.
h Press the option you want.
i If you do not want to change additional
settings, press OK.
j Press Colour Start or Mono Start
to scan the page.
If you placed the document in the ADF,
the machine scans the pages and starts
printing.
Making copies
53
7
If you are using the scanner glass, go
to step k.
k After the machine scans the page, press
Scan to scan the next page.
l Place the next page on the scanner
glass.
m Press OK.
Repeat steps k and m for each page of
the layout.
n After scanning all the pages, press
Complete in step k to finish.
If you are copying from the ADF: 7
Place your document face up in the direction
shown in the illustration:
2in1(P)
2in1(L)
4in1(P)
4in1(L)
If you are copying from the scanner
glass: 7
Place your document face down in the
direction shown in the illustration:
2in1(P)
2in1(L)
4in1(P)
4in1(L)
Chapter 7
54
2 in 1 ID Copy 7
You can copy both sides of your identification
card onto one page, keeping the original card
size.
NOTE
You can copy an identification card to the
extent permitted under applicable laws
(see Product Safety Guide: Unlawful use
of copying equipment (MFC and DCP
only).)
a Place your identification card face down
near the left corner of the scanner glass.
1 4 mm or greater (top, left)
Even if a document is placed on the
ADF, the machine scans the data
from the scanner glass when in this
mode.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Swipe up or down, or press a or b to
display Page Layout.
f Press Page Layout.
g Swipe up or down, or press a or b to
display 2in1(ID).
h Press 2in1(ID).
i Read and confirm the displayed list of
settings you have chosen, and then
press OK.
j Press Colour Start or Mono Start.
The machine starts scanning one side of
the identification card.
k After the machine has scanned one
side, press Scan. Turn over the
identification card and place it near the
left corner of the scanner glass, then
press OK to scan the other side.
NOTE
When 2 in 1 ID Copy is chosen, the
machine sets the quality to Photo and the
contrast to +2.
l Press .
1
Making copies
55
7
Adjusting the Colour
Saturation 7
You can change the default setting for colour
saturation.
a Load your document.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Swipe up or down, or press a or b to
display Colour Adjust.
f Press Colour Adjust.
g Press Red, Green or Blue.
h Press a level of colour saturation.
i Repeat steps g and h if you want to
adjust the next colour.
After adjusting the colour settings,
press .
j If you do not want to change additional
settings, press OK.
k Press Colour Start.
Making 2-sided N in 1 copies
(MFC-9340CDW) 7
When you make 2-sided N in 1 copies from a
2-sided document, you must choose a layout
option in 2-sided Copy Page Layout.
You will be able to access 2-sided Copy
Page Layout after selecting
2-sided2-sided for 2-sided Copy
and any N in 1 layout for Page Layout.
You must select an appropriate option in the
table.
IMPORTANT
• Load your document in the ADF to use the
2-sided Copy Page Layout feature.
• The 2-sided Copy Page Layout
feature does not work when you choose
2in1(ID) for Page Layout.
a Load your document in the ADF.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Select 2-sided2-sided in
2-sided Copy (see 2-sided Copying
on page 49).
Bound
Edge of the
Document
Edge of the
copies to
be bound
Option you
must choose
Long Edge Long Edge LongEdge
LongEdge
Short Edge LongEdge
ShortEdge
Short Edge Long Edge ShortEdge
LongEdge
Short Edge ShortEdge
ShortEdge
Chapter 7
56
f Select 2in1(P), 2in1(L), 4in1(P)
or 4in1(L) in Page Layout (see
Making N in 1 copies (page layout)
on page 52).
g Swipe up or down, or press a or b to
display 2-sided Copy Page Layout.
h Press 2-sided Copy Page Layout.
i Press LongEdge LongEdge,
LongEdge ShortEdge,
ShortEdge LongEdge or
ShortEdge ShortEdge.
j If you do not want to change additional
settings, press OK.
k Press Colour Start or Mono Start.
Removing Background
Colour 7
Remove Background Colour removes the
background colour of the document when
copying. Using this function will make the
copy clearer to read and may save toner.
NOTE
This function is for use only when making
colour copies.
a Load your document.
b Press (Copy).
c Enter the number of copies.
d Press Options.
e Swipe up or down, or press a or b to
display Advanced Settings.
f Press Advanced Settings.
g Press Remove Background Colour.
h Press Low, Medium or High.
i If you do not want to change additional
settings, press OK.
j Press Colour Start.
Making copies
57
7
Saving copy options as a
Shortcut 7
You can store the copy options you use most
often by saving them as a Shortcut.
a Press (Copy).
b Press Options.
c Swipe up or down, or press a or b to
display Quality, Enlarge/Reduce,
2-sided Copy, Density, Contrast,
Stack/Sort, Page Layout,
Colour Adjust,
2-sided Copy Page Layout or
Remove Background Colour, and
then press the setting you want.
d Swipe up or down, or press a or b to
display the available options, and then
press your new option.
Repeat steps c and d for each setting
you want to change.
e When you have finished choosing new
options, press Save as Shortcut.
f Read and confirm the displayed list of
options you have chosen for the
Shortcut, and then press OK.
g Enter a name for the Shortcut using the
keyboard on the Touchscreen.
(To help you enter letters: see
Basic User's Guide: Entering text.)
Press OK.
h Press OK to save your Shortcut.
i Press .
Saving paper 7
You can use the Paper Save preset to reduce
the amount of paper consumed for copies.
Paper Save uses the 4 in 1 layout and 2-sided
copy options.
a Load your document.
b Press (Copy).
c Swipe left or right to display
Paper Save.
d Press Paper Save.
e Enter the number of copies.
f Do one of the following:
To change more settings, go to
step g.
When you have finished changing
settings, go to step j.
g Press Options.
h Swipe up or down, or press a or b to
display the available settings, and then
press the setting you want.
i Swipe up or down, or press a or b to
display the available options, and then
press your new option.
Repeat steps h and i for each setting
you want. When you have finished
changing settings, press OK.
j Press Colour Start or Mono Start.
58
A
Checking the machine A
Printing the test print A
You can print a Test Print page to check your
print quality.
a Press .
b Press Test Print.
c The Touchsceen will show
Press [OK].
Press OK.
The machine will print the Test Print
page.
d Press .
Checking the Page Counters A
You can see the machine’s Page Counters
for copies, printed pages, reports and lists,
faxes or a summary total.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Machine Info..
d Press Machine Info..
e Press Page Counter.
The Touchscreen shows number of
pages for Total, Fax/List, Copy and
Print.
f Press .
Checking the remaining life of
toner cartridges A
You can see the approximate remaining life
of the toner cartridges.
a Press .
b Press Toner Life.
The Touchscreen will show the
approximate remaining life of the toner
cartridges in a bar chart.
c Press .
Checking the remaining life of
parts A
You can see the machine’s parts life on the
Touchscreen.
a Press .
b Press All Settings.
c Swipe up or down, or press a or b to
display Machine Info..
d Press Machine Info..
e Press Parts Life.
f Press a or b to see the approximate
remaining parts life of the
Drum Black(BK), Drum Cyan(C),
Drum Magenta(M),
Drum Yellow(Y), Belt Unit,
Fuser, PF kit.
g Press .
NOTE
The remaining life of the toner cartridge is
listed on the User Settings report (see
How to print a report on page 46).
Routine maintenance A
Routine maintenance
59
A
Replacing periodic
maintenance parts A
The periodic maintenance parts will need to
be replaced regularly to maintain the print
quality. The Fuser Unit and PF Kit parts listed
in the table must be replaced after printing
approximately 50,000 pages
1
. Contact
Brother customer service when these
messages appear on the Touchscreen.
1
A4 or Letter size single-sided pages.
Touchscreen
message
Description
Replace Fuser Replace the fuser unit.
Replace PF kit Replace the paper feeding
kit for the paper tray.
60
Packing and shipping
the machine A
WARNING
This machine is heavy and weighs more
than 20.0 kg. To prevent possible injuries,
at least two people should lift the machine.
One person should hold the front of the
machine, and one person should hold the
back, as shown in the illustration. Be careful
not to trap your fingers when you put the
machine down.
NOTE
If for any reason you must ship your
machine, carefully repack the machine in
the original packaging to avoid any
damage during transit. The machine
should be adequately insured with the
carrier.
a Press and hold down to turn off the
machine. Leave the machine turned off
for at least 10 minutes to cool down.
b Disconnect all the cables, and then
unplug the power cord from the
electrical socket.
c Place the packing material (1) into the
carton.
1
FRONT
Routine maintenance
61
A
d Wrap the machine in a plastic bag, then
place it on the bottom packing material
(1).
e Place the packing material (2) marked
“R” on the right of the machine. Place
the packing material (3) marked “L” on
the left of the machine. Place the AC
power cord and printed materials in the
original carton as shown in the
illustration.
f Close the carton and tape it shut.
FRONT
1
2
3
R
L
62
B
This is a comprehensive list of features and terms that appear in Brother manuals. Availability of
these features depends on the model you purchased.
Glossary B
3.7 in. (93.4 mm) Touchscreen LCD and
Touchpanel
The Touchscreen LCD (Liquid Crystal
Display) on the machine shows interactive
messages and prompts for using the
machine. You can operate the
Touchscreen by pressing or swiping on
the screen. The Touchpanel, on the right
side of the Touchscreen LCD, illuminates
its LEDs when they are available for the
current operation.
Address Book
Names and numbers you have stored for
easy dialling.
Address Book List
A listing of names and numbers stored in
the Address Book memory, in alphabetical
order.
ADF (automatic document feeder)
The document can be placed in the ADF
and scanned one page at a time
automatically.
Auto Reduction
Reduces the size of incoming faxes.
Automatic fax transmission
Sending a fax without picking up the
handset of the external telephone.
Automatic Redial
A feature that enables your machine to
redial the last fax number after five
minutes if the fax did not go through
because the line was busy.
Backup Print
Your machine prints a copy of every fax
that is received and stored in memory.
This is a safety feature so you will not lose
messages during a power failure.
Batch Transmission
As a cost saving feature, all delayed faxes
to the same fax number will be sent as one
transmission.
Beeper Volume
Volume setting for the sound when you
press a key or make an error.
Broadcasting
The ability to send the same fax message
to more than one location.
BT Call Sign
A subscriber service purchased from the
telephone company in the U.K. that gives
you another phone number on an existing
phone line. The Brother machine uses the
new number to simulate a dedicated fax
line.
Cancel Job
Cancels a programmed print job and
clears it from the machine’s memory.
CNG tones
The special tones (beeps) sent by fax
machines during automatic transmission
to tell the receiving machine that a fax
machine is calling.
Caller ID
A service purchased from the telephone
company that lets you see the number (or
name) of the party calling you.
Coding method
Method of coding the information
contained in the document. All fax
machines must use a minimum standard
of Modified Huffman (MH). Your machine
is capable of greater compression
methods, Modified Read (MR), Modified
Modified Read (MMR) and JBIG, if the
receiving machine has the same
capability.
Glossary
63
B
Communication error (or Comm. Error)
An error during fax sending or receiving,
usually caused by line noise or static.
Compatibility group
The ability of one fax unit to communicate
with another. Compatibility is assured
between ITU-T Groups.
Contrast
Setting to compensate for dark or light
documents, by making faxes or copies of
dark documents lighter and light
documents darker.
Delayed Fax
Sends your fax at a specified later time
that day.
Density
Changing the Density makes the whole
image lighter or darker.
Dual Access
Your machine can scan outgoing faxes or
scheduled jobs into the memory at the
same time it is sending a fax, receiving a
fax, or printing an incoming fax.
ECM (Error Correction Mode)
Detects errors during fax transmission
and resends the pages of the fax that had
an error.
Extension telephone
A telephone on the fax number that is
plugged into a separate wall socket.
External phone
A TAD (telephone answering device) or
telephone that is connected to your
machine.
F/T Ring Time
The length of time that the Brother
machine fast double-rings (when the
Receive Mode setting is Fax/Tel) to notify
you to pick up a voice call that it answered.
Fax Detect
Enables your machine to respond to CNG
tones if you interrupt a fax call by
answering it.
Fax Forwarding
Sends a fax received into the memory to
another pre-programmed fax number.
Fax Journal
Lists information about the last
200 incoming and outgoing faxes. TX
means Transmit. RX means Receive.
Fax Storage
You can store faxes in the memory.
Fax tones
The signals sent by sending and receiving
fax machines while communicating
information.
Fax/Tel
You can receive faxes and telephone
calls. Do not use this mode if you are
using a telephone answering device
(TAD).
Fine resolution
Resolution is 203 × 196 dpi. It is used for
small print and graphs.
Greyscale
The shades of grey available for copying
and faxing photographs.
Group number
A combination of Address Book numbers
that are stored in Address Book for
Broadcasting.
Journal Period
The pre-programmed time period
between automatically printed Fax
Journal Reports. You can print the Fax
Journal on demand without interrupting
the cycle.
Manual fax
When you lift the handset of your external
telephone so you can hear the receiving
fax machine answer before you press
Fax Start to begin transmission.
OCR (optical character recognition)
Nuance™ PaperPort™ 12SE or Presto!
PageManager software application
converts an image of text to text you can
edit.
64
Out of Paper Reception
Receives faxes into the machine’s
memory when the machine is out of paper.
Overseas Mode
Makes temporary changes to the fax
tones to accommodate noise and static on
overseas telephone lines.
Pause
Allows you to place a 2.8 second delay in
the dialling sequence while you are
dialling using the dial pad or while you are
storing numbers in Address Book. Press
Pause as many times as needed for
longer pauses.
Polling
The process of a fax machine calling
another fax machine to retrieve waiting fax
messages.
Pulse
A form of rotary dialling on a telephone
line.
Real Time Transmission
When memory is full, you can send faxes
in real time.
Remaining Jobs
You can check which programmed fax
jobs are waiting in the memory and cancel
the jobs individually.
Remote Access Code
Your own four-digit code (– – –l) that
allows you to call and access your
machine from a remote location.
Remote Activation code
(Fax/Tel mode only)
Press this code (l51) when you answer a
fax call on an extension or external
telephone.
Remote Deactivation code
(Fax/Tel mode only)
When the machine answers a voice call, it
fast double-rings. You can pick up at an
extension or external telephone by
pressing this code (#51).
Remote Retrieval Access
The ability to access your machine
remotely from a touch tone telephone.
Resolution
The number of vertical and horizontal lines
per inch.
Ring Delay
The number of rings before the machine
answers in Fax and Fax/Tel modes.
Ring Volume
Volume setting for the machine’s ring.
Scanning
The process of sending an electronic
image of a paper document into your
computer.
Search
An alphabetical electronic listing of stored
Address Book and Group numbers.
Settings Tables
At-a-glance instructions that show all the
settings and options that are available for
setting up your machine.
Station ID
The stored information that appears on
the top of faxed pages. It includes the
sender’s name and fax number.
TAD (telephone answering device)
You can connect an external TAD to your
machine.
Temporary settings
You can choose certain options for each
fax transmission and copy without
changing the default settings.
Tone
A form of dialling on the telephone line
used for Touch Tone telephones.
Transmission
The process of sending faxes over the
telephone lines from your machine to the
receiving fax machine.
Glossary
65
B
User Settings List
A printed report that shows the current
settings of the machine.
Xmit Report (Transmission Verification
Report)
A listing for each transmission, that shows
its date, time and number.
66
C
Numerics
2-sided copy .............................................49
A
Address Book
broadcasting
.........................................17
using Groups
......................................17
Group dial
setting up Groups for broadcasting
....42
Apple Macintosh
See Software User's Guide.
B
Broadcasting ............................................17
cancelling
..............................................18
setting up Groups for
............................42
C
Cancelling
broadcast in process
.............................18
fax jobs in memory
................................21
fax storage
............................................29
jobs awaiting redial
...............................21
remote fax options
................................30
ControlCenter2 (for Macintosh)
See Software User's Guide.
ControlCenter4 (for Windows
®
)
See Software User's Guide.
Copy
2 in 1 ID Copy
....................................... 54
2-sided
.................................................. 49
button
................................................... 47
contrast
................................................. 51
Density
................................................. 51
Enlarge/Reduce
.................................... 48
N in 1 (page layout)
.............................. 52
quality
................................................... 47
saving paper
......................................... 57
sort
....................................................... 52
temporary settings
................................ 47
using scanner glass
..................50, 52, 53
Cover page
.............................................. 23
custom comments
................................ 23
printed form
.......................................... 24
D
Daylight Saving Time ................................ 1
Deep Sleep mode
...................................... 3
Delayed batch transmission
.................... 20
Destination Display
.................................. 25
Dialling
Groups (broadcasting)
.......................... 17
restricting dialling
.................................. 12
Drum unit
checking (remaining life)
...................... 58
Dual access
............................................. 16
E
Enlarge/Reduce ....................................... 48
Index
67
C
F
Fax codes
changing
...............................................31
remote access code
..............................31
Fax forwarding
changing remotely
......................... 32, 33
programming a number
........................28
Fax storage
..............................................29
printing from memory
............................36
turning off
..............................................30
turning on
..............................................29
Fax, stand-alone
receiving
fax forwarding
............................. 28, 32
fax receive stamp
...............................35
into memory (fax storage)
..................29
polling receive
....................................37
reducing to fit on paper
......................34
retrieving from a remote site
....... 32, 33
sending
.................................................13
broadcasting
......................................17
cancelling from memory
.....................21
contrast
..............................................15
delayed batch
....................................20
delayed fax
........................................20
destination display
.............................25
from memory (dual access)
...............16
manual
...............................................16
overseas
............................................19
polled transmit
...................................26
real time transmission
........................19
resolution
...........................................15
G
Groups for broadcasting ..........................42
M
Machine information
checking remaining life of parts
............ 58
page counts
.......................................... 58
Macintosh
See Software User's Guide.
Maintenance, routine
............................... 58
checking the remaining life of parts
...... 58
Manual
transmission
......................................... 16
Memory
storage
................................................... 1
N
N in 1 (page layout) ................................. 52
Network
faxing
See Software User's Guide.
printing
See Network User's Guide.
scanning
See Software User's Guide.
Nuance™ PaperPort™ 12SE
See Software User's Guide and Help in the
PaperPort™ 12SE application to access
How-to-Guides.
O
Outgoing Calls
Add to Address Book
........................... 42
68
P
Page layout (N in 1) .................................52
PC-Fax
See Software User's Guide.
Polling
polled transmit
.......................................26
polling receive
.......................................37
Power failure
..............................................1
Presto! PageManager
See Software User's Guide. See also Help
in the Presto! PageManager application.
Print
fax from memory
...................................36
reports
...................................................46
Printing
See Software User's Guide.
Q
Quality
copying
..................................................47
R
Reducing
copies
....................................................48
incoming faxes
......................................34
Remote retrieval
.......................................31
access code
..........................................31
commands
............................................32
getting your faxes
..................................33
Remote setup
See Software User's Guide.
Reports
............................................. 45, 46
Drum Dot Print
......................................46
Fax Journal
.................................... 45, 46
journal period
.....................................45
how to print
...........................................46
Network Configuration
..........................46
Tel Index List
.........................................46
Transmission Verification
......................45
User Settings
........................................46
WLAN Report
........................................46
Resolution
fax (standard, fine, superfine, photo)
....15
setting for next fax
.................................15
S
Scanning
See Software User's Guide.
Security
restricting dialling
.................................. 12
Secure function lock
administrator password
....................... 6
Setting lock
........................................... 10
Sleep mode
............................................... 2
Sort
.......................................................... 52
T
Temporary copy settings ......................... 47
Toner Save
................................................ 2
Touchscreen
backlight brightness
................................ 3
W
Windows
®
See Software User's Guide.
Wireless Network
See Quick Setup Guide and
Network User's Guide.
www.brotherearth.com
Visit us on the World Wide Web
http://www.brother.com/
These machines are approved for use in the country of purchase only. Local Brother companies
or their dealers will only support machines purchased in their own countries.
… 7 …

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Brother-MFC-9140CDN

  • In afdruk zit een band met een vlekkerige afdruk. Hoe kan ik de drum reinigen of afstellen? Brother MFC-9140CDN Gesteld op 26-9-2020 om 15:34

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother MFC-9140CDN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother MFC-9140CDN in de taal/talen: Engels als bijlage per email.

De handleiding is 1,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Brother MFC-9140CDN

Brother MFC-9140CDN Gebruiksaanwijzing - Nederlands - 80 pagina's

Brother MFC-9140CDN Gebruiksaanwijzing - Nederlands - 252 pagina's

Brother MFC-9140CDN Installatiehandleiding - Nederlands - 44 pagina's

Brother MFC-9140CDN Installatiehandleiding - Deutsch - 44 pagina's

Brother MFC-9140CDN Gebruiksaanwijzing - Deutsch - 78 pagina's

Brother MFC-9140CDN Gebruiksaanwijzing - Deutsch - 259 pagina's

Brother MFC-9140CDN Installatiehandleiding - English - 42 pagina's

Brother MFC-9140CDN Gebruiksaanwijzing - English - 234 pagina's

Brother MFC-9140CDN Installatiehandleiding - Français - 44 pagina's

Brother MFC-9140CDN Gebruiksaanwijzing - Français - 79 pagina's

Brother MFC-9140CDN Gebruiksaanwijzing - Français - 256 pagina's

Brother MFC-9140CDN Aanvulling / aanpassing - Alle talen - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info