718773
213
Verklein
Vergroot
Pagina terug
1/236
Pagina verder
TROUBLESHOOTING
211
Appendix
6
Skipped stitches Needle is turned, bent or the point is dull. Replace the needle. 69
Needle is installed incorrectly. Reinstall the needle correctly. 69
Needle is defective. Replace the needle. 69
Dust or lint has collected under the needle
plate.
Remove the dust or lint with the brush. 198
Thin or stretch fabrics are being sewn. Sew with one sheet of thin paper under the
fabric.
84
No stitching Needle is turned, bent or the point is dull. Replace the needle. 69
Bobbin is set incorrectly. Reset the bobbin thread correctly. 58
Upper threading is incorrect. Check the steps for threading the machine and
rethread the machine.
61
High-pitched sound
while sewing
Dust or lint is caught in the feed dogs. Remove the dust or lint. 198
Pieces of thread are caught in the race. Clean the race. 198
Upper threading is incorrect. Check the steps for threading the machine and
rethread the machine.
61
A bobbin designed specifically for this
machine is not used.
Incorrect bobbins will not work properly. Only
use a bobbin designed specifically for this
machine.
58
There are needle holes or friction scratches in
the bobbin case.
Replace the bobbin case, or consult your
authorized Brother dealer.
198
Fabric does not feed
through the machine.
Feed dogs are set in the down position.
Press , and then turn the handwheel to
raise the feed dogs.
126
Stitches are too close together. Lengthen the stitch length setting. 86
Wrong presser foot was used. Use the correct presser foot.
218
Needle is turned, bent or the point is dull. Replace the needle. 69
Thread is entangled. Cut the entangled thread and remove it from
the race.
Zigzag foot “J” is slanted on a thick seam at
the beginning of stitching.
Use the presser foot locking pin (black button
on the left side) on zigzag foot “J” to keep the
presser foot level while sewing.
83
The fabric feeds in
the opposite
direction.
The feed mechanism is damaged. Contact your authorized Brother dealer.
The needle contacts
the needle plate.
The needle clamp screw is loose. Firmly tighten the needle clamp screw. If the
needle is bent or blunt, replace it with a new
one.
70
Needle is turned, bent or the point is dull. Replace the needle. 69
Fabric being sewn
with the machine
cannot be removed.
Thread is tangled below the needle plate. Lift up the fabric and cut the threads below it,
and clean the race.
202
A broken needle has
fallen into the
machine.
Turn off the machine, and then remove the
needle plate. If the needle that fell into the
machine can be seen, use tweezers to remove
it. After removing the needle, return the needle
plate to its original position.
Before turning on the machine, slowly turn the
handwheel toward you to check that it turns
smoothly. If the handwheel does not turn
smoothly or the needle that fell into the
machine cannot be removed, consult your
authorized Brother dealer.
The handwheel feels
sluggish when it is
turned.
Thread is tangled in the bobbin case. Remove the tangled thread from the bobbin
case. Re-install the bobbin case so it is
correctly positioned.
202
The built-in camera
cannot detect the
buttonhole foot.
The buttonhole foot is dirty. Clean the area of the buttonhole foot to be
detected.
141
Mark “A+” or 3 dots on the presser foot is
shaded.
Keep these area clean. 141
Problem Cause Solution Page
213

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother Innov-is XP1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother Innov-is XP1 in de taal/talen: Engels als bijlage per email.

De handleiding is 8,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Brother Innov-is XP1

Brother Innov-is XP1 Gebruiksaanwijzing - Nederlands - 204 pagina's

Brother Innov-is XP1 Gebruiksaanwijzing - Nederlands - 236 pagina's

Brother Innov-is XP1 Gebruiksaanwijzing - Deutsch - 204 pagina's

Brother Innov-is XP1 Gebruiksaanwijzing - Deutsch - 236 pagina's

Brother Innov-is XP1 Gebruiksaanwijzing - English - 204 pagina's

Brother Innov-is XP1 Gebruiksaanwijzing - Français - 204 pagina's

Brother Innov-is XP1 Gebruiksaanwijzing - Français - 236 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info