718773
189
Verklein
Vergroot
Pagina terug
1/204
Pagina verder
TROUBLESHOOTING
187
Appendix
5
While embroidering
Nothing happens,
even if the LCD
display is pressed
The screen has been locked. Press either of the following keys to unlock the
screen.
The LCD screen is
fogged up.
Condensation has formed on the LCD screen. After a while, the cloudiness will disappear.
Embroidery unit does
not operate.
Embroidery unit is not attached correctly. Reattach the embroidery unit correctly.
13
Embroidery frame was attached before the
unit was initialized.
Remove the embroidery unit, and then perform
the initialization process correctly.
13
Pointer of the
projector does not
indicate the position
correctly
With thick elastic fabric, the position will be
misaligned only at raised parts in the fabric.
Manually adjust the position according to the
thickness of the fabric.
47
With fabric having a very uneven surface, the
position is not correctly aligned.
The pointer indication should be used only as
a reference.
Problem Cause Solution Page
Machine does not
operate.
“Start/Stop” button was not pressed. Press the “Start/Stop” button.
There is no pattern selected. Select a pattern.
36
Embroidery foot is not lowered. Lower the embroidery foot.
Needle breaks. Needle is installed incorrectly. Reinstall the needle correctly. 11
Needle clamp screw is not tightened. Tighten the needle clamp screw. 12
Needle is turned or bent. Replace the needle. 11
Using improper needle or thread for the
selected fabric.
Refer to the “Fabric/Thread/Needle
Combinations” chart in the Operation Manual
(Sewing).
Wrong embroidery foot was used. Use the recommended embroidery foot.
10
Upper thread tension is too tight. Adjust the thread tension. 102
Fabric is pulled during embroidering. Do not pull the fabric during embroidering.
Spool cap is set incorrectly. Check the method for attaching the spool cap,
then reattach the spool cap.
22
There are scratches around the opening in the
needle plate.
Replace the needle plate, or consult your
authorized Brother dealer.
There are scratches around the opening in the
embroidery foot.
Replace the embroidery foot, or consult your
authorized Brother dealer.
9
There are scratches on the bobbin case. Replace the bobbin case, or consult your
authorized Brother dealer.
Needle is defective. Replace the needle. 11
A bobbin designed specifically for this
machine is not used.
Incorrect bobbins will not work properly. Only
use a bobbin designed specifically for this
machine.
20
Upper threading is incorrect. Check the steps for threading the machine and
rethread the machine.
22
Bobbin is set incorrectly. Reset the bobbin thread correctly. 20
Embroidery foot is attached incorrectly. Attach the embroidery foot correctly. 9
Screw of the presser foot holder is loose. Securely tighten the screw of the presser foot.
10
Fabric is too thick. Use fabric that the needle can pierce when the
handwheel is turned.
Stabilizer is not attached to fabric being
embroidered.
Attach stabilizer. 28
Bobbin thread is incorrectly wound. Use a correctly wound bobbin. 15
Problem Cause Solution Page
189

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother Innov-is XP1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother Innov-is XP1 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Brother Innov-is XP1

Brother Innov-is XP1 Gebruiksaanwijzing - Nederlands - 204 pagina's

Brother Innov-is XP1 Gebruiksaanwijzing - Nederlands - 236 pagina's

Brother Innov-is XP1 Gebruiksaanwijzing - Deutsch - 204 pagina's

Brother Innov-is XP1 Gebruiksaanwijzing - Deutsch - 236 pagina's

Brother Innov-is XP1 Gebruiksaanwijzing - English - 236 pagina's

Brother Innov-is XP1 Gebruiksaanwijzing - Français - 204 pagina's

Brother Innov-is XP1 Gebruiksaanwijzing - Français - 236 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info