718768
45
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
Troubleshooting
43
APPENDIX
3
If the machine stops operating correctly, check the
following possible problems before requesting service.
You can solve most problems by yourself. If you need
additional help, the Brother Solutions Center offers the
latest FAQs and troubleshooting tips. Visit us at “ http://
s.brother/cpjae ”.
If the problem persists, contact your Brother dealer or the
nearest Brother authorized service center.
List of symptoms
Check the following possible problems before requesting
service. If the reference page is “*”, contact your authorized
Brother dealer or the nearest Brother authorized service
center.
Getting ready
While embroidering
Troubleshooting
Symptom, Cause/solution
Reference
Cannot thread the needle.
Needle is not in the correct position.
Press the “Needle position” button to raise the
needle.
6
Needle is installed incorrectly. 18
Needle is turned, bent or the point is dull. 18
Upper threading is incorrect.
The needle threader lever is not lowered until it
clicks.
15
The needle threader hook is bent and does not
pass through the eye of the needle.
*
The needle threader lever cannot be moved or
returned to its original position.
*
Bobbin thread does not wind neatly on the bobbin.
The thread is not passed through the bobbin
winding thread guide correctly.
11
The thread that was pulled out from the bobbin-
winding thread guide was incorrectly wound onto
the bobbin.
13
The empty bobbin was not set on the pin
properly.
11
While winding the bobbin, the bobbin thread was
wound below the bobbin winder seat.
The thread was incorrectly passed under the
pretension disk on the bobbin-winding thread
guide.
Remove any entangled thread, and then wind
the bobbin.
11, 42
The bobbin thread cannot be pulled up.
Bobbin is set incorrectly. 13
Nothing appears in the LCD.
Main power switch is not turned on. 9
The plug of the power cord is not inserted into an
electrical outlet.
9
The LCD screen is fogged up.
Condensation has formed on the LCD screen.
After a while, the cloudiness will disappear.
The operation keys do not respond, or the key
response is too sensitive.
A glove is worn when the keys are pressed.
The keys are pressed with a fingernail.
A non-electrostatic touch pen is being used.
The sensitivity of the operation keys is not set for
the user.
6, 11
The machine light does not come on.
[Light] is set to [OFF] in the settings screen. 10
Embroidery unit does not operate.
Embroidery unit is not attached correctly. 19
Symptom, Cause/solution
Reference
Machine does not operate.
“Start/Stop” button was not pressed. 6
The bobbin winder shaft is pushed to the right. 11
There is no pattern selected. 24
Presser foot is not lowered. 16
Needle breaks.
Needle is installed incorrectly. 18
Needle clamp screw is not tightened. 18
Needle is turned or bent. 18
Using improper needle or thread for the selected
fabric.
18
Upper thread tension is too tight. 29
Spool of thread is set incorrectly. 11
There are scratches around the opening in the
needle plate.
*
There are scratches around the opening in the
presser foot.
*
There are scratches on the bobbin case. *
Symptom, Cause/solution
Reference
45

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother Innov-is M240ED bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother Innov-is M240ED in de taal/talen: Engels als bijlage per email.

De handleiding is 2,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Brother Innov-is M240ED

Brother Innov-is M240ED Gebruiksaanwijzing - Nederlands - 52 pagina's

Brother Innov-is M240ED Gebruiksaanwijzing - Deutsch - 52 pagina's

Brother Innov-is M240ED Gebruiksaanwijzing - Français - 52 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info