718716
64
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
Troubleshooting
62
While sewing
The sewing lamp does not come on.
The sewing light is damaged.
Contact your authorized Brother dealer or the
nearest Brother authorized service center.
The LCD screen is fogged up.
Condensation has formed on the LCD screen.
After a while, the cloudiness will disappear.
Symptom, Cause/solution
Reference
Machine does not operate.
“Start/Stop” button was not pressed. 23
The bobbin winder shaft is pushed to the right. 12
There is no stitch selected. 23
Presser foot is not lowered. 24
“Start/Stop” button was pressed with the foot
controller attached.
24
Needle breaks.
Needle is installed incorrectly. 20
Needle clamp screw is not tightened. 20
Needle is turned or bent. 20
Using improper needle or thread for the selected
fabric.
19
Wrong presser foot was used. 21
Upper thread tension is too tight. 27
Fabric is pulled during sewing.
Spool of thread is set incorrectly. 12
There are scratches around the opening in the
needle plate.
* There is a notch on the left side of the opening
in the needle plate. This is not a scratch.
*
There are scratches around the opening in the
presser foot.
*
There are scratches on the bobbin case. *
A bobbin designed specifically for this machine is
not used.
12
Upper threading is incorrect. 15
Symptom, Cause/solution
Reference
1 Notch
a
Bobbin is set incorrectly. 14
Presser foot is attached incorrectly. 21
Screw of the presser foot holder is loose. 22
Fabric is too thick. 19, 30
Fabric is fed forcefully when sewing thick fabric
or thick seams.
30
Stitch length is too short. 27
Bobbin thread is incorrectly wound. 12
Upper thread breaks.
Machine is not threaded correctly (used the
wrong spool cap, spool cap is loose, the thread
did not catch the needle bar threader, etc.).
15
Knotted or tangled thread is being used.
The selected needle is not appropriate for the
thread being used.
19
Upper thread tension is too tight. 27
Thread is tangled. 57
Needle is turned, bent or the point is dull. 20
Needle is installed incorrectly. 20
There are scratches around the opening of the
needle plate.
* There is a notch on the left side of the opening
in the needle plate. This is not a scratch.
*
There are scratches around the opening in the
presser foot.
*
There are scratches on the bobbin case. *
Using improper needle or thread for the selected
fabric.
19
A bobbin designed specifically for this machine is
not used.
12
The thread is tangled on the wrong side of the fabric.
Upper threading is incorrect. 15, 58
Using improper needle or thread for the selected
fabric.
19
The upper thread is too tight.
The bobbin thread is incorrectly installed. 14, 57
Symptom, Cause/solution
Reference
1 Notch
a
64

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Brother-Innov-is-A16

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother Innov-is A16 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother Innov-is A16 in de taal/talen: Engels als bijlage per email.

De handleiding is 27,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Brother Innov-is A16

Brother Innov-is A16 Gebruiksaanwijzing - Nederlands - 72 pagina's

Brother Innov-is A16 Gebruiksaanwijzing - Deutsch - 72 pagina's

Brother Innov-is A16 Gebruiksaanwijzing - Français - 72 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info