718734
7
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
Operation Manual
Sewing Machine
Product Code: 888-M70
Be sure to read this document before using the machine.
We recommend that you keep this document nearby for future reference.
1
Thank you for purchasing this machine. Before using this
machine, carefully read the “IMPORTANT SAFETY
INSTRUCTIONS”, and then study this manual for the
correct operation of the various functions.
In addition, after you have finished reading this manual,
store it where it can quickly be accessed for future
reference.
Please read these safety instructions before attempting to
use the machine.
DANGER
- To reduce the risk of electrical shock
1Always unplug the machine from the electrical
outlet immediately after using, when cleaning,
making any user servicing adjustments mentioned in
this manual, or if you are leaving the machine
unattended.
WARNING
- To reduce the risk of burns, fire, electrical shock, or
injury to persons.
2Always unplug the machine from the electrical
outlet when making any adjustments mentioned in
the instruction manual.
To unplug the machine, switch the machine to the
symbol “O” position to turn it off, then grasp the
plug and pull it out of the electrical outlet. Do not
pull on the cord.
Plug the machine directly into the electrical outlet.
Do not use an extension cord.
Always unplug your machine if there is a power
failure.
3Electrical Hazards:
This machine should be connected to an AC power
source within the range indicated on the rating
label. Do not connect it to a DC power source or
converter. If you are not sure what kind of power
source you have, contact a qualified electrician.
This machine is approved for use in the country of
purchase only.
4Never operate this machine if it has a damaged cord
or plug, if it is not working properly, has been
dropped or damaged, or water is spilled on the unit.
Return the machine to the nearest authorized
Brother dealer for examination, repair, electrical or
mechanical adjustment.
While the machine is stored or in use if you notice
anything unusual, such as an odor, heat,
discoloration or deformation, stop using the
machine immediately and unplug the power cord.
When transporting the machine, be sure to carry it
by its handle. Lifting the machine by any other part
may damage the machine or result in the machine
falling, which could cause injuries.
When lifting the machine, be careful not to make
any sudden or careless movements, which may
cause a personal injury.
5Always keep your work area clear:
Never operate the machine with any air openings
blocked. Keep ventilation openings of the machine
and foot control free from the build up of lint, dust,
and loose cloth.
Do not store objects on the foot controller.
Never drop or insert foreign objects in any opening.
Do not operate where aerosol (spray) products are
being used or where oxygen is being administered.
Do not use the machine near a heat source, such as
a stove or iron; otherwise, the machine, power cord
or garment being sewn may ignite, resulting in fire
or an electric shock.
Do not place this machine on an unstable surface,
such as an unsteady or slanted table, otherwise the
machine may fall, resulting in injuries.
6Special care is required when sewing:
Always pay close attention to the needle. Do not use
bent or damaged needles.
Keep fingers away from all moving parts. Special
care is required around the machine needle.
Switch the machine to the symbol “O” position to
turn it off when making any adjustments in the
needle area.
Do not use a damaged or incorrect needle plate, as
it could cause the needle to break.
Do not push or pull the fabric when sewing, and
follow careful instruction when free motion stitching
so that you do not deflect the needle and cause it to
break.
INTRODUCTION
IMPORTANT SAFETY
INSTRUCTIONS
2
7This machine is not a toy:
Your close attention is necessary when the machine
is used by or near children.
The plastic bag that this machine was supplied in
should be kept out of the reach of children or
disposed of. Never allow children to play with the
bag due to the danger of suffocation.
Do not use outdoors.
8For a longer service life:
When storing this machine, avoid direct sunlight
and high humidity locations. Do not use or store the
machine near a space heater, iron, halogen lamp, or
other hot objects.
Use only neutral soaps or detergents to clean the
case. Benzene, thinner, and scouring powders can
damage the case and machine, and should never be
used.
Always consult the Operation Manual when
replacing or installing any assemblies, the presser
feet, needle or other parts to assure correct
installation.
9For repair or adjustment:
If the light unit is damaged, it must be replaced by
an authorized Brother dealer.
In the event a malfunction occurs or adjustment is
required, first follow the troubleshooting table in the
back of the Operation Manual to inspect and adjust
the machine yourself. If the problem persists, please
consult your local authorized Brother dealer.
Use this machine only for its intended use as described
in the manual.
Use accessories recommended by the manufacturer as
contained in this manual.
The contents of this manual and specifications of this
product are subject to change without notice.
For additional product information and updates, visit
our website at www.brother.com
SAVE THESE
INSTRUCTIONS
This machine is intended
for household use.
FOR USERS IN COUNTRIES
EXCEPT CENELEC COUNTRIES
This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been
given supervision or instruction
concerning use of the appliance by a
person responsible for their safety.
Children should be supervised to
ensure that they do not play with the
appliance.
FOR USERS IN CENELEC
COUNTRIES
This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
3
FOR USERS IN THE UK,
EIRE, MALTA
AND CYPRUS ONLY
IMPORTANT
In the event of replacing the plug fuse, use a fuse
approved by ASTA to BS 1362, i.e. carrying the
mark, rating as marked on plug.
Always replace the fuse cover. Never use plugs with
the fuse cover omitted.
If the available electrical outlet is not suitable for the
plug supplied with this equipment, you should
contact your authorized Brother dealer to obtain the
correct lead.
App Store is a service mark of Apple Inc.
Android and Google Play are trademarks of Google, Inc.
Use of these trademarks are subject to Google Permissions.
Trademarks
CONTENTS
4
Chapter 1 GETTING READY 5
Names of Machine Parts....................................... 5
Included accessories .............................................................. 7
Optional accessories .............................................................. 8
Attaching the stitch pattern plate ............................................ 8
Turning the Machine On/Off................................ 9
LCD Operation ................................................... 10
Viewing the LCD.................................................................. 10
Settings screen...................................................................... 11
Adjusting input sensitivity for operation keys........................ 12
Winding/Installing the Bobbin............................ 12
Winding the bobbin ............................................................. 12
Installing the bobbin............................................................. 14
Upper Threading ................................................ 16
Threading the upper thread .................................................. 16
Pulling up the bobbin thread ................................................ 18
Fabric/Thread/Needle Combinations.................. 19
Replacing the Needle.......................................... 20
Checking the needle............................................................. 20
Replacing the needle............................................................ 20
Replacing the Presser Foot.................................. 21
Replacing the presser foot .................................................... 21
Removing and attaching the presser foot holder ................... 22
Chapter 2 SEWING BASICS 23
Sewing ................................................................ 23
Selecting a stitch pattern....................................................... 23
Combining Stitch Patterns .................................................... 24
Basic sewing ........................................................................ 25
Sewing reverse/reinforcement stitches .................................. 27
Automatic reverse/reinforcement stitching............................ 27
Automatically cutting the thread........................................... 28
Setting the stitch width/stitch length ..................................... 29
Adjusting the thread tension............................... 30
Useful Sewing Tips ............................................. 30
Sewing Tips.......................................................................... 30
Sewing an even seam allowance .......................................... 31
Sewing Various Fabrics ........................................................ 32
Sewing decorative stitch patterns.......................................... 33
Chapter 3 VARIOUS STITCHES 35
Stitch Chart ........................................................ 35
Utility stitches .................................................... 40
Overcasting Stitches ............................................................. 40
Blind Hem Stitching ............................................................. 41
Buttonhole sewing................................................................ 42
Button sewing ...................................................................... 45
Zipper Insertion.................................................................... 46
Appliqué, Patchwork and Quilt Stitching.............................. 47
Other Stitching Applications................................................. 50
Making adjustments............................................ 55
Using The Memory Function .............................. 56
Saving stitch patterns............................................................ 56
Retrieving stitch patterns ...................................................... 56
Chapter 4 APPENDIX 57
Care and Maintenance........................................ 57
Restrictions on oiling............................................................ 57
Precautions on storing the machine...................................... 57
Cleaning the race ................................................................. 57
Troubleshooting.................................................. 59
Upper thread tightened up ................................................... 59
Tangled thread on wrong side of fabric ................................ 59
Incorrect thread tension........................................................ 60
Fabric is caught in the machine and cannot be removed ...... 61
If the thread becomes tangled under the bobbin winder
seat...................................................................................... 63
List of symptoms .................................................................. 63
Error messages..................................................................... 67
Operation beeps.................................................................. 68
Index.................................................................. 69
CONTENTS
Names of Machine Parts
GETTING READY
5
1
Main parts
1 Bobbin winding thread guide and pretension disk
(page 13)
2 Thread guide (page 13)
3 Spool cap (page 13)
4 Spool pin (page 13)
5 Hole for extra spool pin
This holds an extra spool pin for sewing with twin needle. (page
54) This is not a hole for lubrication. Do not insert oil into this
hole.
6 Bobbin winder (page 12)
7 LCD (liquid crystal display) (page 10)
8 Operation panel (page 6)
9 Operation buttons and sewing speed controller
(page 6)
0 Flat bed attachment (page 7, 31)
A Thread cutter (page 17)
B Needle threader lever (page 18)
C Thread tension dial (page 30)
D Handwheel
Turn the handwheel toward you (counterclockwise) to raise and
lower the needle to sew one stitch.
E Thread guide cover (page 13)
F Handle
Carry the machine by its handle when transporting.
G Presser foot lever
Raise and lower the presser foot lever to raise and lower the
presser foot.
H Feed dog position switch
Use the feed dog position switch to raise and lower the feed
dogs. (page 49)
I Main power switch (page 9)
J Power supply jack (page 9)
K Foot controller (page 26)
L Foot controller jack (page 26)
M Air vent
The air vent allows the air surrounding the motor to circulate.
Do not cover the air vent while the machine is being used.
Needle and presser foot section
1 Needle bar thread guide (page 17)
2 Needle plate (page 31)
3 Needle plate cover (page 15)
4 Bobbin cover/bobbin case (page 15, 58)
5 Feed dogs
The feed dogs feed the fabric in the sewing direction.
6 Presser foot
The presser foot applies pressure consistently on the fabric as
the sewing takes place. Attach the appropriate presser foot for
the selected stitch.
7 Presser foot holder (page 22)
8 Presser foot holder screw (page 22)
9 Buttonhole lever (page 43)
Chapter 1
GETTING READY
Names of Machine Parts
a
b
c
d
e
f
g
i
j
k
l
m
h
n
o
p
q
r
s
t
u
v
w
i
b
a
c
d
e
f
g
h
Names of Machine Parts
6
Operation buttons
1 “Start/Stop” button
Press the “Start/Stop” button to start or stop sewing.
2 Reverse stitch button
Press the reverse button to sew reverse or reinforcement
stitches depending on the selected stitch pattern. (page 27)
3 Reinforcement stitch button
Press the reinforcement button to sew a single stitch
repeatedly and tie-off. (page 27)
For character/decorative stitches, press this button to end with
a full stitch instead of at a mid-point.
The LED beside the button automatically lights up while the
stitch is being sewn and goes off when sewing is finished.
4 Needle position button
Press the needle position button to raise or lower the needle.
Pressing the button twice sews one stitch.
5 Thread cutter button
Press the thread cutter button after sewing is stopped to cut
both the upper and the bobbin threads.
6 Sewing speed controller
Slide the sewing speed controller to adjust the sewing speed.
Operation panel and operation keys
1 LCD (liquid crystal display)
Selected stitch pattern settings and messages are displayed.
(page 10)
2 Stitch width keys/Settings screen page selection
keys
Press to adjust the stitch width or to move to previous/next
pages in the settings screen.
3 Preset utility stitch/saved stitch pattern key
Press to select the utility stitch assigned to a numeric key or to
retrieve a stitch pattern that has been saved.
4 Utility stitch key
Press to select a utility stitch.
5 Decorative stitch key
Press to select a decorative stitch.
6 Character stitch key
Press to select a character stitch.
7 Back key
Press this key to cancel the operation and return to the
previous screen.
In addition, pressing this key removes the last stitch pattern
added when combining characters or decorative stitches.
8 Numeric keys
Use these keys to quickly select one of the ten most often used
stitches. When selecting other stitches, use these keys to type
in the number of the desired stitch.
9 OK key
Press to apply the selection or perform the operation.
0 Reset key
Press to reset the selected stitch to its original settings.
A Memory key
Press to save stitch pattern combinations to machine memory.
B Presser foot/Needle exchange key
Press this key before changing the needle, the presser foot,
etc. This key locks all key and button functions to prevent
operation of the machine.
C Back to beginning key
When sewing is stopped, press this key to return to the
beginning of the stitch pattern.
D Settings key
Press to select sewing settings or other settings, or to move to
next pages in the settings screen.
E Automatic thread cutting key
Press to select the automatic thread cutting function.
F Manual memory key
Press to save the adjusted stitch width and length settings.
G Automatic reverse/reinforcement key
Press to use the automatic reverse/reinforcement stitching
function.
H Value selection keys
Press to change the value of the selected item in the settings
screen.
I Stitch length keys/Item selection keys
Press to adjust the stitch length or to select the next/previous
items in the settings screen.
b
cd f
a
e
q
s
l
f
g
e
d
c
a
r
p
o
n
m
k
j
i
h
b
Note
The operation keys of this machine are capacitive touch
sensors. Operate the keys by directly touching them
with your finger.
The response of the keys varies according to the user.
The pressure exerted on the keys does not affect the
response of the keys.
Since the operation keys react differently depending on
the user, adjust the setting for “Adjusting input
sensitivity for operation keys” on page 12.
When using an electrostatic touch pen, make sure that
its point is 8 mm or more. Do not use a touch pen with a
thin point or a unique shape.
Names of Machine Parts
GETTING READY
7
1
Included accessories
Included accessories may differ from the table below depending on the machine model you purchased. For more details on
included accessories and their part codes of your machine, refer to the additional sheet “Included Accessories”.
Pull the top of the flat bed attachment to open the accessory compartment.
Included accessories
1. 2. 3. 4. 5. 6.
Zigzag foot “J” (on machine) Monogramming foot “N” Overcasting foot “G” Zipper foot “I” Blind stitch foot “R” Button fitting foot “M
7. 8. 9. 10. 11. 12.
Buttonhole foot “A Needle set
75/11 2 needles,
90/14 2 needles,
90/14 2 needles:
Ball point needle (gold
colored)
Twin needle
2/11 needle
Bobbin (4)
(One bobbin is on machine.)
Seam ripper Cleaning brush
13. 14. 15. 16. 17. 18.
Eyelet punch Disc-shaped screwdriver Screwdriver (large) Screwdriver (small) Extra spool pin Spool cap (large)
19. 20. 21. 22. 23. 24.
Spool cap (medium)
(on machine)
Spool cap (small) Spool net Bobbin case
(on machine)
Foot controller Accessory bag
25. 26. 27. 28.
Stitch pattern plate Stitch pattern plate holder Operation Manual Quick Reference Guide
Note
(For U.S.A. only) Foot controller: Model T
This foot controller can be used on the machine with product code 888-M70. The product code is mentioned on the
machine rating plate.
J
N
G
I
M
A
Names of Machine Parts
8
Optional accessories
The following are available as optional accessories to be
purchased separately.
Attaching the stitch pattern plate
The stitch pattern plate shows the stitches and the stitch
numbers. Attach the stitch pattern plate to the stitch pattern
plate holder, and then attach the stitch pattern plate holder to
the handle of the sewing machine as shown in the illustration
below.
(For models equipped with the hard case)
When storing the machine, the stitch pattern plate can be
hung from the hard case.
1. 2. 3.
4. 5. 6.
7. 8. 9.
10. 11.
No. Part Name
Part Code
Americas Europe Others
1. Quilting foot SA129 F005N:
XC1948-052
F005N
2. Walking foot SA140 F033N:
XG6623-001
F033N
F033CN
3. Quilting guide SA132 F016N:
XC2215-052
F016N
F016CN
4. Side cutter “S” SA177 F054:
XC3879-152
F054
F054CN
5. Adjustable zipper/
piping foot
SA161 F036N:
XC1970-052
F036N
6. Stitch guide foot
“P”
SA160 F035N:
XG6609-001
F035N
7. Non stick foot SA114 F007N:
XC1949-052
F007N
F007CN
8. Open toe foot SA186 F060:
XG6687-001
F060
9. 1/4" piecing foot SA125 F001N:
XC1944-052
F001N
10. 1/4" piecing foot
with guide
SA185 F057:
XC7416-252
F057
11. Wide table SAWT5 WT15:
XG8750-001
WT15AP
WT15CN
P
Memo
To obtain optional accessories or parts, contact your
authorized Brother dealer or visit our site http://
s.brother/cpjag/.
All specifications are correct at the time of printing.
Please be aware that some specifications may change
without notice.
A variety of feet are available to enable different types of
stitching and finishes. Visit your nearest authorized
Brother dealer or our site http://s.brother/cpjag/
for a
complete listing of optional accessories available for
your machine.
Always use accessories recommended for this
machine.
Turning the Machine On/Off
GETTING READY
9
1
a
Make sure that the machine is turned off (the main
power switch is set to “ ”), and then plug the power
cord into the power supply jack on the right side of the
machine.
b
Insert the plug of the power cord into a household
electrical outlet.
1 Power supply jack
2 Main power switch
c
Press the right side of the main power switch on the
right side of the machine to turn the machine on (set it
to “I”).
The light for working area and LCD will light up
when the machine is turned on. The needle and the
feed dogs will make a sound when they move; this is
not a malfunction.
d
To turn off the machine, press the left side of the main
power switch (set it to “ ”).
Turning the Machine On/Off
WARNING
Use only regular household electricity for the
power source. Using other power sources may
result in fire, electric shock, or damage to the
machine.
Make sure that the plugs on the power cord
are firmly inserted into the electrical outlet
and the power cord receptacle on the
machine. Otherwise, a fire or electric shock
may result.
Do not insert the plug on the power cord into
an electrical outlet that is in poor condition.
Turn the main power to OFF and remove the
plug in the following circumstances:
When you are away from the machine
After using the machine
When the power fails during use
When the machine does not operate correctly
due to a bad connection or a disconnection
During electrical storms
CAUTION
Use only the power cord included with this
machine.
Do not use extension cords or multi-plug
adapters with any other appliances plugged
into them. Fire or electric shock may result.
Do not touch the plug with wet hands. Electric
shock may result.
When unplugging the machine, always turn
the main power to OFF first. Always grasp the
plug to remove it from the electrical outlet.
Pulling on the cord may damage the cord, or
lead to fire or electric shock.
Do not allow the power cord to be cut,
damaged, modified, forcefully bent, pulled,
twisted, or bundled. Do not place heavy
objects on the cord. Do not subject the cord to
heat. These things may damage the cord, or
cause fire or electric shock. If the cord or plug
is damaged, take the machine to your
authorized Brother dealer for repairs before
continuing use.
Unplug the power cord if the machine is not to
be used for a long period of time. Otherwise, a
fire may result.
•(For U.S.A. only)
This appliance has a polarized plug (one blade
wider than the other). To reduce the risk of
electrical shock, this plug is intended to fit in a
polarized electrical outlet only one way.
If the plug does not fit fully in the electrical
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician to install the
proper electrical outlet. Do not modify the
plug in any way.
Note
When you first turn on the machine, select the language
of your choice, and then press .
1
2
LCD Operation
10
Viewing the LCD
When the machine is turned on, the LCD will light up and the following screen is displayed.
To change the displayed settings, use the operation keys.
LCD Operation
No. Display Item Name Explanation Page
1 Presser foot Shows the symbol for the presser foot to be used. Before sewing, attach one of the
presser feet shown here.
21
Zigzag foot “J” Blind stitch foot “R”
Monogramming foot “N” Button fitting foot “M”
Overcasting foot “G” Side cutter “S”
Buttonhole foot “A
* The symbols for certain presser feet, such as zipper foot “I” and the quilting foot,
may not appear in the screen.
2 - Stitch preview Shows a preview of the selected stitch. -
3 Stitch category Shows the category of the currently selected stitch pattern. 23
: Preset utility stitch
: Utility stitch
: Decorative stitch (category 1: Decorative stitches)
: Decorative stitch (category 2: Decorative satin stitches/Satin stitches/Cross
stitch stitches)
: Decorative stitch (category 3: Utility decorative stitches)
: Character stitch (Gothic font)
: Character stitch (Handwriting font)
: Character stitch (Outline)
: Character stitch (Japanese font)
4 Stitch number Shows the number of the currently selected stitch pattern. 35
5 Needle position setting Shows whether the needle is in the programmed raised or lowered position. In
addition, shows whether the single needle mode or twin needle mode is selected.
11
: Single needle/down position : Twin needle/down position
: Single needle/up position : Twin needle/up position
6 Single/repeat sewing Shows single or continuous stitch patterns sewing mode setting. 11
: Single sewing mode : Repeat sewing mode
7 Horizontal mirror image Appears when the stitch is mirrored. 11
8 Stitch width Shows the stitch width of the currently selected stitch pattern. 29
9 Stitch length Shows the stitch length of the currently selected stitch pattern. 29
0 Automatic reverse/
reinforcement stitching
Shows that the automatic reverse/reinforcement stitching is currently turned on. 27
A Automatic thread cutting Shows that the programmed thread cutting is currently turned on. 28
5
6
3
1
7
2
8 9 0
4
A
LCD Operation
GETTING READY
11
1
Settings screen
Press to change various sewing machine operations and
sewing settings.
Press to move to previous/next pages.
* You can also move to next pages by pressing .
Press to select the next/previous items.
Press to change the value of the selected item.
Press or , after you changed necessary settings.
1 Page number
2 Machine settings
3 Value
1 Use to check the stitch pattern when the specified stitch
pattern is not displayed on the screen.
2 Select the needle stop position (the needle position for
when the machine is not being operated) to be up or
down.
3 Set to [ON] when using twin needle. (page 54)
4 Select whether to use the sewing speed controller to
determine the zigzag width. (page 50)
5 Select either “01 Straight stitch (Left)” or “03 Straight
stitch (Middle)” as the utility stitch that is automatically
selected when the machine is turned on.
6 Changes the stitch length when satin stitches are
selected. The stitch length can be set to one of five
settings.
7 Changes the thread density when decorative satin
stitches are selected.
8 Changes the character spacing. The higher the setting,
the wider the character spacing will be; the lower the
setting, the narrower the character spacing will be.
9 Changes the stitch pattern size when character stitches
(except handwriting font) are selected.
0 When set to [ON], a mirror image of the selected stitch
pattern can be sewn.
A Select whether combined stitch patterns are sewn
repeatedly or once.
With repeat sewing, the stitch pattern is repeatedly sewn
until the machine is stopped. With single sewing, the
machine stops after all of the displayed stitch patterns
have been sewn once.
B Adjusts the up and down position of the stitch pattern.
(page 55)
C Select whether to hear the beep operation sound.
D Select whether to turn work area light on or off.
E Adjusts the brightness of the LCD.
2
1
3
1
2
3
4
5
6
7
8
9
0
A
B
C
D
E
Winding/Installing the Bobbin
12
F When set [ON], reinforcement stitches are sewn at the
beginning and/or end of sewing for a reinforcement
stitch pattern, even when the reverse button is pressed.
(page 27)
G Select the level of the input sensitivity for operation keys.
(page 12)
H Selects the display language.
I Displays the program version.
Adjusting input sensitivity for operation keys
You can adjust the sensitivity of the operation keys to 5 levels.
Display the settings screen to set desired level.
a
Press , display the seventh page of the settings
screen, and then press to select (Input
Sensitivity).
b
Adjust the input sensitivity by pressing .
The higher the setting, the more sensitive the keys will
be. The default setting is [3].
We recommend selecting the highest setting if an
electrostatic touch pen is being used.
While adjusting the input sensitivity, press any of the
numeric keys to check the sensitivity. When the key
responds, the setting value indicating the sensitivity
blinks.
If the machine does not respond when an
operation key is pressed
Turn machine off, then hold down (Needle position
button) and turn on the machine to reset the settings.
Display the settings screen, and then adjust the settings
again.
Winding the bobbin
This section describes how to wind thread onto a bobbin.
a
Place the bobbin on the bobbin winder shaft so that the
notch in the bobbin aligns with the spring on the shaft,
and then slide the bobbin winder shaft to the right until
it snaps into place.
F
G
H
I
Winding/Installing the Bobbin
CAUTION
Only use the plastic bobbin that comes with
this machine or bobbins of the same type
(SA156/SFB: XA5539-151/SFB). The bobbin's
height is 11.5 mm (approx. 7/16 inch). Using
other bobbins may cause damage to the
machine. SA156 is Class 15 type bobbin.
Bobbins previously manufactured may not
have the “b” mark on the bobbin. However,
they can be used with this machine if they are
the same type (SA156/SFB: XA5539-151/SFB).
1 Notch in the
bobbin
2 Bobbin winder
shaft spring
Memo
Checking the installation orientation of the bobbin will
be helpful in later procedures. By placing the bobbin
into the bobbin case in the same orientation that it was
on the bobbin winder shaft, the bobbin can be installed
with the correct winding direction of the bobbin thread.
The “b” mark on one side of the bobbin included with
this machine can be used as a reference.
2
1
Winding/Installing the Bobbin
GETTING READY
13
1
b
Remove the spool cap and place the spool of thread for
the bobbin onto the spool pin.
Slide the spool onto the spool pin so that the thread
unwinds to the front from the bottom. Otherwise the
thread may become tangled around the spool pin.
1 The thread unwinds to the front from the bottom.
c
Slide the spool cap onto the spool pin.
Slide the spool cap as far as possible to the right, as
shown, with the rounded side on the left.
d
Pass the thread under the thread guide, then under the
thread guide cover and to the front.
1 Thread guide
2 Thread guide cover
e
Pass the thread under the hook on the bobbin winding
thread guide, and then wind it counterclockwise under
the pretension disk.
1 Bobbin winding thread guide
2 Pretension disk
3 Pull it in as far as possible
f
Wind the thread clockwise around the bobbin 5 or 6
times, pass the thread through the guide slit in the
bobbin winder seat, and then pull the thread to cut it.
1 Guide slit in bobbin winder seat
(with built-in cutter)
CAUTION
If the spool or the spool cap is not installed
correctly, the thread may become tangled
around the spool pin, causing the needle to
break.
Three spool cap sizes are available, allowing
you to choose a spool cap that best fits the size
of spool being used. If the spool cap is too
small for the spool being used, the thread may
catch on the slit in the spool or the machine
may be damaged.
For more information, refer to “Memo” on
page 13.
Memo
When using the spool as shown below, use the small
spool cap, and leave a small space between the cap
and the spool.
When using thread that winds off quickly, such as
transparent nylon thread or metallic thread, place the
spool net over the spool before placing the spool of
thread onto the spool pin.
If the spool net is too long, fold it to fit the size of the
spool.
1
1 Spool cap (small)
2 Spool (cross-wound
thread)
3 Space
2
1
3
Note
Make sure that the thread is passed under the
pretension disk.
Note
Be sure to wind the thread clockwise around the
bobbin, otherwise the thread will become wrapped
around the bobbin winder shaft.
CAUTION
Be sure to cut the thread as described. If the
bobbin is wound without cutting the thread
using the cutter built into the guide slit in the
bobbin winder seat, the thread may become
tangled in the bobbin or the needle may bend
or break when the bobbin thread starts to run
out.
a
b
1
2
3
a
Winding/Installing the Bobbin
14
g
Slide the sewing speed controller to adjust the bobbin
winding speed. Slide the controller to the right to
increase the speed; slide it to the left to reduce the
speed.
h
Turn on the machine.
i
Press the “Start/Stop” button once to start winding the
bobbin.
When the foot controller is plugged in, press down on
the foot controller.
j
When the bobbin winding becomes slow, press the
“Start/Stop” button once to stop the machine.
When the foot controller is plugged in, remove your
foot from the foot controller.
k
Cut the thread, slide the bobbin winder shaft to the left
until it snaps into place, and then remove the bobbin.
l
Slide the sewing speed controller to desired sewing
speed position.
m
Remove the spool for the bobbin thread from the spool
pin.
Installing the bobbin
Install the bobbin wound with thread.
You can begin sewing immediately without pulling up the
bobbin thread by simply inserting the bobbin in the bobbin
case and guiding the thread through the slit in the needle
plate cover.
a
Turn on the machine.
b
Press (Needle position button) once or twice to
raise the needle.
c
Lower the presser foot lever.
d
Press .
If is pressed while the presser foot is raised, an
error message appears. Lower the presser foot lever
and press again.
The screen changes, and all keys and operation
buttons are locked (except ).
e
Raise the presser foot lever.
Memo
We recommend winding stretch thread, such as
transparent nylon thread, at a low speed since the
thread may stretch.
Note
When winding transparent nylon thread on the bobbin,
stop bobbin winding when the bobbin is 1/2 to 2/3 full. If
the bobbin was fully wound with transparent nylon
thread, it may not be wound neatly, or sewing
performance may suffer. In addition, extreme pressure
may be applied to the bobbin, it may not be possible to
remove the bobbin from the bobbin winder shaft, or the
bobbin may break.
CAUTION
When the bobbin winding becomes slow, stop
the machine, otherwise the machine may be
damaged.
Memo
If the threads will be pulled to create gathers or the
thread at the beginning of sewing will be finished, for
example, when free motion quilting, first pull up the
bobbin thread.
For details, refer to “Pulling up the bobbin thread” on
page 18.
CAUTION
Use a bobbin that has been correctly wound
with thread, otherwise the needle may break
or the thread tension will be incorrect.
Before inserting or changing the bobbin, be
sure to press on the operation panel to
lock all keys and buttons, otherwise injuries
may occur if the “Start/Stop” button or any
other button is pressed and the machine starts.
Winding/Installing the Bobbin
GETTING READY
15
1
f
Slide the bobbin cover latch to the right and remove
the bobbin cover.
g
Place the bobbin in the bobbin case so that the thread
unwinds to the left.
h
Lightly hold down the bobbin with your right hand
(1), and then guide the end of the thread around the
tab of the needle plate cover with your left hand (2).
i
While lightly holding down the bobbin with your right
hand (1), guide the thread through the slit in the
needle plate cover (2) and lightly pull it with your left
hand (3).
j
While lightly holding down the bobbin with your right
hand (1), continue guiding the thread through the slit
with your left hand (2). Then, cut the thread with the
cutter (3).
k
Reattach the bobbin cover.
Insert the tab of the bobbin cover into the notch of the
needle plate cover, and then lightly press down on the
right side.
l
Press to unlock all keys and buttons.
Memo
For the correct winding direction of the bobbin thread,
be sure to place the bobbin into the bobbin case in the
same orientation that it was on the bobbin winder shaft.
The “b” mark on one side of the bobbin included with
this machine can be used as a reference.
1 Tab
CAUTION
Be sure to hold down the bobbin with your
finger and unwind the bobbin thread
correctly, otherwise the thread may break or
the thread tension will be incorrect.
Memo
By guiding the thread around the tab of the needle plate
cover, passing the thread as shown by 2 in this
illustration, then lightly pulling the thread at 3, the
thread will enter the tension spring of the bobbin case to
apply the appropriate tension to the bobbin thread
during sewing.
Memo
Be sure to complete the bobbin threading correctly
according to these instructions. If the thread is simply
placed in the slit in the needle plate cover, the bobbin
thread will not be correctly threaded, resulting in poor
sewing performance or incorrect thread tension.
Memo
You can begin sewing without pulling up the bobbin
thread. If you wish to pull up the bobbin thread before
starting to sew, pull up the thread according to the
procedure in “Pulling up the bobbin thread” on page 18.
Upper Threading
16
Threading the upper thread
When threading the upper thread, carefully follow
the instructions.
a
Turn on the machine.
b
Press (Needle position button) once or twice to
raise the needle.
The needle is correctly raised when the mark on the
handwheel is at the top, as shown below. Check the
handwheel and, if this mark is not at this position, press
(Needle position button) until it is.
c
Lower the presser foot lever to lower the presser foot.
d
Press .
If is pressed while the presser foot is raised, an
error message appears. Lower the presser foot lever
and press again.
The screen changes, and all keys and operation
buttons are locked (except ).
e
Raise the presser foot lever to raise the presser foot.
f
Remove the spool cap and place the spool of thread
onto the spool pin.
Slide the spool onto the spool pin so that the thread
unwinds to the front from the bottom. Otherwise the
thread may become tangled around the spool pin.
1 The thread unwinds to the front from the bottom.
g
Slide the spool cap onto the spool pin.
Slide the spool cap as far as possible to the right, as
shown, with the rounded side on the left.
Upper Threading
CAUTION
When threading the upper thread, carefully
follow the instructions. If the upper threading
is not correct, the thread may become tangled
or the needle may bend or break.
Never use a thread weight of 20 or lower.
Use the needle and the thread in the correct
combination. (page 19)
CAUTION
When threading the needle, be sure to press
on the operation panel to lock all keys
and buttons, otherwise injuries may occur if
the “Start/Stop” button or any other button is
pressed and the machine starts.
Note
If the presser foot is not raised, the machine cannot be
threaded.
CAUTION
Choose a spool cap that best fits the size of
spool being used. For more information
regarding the choice of spool caps for your
thread choice, refer to “Memo” on page 13.
If the spool or the spool cap is not positioned
correctly, the thread may become tangled
around the spool pin or the needle may break.
1
Upper Threading
GETTING READY
17
1
h
Pass the thread under the thread guide, then under the
thread guide cover and to the front.
Hold the thread with your right hand so that there is no
slack in the thread that is pulled out, and then pass the
thread under the thread guide cover with your left hand.
1 Thread guide
2 Thread guide cover
i
Pass the thread through the thread channel in the order
shown below.
j
Make sure that the thread is passed into the thread
take-up lever as shown below.
k
Slide the thread behind the needle bar thread guide.
The thread can easily be slid behind the needle bar
thread guide by holding the thread in your left hand,
then feeding the thread with your right hand, as shown.
Make sure that the thread is passed through to the left of
the tab of the needle bar thread guide.
l
Check that the needle and thread are compatible with
the needle threader. If they are compatible, continue
with the next step.
The needle threader can be used with machine
needles 75/11 through 100/16.
The needle threader cannot be used with the wing
needle or the twin needle.
When thread such as transparent nylon
monofilament or specialty threads are used, it is not
recommended to use the needle threader.
If the needle threader cannot be used, insert the
thread through the eye of the needle from front to
back by hand. At this time, be sure to lock all keys
and operation buttons described in step
d.
m
Pull the end of the thread, which has been passed
through the needle bar thread guide, to the left, pass
the thread under the notch, and then firmly pull the
thread to fully insert it from front to back into the slit
of the thread guide disk (marked “7”).
1 Notch of the threader thread guide
2 Threader thread guide disk
n
Cut the thread with the thread cutter on the left side of
the machine.
o
Lower the presser foot lever to lower the presser foot.
1 Needle bar thread
guide
2 Tab
a
b
1
2
Note
If the thread is pulled through and cannot be cut
correctly, lower the presser foot lever so that the thread
is held in place before cutting the thread. If this
operation is performed, proceed to step
o.
When using thread that quickly winds off the spool,
such as metallic thread, it may be difficult to thread the
needle if the thread is cut.
Therefore, instead of using the thread cutter, pull out
about 8 cm (approx. 3 inches) of thread after passing it
through the threader thread guide disk (marked “7”).
1
2
Upper Threading
18
p
Lower the needle threader lever on the left side of the
machine as much as possible to make the hook turn.
After the threader thread guide disk is lowered (1), the
hook turns (2).
1 Needle threader lever
2 Needle
3 Hook
q
Raise the needle threader lever slowly.
r
Carefully pull the end of thread that was passed
through the eye of the needle.
If the needle was not completely threaded, but a loop in
the thread was formed in the eye of the needle, carefully
pull the loop through the eye of the needle to pull out
the end of the thread.
s
Raise the presser foot lever, pass the end of the thread
through and under the presser foot, and then pull out
about 5 cm (approx. 2 inches) of thread toward the
rear of the machine.
t
Press to unlock all keys and buttons.
Pulling up the bobbin thread
If the threads will be pulled to create gathers or the thread at
the beginning of sewing will be finished, for example, when
free motion quilting, first pull up the bobbin thread.
a
Refer to “Threading the upper thread” on page 16 to
thread the machine with the upper thread and thread
the needle.
b
Follow steps a to g “Installing the bobbin” on
page 14 for installing the bobbin and to insert the
bobbin into the bobbin case.
c
Pass the bobbin thread through the slot.
Do not cut the thread with the cutter, otherwise it will
be difficult to pull up the bobbin thread.
d
Press to unlock all keys and buttons.
e
While lightly holding the upper thread with your left
hand, press (Needle position button) twice to lower
and then raise the needle.
The bobbin thread is looped around the upper thread
and can be pulled up.
f
Carefully pull the upper thread upward to pull out the
end of the bobbin thread.
g
Pull up the bobbin thread, pass it under the presser
foot and pull it about 10 cm (4 inches) toward the back
of the machine, making it even with the upper thread.
h
Reattach the bobbin cover.
Note
If the needle is not raised to it's highest position, the
needle threader cannot thread the needle. Turn
handwheel counterclockwise until the needle is at its
highest position. The needle is correctly raised when the
mark on the handwheel is at the top, as shown under
step
b on page 16.
1
2
3
Fabric/Thread/Needle Combinations
GETTING READY
19
1
Needles that can be used with this machine: Home sewing machine needles (size 65/9 - 100/16)
* The larger the number, the larger the needle. As the numbers decrease, the needles get finer.
Thread that can be used with this machine: 30 - 90 weight
* Never use thread of 20 weight or lower. It may cause machine to malfunction.
* The smaller the number, the heavier the thread. As the numbers increase, the thread gets finer.
The machine needle and thread that should be used depends on the type and thickness of the fabric. Refer to
the following table when choosing the thread and needle appropriate for the fabric that you wish to sew.
- The combinations shown in the table provide a general guideline. Be sure to sew trial stitches on the actual number of
layers and type of fabric to be used in your project.
- The machine needles are consumables. For safety and best results, we recommend replacing the needle regularly. For
details on when to replace the needle, refer to “Checking the needle” on page 20.
In principle, use a fine needle and thread with lightweight fabrics, and a larger needle and heavier thread with
heavyweight fabrics.
Select a stitch appropriate for the fabric, and then adjust the stitch length. When sewing lightweight fabrics,
make the stitch length finer (shorter). When sewing heavyweight fabrics, make the stitch length coarser
(longer). (page 29)
When sewing stretch fabrics, refer to “Sewing stretch fabrics” on page 32.
Transparent nylon thread
Use a home sewing machine topstitching needle, regardless of the fabric or thread.
Sewing character stitch patterns and decorative stitch patterns (needles and threads)
When sewing lightweight, medium weight or stretch fabrics, use a ball point needle (gold colored) 90/14. When sewing
heavyweight fabrics, use a home sewing machine needle 90/14.
In addition, #50 to #60 thread should be used.
Fabric/Thread/Needle Combinations
Fabric Type/Application
Thread
Size of needle
Stitch length
mm (inch)
Type Weight
Lightweight
fabrics
Lawn, georgette, challis, organdy,
crepe, chiffon, voile, gauze, tulle,
lining, etc.
Polyester
thread
60 - 90
65/9 - 75/11
Fine stitches
1.8-2.5
(1/16-3/32)
Cotton thread,
Silk thread
50 - 80
Medium weight
fabrics
Broadcloth, taffeta, gabardine,
flannel, seersucker, double gauze,
linen, terry cloth, waffle weave,
sheeting, poplin, cotton twill, satin,
quilting cotton, etc.
Polyester
thread
60 - 90
75/11 - 90/14
Regular stitches
2.0-3.0
(1/16-1/8)
Cotton thread,
Silk thread
50 - 60
Heavyweight
fabrics
Denim (12 ounces or more), canvas,
etc.
Polyester
thread,
Cotton thread
30 100/16
Coarse stitches
2.5-4.0
(3/32-3/16)
Denim (12 ounces or more), canvas,
tweed, corduroy, velour, melton
wool, vinyl-coated fabric, etc.
Polyester
thread
60
90/14 - 100/16
Cotton thread,
Silk thread
30 - 50
Stretch fabrics
(knit fabrics, etc.)
Jersey, tricot, T-shirt fabric, fleece,
interlock, etc.
Polyester thread,
Cotton thread,
Silk thread
50
Ball point needle
75/11 - 90/14
Setting appropriate for
the fabric thickness
For top-stitching
Polyester thread,
Cotton thread
30 90/14 - 100/16
Setting appropriate for
the fabric thickness
50 - 60 75/11 - 90/14
CAUTION
The appropriate fabric, thread and needle combinations are shown in the preceding table. If the
combination of the fabric, thread and needle is not correct, particularly when sewing heavy fabrics (such
as denim) with thin needles (such as 65/9 to 75/11), the needle may bend or break. In addition, the
stitching may be uneven or puckered or there may be skipped stitches.
Replacing the Needle
20
Checking the needle
Before using the needle, place the flat side of the needle on a
flat surface and check that the distance between the needle
and the flat surface is even.
Replacing the needle
Use the screwdriver and a new needle that has been
determined to be straight according to the instructions in
“Checking the needle” on page 20.
a
Press (Needle position button) once or twice to
raise the needle.
b
Place fabric or paper under the presser foot to cover
the hole in the needle plate to prevent the needle from
falling into the machine.
c
Lower the presser foot lever.
d
Press .
If is pressed while the presser foot is raised, an
error message appears. Lower the presser foot lever
and press again.
The screen changes, and all keys and operation
buttons are locked (except ).
e
Hold the needle with your left hand, and then use a
screwdriver to turn the needle clamp screw toward
you (counterclockwise) to remove the needle.
Do not apply a strong force when loosening or
tightening the needle clamp screw, otherwise certain
parts of the machine may be damaged.
f
With the flat side of the needle toward the rear of the
machine, insert the new needle until it touches the
needle stopper. Using the screwdriver tighten the
needle clamp screw by turning it clockwise.
g
Press to unlock all keys and buttons.
Replacing the Needle
CAUTION
Only use recommended home sewing machine
needles. Use of any other needle may bend the
needle or damage the machine.
Never use bent needles. Bent needles can
easily break, possibly resulting in injuries.
1 Flat side
2 Needle type marking
3 Flat surface
4 Even
5 Not even
Note
The machine needles are consumables. Replace the
needle in cases such as those described below.
- If an unusual sound is produced when the needle
enters the fabric. (The tip of the needle may be broken
or dull.)
- If stitches are skipped. (The needle may be bent.)
- Generally, after completing one project, such as a
piece of clothing.
1
2
c
d
e
CAUTION
When replacing the needle, be sure to press
on the operation panel to lock all keys
and buttons, otherwise injuries may occur if
the “Start/Stop” button or any other button is
pressed and the machine starts.
1 Needle stopper
CAUTION
Be sure to insert the needle until it touches the
needle stopper and securely tighten the needle
clamp screw with the screwdriver, otherwise
the needle may break or damage may result.
1
Replacing the Presser Foot
GETTING READY
21
1
Replacing the presser foot
a
Press (Needle position button) once or twice to
raise the needle.
b
Lower the presser foot lever.
c
Press .
If is pressed while the presser foot is raised, an
error message appears. Lower the presser foot lever
and press again.
The screen changes, and all keys and operation
buttons are locked (except ).
d
Raise the presser foot lever.
e
Press the black button at the back of the presser foot
holder in order to remove the presser foot.
f
Place the appropriate presser foot below the presser
foot holder so that the presser foot pin is aligned with
the notch in the presser foot holder.
g
Slowly lower the presser foot lever so that the presser
foot pin snaps into the notch in the presser foot holder.
1 Presser foot lever
2 Presser foot holder
3 Notch in the presser foot holder
4 Presser foot pin
The presser foot is attached.
h
Raise the presser foot lever to check that the presser
foot is securely attached.
i
Press to unlock all keys and buttons.
Replacing the Presser Foot
CAUTION
Use the appropriate presser foot for the type
of stitch that you wish to sew, otherwise the
needle may hit the presser foot, causing the
needle to bend or break. For details on the
presser foot that should be used with the
selected stitch, refer to “Stitch Chart” on
page 35.
Only use presser feet designed specifically for
this machine. Use of any other presser foot
may result in injuries or damage to the
machine.
Note
When a stitch is selected, the symbol for the presser
foot that should be used is shown in the LCD. Check
that the appropriate presser foot is attached before
starting to sew. If the wrong presser foot is attached,
attach the appropriate presser foot.
For details on the presser foot indications, refer to
“Viewing the LCD” on page 10.
* The symbols for certain presser feet, such as zipper foot “I”
and the quilting foot, may not appear in the screen.
CAUTION
When replacing the presser foot, be sure to
press on the operation panel to lock all
keys and buttons, otherwise injuries may occur
if the “Start/Stop” button or any other button
is pressed and the machine starts.
1 Black button
2 Presser foot holder
1 Presser foot holder
2 Notch in the presser foot
holder
3 Presser foot pin
4 Presser foot type
a
b
J
1
4
2
3
a
b
c
d
Replacing the Presser Foot
22
Removing and attaching the presser foot
holder
Remove the presser foot holder when cleaning the machine or
when installing a presser foot that does not use the presser
foot holder, such as the walking foot and quilting foot.
Removing the presser foot holder
a
Lower the presser foot lever.
b
Press .
If is pressed while the presser foot is raised, an
error message appears. Lower the presser foot lever
and press again.
The screen changes, and all keys and operation
buttons are locked (except ).
c
Remove the presser foot.
For details, refer to “Replacing the presser foot” on
page 21.
d
Use the screwdriver to loosen the presser foot holder
screw.
Turn the screw toward the back of the machine
(counterclockwise).
The presser foot holder screw can also be loosened
or tightened with the disc-shaped screwdriver.
e
Press to unlock all keys and buttons.
Attaching the presser foot holder
a
Lower the presser foot lever.
b
Press .
If is pressed while the presser foot is raised, an
error message appears. Lower the presser foot lever
and press again.
The screen changes, and all keys and operation
buttons are locked (except ).
c
Raise the presser foot lever.
d
Align the notch in the presser foot holder with the
screw.
e
Hold the presser foot holder in place with your right
hand, and then tighten the screw using the screwdriver
in your left hand.
Turn the screw toward you (clockwise).
f
Press to unlock all keys and buttons.
1 Screw
2 Notch in presser foot
holder
CAUTION
Be sure to securely tighten the presser foot
holder screw, otherwise the presser foot
holder may fall off and the needle may strike
it, causing the needle to bend or break.
a
b
Sewing
23
SEWING BASICS
2
Selecting a stitch pattern
A stitch can be selected from the following methods available.
Stitch patterns can be selected through either direct select (by
pressing the designated key for a specific stitch) or number
selection (by entering the number for the stitch pattern).
Direct selection
With direct selection, there are two stitch modes listed
below. Each press of switches the modes.
Preset utility stitch
Saved stitch patterns
1 Preset utility stitch/saved stitch pattern key
2 Numeric keys
a
Check that appears in the upper-left corner of the
screen.
If a different symbol is displayed, press .
b
Press the numeric key on which the desired stitch is
printed.
The selected stitch is displayed on the LCD screen.
For details on the stitch patterns assigned to the
numeric keys, refer to “Preset utility stitches” on
page 39.
Number selection
After selecting a stitch category, use the numeric keys to
type in the number for the desired stitch.
1 Utility stitch key
2 Decorative stitch key
3 Character stitch key
4 Numeric keys
a
Select the category for the desired stitch.
For utility stitches, press .
For decorative stitch patterns, each press of
changes the decorative stitch category.
...
For character stitch patterns, each press of
changes the font.
...
The symbol for the selected category appears in the
upper-left corner of the screen.
Chapter 2
SEWING BASICS
Sewing
CAUTION
While the machine is in operation, pay special
attention to the needle location. In addition,
keep your hands away from all moving parts
such as the needle and handwheel, otherwise
injuries may occur.
Do not pull or push the fabric too hard while
sewing, otherwise injuries may occur or the
needle may break.
Never use bent needles. Bent needles can
easily break, possibly resulting in injuries.
Make sure that the needle does not strike
basting pins, otherwise the needle may break
or bend.
The most frequently used utility stitches have been
assigned to the numeric keys.
These stitches can be selected simply by pressing
the designated key.
Frequently used stitch patterns and combined stitch
patterns can be saved on the machine’s memory and
easily retrieved using (Preset utility stitch/saved
stitch pattern key). For details, refer to “Using The
Memory Function” on page 56.
1
2
1
4
2
3
Sewing
24
b
Enter the number of the desired stitch using numeric
keys.
For number of each stitch, refer to “Stitch Chart” on
page 35.
For stitches 01 through 09, the stitch can also be
selected by using the numeric keys to type in a one-
digit number, then pressing .
For character stitch patterns 01 through 99 in the
(Japanese font) category, the stitch can also be
selected by using the numeric keys to type in a one-
or two-digit number, then pressing . (Example:
For the stitch 001, pressing and then pressing
.)
The selected stitch is displayed on the LCD screen.
When using one-digit numbers and it is entered
incorrectly, press to erase the entered number.
Combining Stitch Patterns
Stitch patterns from the following categories can be
combined.
Example:
a
Press .
b
Use the numeric keys to type in the number for the
desired stitch pattern.
The selected stitch pattern appears in the screen.
c
Press .
d
Use the numeric keys to type in the number for the
desired stitch pattern.
If the wrong character was selected, press . Each
press removes the last character in the selected text.
e
If you want to sew the stitch pattern continuously,
press , and then display the fourth page of the
settings screen.
f
Set (Single/Repeat) to (repeat sewing).
The combined stitch patterns will be sewn
repeatedly.
Note
If repeated sewing is set, the stitch pattern is repeatedly
sewn until the sewing machine is stopped.
If the sewing machine is turned off, the repeated/single
sewing setting returns to its default setting.
If you want to sew the stitch pattern continuously, select
(Check) in the settings screen. Press ,
and confirm the stitch pattern.
Memo
When sewing is completed, trim any excess thread
between characters.
Sewing
25
SEWING BASICS
2
Basic sewing
a
Prepare the appropriate needle and thread for the type
of fabric. (page 19)
If necessary, replace the needle. (page 20)
b
Wind thread onto a bobbin, and then install it into the
machine. (page 12)
c
Thread the upper thread. (page 16)
d
Select a stitch pattern.
For details on selecting a stitch pattern, refer to
“Selecting a stitch pattern” on page 23.
The number for the selected stitch pattern appears on
the screen.
For details on the built-in stitch patterns, refer to
“Stitch Chart” on page 35.
If necessary, change the stitch width or stitch length.
(page 29)
e
Check the symbol for the presser foot shown in the
LCD, and then attach the appropriate presser foot.
Attach zigzag foot “J” in this procedure. (It is on the
machine when purchased.)
For details on changing the presser foot, refer to
“Replacing the Presser Foot” on page 21.
f
Set the fabric under the presser foot. Hold the fabric
and thread with your left hand, and rotate the
handwheel counterclockwise or press (Needle
position button) to set the needle in the sewing start
position.
g
Lower the presser foot lever.
h
Adjust the sewing speed with the sewing speed
controller.
You can use this controller to adjust sewing speed
during sewing.
i
Press the “Start/Stop” button to start sewing. (When
the foot controller is plugged in, slowly press down on
the foot controller.)
Guide the fabric lightly by hand.
j
Press the “Start/Stop” button again to stop sewing.
(When the foot controller is plugged in, remove your
foot from the foot controller.)
Note
First, perform a trial sewing, using a piece of fabric and
thread that are the same as those used for your project.
CAUTION
Always use the appropriate presser foot. If the
wrong presser foot is used, the needle may
strike the presser foot and bend or break,
possibly resulting in injury.
Refer to “Stitch Chart” on page 35 for presser
foot recommendations.
1 Fast
2 Slow
Memo
When the foot controller is being used, you cannot start
sewing by pressing the “Start/Stop” button.
a
b
Sewing
26
k
Press (Thread cutter button) to trim the upper and
bobbin threads.
The needle will return to the up position
automatically.
l
Raise the presser foot lever, and then remove the
fabric.
m
Check the sewing finish. If necessary, adjust the thread
tension. (page 30)
Using the foot controller
You can also use the foot controller to start and stop
sewing.
a
Turn off the machine.
b
Insert the foot controller plug into the foot controller
jack on the machine.
c
Turn on the machine.
d
Slowly depress the foot controller to start sewing.
e
Release the foot controller to stop the machine.
CAUTION
Do not press (Thread cutter button) after
the threads have been cut. Doing so could
tangle the thread or break the needle and
damage the machine.
Do not press (Thread cutter button) when
there is no fabric set in the machine. The
thread may tangle, possibly resulting in
damage.
Note
When cutting thread such as nylon monofilament
thread, or other decorative threads, use the thread
cutter on the left side of the machine.
Memo
When the foot controller is connected, you cannot use
the “Start/Stop” button.
Bobbin winding can be started and stopped with the
foot controller.
1 Foot controller jack
Memo
The speed that is set using the sewing speed controller
will be the foot controller’s maximum sewing speed.
1
Sewing
27
SEWING BASICS
2
Sewing reverse/reinforcement stitches
Reverse/reinforcement stitches are generally necessary at the
beginning and end of sewing.
With reinforcement stitches, 3 to 5 stitches are sewn at the
same place. With reverse stitches, the stitching is sewn in the
opposite direction.
Depending on the selected stitch, reverse or reinforcement
stitches are sewn while (Reverse stitch button) is pressed
continuously.
1 Reverse stitch
2 Reinforcement stitch
3 (Reverse stitch button)
4 (Reinforcement stitch button)
Automatic reverse/reinforcement stitching
After selecting a stitch pattern, turn on the automatic reverse/
reinforcement stitching function before sewing, and the
machine will automatically sew reinforcement stitches (or
reverse stitches, depending on the stitch pattern) at the
beginning and end of sewing.
If the machine is turned off, automatic reverse/reinforcement
stitching will be turned off.
a
Select a stitch.
For details on selecting a stitch, refer to “Basic
sewing” on page 25.
b
Press to set the automatic reverse/reinforcement
stitching function.
appears in the LCD.
c
Set the fabric in the start position and press the “Start/
Stop” button to begin sewing.
1 Reverse stitches (or reinforcement stitches)
The machine will automatically sew reverse stitches
(or reinforcement stitches) and then continue sewing.
d
Once you have reached the end of the stitching, press
(Reverse stitch button) or (Reinforcement stitch
button).
1 Reverse stitches (or reinforcement stitches)
The machine will sew reverse stitches (or
reinforcement stitches) and stop.
Memo
When a reverse stitch pattern or reinforcement stitch
pattern is selected, pressing (Reverse stitch button)
continuously will sew reverse stitches.
When any other stitch is selected, pressing (Reverse
stitch button) continuously will sew reinforcement
stitches.
For details, refer to “Stitch Chart” on page 35.
Pressing (Reinforcement stitch button) continuously
sews 3 to 5 stitches at the same place when any stitch
pattern is selected.
Memo
While pressing (Reinforcement stitch button) when
sewing character/decorative stitch pattern, you can
stop sewing with one stitch pattern completed instead
of at the midpoint of a stitch pattern.
The green LED beside (Reinforcement stitch button)
lights up while a stitch is being sewn. The LED goes off
when sewing of the reinforcement stitch is finished.
a
b
cd
Sewing
28
The operation performed when either of these buttons is
pressed differs depending on the selected stitch pattern. Refer
to the following table for details on the operation that is
performed when the button is pressed.
* If (Reinforcement priority) in the settings screen
is set to [ON], reinforcement stitches are sewn
instead of reverse stitches.
Automatically cutting the thread
The machine can be set to automatically cut the threads at the
end of the stitching. This is called “programmed thread
cutting”. If programmed thread cutting is set, automatic
reverse/reinforcement stitching is also set.
If the machine is turned off, programmed thread cutting will
be turned off.
a
Turn on the machine.
b
Select a stitch.
For details on selecting a stitch, refer to “Basic
sewing” on page 25.
Reverse stitch
button
Reinforcement
stitch button
When the automatic
reverse/
reinforcement
stitching function is
not active with a
reverse stitch pattern
selected:
Machine sews
reverse stitches
while holding the
button.
Machine sews 3 - 5
reinforcement
stitches while
holding the button.
When the automatic
reverse/
reinforcement
stitching function is
not active with a
reinforcement stitch
pattern selected:
Machine sews
reverse stitches
while holding the
button.
*
Machine sews 3 - 5
reinforcement
stitches while
holding the button.
When the automatic
reverse/
reinforcement
stitching function is
not active with a
stitch other than
reverse or
reinforcement stitch
pattern selected.
Machine sews 3 - 5
reinforcement
stitches while
holding the button.
Machine sews 3 - 5
reinforcement
stitches while
holding the button.
When the automatic
reverse/
reinforcement
stitching function is
not active with a
character/decorative
stitch pattern
selected.
Machine sews
reinforcement
stitches while
holding the button.
Machine sews
reinforcement
stitches after
completing the stitch
pattern, when the
button is pressed.
When the automatic
reverse/
reinforcement
stitching function is
active with a reverse
stitch pattern
selected:
Machine sews
reverse stitches and
stops sewing when
the button is
pressed.
(At the beginning of
sewing, reverse
stitches are sewn
automatically when
“Start/Stop” button
is pressed.)
Machine sews
reinforcement
stitches and stops
sewing when the
button is pressed.
(At the beginning of
sewing, reverse
stitches are sewn
automatically when
“Start/Stop” button
is pressed.)
When the automatic
reverse/
reinforcement
stitching function is
active with a
reinforcement stitch
pattern selected:
Machine sews
reverse stitches and
stops sewing when
the button is
pressed.
*
(At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.)
Machine sews
reinforcement
stitches and stops
sewing when the
button is pressed.
(At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.)
When the automatic
reverse/
reinforcement
stitching function is
active with a stitch
other than reverse or
reinforcement stitch
pattern selected.
Machine sews
reinforcement
stitches and stops
sewing when the
button is pressed.
(At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.)
Machine sews
reinforcement
stitches and stops
sewing when the
button is pressed.
(At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.)
When the automatic
reverse/
reinforcement
stitching function is
active with a
character/decorative
stitch pattern
selected.
Machine sews
reinforcement
stitches and stops
sewing when the
button is pressed.
(At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.)
Machine sews
reinforcement
stitches and stops
sewing after
completing the stitch
pattern, when the
button is pressed.
(At the beginning of
sewing,
reinforcement
stitches are sewn
automatically when
“Start/Stop” button
is pressed.)
Memo
Some stitches, such as buttonholes and bar tacks,
require reinforcement stitches at the beginning of
sewing. If you select one of these stitches, the machine
will automatically turn on this function ( appears on
the LCD when the stitch is selected).
Reverse stitch
button
Reinforcement
stitch button
Sewing
29
SEWING BASICS
2
c
Press .
and appear in the LCD, and the machine is
set for programmed thread cutting and automatic
reverse/reinforcement stitching.
To turn programmed thread cutting off, press .
d
Set the fabric in place, and press the “Start/Stop
button once.
Stitching will begin after reverse stitches (or
reinforcement stitches) are sewn automatically.
e
Once you have reached the end of the stitching, press
(Reverse stitch button) or (Reinforcement stitch
button) once.
If stitching, such as buttonholes and bar tacking, that
includes reinforcement stitching has been selected, this
operation is unnecessary.
After the reverse stitching (or reinforcement stitching)
has been done, the machine stops, and the threads
are cut.
Setting the stitch width/stitch length
This machine is preset with the default settings for the
stitch width and stitch length for each stitch. These settings
can be changed as needed.
If you wish to save specific settings for a stitch so that they
can be used later, press after changing the settings to
save the new settings with the selected stitch.
Setting the stitch width
The stitch width (zigzag width) can be adjusted to make the
stitch wider or narrower.
Setting the stitch length
The stitch length can be adjusted to make the stitch coarser
(longer) or finer (shorter).
1 The point where the “Start/
Stop” button was pressed.
2 The point where
(Reverse stitch button) or
(Reinforcement stitch
button) was pressed.
3 The threads are cut here.
Memo
Press to return the setting to its default. If is
then pressed, the default settings are saved to the
machine instead of the former settings.
If a straight stitch or triple stretch stitch was selected,
changing the stitch width changes the needle position.
Increasing the width moves the needle to the right;
reducing the width moves the needle to the left.
(page 29)
means the setting cannot be changed.
32
1
CAUTION
After adjusting the stitch width, slowly turn
the handwheel toward you (counterclockwise)
and check that the needle does not touch the
presser foot. If the needle hits the presser foot,
the needle may bend or break.
If the stitches are bunched together, increase
the stitch length. Continuing to sew with the
stitches bunched together may result in the
needle bending or breaking.
Adjusting the thread tension
30
You may need to change the thread tension, depending on the
fabric and thread being used.
Correct thread tension
The upper thread and the bobbin thread should cross near
the center of the fabric. Only the upper thread should be
visible from the right side of the fabric, and only the
bobbin thread should be visible from the wrong side of the
fabric.
Upper thread is too tight
If the bobbin thread is visible from the right side of the
fabric, the upper thread is too tight. Loosen the thread
tension.
Turn the thread tension dial counterclockwise to loosen the
upper thread tension.
Upper thread is too loose
If the upper thread is visible from the wrong side of the
fabric, the upper thread is too loose. Tighten the thread
tension.
Turn the thread tension dial clockwise to tighten the upper
thread tension.
Sewing Tips
Trial sewing
Before starting your sewing project, we recommend sewing
trial stitches using thread and scrap fabric that are the same as
those used for your project.
While checking the sewing results, adjust the thread tension
as well as the stitch length and width according to the number
of fabric layers and stitch that is sewn.
Changing the sewing direction
a
When the stitching reaches a corner, stop the machine.
Leave the needle lowered (in the fabric). If the needle
remains up when the machine stops sewing, press
(Needle position button) to lower the needle.
b
Raise the presser foot lever, and then turn the fabric.
Turn the fabric using the needle as a pivot.
c
Lower the presser foot lever and continue sewing.
Adjusting the thread tension
1 Wrong side of fabric
2 Right side of fabric
3 Upper thread
4 Bobbin thread
Note
If the bobbin thread was incorrectly threaded, the upper
thread may be too tight. In this case, refer to “Installing
the bobbin” on page 14 and rethread the bobbin thread.
1 Wrong side of fabric
2 Right side of fabric
3 Upper thread
4 Bobbin thread
5 The bobbin thread is visible
from the right side of the
fabric.
Note
If the upper thread was incorrectly threaded, the upper
thread may be too loose. In this case, refer to “Upper
Threading” on page 16 and rethread the upper thread.
1 Wrong side of fabric
2 Right side of fabric
3 Upper thread
4 Bobbin thread
5 The upper thread is visible
from the wrong side of the
fabric.
1
2
3
4
1
2
3
45
1
2
3
4
5
Note
If the upper thread is not threaded correctly or the
bobbin is not installed correctly, it may not be possible
to set the correct thread tension. If the correct thread
tension cannot be achieved, rethread the upper thread
and insert the bobbin correctly.
Useful Sewing Tips
Note
Other factors, such as fabric thickness, stabilizer
material, etc., also have an effect on the stitch, so you
should always sew a few trial stitches before beginning
your project.
When sewing decorative satin stitch or satin stitch
patterns, there may be shrinking or bunching of
stitches, so be sure to use a stabilizer material.
Useful Sewing Tips
31
SEWING BASICS
2
Sewing curves
Sew slowly while slightly changing the sewing direction to
sew around the curve. For details on sewing with an even
seam allowance, refer to “Sewing an even seam allowance”
on page 31.
When sewing along a curve while using a zigzag stitch, select
a shorter stitch length in order to obtain a finer stitch.
Sewing cylindrical pieces
Removing the flat bed attachment allows for free-arm sewing,
making it easier to sew cylindrical pieces such as sleeve cuffs
and pant legs.
a
Pull the flat bed attachment off to the left.
b
Slide the part that you wish to sew onto the free arm,
and then sew from the top.
c
When you are finished with free arm sewing, install the
flat bed attachment back in its original position.
Sewing an even seam allowance
To sew an even seam, start sewing so that the seam allowance
is to the right of the presser foot, and the edge of the fabric is
aligned with either the right edge of the presser foot or a
marking on the needle plate.
Changing the needle position
The needle position used as the baseline is different for the
straight stitch (left needle position) and the straight stitch
(middle (center) needle position).
When the stitch width of the straight stitch (left needle
position) is set to its standard setting (0.0 mm), the
distance from the needle position to the right side of the
presser foot is 12 mm (1/2 inch). If the stitch width is
changed (between 0 and 7.0 mm (1/4 inch)), the needle
position will also change. By changing the stitch width
and sewing with the right side of the presser foot aligned
with the edge of the fabric, a seam allowance can be sewn
with a fixed width.
30.866 mm 30. mm
For details, refer to “Setting the stitch width” on
page 29.
Aligning the fabric with a needle plate marking
The markings on the needle plate show the distance from
the needle position of a seam sewn with the straight stitch
(left needle position). Sew while keeping the edge of the
fabric aligned with a marking on the needle plate. The
distance between the markings in the upper scale is
1/8 inch (3 mm) and the distance between the markings in
the grid is 5 mm (3/16 inch).
For stitches with a left needle position
(Stitch width: 0.0 mm)
Aligning the fabric with zigzag foot “J”
The marking on zigzag foot “J” can be used to sew about 5
mm (3/16 inch) from the edge of the fabric. When using
this feature, select a straight stitch, and set the stitch width
to 2.0 mm.
1 Straight stitch (left
needle position)
2 Straight stitch (middle
(center) needle
position)
12
1 Stitch width setting
2 Distance from the
needle position to the
right side of the
presser foot
3 12.0 mm (1/2 inch)
4 10.0 mm (3/8 inch)
5 6.5 mm (1/4 inch)
6 5.0 mm (3/16 inch)
1 Seam
2 Presser foot
3 Centimeters
4 Inches
5 Needle plate
6 1.6 cm (5/8 inch)
1 Stitch width 2.0 mm
2 Marking
3 5 mm (3/16 inch)
0.0 2.0 5.5 7.0
34 56
1
2
a
b
d
c
ef
a
b
c
Useful Sewing Tips
32
Sewing Various Fabrics
Sewing thick fabrics
If the fabric does not fit under the presser foot
The presser foot lever can be raised to two different
positions. If the fabric does not fit under the presser foot,
for example, when sewing together thick fabrics, raise the
presser foot lever to its highest position so that the fabric
can be placed under the presser foot.
If the fabric does not feed
When sewing thick fabric such as denim or quilting, the
fabric may not feed at the start of sewing if the presser foot
is not level, as shown below. In this case, use the presser
foot locking pin (black button on the left side) of zigzag
foot “J” so that the presser foot remains level while sewing,
allowing the fabric to be fed smoothly.
If the presser foot misalignment is too large, place thick
paper or fabric (with the same thickness as the fabric being
sewn) under the heel of the presser foot to be able to start
sewing smoothly.
1 Sewing direction
2 Misalignment
3 Fabric being sewn
4 Fabric or thick paper
a
Raise the presser foot lever.
b
Align the beginning of stitching, and then position the
fabric.
c
While holding zigzag foot “J” level, push in and hold
the presser foot locking pin (black button on the left
side), and lower the presser foot lever.
d
Release the presser foot locking pin (black button).
The presser foot remains level, allowing the fabric to
be fed.
After the seam is sewn, the presser foot will return to
its original angle.
Sewing thin fabrics
When sewing thin fabrics such as chiffon, the stitching may
become misaligned or the fabric may not feed correctly. Move
the needle (be sure to use a fine needle) to the furthest left or
right hand position so that the fabric does not get pulled down
into the feed dog area. If this occurs or there is shrinkage of
the stitching, place non-woven water soluble stabilizer under
the fabric and sew them together.
Sewing stretch fabrics
First, baste the pieces of fabric together, and then sew without
stretching the fabric. If the stitching is misaligned, place non-
woven water soluble stabilizer under the fabric and sew them
together.
For best results when sewing on knit fabrics use the stretch
stitches. Also be sure to use a needle for knits (Ball Point
needle (gold colored)). The recommended stitches and their
stitch numbers are shown below.
1 Presser foot
locking pin (black
button)
b
a
d
c
a
CAUTION
If fabric more than 6 mm (15/64 inch) thick is
sewn or if the fabric is pushed with too much
force, the needle may bend or break.
1 water soluble stabilizer
(non-woven)
1 Basting
No. 05 06 11 12 43
Stitch
Note
Be sure to follow manufacturer's instructions when
using water soluble stabilizer. It may not be compatible
with some fabrics.
1
1
Useful Sewing Tips
33
SEWING BASICS
2
Sewing leathers or vinyl fabrics
When sewing fabrics that may stick to the presser foot, such as
leather or vinyl fabrics, replace the presser foot with the
walking foot* or non stick foot* .
* Items sold separately, please contact your authorized
Brother dealer.
If the leather or vinyl fabric sticks to the flat bed attachment,
sew with copy paper or tracing paper placed on top of the flat
bed attachment so the fabric moves smoothly.
If the paper is positioned so that it does not cover the needle
plate, the paper will not be sewn together with the fabric.
1 Copy paper or tracing paper
Sewing hook-and-loop fastener tape
Make sure that the needle passes through the hook-and-loop
fastener tape by turning the handwheel and lower the needle
into the hook-and-loop fastener tape before sewing. And then,
sew the edge of the hook-and-loop fastener tape at a slow
speed.
If the needle does not pass through the hook-and-loop
fastener tape, replace the needle with the needle size for
thicker fabrics. For details, refer to “Fabric/Thread/Needle
Combinations” on page 19.
Sewing decorative stitch patterns
1 Leather
Note
The walking foot can only be used with straight or
zigzag stitch patterns. Do not sew reverse stitches with
the walking foot.
When sewing with the walking foot, sew at a speed
between slow and medium.
When using the walking foot, test sew on a scrap piece
of leather or vinyl that is to be used in project to make
sure foot does not leave any marks.
CAUTION
Use only the adhesive-free hook-and-loop
fastener tape which is designed for sewing.
When the glue adheres to the needle or the
bobbin case, it may cause malfunction.
If the hook-and-loop fastener tape is sewn with
the thin needle (65/9-75/11), the needle may
bend or break.
Note
Before sewing, baste together the fabric and the hook-
and-loop fastener tape.
1
a
1 Edge of the hook-and-loop
fastener tape
Fabric When sewing on stretch fabrics, lightweight
fabrics, or fabrics with coarse weaves, attach
stabilizer on the wrong side of the fabric. An
alternative would be to place the fabric on thin
paper such as tracing paper.
1 Fabric
2 Stabilizer
3 Thin paper
Thread #50 - #60
Needle With lightweight, regular, or stretch fabrics: the Ball
point needle (golden colored) 90/14
With heavyweight fabrics: home sewing machine
needle 90/14
1
Useful Sewing Tips
34
Stitch Chart
35
VARIOUS STITCHES
3
Utility stitches
*1
Twin needle can be used by attaching zigzag foot “J”. (page 35
to 37)
Chapter 3
VARIOUS STITCHES
Stitch Chart
Memo
When any of the following stitches (reverse stitch
patterns and reinforcement stitch patterns) are selected,
pressing (Reverse stitch button) will sew reverse
stitches.
When any other stitch is selected, pressing (Reverse
stitch button) will sew reinforcement stitches.
The stitch pattern symbols indicate the following.
Note
The walking foot can only be used with straight or
zigzag stitch patterns. Do not sew reverse stitches with
the walking foot.
Stitch
(Presser
foot)
No. Stitch name/Applications
Stitch
width
(mm
(inch))
Auto.
Manual
Stitch
length
(mm
(inch))
Auto.
Manual
(J)
01
*1
Straight stitch (Left)
General sewing, gather,
pintuck, etc.
0.0 (0)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.2 - 5.0
(1/64 - 3/16)
(J)
02
*1
Straight stitch (Left)
General sewing, gather,
pintuck, etc.
0.0 (0)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.2 - 5.0
(1/64 - 3/16)
No. 01 02 03 04
Stitch
No. 08 09 10 11
Stitch
No. 12 25 26 28
Stitch
1 Left needle
position
2 Middle (center)
needle position
3 Right needle
position
4 Reverse stitch
pattern
5 Reinforcement
stitch pattern
a
b
c
d
e
d
e
(J)
03
*1
Straight stitch (Middle)
General sewing, gather,
pintuck, etc.
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.2 - 5.0
(1/64 - 3/16)
(J)
04
*1
Straight stitch (Middle)
General sewing, gather,
pintuck, etc.
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.2 - 5.0
(1/64 - 3/16)
(J)
05
*1
Triple stretch stitch
General sewing for
reinforcement and
decorative topstitching
0.0 (0)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(J)
06
*1
Stem stitch
Reinforced stitching,
sewing and decorative
applications
1.0 (1/16)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(J)
07
Basting stitch
For basting.
If the basting threads fall
out of the fabric, pull up
the bobbin thread before
sewing, and then pull the
upper thread and bobbin
thread under the presser
foot toward the back of the
machine (page 18). Hold
the upper thread and
bobbin thread when
beginning to sew, and
when finished sewing, cut
the threads leaving an
excess amount of thread.
Finally, hold the upper
thread and bobbin thread
at the beginning of the
stitching while arranging
the fabric.
0.0 (0)
0.0 - 7.0
(0 - 1/4)
-
(J)
08
*1
Zigzag stitch
For overcasting, mending.
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
1.4 (1/16)
0.0 - 4.0
(0 - 3/16)
(J)
09
*1
Zigzag stitch
For overcasting, mending.
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
1.4 (1/16)
0.0 - 4.0
(0 - 3/16)
(J)
10
*1
Zigzag stitch (Right)
Start from right needle
position, zigzag sews to
left.
3.5 (1/8)
2.5 - 5.0
(3/32 - 3/16)
1.4 (1/16)
0.3 - 4.0
(1/64 - 3/16)
(J)
11
*1
2 steps elastic zigzag
stitch
Overcasting (medium
weight and stretch fabrics),
tape and elastic
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
1.0 (1/16)
0.2 - 4.0
(1/64 - 3/16)
(J)
12
*1
3 steps elastic zigzag
stitch
Overcasting (medium,
heavyweight and stretch
fabrics), tape and elastic
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
1.0 (1/16)
0.2 - 4.0
(1/64 - 3/16)
Stitch
(Presser
foot)
No. Stitch name/Applications
Stitch
width
(mm
(inch))
Auto.
Manual
Stitch
length
(mm
(inch))
Auto.
Manual
Stitch Chart
36
(G)
13
Overcasting stitch
Reinforcing of light and
medium weight fabrics
3.5 (1/8)
2.5 - 5.0
(3/32 - 3/16)
2.0 (1/16)
0.4 - 4.0
(1/64 - 3/16)
(G)
14
Overcasting stitch
Reinforcing of heavyweight
fabric
5.0 (3/16)
2.5 - 5.0
(3/32 - 3/16)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(G)
15
Overcasting stitch
Reinforcing of medium,
heavyweight and easily
friable fabrics or decorative
stitching.
5.0 (3/16)
3.5 - 5.0
(1/8 - 3/16)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(J)
16
*1
Overcasting stitch
Reinforced seaming of
stretch fabric
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(J)
17
*1
Overcasting stitch
Reinforcing of medium
stretch fabric and
heavyweight fabric,
decorative stitching
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(J)
18
*1
Overcasting stitch
Reinforcement of stretch
fabric or decorative
stitching
4.0 (3/16)
0.0 - 7.0
(0 - 1/4)
4.0 (3/16)
0.4 - 4.0
(1/64 - 3/16)
(J)
19
Overcasting stitch
Stretch knit seam
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
4.0 (3/16)
0.4 - 4.0
(1/64 - 3/16)
(S)
20
With side cutter
Straight stitch while cutting
fabrics
0.0 (0)
0.0 - 2.5
(0 - 3/32)
2.5 (3/32)
0.2 - 5.0
(1/64 - 3/16)
(S)
21
With side cutter
Zigzag stitch while cutting
fabrics
3.5 (1/8)
3.5 - 5.0
(1/8 - 3/16)
1.4 (1/16)
0.0 - 4.0
(0 - 3/16)
(S)
22
With side cutter
Overcasting stitch while
cutting fabrics
3.5 (1/8)
3.5 - 5.0
(1/8 - 3/16)
2.0 (1/16)
0.4 - 4.0
(1/64 - 3/16)
(S)
23
With side cutter
Overcasting stitch while
cutting fabrics
5.0 (3/16)
3.5 - 5.0
(1/8 - 3/16)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(S)
24
With side cutter
Overcasting stitch while
cutting fabrics
5.0 (3/16)
3.5 - 5.0
(1/8 - 3/16)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(J)
25
Piecing stitch (Right)
Piecework/patchwork 6.5
mm (approx. 1/4 inch) right
seam allowance
5.5 (7/32)
0.0 - 7.0
(0 - 1/4)
2.0 (1/16)
0.2 - 5.0
(1/64 - 3/16)
(J)
26
Piecing stitch (Middle)
Piecework/patchwork
-
2.0 (1/16)
0.2 - 5.0
(1/64 - 3/16)
Stitch
(Presser
foot)
No. Stitch name/Applications
Stitch
width
(mm
(inch))
Auto.
Manual
Stitch
length
(mm
(inch))
Auto.
Manual
(J)
27
Hand-look quilting stitch
Quilting stitch made to
look like hand quilting
when using transparent
nylon thread for the upper
thread and a thread color
matching the quilt for the
bobbin thread.
Sew with a tight thread
tension so that the bobbin
thread is visible from the
right side of the fabric.
Use a needle between 90/
14 and 100/16.
0.0 (0)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(J)
28
Quilting appliqué zigzag
stitch
Zigzag stitch for quilting
and sewing on appliqué
quilt pieces
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
1.4 (1/16)
0.0 - 4.0
(0 - 3/16)
(J)
29
Quilting appliqué stitch
Quilting stitch for invisible
appliqué or attaching
binding
1.5 (1/16)
0.0 - 3.5
(0 - 1/8)
1.8 (1/16)
0.4 - 4.0
(1/64 - 3/16)
(J)
30
Quilting stippling stitch
Background quilting
7.0 (1/4)
0.0 - 7.0
(0 - 1/4)
1.6 (1/16)
0.4 - 4.0
(1/64 - 3/16)
(R)
31
Blind hem stitch
Hemming woven fabrics
* The stitch width setting
is in neither millimeters
nor inches.
00
3 - 3
2.0 (1/16)
0.4 - 4.0
(1/64 - 3/16)
(R)
32
Blind hem stretch stitch
Hemming stretch fabric
* The stitch width setting
is in neither millimeters
nor inches.
00
3 - 3
2.0 (1/16)
0.4 - 4.0
(1/64 - 3/16)
(J)
33
*1
Blanket stitch
Appliqués, decorative
blanket stitch
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(J)
34
*1
Blanket stitch
Appliqués, decorative
blanket stitch
2.5 (3/32)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(J)
35
*1
Shell tuck edge stitch
Shell tuck edge finish on
fabrics
4.0 (3/16)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.2 - 4.0
(1/64 - 3/16)
(N)
36
*1
Satin scallop stitch
Decorating collar of
blouse, edge of
handkerchief
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
0.5 (1/32)
0.1 - 4.0
(1/64 - 3/16)
(J)
37
*1
Patchwork join stitch
Patchwork stitches,
decorative stitching
4.0 (3/16)
0.0 - 7.0
(0 - 1/4)
1.2 (1/16)
0.2 - 4.0
(1/64 - 3/16)
(J)
38
*1
Patchwork double
overlock stitch
Patchwork stitches,
decorative stitching
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(J)
39
*1
Couching stitch
Decorative stitching,
attaching cord and
couching
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
1.2 (1/16)
0.2 - 4.0
(1/64 - 3/16)
(J)
40
*1
Smocking stitch
Smocking, decorative
stitching
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
1.6 (1/16)
0.4 - 4.0
(1/64 - 3/16)
Stitch
(Presser
foot)
No. Stitch name/Applications
Stitch
width
(mm
(inch))
Auto.
Manual
Stitch
length
(mm
(inch))
Auto.
Manual
Stitch Chart
37
VARIOUS STITCHES
3
(J)
41
*1
Feather stitch
Fagoting, decorative
stitching
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(J)
42
*1
Fagoting cross stitch
Fagoting, bridging and
decorative stitching
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(J)
43
*1
Tape attaching stitch
Attaching tape to seam in
stretch fabric
4.0 (3/16)
0.0 - 7.0
(0 - 1/4)
1.0 (1/16)
0.2 - 4.0
(1/64 - 3/16)
(N)
44
Ladder stitch
Decorative stitching
4.0 (3/16)
0.0 - 7.0
(0 - 1/4)
3.0 (1/8)
0.4 - 4.0
(1/64 - 3/16)
(J)
45
*1
Rick-rack stitch
Decorative top stitching
4.0 (3/16)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(J)
46
*1
Decorative stitch
Decorative stitching
5.5 (7/32)
0.0 - 7.0
(0 - 1/4)
1.6 (1/16)
0.4 - 4.0
(1/64 - 3/16)
(N)
47
*1
Serpentine stitch
Decorative stitching and
attaching elastic
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
1.0 (1/16)
0.2 - 4.0
(1/64 - 3/16)
(N)
48
*1
Hemstitching zigzag
Decorative hems, top
stitching
6.0 (15/64)
0.0 - 7.0
(0 - 1/4)
3.0 (1/8)
0.4 - 4.0
(1/64 - 3/16)
(N)
49
Hemstitching
Decorative hems, lace
attaching pin stitch
3.5 (1/8)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(N)
50
Hemstitching
Decorative hems
3.0 (1/8)
0.0 - 7.0
(0 - 1/4)
3.5 (1/8)
0.4 - 4.0
(1/64 - 3/16)
(N)
51
Hemstitching
Decorative hems, daisy
stitch
6.0 (15/64)
0.0 - 7.0
(0 - 1/4)
3.0 (1/8)
0.4 - 4.0
(1/64 - 3/16)
(N)
52
Hemstitching
Heirloom, decorative hems
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
3.5 (1/8)
0.4 - 4.0
(1/64 - 3/16)
(N)
53
*1
Hemstitching
Heirloom, decorative hems
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
4.0 (3/16)
0.4 - 4.0
(1/64 - 3/16)
(N)
54
*1
Hemstitching
Heirloom, decorative hems
6.0 (15/64)
0.0 - 7.0
(0 - 1/4)
1.6 (1/16)
0.4 - 4.0
(1/64 - 3/16)
(N)
55
Hemstitching
Heirloom, decorative hems
6.0 (15/64)
0.0 - 7.0
(0 - 1/4)
3.0 (1/8)
0.4 - 4.0
(1/64 - 3/16)
(N)
56
Hemstitching
Heirloom, decorative hems
4.0 (3/16)
0.0 - 7.0
(0 - 1/4)
2.5 (3/32)
0.4 - 4.0
(1/64 - 3/16)
(N)
57
*1
Hemstitching
Heirloom, decorative hems
5.0 (3/16)
0.0 - 7.0
(0 - 1/4)
2.0 (1/16)
0.4 - 4.0
(1/64 - 3/16)
(A)
58
Narrow rounded
buttonhole stitch
Buttonhole on light to
medium weight fabrics
5.0 (3/16)
3.0 - 6.0
(1/8 - 15/64)
0.4 (1/64)
0.2 - 1.0
(1/64 - 1/16)
Stitch
(Presser
foot)
No. Stitch name/Applications
Stitch
width
(mm
(inch))
Auto.
Manual
Stitch
length
(mm
(inch))
Auto.
Manual
(A)
59
Tapered round ended
buttonhole stitch
Reinforced waist tapered
buttonholes
5.0 (3/16)
3.0 - 6.0
(1/8 - 15/64)
0.4 (1/64)
0.2 - 1.0
(1/64 - 1/16)
(A)
60
Round ended buttonhole
stitch
Buttonholes with vertical
bar tack in heavyweight
fabrics
5.0 (3/16)
3.0 - 6.0
(1/8 - 15/64)
0.4 (1/64)
0.2 - 1.0
(1/64 - 1/16)
(A)
61
Narrow squared
buttonhole stitch
Buttonholes for light to
medium weight fabrics
5.0 (3/16)
3.0 - 6.0
(1/8 - 15/64)
0.4 (1/64)
0.2 - 1.0
(1/64 - 1/16)
(A)
62
Stretch buttonhole stitch
Buttonholes for stretch or
woven fabrics
6.0 (15/64)
3.0 - 6.0
(1/8 - 15/64)
1.0 (1/16)
0.5 - 2.0
(1/32 - 1/16)
(A)
63
Heirloom buttonhole
stitch
Buttonholes for heirloom
and stretch fabrics
6.0 (15/64)
3.0 - 6.0
(1/8 - 15/64)
1.5 (1/16)
1.0 - 3.0
(1/16 - 1/8)
(A)
64
Bound buttonhole stitch
The first step in making
bound buttonholes
5.0 (3/16)
0.0 - 6.0
(0 - 15/64)
2.0 (1/16)
0.2 - 4.0
(1/64 - 3/16)
(A)
65
Keyhole buttonhole
stitch
Buttonholes in
heavyweight or thick
fabrics for larger flat
buttons
7.0 (1/4)
3.0 - 7.0
(1/8 - 1/4)
0.5 (1/32)
0.3 - 1.0
(1/64 - 1/16)
(A)
66
Tapered keyhole
buttonhole stitch
Buttonholes in medium to
heavy weight fabrics for
larger flat buttons
7.0 (1/4)
3.0 - 7.0
(1/8 - 1/4)
0.5 (1/32)
0.3 - 1.0
(1/64 - 1/16)
(A)
67
Keyhole buttonhole
stitch
Buttonholes with vertical
bar tack for reinforcement
in heavyweight or thick
fabrics
7.0 (1/4)
3.0 - 7.0
(1/8 - 1/4)
0.5 (1/32)
0.3 - 1.0
(1/64 - 1/16)
(A)
68
Darning stitch
Darning of heavyweight
fabric
7.0 (1/4)
2.5 - 7.0
(3/32 - 1/4)
2.0 (1/16)
0.4 - 2.5
(1/64 - 3/32)
(A)
69
Bar tack stitch
Reinforcement at opening
of pocket, etc.
2.0 (1/16)
1.0 - 3.0
(1/16 - 1/8)
0.4 (1/64)
0.3 - 1.0
(1/64 - 1/16)
(M)
70
Button sewing stitch
Attaching buttons
3.5 (1/8)
2.5 - 4.5
(3/32 - 3/16)
-
(N)
71
Eyelet stitch
For making eyelets, holes
on belts, etc.
7.0 (1/4)
7.0 6.0 5.0
(1/4 15/64
3/16)
7.0 (1/4)
7.0 6.0 5.0
(1/4 15/64
3/16)
Stitch
(Presser
foot)
No. Stitch name/Applications
Stitch
width
(mm
(inch))
Auto.
Manual
Stitch
length
(mm
(inch))
Auto.
Manual
Stitch Chart
38
Decorative stitches
Use monogramming foot “N”.
The twin needle can only be used with satin stitch. In
addition, be sure to attach zigzag foot “J” when using the
twin needle.
* Stitch pattern for making adjustments. (page 55)
Character stitches
Use monogramming foot “N”.
The twin needle cannot be used.
Decorative Stitches
01 02 03 04 05 06 07 08 09 10
11 12 13 14 15 16 17 18 19 20
99*
Decorative satin stitches
01 02 03 04 05 06
Satin stitches
07 08 09 10 11 12 13 14
Cross stitch stitches
15 16 17 18 19
Utility decorative stitches
01 02 03 04 05 06 07 08 09 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
Character stitches (Gothic font)
01 02 03 04 05 06 07 08 09 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70
71 72 73 74 75 76 77 78 79 80
Character stitches (Handwriting font)
01 02 03 04 05 06 07 08 09 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70
71 72 73 74 75 76 77 78 79 80
Stitch Chart
39
VARIOUS STITCHES
3
Preset utility stitches
The most frequently used utility stitches are assigned to the
numeric keys.These stitches can be selected simply by
pressing the designated key while in the preset utility stitch
mode.
Character stitches (Outline)
01 02 03 04 05 06 07 08 09 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70
71 72 73 74 75 76 77 78 79 80
Character stitches (Japanese font)
01 02 03 04 05 06 07 08 09 10
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
31 32 33 34 35 36 37 38 39 40
41 42 43 44 45 46 47 48 49 50
51 52 53 54 55 56 57 58 59 60
61 62 63 64 65 66 67 68 69 70
71 72 73 74 75 76 77 78 79 80
81 82 83 84 85 86 87 88 89 90
91 92 93 94 95 96 97 98 99 100
101 102 103 104 105 106 107 108 109 110
111 112 113 114 115 116 117 118 119 120
121 122 123 124 125 126 127 128 129 130
131 132 133 134 135 136 137 138 139 140
141 142 143 144 145 146 147 148 149 150
151 152 153 154 155 156 157 158 159 160
161 162 163 164 165 166 167 168 169 170
171 172 173 174 175 176 177 178 179 180
181 182 183 184 185 186 187 188 189 190
191 192 193 194 195 196 197 198 199 200
201 202 203 204 205 206 207 208 209 210
Preset utility
stitches
Stitch name No.
Straight stitch (Left) 01
Straight stitch (Left) 02
Straight stitch (Middle) 03
Straight stitch (Middle) 04
Zigzag stitch 08
Zigzag stitch 09
Triple stretch stitch 05
Stem stitch 06
Overcasting stitch 13
3 steps elastic zigzag stitch 12
Utility stitches
40
Overcasting Stitches
Sew overcasting stitches along the edges of cut fabric to
prevent them from fraying.
Using overcasting foot “G
a
Attach overcasting foot “G”.
b
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
c
Position the fabric with the edge of the fabric against
the presser foot guide, and then lower the presser foot
lever.
d
Rotate the handwheel toward you (counterclockwise).
Check that the needle does not touch the presser foot.
e
Sew with the edge of the fabric against the presser foot
guide.
f
Press the “Start/Stop” button to stop sewing when you
are finished, and raise the presser foot and needle to
pull the fabric under the presser foot towards the back
of the machine.
Using zigzag foot “J
a
Attach zigzag foot “J”.
b
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
c
Sew along the edge of the fabric with the needle
dropping off the edge at the right.
Utility stitches
CAUTION
Before replacing the presser foot, be sure to
press (Presser foot/Needle exchange key)
on the operation panel to lock all keys and
buttons, otherwise injuries may occur if the
“Start/Stop” button or any other button is
pressed and the machine starts. For details on
changing the presser foot, refer to “Replacing
the Presser Foot” on page 21.
No. 13 14 15
Stitch
CAUTION
When using overcasting foot “G”, be sure to
select a stitch that can be used with
overcasting foot “G”. If you sew with the
incorrect stitch, the needle may hit the presser
foot, bending the needle or damaging the
presser foot.
1 Presser foot guide
G
a
1 The needle should
not touch the
presser foot center
bar
1 Needle drop point
CAUTION
Be sure to pull the fabric backward after
finished sewing. If you pull the fabric toward
side or forward, the presser foot pin may be
damaged.
If thread is tangled on the presser foot, remove
the entangled thread, and then raise the
presser foot lever to remove the presser foot. If
the presser foot is raised while entangled with
thread, the presser foot may be damaged.
No. 08 10 11 12
Stitch
No. 16 17 18 19
Stitch
1 Needle drop point
1
a
Utility stitches
41
VARIOUS STITCHES
3
Blind Hem Stitching
Secure the lower edge of skirts and pants with a blind hem.
a
Turn the skirt or pants inside out.
b
Fold the lower edge of fabric to the desired length to
be hemmed and then press.
c
Using tailor's chalk, mark the fabric about 5 mm (3/16
inch) from the edge of the fabric, and then baste it.
d
Fold back the fabric inside along the basting.
e
Unfold the edge of fabric, and position the fabric with
the wrong side facing up.
f
Attach blind stitch foot “R”.
g
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
h
Remove the flat bed attachment to use the free arm.
i
Slide the item that you wish to sew onto the free arm,
make sure that the fabric feeds correctly, and then start
sewing.
j
Position the fabric with the edge of the folded hem
against the presser foot guide, and then lower the
presser foot lever.
Memo
When the size of cylindrical pieces is too small to slide
onto the arm or the length is too short, the fabric will not
feed and desired results may not be achieved.
1 Wrong side of fabric
2 Right side of fabric
3 Lower edge of fabric
1 Wrong side of fabric
2 Right side of fabric
3 Lower edge of fabric
4 Desired length for hem
<Thick fabric>
<Normal fabric>
<Seen from the side>
1 Wrong side of fabric
2 Right side of fabric
3 Lower edge of fabric
4 Desired length for hem
5 5 mm (3/16 inch)
6 Basting
<Thick fabric>
<Normal fabric>
<Seen from the side>
1 Wrong side of fabric
2 Right side of fabric
3 Lower edge of fabric
4 Desired length for hem
5 5 mm (3/16 inch)
6 Basting
7 Basting point
<Thick fabric>
<Normal fabric>
<Seen from the side>
a
b
c
1
2
1
2
1
3
3
4
2
1
2
1
2
356
4
1
2
1
3
6
5
1
1
2
7
4
1 Wrong side of fabric
2 Right side of fabric
3 Edge of fabric
4 Desired edge of hem
5 Basting point
6 Basting
<Thick fabric>
<Normal fabric>
<Seen from the side>
No. 31 32
Stitch
1 Free arm
1 Wrong side of
fabric
2 Fold of hem
3 Presser foot guide
a
b
f
c
a
a
c
d
a
f
a
a
b
e
a
Utility stitches
42
k
Adjust the stitch width until the needle slightly catches
the fold of the hem. (page 29)
When you change the needle drop point, raise the
needle, and then change the stitch width.
* To make fine adjustments to the needle drop point,
adjust the stitch width setting. (The stitch width
setting is in neither millimeters nor inches.)
l
Sew with the fold of the hem against the presser foot
guide.
m
Press the “Start/Stop” button to stop sewing when you
are finished, and raise the presser foot and needle to
pull the fabric under the presser foot towards the back
of the machine.
n
Remove the basting stitching and turn the fabric with
the right side facing out.
Buttonhole sewing
The maximum buttonhole length is about 28 mm (1-1/8
inches) (diameter + thickness of the button).
Buttonholes are sewn from the front of the presser foot to the
back, as shown below.
1 Reinforcement stitching
The part names of buttonhole foot “A”, which is used to create
buttonholes, are indicated below.
1 Needle drop point
1 Thick fabric
2 Normal fabric
Memo
Blind hem stitches cannot be sewn if the left needle
drop point does not catch the fold. If the needle catches
too much of the fold, the fabric cannot be unfolded and
the seam appearing on the right side of the fabric will be
very large, leaving an unattractive finish.
Note
Be sure to pull the fabric towards the back of the
machine after sewing. If you pull the fabric toward side
or forward, the presser foot may be damaged.
1 Wrong side of
fabric
2 Right side of
fabric
a
b
1
2
1 Button guide plate
2 Presser foot scale
3 Presser foot pin
4 Marks on
buttonhole foot
5 5 mm (3/16 inch)
Note
Before sewing buttonholes, check the stitch length and
width by sewing a trial buttonhole on a scrap piece of
fabric used for your project.
5
2
1
3
4
A
Utility stitches
43
VARIOUS STITCHES
3
a
Use chalk to mark on the fabric the position and length
of the buttonhole.
b
Pull out the button guide plate of buttonhole foot “A”,
and then insert the button that will be put through the
buttonhole.
If the button does not fit in the button guide
plate
Add together the diameter and thickness of the button,
and then set the button guide plate to the calculated
length. (The distance between the markings on the presser
foot scale is 5 mm (3/16 inch).)
Example: For a button with a diameter of 15 mm (9/16
inch) and a thickness of 10 mm (3/8 inch), the button
guide plate should be set to 25 mm (1 inch) on the scale.
The size of the buttonhole is set.
c
Attach buttonhole foot “A”.
Position the upper thread under the presser foot by
guiding thread through the hole in the presser foot
before attaching the buttonhole foot “A”.
d
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
e
Position the fabric with the front end of the buttonhole
mark aligned with the red marks on the sides of the
buttonhole foot, and then lower the presser foot lever.
f
Pull down the buttonhole lever as far as possible.
The buttonhole lever is positioned behind the bracket
on the buttonhole foot.
g
Gently hold the end of the upper thread in your left
hand, and then start sewing.
Once sewing is completed, the machine
automatically sews reinforcement stitches, then
stops.
1 Marks on fabric
2 Buttonhole sewing
1 Presser foot scale
2 Length of
buttonhole
(diameter +
thickness of
button)
3 5 mm (3/16 inch)
1 10 mm (3/8 inch)
2 15 mm (9/16 inch)
No. 58 59 60 61 62
Stitch
No. 63 64 65 66 67
Stitch
a
b
3
2
1
2
1
1 Mark on fabric
(front)
2 Red marks on
buttonhole foot
3 Upper thread
Note
When lowering the presser foot, do not push in the front
of the presser foot, otherwise the bar tack will not be
sewn with the correct size.
Memo
If there is difficulty in aligning the marks, slowly turn the
handwheel toward you to check where the needle will
enter the fabric, and then align the mark on the fabric
with that point.
1 Buttonhole lever
1 Buttonhole lever
2 Bracket
A
a
b
c
a
2
1
Utility stitches
44
h
Press (Thread cutter button) once.
Raise the presser foot, and then remove the fabric.
i
Raise the buttonhole lever to its original position.
j
Insert a pin along the inside of one bar tack at the end
of the buttonhole stitching to prevent the stitching
from being cut.
k
Use the seam ripper to cut towards the pin and open
the buttonhole.
For keyhole buttonholes, use the eyelet punch to make
a hole in the rounded end of the buttonhole, and then
use the seam ripper to cut open the buttonhole.
When using the eyelet punch, place thick paper or
some other protective sheet under the fabric before
punching the hole in the fabric.
Sewing buttonholes on stretch fabrics
When sewing buttonholes on stretch fabrics, use a gimp
thread.
a
Hook the gimp thread onto the part of buttonhole foot
“A” shown in the illustration.
b
It fits into the grooves, and then loosely tie it.
c
Attach buttonhole foot “A”.
d
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
e
Adjust the stitch width to the thickness of the gimp
thread.
f
Lower the presser foot lever and the buttonhole lever,
and then start sewing.
g
When sewing is finished, gently pull the gimp thread to
remove any slack.
h
Use a handsewing needle to pull the gimp thread to the
wrong side of the fabric, and then tie it.
Memo
When using the thread cutter on the left side of the
machine or scissors to cut the threads, press
(Needle position button) to raise the needle, raise the
presser foot, and then pull out the fabric before cutting
the threads.
1 Pin
1 Seam ripper
1 Eyelet punch
CAUTION
When opening the buttonhole with the seam
ripper, do not place your hands in the cutting
direction, otherwise injuries may result if the
seam ripper slips.
Do not use the seam ripper in any other way
than how it is intended.
1
1
1
No. 62 63
Stitch
Utility stitches
45
VARIOUS STITCHES
3
Button sewing
Buttons can be sewn on with the machine. Buttons with two
or with four holes can be attached.
a
Measure the distance between the holes in the button
to be attached.
b
Raise the presser foot lever, and then slide the feed dog
position switch, located at the rear of the machine on
the base, to (to the left as seen from the rear of
the machine).
The feed dogs are lowered.
c
Attach button fitting foot “M”.
d
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
Since the end of the thread will be tied off later, do
not set the machine for programmed thread cutting.
e
Adjust the stitch width so that it is the same as the
distance between the holes in the button.
f
Place the button in the position where it will be sewn,
and lower the presser foot lever.
When attaching four-hole buttons, first sew the two
holes closest to you. Then, slide the button so that
the needle goes into the two holes toward the rear of
the machine, and then sew them in the same way.
g
Turn the handwheel toward you (counterclockwise) to
check that the needle correctly goes into the two holes
of the button.
If it seems as if the needle will hit the button, remeasure
the distance between the holes in the button. Adjust the
stitch width to the distance between the button holes.
h
Sew about 10 stitches at a slow speed.
Set the sewing speed controller to the left (so that the
speed will be slow).
The machine automatically stops after sewing
reinforcement stitches.
Do not press (Thread cutter button).
i
Use scissors to cut the upper thread and the bobbin
thread at the beginning of the stitching.
Pull the upper thread at the end of the stitching to the
wrong side of the fabric, and then tie it with the bobbin
thread.
j
When you are finished attaching the button, slide the
feed dog position switch, to (to the right as seen
from the rear of the machine) and turn the handwheel
to raise the feed dogs.
No. 70
Stitch
1 Button
a
CAUTION
When sewing, be sure that the needle does not
touch the button, otherwise the needle may
bend or break.
Memo
The feed dogs come up when you start sewing again.
Utility stitches
46
Attaching a shank to a button
To sew the button with a shank, attach the button with
space between it and the fabric, and then wind the thread
by hand. This attaches the button securely.
a
Place the button into button fitting foot “M”, and then
pull the shank lever toward you.
1 Shank lever
b
After sewing is finished, cut the upper thread with
plenty of excess, wind it around the thread between
the button and the fabric, and then tie it to the upper
thread at the beginning of the stitching.
Tie together the ends of the bobbin thread at the end
and at the beginning of the stitching at the wrong side of
the fabric.
c
Cut off any excess thread.
Zipper Insertion
Inserting a centered zipper
Stitching is sewn on both pieces of fabric butted against each
other.
a
Attach zigzag foot “J”.
b
Sew straight stitches up to the zipper opening.
With the right sides of the fabric facing each other, sew
reverse stitches after reaching the zipper opening.
c
Using a basting stitch, continue sewing to the edge of
the fabric.
d
Press open the seam allowance from the wrong side of
the fabric.
e
Align the seam with the center of the zipper, and then
baste the zipper in place to the seam allowance.
f
Remove about 5 cm (2 inches) from the end of the
basting on the outside.
g
Attach the presser foot holder to the right pin of zipper
foot “I”.
h
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
1 Right side of fabric
2 Stitching
3 End of zipper opening
1 Reverse stitches
2 End of zipper opening
1
1
2
3
a
b
1 Basting stitching
2 Wrong side of fabric
1 Wrong side of fabric
1 Wrong side of fabric
2 Basting stitching
3 Zipper
1 Wrong side of fabric
2 Zipper basting
3 Outside basting
4 5 cm (2 inches)
1 Pin on the right side
2 Needle drop point
No. 03
Stitch
a
b
1
1
2
3
4
1
2
3
2
1
I
Utility stitches
47
VARIOUS STITCHES
3
i
Topstitch around the zipper.
1 Stitching
2 Right side of fabric
3 Basting stitching
4 End of zipper opening
j
Remove the basting stitching.
Appliqué, Patchwork and Quilt Stitching
Appliqué stitching
a
Baste or glue the appliqué piece to the base fabric to
secure it.
b
Attach the zigzag foot “J”.
c
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
d
Turn the handwheel toward you (counterclockwise),
and then begin sewing around the edge of the
appliqué, making sure that the needle drops just
outside of the appliqué.
When sewing around corners, stop the machine with
the needle in the fabric just outside of the appliqué,
raise the presser foot lever, and then turn the fabric as
needed to change the sewing direction.
Patchwork (crazy quilt) stitching
a
Fold the edge of the top piece of fabric and place it
over the lower piece.
b
Attach zigzag foot “J”.
c
Select a stitch.
The stitches shown below are examples. Select the
desired stitch.
For details, refer to “Stitch Chart” on page 35.
d
Sew the two pieces of fabric together so the stitch
pattern spans over both pieces.
Use pins if necessary.
Piecing
Sewing together two pieces of fabric is called “piecing”. The
fabric pieces should be cut with a 6.5 mm (1/4 inch) seam
allowance.
Sew a piecing straight stitch 6.5 mm (1/4 inch) from either the
right side or the left side of the presser foot.
CAUTION
When using zipper foot “I”, be sure to select
the straight stitch (middle (center) needle
position), and slowly turn the handwheel
toward
you (
counterclockwise)
to check that
the needle does not touch the presser foot. If a
different stitch is selected or the needle hits
the presser foot, the needle may bend or
break.
CAUTION
When sewing, be sure that the needle does not
touch the zipper, otherwise the needle may
bend or break.
Memo
If the presser foot contacts the zipper slider, leave the
needle lowered (in the fabric) and raise the presser foot.
After moving the slider so it will not contact the presser
foot, lower the presser foot and continue sewing.
Note
If glue is used to hold the appliqué in place on the
fabric, do not apply glue to areas that will be sewn with
the machine. If glue adheres to the needle or bobbin
case, the machine may be damaged.
1
2
3
4
No. 28 29 33 34
Stitch
No. 28 37 38 39
Stitch
CAUTION
Do not stitch over pins.
Utility stitches
48
a
Baste or pin along the seam allowance of the fabric
that you wish to piece together.
b
Attach zigzag foot “J”.
c
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
d
Sew with the side of the presser foot aligned with the
edge of the fabric.
For a seam allowance on the right side
Align the edge of the fabric with the right side of the
presser foot, and set the stitch width 5.5 mm (7/32 inch)
and sew using stitch .
For a seam allowance on the left side
Align the left side of the presser foot with the edge of the
fabric, and set the stitch width 1.5 mm (1/16 inch) and
sew using stitch .
Quilting
Sandwiching batting between the top and bottom layers of
fabric is called “quilting”. Quilts can easily be sewn using the
walking foot* and the quilting guide*.
* Items sold separately, please contact your authorized
Brother dealer.
a
Baste the fabric to be quilted.
b
Remove the presser foot and the presser foot holder.
For details, refer to “Removing and attaching the
presser foot holder” on page 22.
c
Hook the connecting fork of the walking foot onto the
needle clamp screw.
d
Lower the presser foot lever, and then tighten the
presser foot holder screw with the screwdriver.
e
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
No. 25
Stitch
1 6.5 mm (1/4 inch)
1 6.5 mm (1/4 inch)
Memo
To change the width of the seam allowance (needle
position), adjust the stitch width. For details, refer to
“Setting the stitch width” on page 29 and “Sewing an
even seam allowance” on page 31.
1
1
Note
Thread the needle manually when using the walking
foot, or attach the walking foot only after threading the
needle using the needle threader.
When quilting, use a 90/14 home sewing machine
needle.
The walking foot can only be used with straight or
zigzag stitch patterns. Do not sew reverse stitches with
the walking foot.
When sewing with the walking foot, sew at a speed
between slow and medium.
When using the walking foot, test sew on a scrap piece
of fabric that is to be used in project.
1 Connecting fork
2 Needle clamp screw
CAUTION
Be sure to securely tighten the screws with the
screwdriver, otherwise the needle may touch
the presser foot, causing it to bend or break.
Before starting to sew, slowly turn the
handwheel toward you (counterclockwise)
and
check that the needle does not touch the
presser foot. If the needle hits the presser foot,
the needle may bend or break.
No. 04 28
Stitch
a
b
Utility stitches
49
VARIOUS STITCHES
3
f
Place one hand on each side of the presser foot, and
then evenly guide the fabric while sewing.
Using the quilting guide (sold separately)
Use the quilting guide to sew parallel stitches that are
equally spaced.
a
Insert the stem of the quilting guide into the hole at the
rear of the walking foot or presser foot holder.
b
Adjust the stem of the quilting guide so that the guide
aligns with the seam that has already been sewn.
Free motion quilting
We recommend attaching the foot controller and sewing at a
consistent speed. You can adjust the sewing speed with the
speed control slide on the machine.
The quilting foot* is used for free motion quilting with
zigzag or decorative stitches or for free motion quilting of
straight lines on fabric with an uneven thickness.
* Items sold separately, please contact your authorized
Brother dealer.
a
Slide the feed dog position switch, located at the rear
of the machine on the base, to (to the left as seen
from the rear of the machine).
The feed dogs are lowered.
b
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
c
Remove the presser foot holder.
For details, refer to “Removing and attaching the
presser foot holder” on page 22.
d
Attach the quilting foot by positioning the pin of the
quilting foot above the needle clamp screw and
aligning the lower-left of the quilting foot and the
presser bar.
e
Hold the quilting foot in place with your right hand,
and tighten the presser foot holder screw using the
screwdriver with your left hand.
Walking foot Presser foot holder
CAUTION
With free motion quilting, control the feeding
speed of the fabric to match the sewing speed.
If the fabric is moved faster than the sewing
speed, the needle may break or other damage
may result.
Quilting foot
No. 04 28
Stitch
1 Pin
2 Needle clamp screw
3 Presser bar
Note
Make sure that the quilting foot is not slanted.
1 Presser foot holder
screw
CAUTION
Be sure to securely tighten the screws with the
included screwdriver. Otherwise, the needle
may touch the quilting foot, causing it to bend
or break.
a
b
c
Utility stitches
50
f
Use both hands to stretch the fabric taut, and then
move the fabric at a consistent pace in order to sew
uniform stitches roughly 2.0 mm - 2.5 mm (approx.
1/16 inch - 3/32 inch) in length.
g
After sewing is finished, slide the feed dog position
switch lever to (to the right as seen from the rear
of the machine) and turn the handwheel to raise the
feed dogs.
Satin stitching using the sewing speed
controller
Satin stitching can be sewn by adjusting the stitch width while
sewing a zigzag stitch. The machine can be set so that the
stitch width can be adjusted using the sewing speed
controller.
a
Connect the foot controller.
b
Attach zigzag foot “J”.
c
Press , display the second page of the settings
screen, and then set (Width Control) to [ON].
The machine is set so that the stitch width can be
adjusted using the sewing speed controller.
d
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
e
While sewing, slide the sewing speed controller to
adjust the stitch width.
Adjust the sewing speed with the foot controller.
f
When you are finished sewing, set (Width
Control) in the settings screen back to [OFF].
Other Stitching Applications
Elastic attaching
When elastic tape is attached to the cuff or waist of a piece of
clothing, the finished dimensions will be that of the stretched
elastic tape. Therefore, it is necessary that a suitable length of
the elastic tape be used.
a
Pin the elastic tape to the wrong side of the fabric.
Pin the elastic tape to the fabric at a few points to make
sure that the tape is uniformly positioned on the fabric.
b
Attach zigzag foot “J”.
c
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
d
Sew the elastic tape to the fabric while stretching the
tape so that it is the same length as the fabric.
While pulling the fabric behind the presser foot with
your left hand, pull the fabric at the pin nearest the front
of the presser foot with your right hand.
1 Stitch
No. 28
Stitch
Memo
Although the stitching results differ depending on the
type of fabric being sewn and the thickness of the
thread being used, for best results, adjust the stitch
length to between 0.3 and 0.5 mm (1/64 and 1/32 inch).
a
1 Narrower
2 Wider
No. 11 12 43
Stitch
ba
Utility stitches
51
VARIOUS STITCHES
3
Bar tack stitching
Bar tacks are used to reinforce points subject to strain, such as
pocket corners and openings.
As an example, the procedure for sewing bar tacks at pocket
corners is described below.
a
Determine the desired length of the bar tack.
Set the button guide plate on buttonhole foot “A” to the
desired length. (The distance between the markings on
the presser foot scale is 5 mm (3/16 inch).)
A bar tack with a maximum length of about 28 mm
(1–1/8 inches) can be sewn.
b
Attach buttonhole foot “A”.
Position the upper thread under the presser foot by
guiding thread through the hole in the presser foot
before attaching the buttonhole foot “A”.
c
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
d
Position the fabric so that the opening of the pocket
faces toward you, and then lower the presser foot lever
so that the needle drops 2 mm (1/16 inch) in front of
the pocket opening.
e
Pull down the buttonhole lever as far as possible.
f
Gently hold the end of the upper thread in your left
hand, and then start sewing.
g
After sewing is finished, raise the presser foot lever,
remove the fabric, and then cut the threads.
h
Raise the buttonhole lever to its original position.
Darning
1 Reinforcement stitching
a
Determine the desired length of the darning.
Set the button guide plate on buttonhole foot “A” to the
desired length. (The distance between the markings on
the presser foot scale is 5 mm (3/16 inch).)
A bar tack with a maximum length of about 28 mm
(1-1/8 inches) can be sewn.
Once sewing is completed, the machine
automatically sews reinforcement stitches, then
stops.
b
Attach buttonhole foot “A”.
Position the upper thread under the presser foot by
guiding thread through the hole in the presser foot
before attaching the buttonhole foot “A”.
c
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
CAUTION
When sewing, be sure that the needle does not
touch any pins, otherwise the needle may bend
or break.
1 Presser foot scale
2 Length of bar tack
3 5 mm (3/16 inch)
No. 69
Stitch
1 2 mm (1/16 inch)
3
1
2
1
1 Presser foot scale
2 Length of darning
3 5 mm (3/16 inch)
4 7 mm (1/4 inch)
No. 68
Stitch
3
1
2
4
Utility stitches
52
d
Position the fabric so that the needle is 2 mm (1/16
inch) in front of the area to be darned, and then lower
the presser foot.
e
Pull down the buttonhole lever as far as possible.
f
Gently hold the end of the upper thread in your left
hand, and then start sewing.
g
After sewing is finished, raise the presser foot lever,
remove the fabric, and then cut the threads.
h
Raise the buttonhole lever to its original position.
Eyelet Stitching
Eyelets, such as those on belts, can be sewn.
a
Attach monogramming foot “N”.
b
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
c
Adjust either the stitch width or the stitch length to
select the desired eyelet size.
For details, refer to “Setting the stitch width” on
page 29 and “Setting the stitch length” on page 29.
d
Lower the needle into the fabric at the beginning of the
stitching, and then lower the presser foot lever.
e
Start sewing.
Once sewing is completed, the machine
automatically sews reinforcement stitches, then
stops.
f
After removing the fabric, use the eyelet punch to cut a
hole in the center of the eyelet.
When using the eyelet punch, place thick paper or
some other protective sheet under the fabric before
punching the hole in the fabric.
Fagoting
Stitching across an open seam is called “fagoting”. It is used
on blouses and children's clothing. This stitch is more
decorative when thicker thread is used.
a
Use an iron to fold the two pieces of fabric along their
seams.
b
Baste the two pieces of fabric, separated by about 4
mm (3/16 inch), onto thin paper or a sheet of water
soluble stabilizer.
If you draw a line down the middle of the thin paper, or
water soluble stabilizer, sewing is easier.
c
Attach zigzag foot “J”.
d
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
e
Set the stitch width to 7.0 mm (1/4 inch).
f
Sew with the center of the presser foot aligned along
the center of the two pieces of fabric.
g
After sewing is finished, remove the paper.
1 Tear
2 2 mm (1/16 inch)
No. 71
Stitch
2
1
1 Thin paper or water
soluble stabilizer
2 Basting stitching
3 4 mm (3/16 inch)
No. 41 42
Stitch
2
1
3
Utility stitches
53
VARIOUS STITCHES
3
Scallop stitching
The wave-shaped repeated stitch pattern that looks like shells
is called “scalloping”. It is used on the collars of blouses and
to decorate the edges of projects.
a
Attach monogramming foot “N”.
b
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
c
Stitch along the edge of the fabric, making sure not to
sew directly on the edge of the fabric.
d
Trim along the stitches.
Be careful not to cut the stitches.
Smocking
The decorative stitch created by stitching or embroidering
over gathers is called “smocking”. It is used to decorate the
front of blouses or cuffs.
The smocking stitch adds texture and elasticity to fabric.
a
Attach zigzag foot “J”.
b
Select the straight stitch, and then adjust the stitch
length to 4.0 mm (3/16 inch) and loosen the thread
tension.
c
Sew parallel stitching at intervals of 1 cm (3/8 inch)
and pull the bobbin threads to create gathers.
Smooth the gathers by ironing them.
d
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
e
Stitch between the straight stitches and pull out the
threads for the straight stitches.
Shell tuck stitching
The gathers that look like shells are called “shell tucks”. They
are used to decorate trims, the front of blouses or cuffs made
of thin fabrics.
a
Draw equally spaced lines along the bias, and then fold
the fabric along the lines.
b
Attach zigzag foot “J”.
c
Select a stitch, and then increase the thread tension.
For details, refer to “Stitch Chart” on page 35.
d
Sew while making sure that the needle drops slightly
off the edge of the fabric.
One fold at a time, continue folding the fabric along the
line, then sewing it.
e
After sewing is finished, remove the fabric. Unfold the
fabric, and then iron the tucks down to one side.
Joining
Decorative bridging stitches can be sewn over the seam
allowance of joined fabrics. This is used when making a crazy
quilt.
a
Attach zigzag foot “J”.
b
Sew together the right sides of the two pieces of fabric,
and then open up the seam allowances.
No. 36
Stitch
No. 40 41 42
Stitch
No. 35
Stitch
1 Needle drop point
a
Utility stitches
54
c
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
d
Turn the fabric over so that the right side faces up, and
then sew over the seam with the center of the presser
foot aligned with the seam.
Using the twin needle
With the twin needle, you can sew two parallel lines of the
same stitch with two different threads. Both upper threads
should have the same thickness and quality.
a
Lower the presser foot lever.
b
Press and Install the twin needle.
For details on installing a needle, refer to “Replacing
the Needle” on page 20.
c
Pass the first upper thread behind the needle bar
thread guide.
For details, refer to steps a through k of
“Threading the upper thread” on page 16.
d
Manually thread the left needle with the first upper
thread.
Insert the thread through the eye of the needle from the
front to the back.
e
Put the extra spool pin in the hole on the top of the
machine and put the spool of thread onto the extra
spool pin.
f
Thread the machine with the second upper thread.
Without passing the thread behind the needle bar
thread guide, manually thread the right needle with the
second upper thread.
Insert the thread through the eye of the needle from the
front to the back.
g
Attach zigzag foot “J”.
For details on changing the presser foot, refer to
“Replacing the presser foot” on page 21.
h
Press to unlock all keys and buttons.
i
Press , display the first page of the settings screen,
and then set (Twin Needle) to [ON].
j
Press .
No. 37 38 39
Stitch
CAUTION
Only use the twin needle (2/11 needle, part
code: X59296-121), and never use the needle
threader with the twin needle.
Otherwise, the needle may break or the
machine may be damaged.
For stitch patterns that can use the twin
needle, refer to the “Stitch Chart” on page 35.
After specifying the settings, turn the
handwheel toward you and check that the
needle does not touch the presser foot.
1 Thread spool
2 Extra spool pin
1 Needle bar
thread
guide
CAUTION
When using the twin needle, be sure to attach
zigzag foot “J”.
CAUTION
When using the twin needle, be sure to select
the twin needle setting, otherwise the needle
may break or the machine may be damaged.
a
b
a
Making adjustments
55
VARIOUS STITCHES
3
k
Select a stitch.
For stitch selection refer to “Basic sewing” on
page 25.
Refer to “Stitch Chart” on page 35 for stitches that
can be sewn with a twin needle. You can also sew
with a twin needle when you select a satin stitch
pattern. In this case, use zigzag foot “J”.
l
Start sewing.
Heirloom stitching
When sewing with the wing needle, the needle holes are
enlarged, creating a lace-like decorative stitch. This is used to
decorate hems and tablecloths on thin or medium weight
fabrics in addition to plain weave fabrics.
a
Install the wing needle.
Use a 130/705H 100/16 wing needle.
For details on installing a needle, refer to “Replacing
the needle” on page 20.
The needle threader cannot be used with the wing
needle, otherwise the machine may be damaged.
Manually pass the thread through the eye of the
needle from the front to the back.
b
Attach monogramming foot “N”.
c
Select a stitch.
For details, refer to “Stitch Chart” on page 35.
d
Start sewing.
Your stitch pattern may sometimes turn out poorly, depending
on the type or thickness of fabric, the stabilizer material used,
sewing speed, etc. If your sewing does not turn out well, sew
trial stitches using the same conditions as the real sewing, and
adjust the stitch pattern as explained below. If the stitch
pattern does not turn out well even after making adjustments
based on the stitch pattern described below, make
adjustments for each stitch pattern individually.
a
Select (No. 99) of category (decorative stitch
patterns).
b
Attach monogramming foot “N” and sew the stitch
pattern.
c
Compare the finished stitch pattern to the illustration
of the correct stitch pattern below.
CAUTION
When using the twin needle, be sure to select
an appropriate stitch, otherwise the needle
may break or the machine may be damaged.
CAUTION
Do not try turning the fabric while the twin
needle is down in the fabric, otherwise the
needle may break or the machine may be
damaged.
If bunched stitches occur, use monogramming
foot “N” or attach stabilizer material.
No. 49 51 53 57
Stitch
CAUTION
When sewing with the wing needle, select a
stitch width of 6.0 mm (15/64 inch) or less,
otherwise the needle may bend or break.
After adjusting the stitch width, slowly turn
the handwheel toward you (
counterclockwise)
and check that the needle does not touch the
presser foot. If the needle hits the presser foot,
the needle may bend or break.
Making adjustments
Memo
This adjustment can be made to (Quilting stippling
stitch), (eyelet stitch), decorative stitches and
character stitches. For details on the built-in stitch
patterns, refer to “Stitch Chart” on page 35.
Note
Be sure to use monogramming foot “N”. Adjustments
may not be made correctly with any other presser foot.
Using The Memory Function
56
d
Press to adjust the vertical position.
If the stitch pattern is bunched:
Press the “+” stitch length key.
The displayed value increases each time the button is
pressed and the stitch pattern will lengthen.
If the stitch pattern has gaps:
Press the “–” stitch length key.
The displayed value decreases each time the button
is pressed and the stitch pattern will shorten.
e
Sew the stitch pattern again.
If the stitch pattern still comes out poorly, make
adjustments again. Adjust until the stitch pattern
comes out correctly.
Saving stitch patterns
You can save stitch patterns that you have customized in the
machine's memory
a
Press .
The list of pockets (locations for saving stitch
patterns) appears, and an empty pocket is selected.
b
Press or to select the pocket where
the stitch pattern is to be saved, and then press .
Retrieving stitch patterns
Retrieve stitch patterns saved in the machine's memory.
a
Press once or twice until a list of saved stitch
patterns like the one shown below is displayed.
b
Select the desired saved stitch pattern using or
.
The selected pocket is shown in reverse highlighting,
and the stored stitch pattern is displayed.
Note
Sewing speed controller cannot be used with this stitch
pattern.
Memo
Stitch pattern adjustments can also be made in the
settings screen.
Press , display the fifth page of the settings screen,
and then press to adjust the vertical position.
Using The Memory Function
Note
Do not turn the main power to OFF while the stitch
patterns is being stored. You will lose the stitch pattern
you are saving.
Memo
If the stitch pattern is saved in a pocket where a stitch is
already saved, the stitch is overwritten.
If an empty pocket is not available, select a pocket
which contains a stitch pattern that can be overwritten.
Use to scroll the selected pocket horizontally to
confirm the whole stitch pattern.
Once the stitch pattern has been saved in pocket, it can
not be deleted without overwriting. When you wish to
delete a stitch pattern in the pocket, press without
selecting a stitch pattern.
Care and Maintenance
57
APPENDIX
4
If the surface of the machine is dirty, lightly soak a cloth in
neutral detergent, squeeze it out firmly, and then wipe the
surface of the machine. After cleaning it once with a damp
cloth, wipe it again with a dry cloth.
If the screen is dirty, gently wipe it with a soft, dry cloth. Do
not wipe the LCD screen with a damp cloth. Do not use
organic solvents or detergents.
Restrictions on oiling
In order to prevent damaging this machine, it must not be
oiled by the user.
This machine was manufactured with the necessary amount
of oil applied to ensure correct operation, making periodic
oiling unnecessary.
If problems occur, such as difficulty turning the handwheel or
an unusual noise, immediately stop using the machine, and
contact your authorized Brother dealer or the nearest Brother
authorized service center.
Precautions on storing the machine
Do not store the machine in any of the locations described
below, otherwise damage to the machine may result, for
example, rust caused by condensation.
Exposed to extremely high temperatures
Exposed to extremely low temperatures
Exposed to extreme temperature changes
Exposed to high humidity or steam
Near a flame, heater or air conditioner
Outdoors or exposed to direct sunlight
Exposed to extremely dusty or oily environments
Cleaning the race
Sewing performance will suffer if lint and dust collects in the
bobbin case, therefore, it should be cleaned regularly.
a
Press (Needle position button) to raise the needle.
b
Turn off the machine.
c
Unplug the power cord from the power supply jack on
the right side of the machine.
d
Raise the presser foot to remove the needle, presser
foot and presser foot holder.
For details, refer to “Replacing the Needle” on
page 20 and “Replacing the Presser Foot” on
page 21.
e
Remove the flat bed attachment if it is attached.
f
Remove the bobbin cover.
g
Place the index finger of your right hand near the
bottom of the latch on the needle plate cover.
Insert the tip of the index finger of your left hand into
the notch at the back of the needle plate cover.
Place the thumb of your left hand at the front of the
needle plate cover.
h
Slide the needle plate cover toward you to remove it.
Chapter 4
APPENDIX
Care and Maintenance
CAUTION
Unplug the power cord before cleaning the
machine, otherwise injuries or an electric
shock may occur.
Note
In order to extend the life of this machine, periodically
turn it on and use it.
Storing this machine for an extended period of time
without using it may reduce its efficiency.
Care and Maintenance
58
i
Grasp the bobbin case, and then pull it out.
j
Use the cleaning brush or a vacuum cleaner to remove
any lint and dust from the race and the surrounding
area.
1 Cleaning brush
2 Race
Do not apply oil to the bobbin case.
k
Insert the bobbin case so that the
mark on the
bobbin case aligns with the
mark on the machine.
Align the and
marks.
1 mark
2
mark
3 Bobbin case
Make sure that the indicated points are aligned
before installing the bobbin case.
l
Insert the tabs on the needle plate cover into the
needle plate, and then slide the cover back on.
m
Reattach the bobbin cover.
a
b
a
b
ab
c
CAUTION
Never use a bobbin case that is scratched,
otherwise the upper thread may become
tangled, the needle may break or sewing
performance may suffer. For a new bobbin
case, contact your nearest Brother authorized
service center.
Be sure that the bobbin case is correctly
installed, otherwise the needle may break.
Troubleshooting
59
APPENDIX
4
If the machine stops operating correctly, check the
following possible problems before requesting service.
You can solve most problems by yourself. If you need
additional help, the Brother Solutions Center offers the
latest FAQs and troubleshooting tips. Visit us at “ http://
s.brother/cpjag/ ”.
If the problem persists, contact your Brother dealer or the
nearest Brother authorized service center.
Frequent troubleshooting topics
Detailed causes and remedies for common troubleshooting
topics are described below. Be sure to refer to this before
contacting us.
Upper thread tightened up
Symptom
The upper thread appears as a single continuous line.
The bobbin thread is visible from the right side of the
fabric. (Refer to the illustration below.)
The upper thread has tightened up, and comes out
when pulled.
The upper thread has tightened up, and wrinkles
appear in the fabric.
The upper thread tension is tight, and the results do
not change even after the thread tension is adjusted.
1 Wrong side of fabric
2 Bobbin thread visible from right side of fabric
3 Upper thread
4 Right side of fabric
5 Bobbin thread
Cause
Incorrect bobbin threading
If the bobbin thread is incorrectly threaded, instead of the
appropriate tension being applied to the bobbin thread, it
is pulled through the fabric when the upper thread is
pulled up. For this reason, the thread is visible from the
right side of the fabric.
Remedy/check details
Correctly install the bobbin thread. (page 14)
Tangled thread on wrong side of fabric
Symptom
The thread becomes tangled on the wrong side of the
fabric.
After starting sewing, a rattling noise is made and
sewing cannot continue.
Looking under the fabric, there is tangled thread in
the bobbin case.
Troubleshooting
Upper thread tightened up page 59
Tangled thread on wrong side of fabric page 59
Incorrect thread tension page 60
Fabric is caught in the machine and cannot
be removed
page 61
If the thread becomes tangled under the
bobbin winder seat
page 63
a
b
c
d
e
Troubleshooting
60
Cause
Incorrect upper threading
If the upper thread is incorrectly threaded, the upper
thread passed through the fabric cannot be firmly pulled
up and the upper thread becomes tangled in the bobbin
case, causing a rattling noise.
Remedy/check details
Remove the tangled thread, and then correct the upper
threading.
a
Remove the tangled thread. If it cannot be removed,
cut the thread with scissors.
For details, refer to “Cleaning the race” on page 57.
b
Remove the upper thread from the machine.
c
Correct the upper threading by following the
instructions in “Threading the upper thread” on
page 16.
If the bobbin was removed from the bobbin case,
refer to “Installing the bobbin” on page 14 to
correctly install the bobbin.
Incorrect thread tension
Symptoms
Symptom 1: The bobbin thread is visible from the
right side of the fabric. (Refer to illustration below)
Symptom 2: The upper thread appears as a straight
line on the right side of the fabric.
Symptom 3: The upper thread is visible from the
wrong side of the fabric. (Refer to illustration below)
Symptom 4: The bobbin thread appears as a straight
line on the wrong side of the fabric.
Symptom 5: The stitching on the wrong side of the
fabric is loose or has slack.
1 Wrong side of fabric
2 Bobbin thread visible from right side of fabric
3 Upper thread
4 Right side of fabric
5 Bobbin thread
6 Upper thread visible from wrong side of fabric
Cause/remedy/check details
Cause 1
The machine is not correctly threaded.
<With symptoms 1 and 2 described above>
The bobbin threading is incorrect.
Return the thread tension dial to “4”, and then refer to
“Upper thread tightened up” on page 59 to correct the
threading.
<With symptoms 3 and 5 described above>
The upper threading is incorrect.
Return the thread tension dial to “4”, and then refer to
“Tangled thread on wrong side of fabric” on page 59 to
correct the upper threading.
Cause 2
A needle and thread appropriate for the fabric are not
being used.
The machine needle that should be used depends on the
type of fabric sewn and the thread thickness.
If a needle and thread appropriate for the fabric are not
being used, the thread tension will not be adjusted
correctly, causing wrinkles in the fabric or skipped
stitches.
Refer to “Fabric/Thread/Needle Combinations” on
page 19 to check that a needle and thread
appropriate for the fabric are being used.
Cause 3
An appropriate upper tension is not selected.
Select an appropriate thread tension.
Refer to “Adjusting the thread tension” on page 30.
The appropriate thread tension differs depending on the
type of fabric and thread being used.
* Adjust the thread tension while test sewing on a
piece of scrap fabric that is the same as that used in
your project.
If the bobbin thread is visible from the right side of
the fabric
Turn the thread tension dial counterclockwise to
loosen the upper thread tension.
If the upper thread is visible from the wrong side of
the fabric
Turn the thread tension dial clockwise to tighten the
upper thread tension.
Symptom 1 Symptom 3
a
b
c
d
e
a
f
c
d
e
Note
If the upper threading and bobbin threading are
incorrect, the thread tension cannot be adjusted
correctly. Check the upper threading and bobbin
threading first, and then adjust the thread tension.
Troubleshooting
61
APPENDIX
4
Fabric is caught in the machine and cannot
be removed
If the fabric is caught in the machine and cannot be removed,
the thread may have become tangled under the needle plate.
Follow the procedure described below to remove the fabric
from the machine. If the operation cannot be completed
according to this procedure, instead of attempting to remove it
forcefully, contact your nearest Brother authorized service
center.
Removing the fabric from the machine
a
Immediately stop the machine.
b
Turn off the machine.
c
Remove the needle.
If the needle is lowered into the fabric, turn the
handwheel away from you (clockwise) to raise the
needle out of the fabric, and then remove the needle.
Refer to “Replacing the Needle” on page 20.
d
Remove the presser foot and presser foot holder.
If the thread is entangled on the presser foot, remove the
entangled thread, and then raise the presser foot lever to
remove the presser foot. Otherwise, the presser foot may
be damaged.
Refer to “Replacing the Presser Foot” on page 21.
e
Lift up the fabric and cut the threads below it.
If the fabric can be removed, remove it. Continue with
the following steps to clean the race.
f
Remove the needle plate cover.
Refer to “Cleaning the race” on page 57.
g
Cut out the tangled threads, and then remove the
bobbin.
h
Remove the bobbin case.
If threads remain in the bobbin case, remove them.
i
Use the cleaning brush or a vacuum cleaner mini
attachment to remove any lint or dust from the race
and its surrounding area.
j
Use the included disc-shaped screwdriver to loosen the
two screws on the needle plate.
k
Slightly lift up the needle plate, cut any tangled
threads, and then remove the needle plate.
Remove the fabric and threads from the needle plate.
If the fabric cannot be removed, even after completing
these steps, contact your nearest Brother authorized
service center.
1 Cleaning brush
2 Race
If the fabric could be removed. Continue with step p.
If the fabric could not be removed. Continue with step j.
Note
Compressed can air is not recommended to be used.
Note
Be careful not to drop the removed screws in the
machine.
a
b
Troubleshooting
62
l
Remove any threads in the race and around the feed
dogs.
m
Turn the handwheel to raise the feed dogs.
n
Align the two screw holes in the needle plate with the
two holes at the needle plate mounting base, and then
fit the needle plate onto the machine.
o
Lightly finger-tighten the screw on the right side of the
needle plate. Then, use the disc-shaped screwdriver to
firmly tighten the screw on the left side. Finally, firmly
tighten the screw on the right side.
Turn the handwheel to check that the feed dogs move
smoothly and do not contact the edges of the slots in the
needle plate.
1 Correct position of feed dogs
2 Incorrect position of feed dogs
p
Insert the bobbin case by following step k in
“Cleaning the race” on page 57.
q
Attach the needle plate cover according to step l in
“Cleaning the race” on page 57.
r
Check the condition of the needle, and then install it.
If the needle is in a poor condition, for example, if it is
bent, be sure to install a new needle.
Refer to “Checking the needle” on page 20 and
“Replacing the needle” on page 20.
Checking machine operations
If the needle plate has been removed, check machine
operations to confirm that installation has been completed
correctly.
a
Turn on the machine.
b
Select stitch .
c
Slowly turn the handwheel toward you
(counterclockwise), and look from all sides to check
that the needle falls at the center of the opening in the
needle plate.
If the needle contacts the needle plate, remove the
needle plate, and then install it again, starting with step
m in “Removing the fabric from the machine” on
page 61.
d
Select stitch . At this time, increase the stitch length
and width to their maximum settings.
For details on changing the settings, refer to “Setting
the stitch width” on page 29 and “Setting the stitch
length” on page 29.
e
Slowly turn the handwheel toward you
(counterclockwise) and check that the needle bar and
feed dogs operate correctly.
If the needle or feed dogs contact the needle plate, the
machine may be malfunctioning; therefore, contact
your nearest Brother authorized service center.
f
Turn off the machine, and then install the bobbin and
presser foot.
Never use a scratched or damaged presser foot.
Otherwise, the needle may break, or sewing
performance may suffer.
Refer to “Installing the bobbin” on page 14 and
“Replacing the presser foot” on page 21.
g
Correctly thread the machine.
For details on threading the machine, refer to “Upper
Threading” on page 16.
h
Perform trial sewing with cotton fabric.
Memo
Since the needle may have been damaged when the
fabric was caught in the machine, we recommend
replacing it with a new one.
Note
Do not yet install the presser foot and thread.
a
b
1 Opening in the needle
plate
2 Handwheel
Note
Incorrect sewing may be the result of incorrect upper
threading or sewing thin fabrics. If there are poor results
from the trial sewing, check the upper threading or the
type of fabric being used.
a
b
Troubleshooting
63
APPENDIX
4
If the thread becomes tangled under the
bobbin winder seat
If the bobbin winding starts when the thread is not passed
under the pretension disk of the bobbin-winding thread guide
correctly, the thread may become tangled under the bobbin
winder seat.
a
Stop the bobbin winding.
b
Cut the thread with scissors beside the bobbin-winding
thread guide.
c
Slide the bobbin winder shaft to the left, and then
remove the bobbin from the shaft and cut the thread
leading to the bobbin in order to be able to completely
remove the bobbin from shaft.
d
Hold the thread end with your left hand, and wind off
the thread clockwise from under the bobbin winder
seat with your right hand as shown below.
List of symptoms
Check the following possible problems before requesting
service. If the reference page is “*”, contact your authorized
Brother dealer or the nearest Brother authorized service
center.
Getting ready
CAUTION
Do not remove the bobbin winder seat even if
the thread become tangled under the bobbin
winder seat. Otherwise, the cutter in the
bobbin winder seat may be damaged.
Do not remove the screw on the bobbin
winder guide post, otherwise the machine may
be damaged; you cannot wind off the thread
by removing the screw.
1 Screw of the bobbin winder guide post
a
Symptom, Cause/solution
Reference
Cannot thread the needle.
Needle is not in the correct position.
Press the “Needle position” button to raise the
needle.
6
Needle is installed incorrectly. 20
Needle is turned, bent or the point is dull. 20
Upper threading is incorrect.
The needle threader lever is not lowered until it
clicks.
16
The needle threader hook is bent and does not
pass through the eye of the needle.
*
The needle threader lever cannot be moved or
returned to its original position.
*
A size 65/9 needle is being used.
The needle is incompatible with the needle
threader. Manually pass the thread through the
eye of the needle.
17
Bobbin thread does not wind neatly on the bobbin.
The thread is not passed through the bobbin
winding thread guide correctly.
12
The thread that was pulled out from the bobbin-
winding thread guide was incorrectly wound onto
the bobbin.
13
The empty bobbin was not set on the pin
properly.
12
While winding the bobbin, the bobbin thread was
wound below the bobbin winder seat.
The thread was incorrectly passed under the
pretension disk on the bobbin-winding thread
guide.
Remove any entangled thread, and then wind
the bobbin.
12, 63
The bobbin thread cannot be pulled up.
Needle is turned, bent or the point is dull. 20
Bobbin is set incorrectly. 14
Nothing appears in the LCD.
Main power switch is not turned on. 9
The plug of the power cord is not inserted into an
electrical outlet.
9
Troubleshooting
64
While sewing
The LCD screen is fogged up.
Condensation has formed on the LCD screen.
After a while, the cloudiness will disappear.
The operation keys do not respond, or the key
response is too sensitive.
A glove is worn when the keys are pressed.
The keys are pressed with a fingernail.
A non-electrostatic touch pen is being used.
The sensitivity of the operation keys is not set for
the user.
6, 12
The sewing light does not come on.
(Light) is set to [OFF] in the settings screen.
11
Symptom, Cause/solution
Reference
Machine does not operate.
“Start/Stop” button was not pressed. 25
The bobbin winder shaft is pushed to the right. 12
There is no stitch selected. 25
Presser foot is not lowered. 25
“Start/Stop” button was pressed with the foot
controller attached.
26
The “Start/Stop” button was pressed while the
machine is set for the sewing speed controller to
control the zigzag stitch width.
11, 50
Needle breaks.
Needle is installed incorrectly. 20
Needle clamp screw is not tightened. 20
Needle is turned or bent. 20
Using improper needle or thread for the selected
fabric.
19
Wrong presser foot was used. 21, 35
Upper thread tension is too tight. 30
Fabric is pulled during sewing.
Spool of thread is set incorrectly. 12
Symptom, Cause/solution
Reference
There are scratches around the opening in the
needle plate.
* There is a notch on the left side of the opening
in the needle plate. This is not a scratch.
*
There are scratches around the opening in the
presser foot.
*
There are scratches on the bobbin case. *
A bobbin designed specifically for this machine is
not used.
12
Upper threading is incorrect. 16
Bobbin is set incorrectly. 14
Presser foot is attached incorrectly. 21
Screw of the presser foot holder is loose. 22
Fabric is too thick. 19, 32
Fabric is fed forcefully when sewing thick fabric
or thick seams.
32
Stitch length is too short. 29
Bobbin thread is incorrectly wound. 12
Upper thread breaks.
Machine is not threaded correctly (used the
wrong spool cap, spool cap is loose, the thread
did not catch the needle bar threader, etc.).
16
Knotted or tangled thread is being used.
The selected needle is not appropriate for the
thread being used.
19
Upper thread tension is too tight. 30
Thread is tangled. 59
Needle is turned, bent or the point is dull. 20
Needle is installed incorrectly. 20
There are scratches around the opening of the
needle plate.
* There is a notch on the left side of the opening
in the needle plate. This is not a scratch.
*
There are scratches around the opening in the
presser foot.
*
Symptom, Cause/solution
Reference
1 Notch
a
1 Notch
a
Troubleshooting
65
APPENDIX
4
There are scratches on the bobbin case. *
Using improper needle or thread for the selected
fabric.
19
A bobbin designed specifically for this machine is
not used.
12
The thread is tangled on the wrong side of the fabric.
Upper threading is incorrect. 16, 60
Using improper needle or thread for the selected
fabric.
19
The upper thread is too tight.
The bobbin thread is incorrectly installed. 14, 59
Bobbin thread breaks.
Bobbin is set incorrectly. 14
Bobbin thread is incorrectly wound. 12
A scratched bobbin is being used.
Replace the bobbin.
14
Thread is tangled. 61
A bobbin designed specifically for this machine is
not used.
12
Fabric puckers.
There is a mistake in the upper or bobbin
threading.
12, 16
Spool of thread is set incorrectly. 16
Using improper needle or thread for the selected
fabric.
19
Needle is turned, bent or the point is dull. 20
Stitches are too long when sewing thin fabrics. 29
Thread tension is set incorrectly. 30, 60
Wrong presser foot was used. 21, 35
The stitch is not sewn correctly.
The presser foot that is used is not appropriate
for the type of stitch that you wish to sew.
21
The thread tension is incorrect.
30, 60
The thread is tangled, for example, in the bobbin
case.
61
Feed dogs are set in the down position.
Slide the feed dog position switch to the right
().
5, 49
Skipped stitches
Machine is threaded incorrectly. 12, 16
Symptom, Cause/solution
Reference
Using improper needle or thread for the selected
fabric.
19
Needle is turned, bent or the point is dull. 20
Needle is installed incorrectly. 20
Dust or lint has collected under the needle plate. 57
Thin or stretch fabrics are being sewn.
Sew with non-woven water soluble stabilizer
under the fabric.
32
Not stitching
Needle is turned, bent or the point is dull. 20
Bobbin is set incorrectly. 14
Upper threading is incorrect. 16
High-pitched sound while sewing
Dust or lint is caught in the feed dogs. 57
Pieces of thread are caught in the race. 57
Upper threading is incorrect. 16
A bobbin designed specifically for this machine is
not used.
12
There are needle holes or friction scratches in the
bobbin case.
*
Fabric does not feed through the machine.
Feed dogs are set in the down position.
Slide the feed dog position switch to the right
().
5, 49
Stitches are too close together. 29
Wrong presser foot was used. 21, 35
Needle is turned, bent or the point is dull. 20
Thread is entangled. 61
Zigzag foot “J” is slanted on a thick seam at the
beginning of stitching.
32
The fabric feeds in the opposite direction.
The feed mechanism is damaged. *
The needle contacts the needle plate.
The needle clamp screw is loose. 20
Needle is turned, bent or the point is dull. 20
Fabric being sewn with the machine cannot be
removed.
Thread is tangled below the needle plate. 61
Symptom, Cause/solution
Reference
Troubleshooting
66
After sewing
A broken needle has fallen into the machine.
Turn off the machine, and remove the needle
plate. If the needle that fell into the machine
can be seen, use tweezers to remove it. After
removing the needle, return the needle plate to
its original position and insert a new needle.
Before turning on the machine, slowly turn the
handwheel toward you to check that it turns
smoothly and that the new needle enters
through the center of the needle plate opening.
If the handwheel does not turn smoothly or the
needle that fell into the machine cannot be
removed, consult your authorized Brother
dealer or the nearest Brother authorized
service center.
61
The handwheel does not turn smoothly.
Thread is tangled in the bobbin case. 57, 59,
61
Symptom, Cause/solution
Reference
Thread tension is incorrect.
Upper threading is incorrect. 16, 60
Bobbin is set incorrectly. 14, 60
Using improper needle or thread for the selected
fabric.
19
Presser foot holder is not attached correctly. 22
Thread tension is set incorrectly. 30, 60
Bobbin thread is incorrectly wound. 14
Needle is turned, bent or the point is dull. 20
A bobbin designed specifically for this machine is
not used.
12
Character or decorative stitch patterns are
misaligned.
Wrong presser foot was used. 21, 35
Stitch pattern adjustment settings were set
incorrectly.
55
Stitch pattern is irregular.
Wrong presser foot was used. 21, 35
Thin or stretch fabrics are being sewn.
Attach stabilizer material to the fabric.
32
Thread tension is set incorrectly. 30, 60
Fabric was pulled, pushed or fed at an angle
while it was being sewn.
Sew while guiding the fabric with your hands
so that the fabric is fed in a straight line.
25
Symptom, Cause/solution
Reference
The thread is tangled, for example, in the bobbin
case.
57
Symptom, Cause/solution
Reference
Troubleshooting
67
APPENDIX
4
Error messages
When erroneous operations are performed messages and advice on operation will be displayed on the LCD. Follow what is
displayed. If you press or do the operation correctly while the error message is displayed, the message disappears.
Error Messages Cause/Solution
1
This message is displayed when the sewing speed controller is set to control the
zigzag stitch width, and the “Start/Stop” button is pressed. Set (Width control)
to [OFF], or use the foot controller to operate the machine.
2
This message is displayed when (Twin needle) is set to [ON], and a stitch pattern
that cannot be sewn with the twin needle is selected.
3
This message is displayed when the “Start/Stop” button was pressed while the foot
controller was connected.
4
This message is displayed when the buttonhole lever is down, a stitch other than a
buttonhole is selected, and a button, such as the “Start/Stop” button, is pressed.
5
This message is displayed when the buttonhole lever is up, a buttonhole stitch is
selected, and a button, such as the “Start/Stop” button, is pressed.
6
This message is displayed when a button, such as the “Start/Stop” button, is
pressed while the presser foot was raised.
7
This message is displayed when you tried to combine more than 70 decorative
stitches.
8 This message is displayed when the stitch mode was changed.
Troubleshooting
68
Operation beeps
If a correct operation is performed, the machine beeps one time.
If an incorrect operation is performed, the machine beeps two or four times.
If the machine locks up, for example, because the thread is tangled, the machine continues to beep for seven seconds, and then
the machine automatically stops. Be sure to check for the cause of the error, and correct it before continuing to sew.
9 This message is displayed when you tried to delete a saved stitch pattern.
10
This message is displayed when a button, such as the Reverse/reinforcement stitch
button, was pressed while the bobbin winder shaft is moved to the right.
11
This message is displayed when a button, such as the “Start/Stop” button, was
pressed after a stitch has been deleted.
12
This message is displayed when the motor locks due to tangled thread or for other
reasons related to thread delivery.
13
F**
If error message “F**” appears in the LCD while the machine is being used, the
machine may be malfunctioning. (“*” will be replaced with a number.)
Contact your nearest Brother authorized service center.
Error Messages Cause/Solution
Index
69
APPENDIX
4
A
Appliqué ..................................................................................... 47
B
Ball point needle ......................................................................... 19
Bar tack stitch
.............................................................................. 51
Basting stitch
............................................................................... 35
Blind hem stitch
.......................................................................... 41
Bobbin
........................................................................................ 12
Bobbin case
................................................................................. 58
Bobbin installation
...................................................................... 14
Bobbin thread
.............................................................................. 12
Bobbin winding
........................................................................... 12
Bobbin winding thread guide
...................................................... 12
Button sewing
.............................................................................. 45
Buttonhole
................................................................................... 42
C
Character spacing ........................................................................ 11
Cleaning
...................................................................................... 57
Cylindrical pieces
........................................................................ 31
D
Darning ....................................................................................... 51
Decorative stitches
...................................................................... 38
Denim
................................................................................. 19, 32
E
Elastic tape .................................................................................. 50
Error messages
............................................................................. 67
Even seam allowance
.................................................................. 31
F
Fabric .................................................................................. 19, 32
Fagoting
...................................................................................... 52
Feed dog position switch
....................................................... 5, 49
Feed dogs
...................................................................................... 5
Foot controller
............................................................................. 26
Free motion quilting
.................................................................... 49
H
Heirloom stitching ....................................................................... 55
I
Included accessories ...................................................................... 7
J
Joining ......................................................................................... 53
L
language ...................................................................................... 12
LCD
....................................................................................... 6, 10
Leather
........................................................................................ 33
light
............................................................................................. 11
M
Maintenance ............................................................................... 57
Metallic thread
.................................................................... 13, 17
Mirroring
..................................................................................... 11
N
Needle ................................................................................. 19, 20
Needle plate
.......................................................................... 5, 61
Needle plate cover
................................................................. 5, 57
Needle position
................................................................... 10, 31
Needle threader
........................................................................... 17
O
Operation beep ............................................................................ 68
Optional accessories
...................................................................... 8
Overcasting stitches
..................................................................... 40
P
Patchwork .................................................................................... 47
Piecing
......................................................................................... 47
Power supply
................................................................................. 9
Presser foot
........................................................... 10, 21, 25, 35
Presser foot holder
......................................................................... 5
Pulling up bobbin thread
............................................................. 18
Q
Quilting ....................................................................................... 48
Quilting guide
.............................................................................. 49
R
Race ............................................................................................ 58
Reinforcement stitch
............................................................ 27, 35
Reverse stitch
....................................................................... 27, 35
S
Satin stitch ................................................................................... 11
Scallop stitching
........................................................................... 53
Sewing speed controller
................................................................. 6
Shell tuck stitch
............................................................................ 53
Size
.............................................................................................. 11
Smocking
..................................................................................... 53
Speed
................................................................................... 14, 25
Spool cap
..................................................................................... 13
Spool net
..................................................................................... 13
Stitch length
................................................................................. 29
Stitch types
.................................................................................. 23
Stitch width
.................................................................................. 29
Straight stitch
............................................................... 31, 35, 47
Stretch fabrics
.............................................................................. 32
T
Thick fabrics ................................................................................ 32
Thin fabrics
.................................................................................. 32
Thread
......................................................................................... 19
Thread cutting
...................................................................... 26, 28
Thread density
............................................................................. 11
Thread tension
..................................................................... 30, 60
Transparent nylon thread
.............................. 13, 14, 17, 19, 36
Troubleshooting
........................................................................... 59
Twin needle
................................................................................. 54
U
Upper thread ....................................................................... 16, 19
V
Vinyl fabrics ................................................................................. 33
Index
Index
70
W
Walking foot ................................................................................ 48
Wing needle
................................................................................ 55
Z
Zigzag stitch ........................................................................ 29, 50
Zipper
.......................................................................................... 46
English
888-M70
XH1967-001
Brother SupportCenter is a mobile app that provides the support
information (Instruction Videos, FAQs, etc.) for your Brother product.
Visit the App Store or Google Play™ to download.
To get information about Winding/Installing the Bobbin,
please go to http://s.brother/cvjaa/.
Please visit us at http://s.brother/cpjag/ where you can
get the support information (Instruction Videos, FAQs, etc.)
for your Brother product.
To get information about Upper threading, please go to
http://s.brother/cvjab/.
To get information about troubleshooting, please go to
http://s.brother/cfjag/.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother Innov-is A150 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother Innov-is A150 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Brother Innov-is A150

Brother Innov-is A150 Gebruiksaanwijzing - Nederlands - 76 pagina's

Brother Innov-is A150 Gebruiksaanwijzing - Deutsch - 76 pagina's

Brother Innov-is A150 Gebruiksaanwijzing - Français - 76 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info