613569
28
Verklein
Vergroot
Pagina terug
1/116
Pagina verder
GETTING READY
26
Threading the needle manually
(without using the needle
threader)
When using specialty thread, such as transparent
nylon thread or metallic thread, a wing needle or a
twin needle which cannot be used with the needle
threader, thread the needle as described below.
a
Thread the machine to the needle bar thread
guide.
For details, refer to “Threading the upper
thread” (page 20).
b
Lower the presser foot lever.
a Pressor foot lever
c
Pass the thread through the eye of the needle
from front to back.
d
Raise the presser foot lever, pass the end of
the thread through the presser foot, and then
pull out about 5 cm (2 inches) of thread
toward the rear of the machine.
Using the twin needle
With the twin needle, you can sew two parallel lines
of the same stitch with two different threads. Both
upper threads should have the same thickness and
quality. Be sure to use the twin needle and the extra
spool pin.
For details on the stitches that can be sewn with the
twin needle, refer to “Stitch Settings” (page 89).
a Twin needle
b Extra spool pin
a
Install the twin needle.
For details on installing a needle, refer to
“Replacing the needle” (page 31).
b
Thread the upper thread for the left needle.
For details, refer to steps
a through j of
“Threading the upper thread” (page 20).
c
Manually thread the left needle with the
upper thread.
Pass the thread through the eye of the needle
from the front to the back.
Do not touch the (start/stop button),
(needle position button) or (reverse/
reinforcement stitch button). If one of the
buttons is accidentally pressed, the machine
will begin sewing and your finger may be
pricked with the needle or the needle may
break.
a
CAUTION
ab
Only use the twin needle (part code: X59296-
121). Use of any other needle may bend the
needle or damage the machine.
Never use bent needles. Bent needles can
easily break, possibly resulting in injuries.
The needle threader cannot be used with the
twin needle. If the needle threader is used
with the twin needle, the sewing machine
may be damaged.
CAUTION
28

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Brother-Innov-is-27SE

Zoeken resetten

  • Is het mogelijk om de steek automatisch iets groter te zetten bij het opzetten van de machine ? Alvast bedankt Gesteld op 11-2-2022 om 16:56

    Reageer op deze vraag Misbruik melden
  • Bijgeleverd is er een kleine tube olie maar in de handleiding staat niet vermeld waar je de naaimachine kan oliên. Bij 'onderhoud ' staat er vermeld dat je het spoelhuis niet mag oliên. Gesteld op 4-9-2021 om 18:31

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother Innov-is 27SE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother Innov-is 27SE in de taal/talen: Engels als bijlage per email.

De handleiding is 4,03 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Brother Innov-is 27SE

Brother Innov-is 27SE Gebruiksaanwijzing - Nederlands - 108 pagina's

Brother Innov-is 27SE Gebruiksaanwijzing - Deutsch - 116 pagina's

Brother Innov-is 27SE Gebruiksaanwijzing - Français - 108 pagina's

Brother Innov-is 27SE Snelstart handleiding - Alle talen - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info