579704
72
Verklein
Vergroot
Pagina terug
1/200
Pagina verder
USER’S GUIDE
Brother Colour Printer
HL-3040CN
HL-3070CW
For visually-impaired users
You can read this manual with Screen
Reader ‘text-to-speech’ software.
You must set up the hardware and install the driver before you can use the printer.
Please use the Quick Setup Guide to set up the printer. You can find a printed copy in the box.
Please read this User’s Guide thoroughly before you use the printer. Keep the CD-ROM in a convenient place so you
can use it quickly if you need to.
Please visit us at http://solutions.brother.com/
where you can get product support, the latest driver updates and
utilities, and answers to frequently asked questions (FAQs) and technical questions.
Note: Not all models are available in all countries.
Version 0
UK
i
Using this guide
Symbols used in this guide
We use the following icons throughout this User’s Guide:
WARNING
WARNINGS tell you what to do to prevent possible personal injury.
CAUTION
CAUTIONS specify procedures you must follow or avoid to prevent possible
minor injuries.
IMPORTANT
IMPORTANT describes procedures you must follow or avoid to prevent
possible printer problems or printer damage, or damage to other objects.
Electrical Hazard icons alert you to a possible electrical shock.
Hot Surface icons warn you not to touch machine parts that are hot.
Note
Notes tell you how you should respond to a situation that may arise or give tips
about how the operation works with other features.
ii
Safety precautions
To use the printer safely
If you DO NOT follow these safety instructions, there is a possibility of a fire, electrical shock, burn or
suffocation. Please keep these instructions for later reference and read them before attempting any
maintenance.
WARNING
There are high voltage electrodes inside the printer. Before you clean the inside of the printer or replace
parts, make sure that you have turned off the power switch and unplugged the printer from the AC power
outlet.
DO NOT handle the plug with wet hands. Doing this might cause an electrical shock.
Always make sure the plug is fully inserted.
This product must be installed near an AC power outlet that is easily accessible. In case of an emergency,
you must disconnect the power cord from the AC power outlet to shut off the power completely.
Lightning and power surges can damage this product! We recommend that you use a quality surge
protection device on the AC power outlet, or unplug the cords during a lightning storm.
iii
Use the printer within the recommended power range.
The power cord, including extensions, should be no longer than 5 meters (16.5 feet).
Do not share the same power circuit with other high-powered appliances, such as an air conditioner, copier,
shredder and so on. If you cannot avoid using the printer with these appliances, we recommend that you
use a voltage transformer or a high-frequency noise filter.
Use a voltage regulator if the power source is not stable.
Avoid using this product during an electrical storm. There may be a remote risk of electric shock from
lightning.
Use only the power cord provided with the machine.
Plastic bags are used in the packaging. To avoid danger of suffocation, keep these bags away from babies
and children.
DO NOT use flammable substances, any type of spray or any organic solvent/liquids contains alcohol or
ammonia to clean the inside or outside of the machine. Doing this may cause a fire or electrical shock. Refer
to Cleaning on page 128 for how to clean the machine.
DO NOT use a vacuum cleaner to clean up scattered toner. Doing this might cause the toner dust to ignite
inside the vacuum cleaner, potentially starting a fire. Carefully clean the toner dust with a dry, lint-free cloth
and dispose of it according to local regulations.
Cleaning the outside of the printer:
Make sure that you have unplugged the printer from the AC power outlet.
Use neutral detergents. Cleaning with volatile liquids such as thinner or benzine will damage the outside
surface of the printer.
DO NOT use cleaning materials that contain ammonia.
Power source: USA and Canada: AC 110 to 120 V, 50/60 Hz
Europe and Australia: AC 220 to 240 V, 50/60 Hz
iv
This printer is heavy and weighs approximately 19.0 kg (41.9 lb). To prevent injuries when moving or lifting
this printer, make sure to use at least two people. Be careful not to pinch your fingers when you set the
printer back down.
CAUT ION
After you have just used the printer, some internal parts of the printer will be extremely hot. When you open
the top or back cover (back output tray) of the printer, DO NOT touch the shaded parts shown in the
illustration.
Put your printer on a flat, stable surface such as a desk that is free of vibration and shocks.
Only use the printer within the following ranges of temperature and humidity:
Temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F)
Humidity: 20% to 80% (without condensation)
Use the printer in a well-ventilated room.
Avoid placing your machine in a high-traffic area.
DO NOT put the printer where the ventilation hole of the printer is blocked. Keep a gap of roughly 100 mm
(4 in.) between the ventilation hole and the wall.
Inside the printer
(Top View)
Inside the printer
(Back View)
v
DO NOT place the machine near heaters, air conditioners, refrigerators, water, chemicals or devices that
contain magnets or generate magnetic fields.
DO NOT expose the machine to direct sunlight, excessive heat, open/naked flames, salty or corrosive
gasses, moisture, or dust.
DO NOT put the printer near devices that contain magnets or produce magnetic fields.
DO NOT connect your machine to an AC power outlet controlled by wall switches or automatic timers.
DO NOT connect your machine to an AC power outlet on the same circuit as large appliances or other
equipment that might disrupt the power supply.
DO NOT put the printer near heaters, air conditioners, chemicals or refrigerators.
DO NOT put objects on top of the machine.
IMPORTA NT
DO NOT remove or damage the caution labels located on or around the fuser.
Note
Keep a minimum gap around the printer as shown in the illustration.
510mm(20.1 in.)
100mm
(4 in.)
100mm
(4 in.)
120mm
(4.72 in.)
vi
Trademarks
Brother and the Brother logo are registered trademarks and BRAdmin Light and BRAdmin Professional are
trademarks of Brother Industries, Ltd.
Apple, Macintosh, Safari and TrueType are trademarks of Apple Inc., registered in the United States and
other countries.
Windows Vista is either a registered trademark or a trademark of Microsoft Corporation in the United States
and/or other countries.
Microsoft, Windows, Windows Server and Internet Explorer are registered trademarks of Microsoft
Corporation in the United States and/or other countries.
PostScript and PostScript3 are either registered trademarks or trademarks of Adobe Systems Incorporated
in the United States and/or other countries.
Intel, Intel Core and Pentium are trademarks of Intel Corporation in the U.S. and other countries.
AMD is a trademark of Advanced Micro Devices, Inc.
PictBridge is a trademark.
Linux is the registered trademark of Linus Torvalds in the U.S. and other countries.
Each company whose software title is mentioned in this manual has a Software License Agreement specific
to its proprietary programs.
All other trademarks are the property of their respective owners.
Compilation and Publication Notice
Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the
latest product’s descriptions and specifications.
The contents of this manual and the specifications of this product are subject to change without notice.
Brother reserves the right to make changes without notice in the specifications and materials contained
herein and shall not be responsible for any damages (including consequential) caused by reliance on the
materials presented, including but not limited to typographical and other errors relating to the publication.
© 2009 Brother Industries Ltd.
Shipment of the Printer
If for any reason you must ship your printer, carefully package the printer to avoid any damage during transit.
We recommend that you save and use the original packaging. The printer should also be adequately insured
with the carrier.
vii
Table of Contents
1 Printing Methods 1
About paper...............................................................................................................................................1
Type and size of paper........................................................................................................................1
Recommended paper..........................................................................................................................2
Unprintable area..................................................................................................................................3
Printing methods........................................................................................................................................5
Printing on plain paper.........................................................................................................................5
Printing on thick paper, labels and envelopes...................................................................................13
Duplex printing.........................................................................................................................................18
Guidelines for printing on both sides of the paper.............................................................................18
Manual duplex printing ......................................................................................................................19
Booklet printing (for Windows
®
printer driver)...................................................................................22
Printing photos from a digital camera (HL-3070CW only).......................................................................23
PictBridge requirements....................................................................................................................23
Setting your digital camera................................................................................................................23
Printing images..................................................................................................................................24
Connecting a camera as a storage device........................................................................................24
DPOF printing....................................................................................................................................25
Printing images with Secure Function Lock 2.0 enabled (HL-3070CW only)....................................25
Printing data from a USB flash memory drive with direct print
(HL-3070CW only)................................................................................................................................27
Supported file formats .......................................................................................................................27
Direct Print default settings................................................................................................................27
Creating a PRN or PostScript
®
3™ (HL-3070CW only) file for direct printing...................................28
Printing data directly from the USB flash memory drive....................................................................29
Printing data directly from the USB flash memory drive with Secure Function Lock 2.0 enabled
(HL-3070CW only).........................................................................................................................30
2 Driver and Software 32
Printer driver............................................................................................................................................32
Features in the printer driver (for Windows
®
)....................................................................................35
Using the custom monochrome printer driver (for Windows
®
)..........................................................47
Using the BR-Script3 printer driver
(PostScript
®
3™ language emulation for Windows
®
) (HL-3070CW only).....................................48
Features in the printer driver (for Macintosh)....................................................................................55
Using the BR-Script3 printer driver
(Post Script
®
3™ language emulation for Macintosh) (HL-3070CW only)...........................................65
Installing the BR-Script3 printer driver ..............................................................................................65
Uninstalling the printer driver...................................................................................................................70
Printer driver for Windows
®
, Windows Vista
®
and Windows Server
®
2003/2008.............................70
Printer driver for Macintosh...............................................................................................................71
Software ..................................................................................................................................................72
Software for networks .......................................................................................................................72
About emulation modes (HL-3070CW only)......................................................................................74
Automatic emulation selection (HL-3070CW only)............................................................................74
Automatic interface selection.............................................................................................................74
viii
3 Control Panel 75
Control panel...........................................................................................................................................75
Buttons ...................................................................................................................................................75
Go......................................................................................................................................................76
Cancel...............................................................................................................................................76
Secure Print.......................................................................................................................................76
+ or - button.......................................................................................................................................76
Back...................................................................................................................................................77
OK.....................................................................................................................................................77
LEDs........................................................................................................................................................77
LCD .........................................................................................................................................................77
Back light (HL-3070CW only)............................................................................................................78
LCD messages..................................................................................................................................78
Reprinting documents........................................................................................................................79
Printing Secure data..........................................................................................................................80
Using the control panel LCD menu....................................................................................................82
Menu table.........................................................................................................................................83
Default settings..................................................................................................................................94
Calibration .........................................................................................................................................96
Auto Registration...............................................................................................................................97
Manual Registration...........................................................................................................................98
4Option 99
SO-DIMM.................................................................................................................................................99
Installing extra memory ...................................................................................................................100
5 Routine Maintenance 102
Replacing the consumable items...........................................................................................................102
Toner cartridges ..............................................................................................................................104
Drum units.......................................................................................................................................112
Belt unit............................................................................................................................................118
Waste toner box ..............................................................................................................................122
Cleaning ................................................................................................................................................128
Cleaning the outside of the printer...................................................................................................128
Cleaning the LED head ...................................................................................................................130
Cleaning the corona wires...............................................................................................................131
Cleaning the drum unit ....................................................................................................................134
Cleaning the paper pick-up roller.....................................................................................................140
6 Troubleshooting 142
Identifying your problem........................................................................................................................142
LCD messages......................................................................................................................................143
Paper handling ......................................................................................................................................146
Paper jams and how to clear them........................................................................................................147
Jam Tray 1 (Paper jam inside the paper tray).................................................................................148
Jam Rear (Paper jam behind the back cover).................................................................................149
Jam Inside (Paper jam inside the printer)........................................................................................151
Improving the print quality......................................................................................................................154
Solving print problems...........................................................................................................................161
ix
Network problems..................................................................................................................................161
Other problems......................................................................................................................................162
For Macintosh with USB..................................................................................................................162
BR-Script 3 (HL-3070CW only) .......................................................................................................162
A Appendix 163
Printer specifications..............................................................................................................................163
Engine.............................................................................................................................................163
Controller.........................................................................................................................................164
Software..........................................................................................................................................165
Direct Print feature...........................................................................................................................165
Control panel...................................................................................................................................166
Paper handling ................................................................................................................................166
Media specifications........................................................................................................................166
Supplies...........................................................................................................................................167
Dimensions / weights.......................................................................................................................167
Other................................................................................................................................................168
Computer requirements...................................................................................................................169
Important information for choosing your paper................................................................................170
Symbol and character sets (HL-3070CW only).....................................................................................173
How to use Web Based Management (web browser).....................................................................173
Symbol and character sets list.........................................................................................................174
Quick reference for bar code control commands
(HL-3070CW only)..............................................................................................................................176
Print bar codes or expanded characters..........................................................................................176
Libtiff Copyright and License.................................................................................................................184
B Appendix (for Europe and Other Countries) 185
Brother numbers....................................................................................................................................185
C Appendix (for USA and Canada) 186
Brother numbers....................................................................................................................................186
DIndex 189
1
1
1
About paper 1
Type and size of paper 1
The printer loads paper from the installed paper tray or the manual feed slot.
The names for the paper trays in the printer driver and this guide are as follows:
When looking at this page on the CD-ROM, you can jump to the page for each printing method by clicking p
in the table.
Printing Methods 1
Paper tray Tray 1
Manual feed slot Manual
Media type Tray 1 Manual Choose the media type from
the printer driver
Plain paper
75 g/m
2
to 105 g/m
2
(20 to 28 lb)
pp
Plain Paper
Recycled paper ppRecycled Paper
Bond paper
Rough paper– 60 g/m
2
to
163 g/m
2
(16 to 43 lb)
p
60 g/m
2
to 163 g/m
2
(16 to 43 lb)
Bond Paper
Thin paper
60 g/m
2
to 75 g/m
2
(16 to 20 lb)
pp
Thin Paper
Thick paper
105 g/m
2
to 163 g/m
2
(28 to 43 lb)
p
Thick Paper or Thicker Paper
Labels p
A4 or Letter
Label
Envelopes
p
Envelopes
Env. Thin
Env. Thick
Tray 1 Manual
Paper size A4, Letter, Legal, B5 (ISO), Executive,
A5, A5 (Long Edge), A6, B6 (ISO), Folio
Width: 76.2 to 220 mm (3.0 to 8.66 in.)
Length: 116 to 406.4 mm (4.57 to 16 in.)
Number of sheets
(80 g/m
2
/ 20 lb)
250 sheets 1 sheet
Printing Methods
2
1
Recommended paper 1
Before you buy a lot of paper, test a small quantity to make sure that the paper is suitable.
Use paper that is made for plain-paper copying.
Use paper that is 75 to 90 g/m
2
(20 to 24 lb).
Use neutral paper. Do not use acidic or alkaline paper.
Use long-grain paper.
Use paper with a moisture content of approximately 5%.
This printer can use recycled paper that meets DIN 19309 specifications.
CAUT ION
DO NOT use ink jet paper because it may cause a paper jam or damage your printer.
If you use paper that is not recommended, a paper jam or misfeed may occur in the printer.
Note
Preprinted paper must use ink that can withstand the temperature of the printer's fusing process (200
degrees centigrade).
If you use bond paper, paper having a rough surface or paper that is wrinkled or creased, the paper may
exhibit degraded performance.
(To help you choose which paper to use with this printer, see Important information for choosing your paper
on page 170.)
Europe USA
Plain paper
Xerox Premier TCF 80 g/m
2
Xerox Business 80 g/m
2
Xerox 4200 20 lb
Hammermill Laser Print 24 lb (90g/m2)
Recycled paper
Xerox Recycled Supreme 80 g/m
2
(No specific brand recommended)
Labels Avery laser label L7163 Avery laser labels white #5160
Envelope Antalis River series (DL) (No specific brand recommended)
Printing Methods
3
1
Types of envelopes 1
Most envelopes will be suitable for your printer. However, some envelopes may have feed and print quality
problems due to the way they have been made. A suitable envelope should have edges with straight, well-
creased folds and the leading edge should not be thicker than two pieces of paper. The envelope should lie
flat and not be of baggy or flimsy construction. You should buy quality envelopes from a supplier who
understands that you will be using the envelopes in a laser printer. Before you print a lot of envelopes, test
one to make sure that the print results are what you want.
Brother does not recommend a particular envelope because envelope manufacturers may change the
envelope specifications. You are responsible for the quality and performance of the envelopes you use.
Do not use damaged, curled, wrinkled, irregularly shaped, extremely shiny or textured envelopes.
Do not use envelopes with clasps, snaps, tie strings, self-adhesive components, windows, holes, cutouts
or perforations.
Do not use envelopes that are of a baggy construction, not sharply creased, embossed (have raised
writing on them) or pre-printed on the inside.
Do not use envelopes that were previously printed by a laser / LED printer.
Do not use envelopes that cannot be arranged when put in a pile.
Do not use envelopes that are made of paper that weighs more than the paper weight specifications for
the printer.
Do not use envelopes that have been badly made, with edges that are not straight or consistently square.
If you use any of the types of envelopes listed above, they may damage your printer. This damage is not
covered under any Brother warranty or service agreement.
Note
Do not put different types of paper in the paper tray at the same time because it may cause paper jams or
misfeeds.
Do not print envelopes using duplex printing.
You must choose the same paper size from your application as the paper in the tray.
Unprintable area 1
The area of the paper that cannot be printed on is shown in the table below:
Note
The area that cannot be printed on may vary depending on the paper size and the printer driver you are
using. The unprintable area shown below is for A4 / Letter size paper.
Portrait Landscape
Printing Methods
4
1
Windows
®
Printer Driver and Macintosh printer driver
BRScript Printer Driver for Windows
®
and Macintosh (HL-3070CW only)
1 4.23 mm (0.16 in.)
2 4.23 mm (0.16 in.)
3 4.23 mm (0.16 in.)
4 4.23 mm (0.16 in.)
1
3
24
1
3
24
Printing Methods
5
1
Printing methods 1
Printing on plain paper 1
Printing on plain paper from the paper tray 1
(For the recommended paper to use, see About paper on page 1.)
a Pull the paper tray completely out of the printer.
b While pressing the green paper-guide release lever, slide the paper guides to fit the paper size. Make
sure that the guides are firmly in the slots.
Printing Methods
6
1
c Put paper in the tray, and make sure that the paper is below the maximum paper mark (bbb) (1). The
side to be printed on must be face down.
IMPORTA NT
Make sure the paper guides touch the sides of the paper so it will feed properly.
d Put the paper tray firmly back in the printer. Make sure that it is completely inserted into the printer.
e Lift up the support flap (1) to prevent paper from sliding off the face-down output tray, or remove each
page as soon as it comes out of the printer.
1
1
Printing Methods
7
1
f Choose the following from the printer driver:
Paper Size ............................(1)
Media Type ...........................(2)
Paper Source .......................(3)
and any other settings you may want to make. (See Driver and Software in Chapter 2.)
Windows
®
printer driver
BR-Script printer driver for Windows
®
(HL-3070CW only)
Note
To use the BR-Script printer driver for Windows
®
you must install the driver using the Custom Install from
the CD-ROM.
1
2
3
1
2
3
Printing Methods
8
1
Macintosh printer driver
g Send the print data to the printer.
2
1
3
Printing Methods
9
1
Printing on plain paper or bond paper from the Manual feed slot 1
(For the recommended paper to use, see About paper on page 1.)
Note
The printer automatically turns on the Manual Feed mode when you put paper in the manual feed slot.
a Lift up the support flap (1) to prevent paper from sliding off the face-down output tray, or remove each
page as soon as it comes out of the printer.
b Open the manual feed slot cover.
1
Printing Methods
10
1
c Using both hands, slide the manual feed slot paper guides to the width of the paper that you are going
to use.
d Using both hands, put one piece of paper in the manual feed slot until the front edge of the paper touches
the paper feed roller. Wait until the machine automatically feeds the paper. When you feel the machine
pull in the paper, let go.
Note
Put the paper into the manual feed slot with the side to be printed face up.
Make sure that the paper is straight and in the correct position on the manual feed slot. If it is not, the paper
may not be fed properly, resulting in a skewed printout or a paper jam.
Pull the paper out completely when you retry putting the paper into the manual feed slot.
Do not put more than one piece of paper in the manual feed slot at any one time, as it may cause a jam.
If you put paper or other print media in the manual feed slot before the printer is in the Ready state, an
error may occur and the printer will stop printing.
Printing Methods
11
1
e Choose the following from the printer driver:
Paper Size ............................(1)
Media Type ...........................(2)
Paper Source .......................(3)
and any other settings you may want to make. (See Driver and Software in Chapter 2.).
Windows
®
printer driver
BR-Script printer driver (HL-3070CW only)
Note
To use the BR-Script printer driver for Windows
®
you must install the driver using the Custom Install from
the CD-ROM.
1
2
3
1
2
3
Printing Methods
12
1
Macintosh printer driver
f Send the print data to the printer.
g After the LCD shows Manual Feed, put in the next sheet of paper as in step d and repeat for each
page you want to print.
Note
The LCD will show Manual Feed until a sheet of paper is put in the manual feed slot.
2
1
3
Printing Methods
13
1
Printing on thick paper, labels and envelopes 1
When the back output tray is pulled down, the printer has a straight paper path from the manual feed slot
through to the back of the printer. Use this paper feed and output method when you want to print on thick
paper, labels or envelopes. (For the recommended paper to use, see About paper on page 1 and Types of
envelopes on page3.)
a Open the back cover (back output tray).
b Open the manual feed slot cover.
c <For printing envelopes only>
Pull down the two grey levers, one on the left-hand side and one on the right-hand side, toward you as
shown in the illustration below.
Printing Methods
14
1
d Using both hands, slide the manual feed slot paper guides to the width of the paper that you are going
to use.
e Using both hands, put one piece of paper or one envelope in the manual feed slot until the front edge of
it touches the paper feed roller. When you feel the machine automatically pull it in, let go.
Note
Put the paper or envelope into the manual feed slot with the side to be printed face up.
Make sure that the paper or envelope is straight and in the proper position on the manual feed slot. If it is
not, the paper or the envelope may not be fed properly, resulting in a skewed printout or a paper jam.
Pull the paper or envelope out completely when you retry putting the paper into the manual feed slot.
Do not put more than one piece of paper or one envelope in the manual feed slot at any one time, as it
may cause a jam.
If you put paper or other print media in the manual feed slot before the printer is in the Ready state, an
error may occur and the printer will stop printing.
Printing Methods
15
1
f Choose the following from the printer driver:
Paper Size ............................(1)
Media Type ...........................(2)
Paper Source .......................(3)
and any other settings you may want to make. (See Driver and Software in Chapter 2.).
Windows
®
printer driver
BR-Script printer driver (HL-3070CW only)
1
2
3
1
2
3
Printing Methods
16
1
Note
To use the BR-Script printer driver for Windows
®
you must install the driver using the Custom Install
from the CD-ROM.
When you use Envelope #10, choose Com-10 for the Paper Size.
For other envelopes which are not listed in the printer driver, such as Envelope #9 or Envelope C6,
choose User Defined... (for Windows
®
printer driver), PostScript Custom Page Size (for BR-Script
printer driver for Windows
®
) or Custom Page Sizes (for Macintosh printer driver). For more information
on envelope sizes, see Paper size on page 172.
Macintosh printer driver
g Send the print data to the printer.
h After the LCD show Manual Feed, put in the next sheet of paper or envelope as shown in step e.
Repeat for each page that you want to print.
i <For printing envelopes only>
When you have finished printing, reset the two grey levers which are pulled down at step c back to the
original position.
Note
The LCD will show Manual Feed until a sheet of paper or an envelope is put in the manual feed slot.
Remove each sheet or envelope at once after printing. Stacking the sheets or envelopes may cause the
paper to jam or curl.
2
1
3
Printing Methods
17
1
Note
If envelopes get smudged during printing set the Media Type to Thick Paper or Thicker Paper to
increase the fixing temperature.
If the envelopes are creased after they are printed, see Improving the print quality on page 154.
(For Windows
®
users) If DL size double flap envelopes are creased after printing, choose DL Long Edge
in Paper Size, from the Basic tab. Put a new DL size double-flap envelope in the manual feed slot with
the longest edge of the envelope in first, then print again.
Envelope joints that are sealed by the manufacturer should be secure.
All sides of the envelope should be properly folded without wrinkles or creases.
Printing Methods
18
1
Duplex printing 1
The supplied printer drivers for Windows
®
2000 or greater and Mac OS X 10.3.9 or greater all enable duplex
printing. For more information about how to choose the settings, see the Help text in the printer driver.
Guidelines for printing on both sides of the paper 1
If the paper is thin, it may wrinkle.
If paper is curled, straighten it and then put it back in the paper tray or the manual feed slot.
If the paper is not feeding properly, it may be curled. Remove the paper and straighten it.
When you use the manual duplex function, it is possible that there may be paper jams or poor print quality.
(If there is a paper jam, see Paper jams and how to clear them on page 147. If you have a print quality
problem, see Improving the print quality on page 154.)
Note
The screens in this section are from Windows
®
XP. The screens on your computer may vary depending
on your operating system.
Make sure that the paper tray is completely inserted into the printer.
You should use plain paper, recycled paper or thin paper. Do not use bond paper.
Printing Methods
19
1
Manual duplex printing 1
The BR-Script printer driver (PostScript
®
3 emulation) does not support manual duplex printing.
If you are using the Macintosh Printer Driver, see Manual Duplex Printing on page 63.
Manual duplex printing from the paper tray 1
a In the printer driver choose the Basic tab, and choose the Manual Duplex printing mode from the
Manual Duplex / Booklet setting, and then from the Basic tab choose the Paper Source to be Tray1.
b Send the data to the printer, then click OK on the computer screen. The printer will automatically print
all the even-numbered pages on one side of the paper first.
c Remove the printed even-numbered pages from the output tray and then, in the same order
1
, put them
back in the paper tray with the side to be printed on (blank side) face down. Follow the instructions on
the computer screen.
1
When printing to the Back output tray put the paper back in the tray in the opposite order it came out.
Printing Methods
20
1
d The printer will now automatically print all the odd-numbered pages on the other side of the paper.
Note
When you put paper in the paper tray, first empty the tray. Next, put the printed pages in the tray, with the
printed side face up. (Do not add the printed pages to the top of a stack of unprinted paper.)
Manual duplex printing from the manual feed slot 1
Note
You should use plain paper and recycled paper. Do not use bond paper.
a In the printer driver choose the Basic tab, and choose the Manual Duplex printing mode from the
Manual Duplex / Booklet setting, and then from the Basic tab choose the Paper Source to be Manual.
b Open the manual feed slot cover.
c Using both hands, slide the manual feed slot paper guides to the width of the paper that you are going
to use.
Printing Methods
21
1
d Using both hands put the paper in the manual feed slot with the side that is going to be printed on first
facing up. Send the data to the printer, then follow the instructions on the computer screen. Repeat this
step until you have printed all the even-numbered pages.
e Remove the printed even-numbered pages from the output tray and then, in the same order
1
, put them
back into the manual feed slot. Put the paper with the side to be printed on (the blank side) face up.
Follow the instructions on the computer screen.
1
When printing to the Back output tray put the paper back in the tray in the opposite order it came out.
Printing Methods
22
1
Paper orientation for manual duplex printing 1
The printer prints the second page first.
If you print 10 pages on 5 sheets of paper, it will print page 2 and then page 1 on the first sheet of paper. It
will print page 4 and then page 3 on the second sheet of paper. It will print page 6 and then page 5 on the
third sheet of paper, and so on.
When doing manual duplex printing, the paper must be put in the paper tray in the following way:
For the paper tray:
Put the side to be printed on face down with the leading edge (top) of the paper at the front of the tray.
To print on the second side, put the paper face up, with the leading edge (top) of the paper at the front
of the tray.
If letterhead paper is used, put the paper in the tray with the heading face up at the front of the tray.
To print on the second side, put the heading face down at the front of the tray.
For the manual feed slot:
Put the side to be printed on face up with the leading edge (top) of the paper in first.
To print on the second side, put the paper face down, with the leading edge (top) of the paper in first.
If letterhead paper is used, put it in with the heading face down and in first.
To print on the second side, put the heading face up and in first.
Booklet printing (for Windows
®
printer driver) 1
a Put paper in the paper tray or manual feed slot.
b Open the Properties dialog box in the printer driver.
c From the General tab, choose the Printing Preferences button.
d From the Basic tab, choose Booklet from the Manual Duplex / Booklet setting. If you want to change
the booklet printing setting, click Duplex Settings.
e Click OK .
Printing Methods
23
1
Printing photos from a digital camera (HL-3070CW only) 1
Your Brother printer supports the PictBridge standard, allowing you to connect to and print photos directly
from any PictBridge compatible digital camera. Even if your camera is not in PictBridge mode or does not
support PictBridge, you can connect your camera as a normal storage device. This enables you to print
photos from your camera. Follow the steps for Printing data from a USB flash memory drive with direct print
(HL-3070CW only) on page 27.
PictBridge requirements 1
The machine and the digital camera must be connected using a suitable USB cable.
The image file must be taken with the digital camera you want to connect to the printer.
Setting your digital camera 1
Make sure your camera is in PictBridge mode. The following PictBridge settings may be available from the
LCD of your PictBridge compatible camera. Depending on your camera some of these setting may not be
available.
Copies
Qualities
Paper Size
Date Print
File Name Print
Layout (1 in 1 printing / Index printing only)
You can also set the following PictBridge settings by using the control panel.
1
The default settings are shown in Bold with an asterisk.
2
These menu selections are also set by your camera. Camera settings are prioritized as long as your camera is not set to use the Printer Settings
(Default settings).
Menu Submenu
Options
1
PictBridge
Paper Size
2
Letter/ A4* / B5 / A5 / B6 / A6 See
PictBridge(HL-3070
CW only) on page 92
Orientation <For Letter,A4,B5> Portrait*/Landscape
<For A5,B6,A6> Portrait/Landscape*
Date & Time
2
Off* /On
File Name
2
Off* / On
Print Quality
2
Normal* / Fine
Printing Methods
24
1
Printing images 1
a Make sure that your camera is turned off. Connect your camera to the USB direct interface (1) on the
front of the printer using a suitable USB cable.
b Turn on the camera. When the printer has recognized the camera, the LCD shows the following message
Camera Connected
c Set your camera to print an image. Set the number of copies if you are asked.
When the printer starts printing a photo, the LCD will show Printing.
IMPORTA NT
DO NOT remove the digital camera from the USB direct interface until the printer has finished printing.
Connecting a camera as a storage device 1
Even if your camera is not in PictBridge mode, or does not support PictBridge, you can connect your camera
as a normal storage device. This enables you to print photos from your camera. Follow the steps for Printing
data directly from the USB flash memory drive on page 29.
(If you would like to print photos in PictBridge mode, see Setting your digital camera on page 23.)
Note
The name of the storage mode and operation differs among digital cameras. Please refer to the
documentation supplied with your camera for detailed information, such as how to switch from PictBridge
mode to mass storage mode.
1
Printing Methods
25
1
DPOF printing 1
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon Inc., Eastman Kodak Company, Fuji Photo Film Co. Ltd.,
Panasonic Corporation and Sony Corporation) created this standard to make it easier to print images from a
digital camera.
If your digital camera supports DPOF printing, you will be able to choose on the digital camera display the
images and number of copies you want to print.
The following DPOF settings are available:
1 in 1 printing
Copies
Printing images with Secure Function Lock 2.0 enabled (HL-3070CW only) 1
For more information about Secure Function Lock 2.0, see Chapter 14 of the Network User’s Guide on the
CD-ROM we have supplied.
a Make sure that your camera is turned off. Connect your camera to the USB direct interface (1) on the
front of the printer using a suitable USB cable.
b Turn on the camera. The following message appears if Secure Function Lock is on. Press OK.
Function Lock
c Press + or - to choose ID. Press OK
ID Name 1
d Enter the password. Press OK
PIN : XXXX
1
Printing Methods
26
1
Note
If your ID has the restricted options, the following messages appear on the LCD.
e The following message appears if the password is correct.
Camera Connected
f Set your camera to print an image. Set the number of copies if you are asked.
When the printer starts printing a photo, the LCD will show Printing.
IMPORTA NT
DO NOT remove the digital camera from the USB direct interface until the printer has finished printing.
Message Meaning
Access Denied Printing pictures directly from a camera to the Brother machine is restricted.
Limit Exceeded The number of pages you are allowed to print is exceeded. The print job will be
canceled.
Mono Print Only Printing colour documents is restricted.
Not Available Printing pictures directly from a camera to the Brother machine is restricted.
Printing Methods
27
1
Printing data from a USB flash memory drive with direct print
(HL-3070CW only) 1
With the Direct Print feature, you do not need a computer to print data. You can print by just plugging your
USB flash memory drive into the printer´s USB direct interface.
There might be some USB flash memory drives that will not work with the printer.
Supported file formats 1
Direct print supports the following file formats:
PDF version1.7
1
JPEG
Exif+JPEG
PRN (created by HL-3040CN or HL-3070CW printer driver)
TIFF (scanned by all MFC or DCP Brother models)
PostScript
®
3™(created by the HL-3070CW BRScript3 printer driver)
XPS version 1.0
1
Data including a JBIG2 image file, JPEG2000 image file, or a transparency files is not supported.
Direct Print default settings 1
1
The default settings are shown in Bold with an asterisk.
Menu Sub menu
Options
1
Print Menu Output Color Auto*/Color/Mono See Print Menu
on page 85
Direct Print Paper Size Letter/Legal/A4*/Executive/JIS B5/B5/A5
/A5 L/JIS B6/B6/A6/A4Long/Folio
See Direct Print
(HL-3070CW only)
on page 91
Media Type Plain Paper*/Thick Paper/Thicker
Paper/Thin Paper/Recycled Paper/Bond
Paper
Multiple Page 1in1*/2in1/4in1/9in1/16in1/25in1/
1in2×2pages/1in3×3pages/1in4×4pages/
1in5×5pages
Orientation Portrait*/Landscape
Collate On*/Off
Print Quality Normal*/Fine
PDF Option Document*/Document&Stamps/Document&M
arkup
Index Print Simple*/Details
Printing Methods
28
1
Creating a PRN or PostScript
®
3™ (HL-3070CW only) file for direct printing 1
a From the menu bar of an application, click File, then Print.
b Choose HL-3070CW (1) and check the Print to file box (2). Click Print.
c Choose the folder you want to save the file to and enter the file name if you are prompted to. If you are
prompted for a file name only, you can also specify the folder you want to save the file in by entering the
directory name. For example:
C:\Temp\FileName.prn
If you have a USB flash memory drive connected to your computer, you can save the file directly to the
USB flash memory drive.
2
1
Printing Methods
29
1
Printing data directly from the USB flash memory drive 1
a Connect your USB flash memory drive to the USB Direct Interface (1) on the front of the printer. When
the printer has recognized the USB flash memory drive, the LCD shows the following message.
b Folder names and file names not in a folder will be shown on the LCD. Press + or - to choose the folder
name or file name and press OK.
c Files: Press + or - to choose a default printing option and Press OK to select it, make the necessary
changes to the printing options and press Go, then press + or - to enter the number of copies you want,
then press Go.
Folders: Press + or - to select the file you want to print and press OK. Press + or - to choose a default
printing option and press OK to select it, make the necessary changes to the printing options and press
Go, then press + or - to enter the number of copies you want, then press Go.
IMPORTA NT
DO NOT remove the USB flash memory from the USB direct interface until the printer has finished printing.
Checking device
h
1./XXXX.FOLDER1
Printing Default settings
Paper Size
i
Media Type
i
Multiple Page
i
Orientation
q q
Output Color
j
PDF Option
j
Print Quality
j
Collate
1
Printing Methods
30
1
Printing data directly from the USB flash memory drive with Secure Function
Lock 2.0 enabled (HL-3070CW only) 1
For more information about Secure Function Lock 2.0, see Chapter 14 of the Network User’s Guide on the
CD-ROM we have supplied.
a Connect your USB flash memory drive to the USB Direct Interface (1) on the front of the printer. When
the printer has recognized the USB flash memory drive, the LCD shows the following message.
b Press + or - to choose ID. Press OK
ID Name 1
c Enter the four-digit password. Press OK
PIN : XXXX
Note
If your ID has the restricted options, the following messages appear on the LCD.
d The file names appear if the password is correct.
1./XXXX.FOLDER1
e Folder names and file names not in a folder will be shown on the LCD. Press + or - to choose the folder
name or file name and press OK.
Function Lock
Message Meaning
Access Denied Printing pictures directly from the USB flash memory drive to the Brother machine is
restricted.
Limit Exceeded The number of pages you are allowed to print is exceeded. The print job will be
canceled.
No Permission Printing colour documents is restricted. The print job will be canceled.
Mono Print Only Printing colour documents is restricted.
Not Available Printing pictures directly from the USB flash memory drive to the Brother machine is
restricted.
1
Printing Methods
31
1
f Files: Press + or - to choose a default printing option and Press OK to select it, make the necessary
changes to the printing options and press Go, then press + or - to enter the number of copies you want,
then press Go.
Folders: Press + or - to select the file you want to print and press OK. Press + or - to choose a default
printing option and press OK to select it, make the necessary changes to the printing options and press
Go, then press + or - to enter the number of copies you want, then press Go.
IMPORTA NT
DO NOT remove the USB flash memory from the USB direct interface until the printer has finished printing.
Printing Default settings
Paper Size
i
Media Type
i
Multiple Page
i
Orientation
q q
Output Color
j
PDF Option
j
Print Quality
j
Collate
32
2
2
Printer driver 2
A printer driver is software that translates data from the format used by a computer to the format that a
particular printer needs. Typically, this format is page description language (PDL).
The printer drivers for the supported versions of Windows
®
and Macintosh are on the CD-ROM we have
supplied or on the Brother Solutions Center at http://solutions.brother.com/. Install the drivers by following the
Quick Setup Guide. The latest printer driver can be downloaded from the Brother Solutions Center at
http://solutions.brother.com/.
(If you want to uninstall the printer driver, see Uninstalling the printer driver on page 70.)
For Windows
®
2
Windows
®
printer driver (the most suitable printer driver for this product)
BR-Script printer driver (PostScript
®
3™ language emulation for HL-3070CW only)
1
1
Install the driver using the Custom Install from the CD-ROM.
For Macintosh 2
Macintosh printer driver (the most suitable printer driver for this product)
BR-Script printer driver (PostScript
®
3™ language emulation for HL-3070CW only)
1
1
To install the driver, see Installing the BR-Script3 printer driver on page 65.
For Linux
®12
2
LPR printer driver
CUPS printer driver
1
Download the printer driver for Linux from http://solutions.brother.com/ or a link on the CD-ROM we have supplied.
2
Depending on Linux distributions, the driver may not be available.
Note
For more information about Linux printer driver, visit us at http://solutions.brother.com/
.
The printer driver for Linux may be released after the initial release of this product.
Driver and Software 2
Driver and Software
33
2
1
For the information on supported Linux distribution and to download the printer driver, visit us at http://solutions.brother.com/.
You can also download the printer driver from a link on the supplied CD-ROM. If you download from a link on CD-ROM, click Install Other Drivers
or Utilities, then click For Linux users on the screen menu. Access to internet is required.
Windows
®
printer
driver
BR-Script printer
driver
(HL-3070CW only)
Macintosh Printer
Driver
LPR / CUPS
printer driver
1
Windows
®
2000 Professional
pp
Windows
®
XP Home Edition
pp
Windows
®
XP Professional
pp
Windows Vista
®
pp
Windows Server
®
2003
pp
Windows Server
®
2008
pp
Windows
®
XP Professional
x64 Edition
pp
Windows Server
®
2003 x64
Edition
pp
Mac OS X 10.3.9 or greater pp
Linux
1
p
Driver and Software
62
2
Improve Print Output
This feature allows you to improve a print quality problem.
Reduce Paper Curl
If you choose this setting, the paper curl may be reduced.
If you are printing only a few pages, you do not need to choose this setting. We recommend that you
change the printer driver setting in Media Type to a thin setting.
Note
This operation make the temperature of the printer’s fusing process lower.
Improve Toner Fixing
If you choose this setting, the toner fixing on paper may be improved. If this selection does not provide
enough improvement, select Thicker paper in Media type settings.
Note
This operation make the temperature of the printer’s fusing process upper.
Sleep Time
When the printer does not receive data for a certain period of time, it enters sleep mode. In sleep mode,
the printer acts as though it were turned off. When you choose Printer Default the timeout setting has
been set to a specific time set at the factory, this can be altered in the driver or at the printer. If you want
to change the sleep time, choose Manual and then enter the time in the text box on the driver.
While the printer is in sleep mode, the LCD shows Sleep, but the printer can still receive data. Receiving
a print file or document or pressing Go will automatically wake up the printer to start printing
72

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother HL-3040CN bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother HL-3040CN in de taal/talen: Engels als bijlage per email.

De handleiding is 12,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Brother HL-3040CN

Brother HL-3040CN Gebruiksaanwijzing - Nederlands - 201 pagina's

Brother HL-3040CN Gebruiksaanwijzing - Deutsch - 203 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info