657412
102
Verklein
Vergroot
Pagina terug
1/106
Pagina verder
HE-800B
11. TROUBLESHOOTING
93
11-22. Upper thread miss-winding
Items with a “*” in the “Page” column should only be handled by a qualified technician.
Cause Check Remedy Page
Installation height Adjust the upper thread trimmer installation height. 68*
Upper thread trimmer
gradual opening timing
Adjust the timing so that the upper thread trimmer
gradually start opening when the feed mechanism
moves about 1.5 - 2.5 mm.
69*
Upper thread trimmer
opening timing
Adjust so that the cam opens the stop plate properly.
69*
Upper thread trimmer
assembly movement
Polish blade of upper thread trimmer M and upper
thread guide with buffer.
Check for burrs on the top surface of upper thread
trimmer M.
Replace the parts.
*
Upper thread trimmer
Lateral position of upper
thread trimmer
Adjust the lateral position of the upper thread trimmer.
*
Upper thread tension
Decrease tension to such a degree that it does not
influence stitch quality.
26, 27
Stitch quality
Zigzag width in the zigzag
stitch portion
Use parameter number 08 to increase the zigzag width
to such a degree that it does not influence the seam
shape.
36
Work clamp Uneven material feeding
Increase work clamp pressure. (Press material so
that the material is properly stretched.)
When using knits or woven materials, replace the
parts with the -3 specification parts:
Length feed plate (for specification -3), work clamp
assembly (for knits), needle plate 1.2 (for
specification -3)
66*
*
Underlay Underlay is being sewn.
Use parameter number 47 to reduce the underlay
feed pitch to about 0.5.
Use parameter number 14 to reduce the underlay
sewing speed.
* If sewing knitted wear, problems may easily occur
with the insertion of the upper thread, so you may
need to process the end of the thread.
39
36
Bar tack
Straight bar tacking is
being carried out
When carrying out straight bar tacking, problems may
easily occur with the insertion of the upper thread, so
you will need to process the end of the thread.
11-23. Work clamp is not raised (1)
…… Pulse motor stepping sound cannot be heard
Items with a “*” in the “Page” column should only be handled by a qualified technician.
Cause Check Remedy Page
Work clamp lifting
height
Check the work clamp
lifting height setting
Change the settings of memory switch Nos. 001, 002,
003, 004.
56
Cord connection
Check if there are any problems with the connection
and contacts of work clamp motor connector P23 on
the main P.C. board.
10*
Work clamp motor
Work clamp motor drive
gear
Check if the drive gear screw is loose.
*
4020Q
Approx. 1 mm
102

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother HE-800B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother HE-800B in de taal/talen: Engels als bijlage per email.

De handleiding is 2,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info