451159
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
The machine must be fitted with an earthed/fused plug.
Turn the sheet over.
LS2346004
UK/IRE/SAF
Printed in China
a. When the LCD shows this
message, press OK.
a. The LCD shows this message:
Note
The control panel warning
LED will stay on until you have
installed the ink cartridges.
3
Install the ink cartridges
5
e. Unpack the ink cartridge.
Remove the protective yellow cap if it is still
attached.
Note
If you make a mistake and want to start again,
press Stop/Exit to go back to step a.
g. Lift each lock release lever and gently push it
until it clicks, and then close the ink cartridge
cover.
If all lines are clear and visible, press
(Yes) to nish the quality check.
If you can see missing short lines, press
(No) and answer the LCD questions.
Connect the power cord
Set the LCD contrast (if needed)
7
6
Check the print quality
c. Press (Yes) to conrm the
language setting.
c. Pull all the lock release levers down. d. Remove the yellow
protective part .
a. When the preparation process
has nished, the LCD shows
this message.
OK
Poor
Set the date and time
8
a. Press Menu.
b. Press ▲ or ▼ to choose
0.Initial Setup, and then press OK.
c. Press ▲ or ▼ to choose
2.LCD Contrast, and then press OK.
d. Press ▲ or ▼ to choose Dark or Light.
e. Press OK and then Stop/Exit.
a. Press Menu.
b. Press ▲ or ▼ to choose
0. Initial Setup, and then press OK.
c. Press ▲ or ▼ to choose
1. Date&Time, and then press OK.
4
Set the language
Important
DO NOT
connect the
USB cable yet.
b. Open the ink cartridge cover.
b. Check the quality of the four colour
blocks
on the sheet.
(black/yellow/cyan/magenta)
d. Press repeatedly to enter the
last two digits of the year, and then press OK.
(e.g. Enter 07 for 2007.)
e. Repeat for Month and Day, and Hour and Minute in
24-hour format.
f. Press Stop/Exit.
b. Press or to choose
your language and press
OK.
1
Quick Setup Guide
CD-ROM
User's Guide
Ink
Cartridges [x4]
Black (LC970BK)
Yellow (LC970Y)
Cyan (LC970C)
Magenta (LC970M)
Power Cord
Start Here
Unpack the machine and check the components
Note
The components of your box may differ.
Save all packing materials and the carton in case for any
reason you must ship your machine.
A USB cable is not included.
You need to purchase a USB 2.0 cable that is no longer
than 2 metres.
1 2
Illustrations in this Quick Setup Guide
are based on the DCP-135C.
a. Pull out the paper tray. b. Lift the output paper tray cover .
Load plain A4 paper
d. Fan the stack of paper well.
e. Gently put the paper into
the paper tray.
Check that the paper is at
in the tray.
f. Make sure that the paper
side guides and paper
length guide touch the
edges of the paper.
a. Remove the protective
tape and lm.
b. Remove the foam
bag containing the ink
cartridges from on top
of the paper tray.
Note
If you set the wrong
language, you can change
it again after setting the
date and time.
(For details see Changing
LCD language in
Appendix B of the User's
Guide.)
g. Close the output paper tray
cover and slowly push the
paper tray back into the
machine.
h. Pull out the paper support
until it clicks, and then unfold
the paper support ap
.
c. Make sure you have all components. c. Press and slide the
paper side guides
and paper length
guide to t the
paper size.
Quick Setup Guide
DCP-135C DCP-150C
DCP-153C DCP-157C
Important
Do not push the
paper in too far.
a. Connect the power cord.
Important
DO NOT connect the USB
cable yet.
Warning
If ink gets in your eyes, wash them out with water
at once, and if irritation occurs consult a doctor.
Warning
Note
The machine prepares the ink tube system.
This process will take approximately four minutes.
Press Colour start.
Important
11
f.
Install each ink cartridge in the direction of the arrow on the label.
Take care to match the colour of the lock release lever with the
cartridge colour .
1
2
Connect the USB cable
11
For
Windows
®
Before you install
9
Install MFL-Pro Suite
10
Connect the power cord
Before you install
9
Install MFL-Pro Suite
11
Install FaceFilter Studio (Optional)
14
Connect the USB cable
10
Install Presto! PageManager
12
Finish and restart
For
Mac OS
®
X
a. Insert the supplied CD-ROM into
your CD-ROM drive.
Choose your language. 
b. Click Install MFL-Pro Suite, and click Yes
if you accept the license agreements.
a. Lift the scanner cover until it locks
securely into the open position.
a. Connect the power
cord.
b. When the
On-Line
Registration
screen appears,
make your
selection and
follow the
on-screen
instructions.
a. Click Finish to restart your
computer.
c. Follow the on-screen instructions
until this screen appears:
c. Click OK.
a. Lift the scanner
cover until it locks
securely into the
open position.
c. Carefully guide the USB cable into the
cable channel and out the back of the
machine.
d. Connect the cable to your Macintosh
®
.
a. Insert the supplied CD-ROM into your
CD-ROM drive.
b. Double-click the Start Here OSX icon.
For Mac OS
®
X 10.3.x or greater users:
Go to step 12.
DO NOT connect the
machine to a USB port on a
keyboard or a non-powered
USB hub. Connect the
machine directly to your
Macintosh
®
.
Make sure that the cable
does not restrict the cover
from closing, or an error
may occur.
12
FaceFilter Studio is an easy-to-use borderless
photo printing application for Windows.
a. Open the main menu again by ejecting
and then reinserting the CD-ROM
or by double-clicking the start.exe
program from the root folder.
b. The CD-ROM main menu will appear.
Choose your language and then click
Install Other Driver or Utilities.
c. Click the
FaceFilter Studio
button to install.
Install FaceFilter Studio Help
15
a. Go to Start/All
Programs/
FaceFilter Studio
on your computer.
b. Click the button on
the upper right corner
of the screen, and
then click Check for
Updates to go to the
updates web site.
c. Click the
Download button
and choose a
folder to save the
le in.
d. Close FaceFilter
Studio, double-click
the downloaded le
program from the
folder you specied, and
then follow the on-screen
instructions to install.
Note
To view
FaceFilter Studio
Help, go to Start/
All Programs/
FaceFilter
Studio/FaceFilter
Studio Help on
your computer.
Important
Important
DO NOT connect the
machine to a USB
port on a keyboard
or a non-powered
USB hub. Connect the
machine directly to your
computer.
Make sure that the
cable does not restrict
the cover from closing,
or an error may occur.
d. Lift the scanner cover to release the
lock
. Gently push the scanner
cover support down
and close
the scanner
cover
.
a.
Make sure that your computer is ON and you are logged on with Administrator rights
.
b. Disconnect the machine.
Important
DO NOT connect the USB cable yet.
Close any applications.
Make sure there are no memory cards or USB Flash memory drive inserted.
The screen may differ depending on the operating system.
The supplied CD-ROM includes the ScanSoft™ PaperPort™ 11SE.
This software supports Windows® 2000 (SP4 or greater), XP (SP2 or greater),
XP Professional x64 Edition and Windows Vista™ only. Update to the latest
Windows® Service Pack before installing MFL-Pro Suite.
For Windows Vista™, when the User Account Control screen appears, click Allow.
Important
The computer must be
connected to the internet.
The machine must be ON and
connected to the computer.
d. For Mac OS
®
X 10.2.4
to 10.2.8 users:
Click Add and then
choose USB.
e. Choose your
model name, and
then click Add.
f. Quit Print Center.
When Presto!
®
PageManager
®
is installed,
OCR capability is added to Brother
ControlCenter2. With Presto PageManager,
you can easily scan, share and organize
photos and documents.
The installation will continue
automatically.
13
Make sure your machine is connected the
power and your Macintosh
®
is ON.
Important
DO NOT connect the USB cable yet.
Close any applications.
Make sure there are no media cards
in the media drive of the machine.
For Mac OS
®
X 10.2.0 to 10.2.3
users, upgrade to Mac OS
®
X 10.2.4
or greater. (For the latest information
for Mac OS
®
X, visit
http://solutions.brother.com)
b. Insert the USB cable into the USB
socket marked with a
symbol.
The USB socket is inside the
machine as
shown below.
a. Double click the Presto! PageManager icon
and follow the on-screen instructions.
Note
After restarting the computer,
the Installation Diagnostics runs
automatically. If the installation is
unsuccessful, the installation results
window appears. Follow the on-screen
instructions or read the on-line help
and FAQs in Start/All Programs
(Programs)/Brother/DCP-XXXX.
b. Insert the USB cable into the USB
socket marked with a
symbol. The USB
socket is
inside the
machine as
shown right.
c. Carefully guide the USB cable into the cable
channel and out the back of the machine.
Connect the cable to your computer.
Note
If the Brother screen does
not appear automatically, go
to My Computer/Computer,
double click the CD-ROM
icon, and then double click
Start.exe.
Note
It may take a few
minutes for installation
to complete. After the
installation, click Restart.
Important
DO NOT cancel
any of the screens.
It may take a
few minutes for
installation to
complete.
e. Lift the scanner cover to release the
lock
. Gently push the scanner
cover support down
and close the scanner
cover
.
The installation is
now complete.
Finish
The installation is
now complete.
Finish
1

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Brother-DCP-135C
  • Printer vraagt om problemen oplossen/ routineonderhoud. wat moet ik doen? Gesteld op 7-2-2025 om 09:48

    Reageer op deze vraag Misbruik melden
  • Printer moet routineonderhoud hebben!
    Hoe moet dit gebeuren ? Gesteld op 20-1-2025 om 15:11

    Reageer op deze vraag Misbruik melden
  • Mijn printer moet routineonderhoud hebben/reinigen
    Wat houdt dit in?

    Gesteld op 4-1-2024 om 17:50

    Reageer op deze vraag Misbruik melden
  • ik krijg de melding "Zie problemen oplossen/routineonderhoud in gebruikershandleiding. Reinig. onm 51". Zelfs na vervanging van alle cartridges en reinigen van de rol blijft de foutmelding

    Wat is de reden ?? Gesteld op 23-8-2022 om 16:22

    Reageer op deze vraag Misbruik melden
  • de brother 135C geeft na printopdracht een foutmelding !
    Hoe recet ik deze printer? Gesteld op 18-1-2021 om 17:42

    Reageer op deze vraag Misbruik melden
  • hoe verwijder je een update die langer dan 10 dagen geleden is geinstalleerd.
    Ook onze brother DCP-135 print sinds een update niet meer. staat dat hij offline is maar hij scant wel. Gesteld op 5-7-2020 om 12:55

    Reageer op deze vraag Misbruik melden
6
  • van de een op de andere dag print hij niet meer, maar de scan doet het wel nog. De DCP-135C. Er staat ook niks in de wachtrij. Gesteld op 29-6-2020 om 19:26

    Reageer op deze vraag Misbruik melden
  • van de een op de andere dag print hij niet meer de scan doet het wel nog. Gesteld op 29-6-2020 om 19:24

    Reageer op deze vraag Misbruik melden
  • na een upgrade van windows (edge ) kan ik niet meer printen ( met DCP135c ) wel nog scannen Gesteld op 15-6-2020 om 18:23

    Reageer op deze vraag Misbruik melden
  • Printer DCP-135C reageert niet op printopdracht op mijn PC (windows 10). Display blijft aangeven 100% Normaal 01. Scannen en kopiëren gaat wel goed. Aansluiting gecontroleerd en ook probleem zoeken geactiveerd. Heeft niets gevonden. Gesteld op 15-6-2020 om 12:32

    Reageer op deze vraag Misbruik melden

  • onwegoGereageerd op 14 juni 2020
    Heeft waarschijnlijk te maken met een recente update:

    Klik op deze LINK

    known issues in this update:

    After installing this update, certain printers might fail to print. The print spooler might throw an error or close unexpectedly when attempting to print, and no output will come from the affected printer.

    Microsoft is working on a resolution and will provide an update when more information is available. Geantwoord op 17-6-2020 om 14:46

    Waardeer dit antwoord Misbruik melden
  • Met deze update (/windows-10-update-kb4560960 ) te verwijderen werkt alles weer normaal Geantwoord op 17-6-2020 om 14:49

    Waardeer dit antwoord (9) Misbruik melden
  • net hetzelfde hier 25.06.2020 !!!!
    Werk al heel lang met Printer Brother DCP 135, werkte altijd prima voorheen ! Geantwoord op 25-6-2020 om 12:33

    Waardeer dit antwoord (3) Misbruik melden
  • hallo,
    ik zit ook met dit probleem ... ik heb een 4 tal weken geleden de microsoft edge geïnstalleerd.. wellicht zou dat het probleem zijn..
    kan iemand mij zeggen hoe ik dit zelf kan oplossen aub? ( duidelijke taal, want ken niet veel van die computertaal)

    mvg Geantwoord op 28-6-2020 om 13:16

    Waardeer dit antwoord (9) Misbruik melden
  • brother dcp 135c werkt niet op windows 10 graag een oplossing Geantwoord op 20-7-2020 om 14:19

    Waardeer dit antwoord (1) Misbruik melden
  • Printer drukt niks meer af. Op display komt rood uitroepteken. Reinigen onm. Zie routineonderhoud. Wat betekent dit ? Wat moet ik doen zodat ik opnieuw kan printen ? Gesteld op 11-2-2020 om 15:54

    Reageer op deze vraag Misbruik melden
  • hoe vervang ik het inkt absorptie kussen van mijn brother dcp-135c printer Gesteld op 9-1-2020 om 20:18

    Reageer op deze vraag Misbruik melden
12
18
  • hoe kan ik de resterende inhoud van de cartridges zien Gesteld op 28-12-2015 om 19:40

    Reageer op deze vraag Misbruik melden
    • Die vraag heb ik hiervoor ook gesteld, maar niemand schijnt hier antwoord op te geven.
      Je kunt zeker alleen vragen stellen hier Geantwoord op 28-12-2015 om 20:05

      Waardeer dit antwoord (1) Misbruik melden
  • Na installeren van windows 10 krijg ik geen statusmonitor meer te zien, dat wil zeggen. Hij geeft constant offline aan. Kan de inktlevels niet meer zien. Weet dus niet hoeveel inkt er nog in zit.Ook sinds kort alleen witte achtergrond bij opstarten controlcenter. Moet alles nu via de printer zelf doen.
    Bij Brother DCP-135C dus Gesteld op 15-12-2015 om 13:11

    Reageer op deze vraag Misbruik melden
  • Heb maar een andere printer gekocht. Je kunt hier schijnbaar alleen een vraag of probleem melden, maar geen hulp verwachten. Niemand komt met een antwoord. Al was t alleen maar dat ze zouden zeggen dat t probleem niet op te lossen is, dan weet je tenminste iets.
    Maargoed....succes iedereen verder ermee. Geantwoord op 15-6-2016 om 10:22

    Waardeer dit antwoord (1) Misbruik melden
  • Heb je een kabel nodig om de printer aan te sluiten op een laptop Gesteld op 25-10-2015 om 07:24

    Reageer op deze vraag Misbruik melden
    • Ja en die kabel is normaal bij de printer bijgeleverd , je moet de kabel aankoppelen aan de computer om te kunnen af printen . Ik hoop dat ge hiermee geholpen bent. GRT. Geantwoord op 25-10-2015 om 11:19

      Waardeer dit antwoord Misbruik melden
  • Kan printer niet terug aanzetten na afsluiten met sluiting knop. Gesteld op 11-5-2015 om 21:21

    Reageer op deze vraag Misbruik melden
  • Mijn printer geeft steeds de foutmelding: Onm 34 aan. Ik kan in de handleiding niet vinden hoe ik dit moet oplossen. Kan iemand mij helpen aub.? Gesteld op 13-4-2015 om 20:08

    Reageer op deze vraag Misbruik melden
  • Ik heb een printer brother dcp-135c. Hij geeft storings code: onm-5a , in de handleiding kan ik niet achterhalen hoe ik dit kan verhelpen
    Wie weet raad Gesteld op 11-4-2015 om 10:41

    Reageer op deze vraag Misbruik melden
    • Hallo, mijn printer (dezelfde) geef dezelfde foutmelding aan, heeft iemand je kunnen helpen, wat kan ik doen ?? met vriendelijke groeten Dominique Geantwoord op 29-4-2015 om 20:19

      Waardeer dit antwoord (6) Misbruik melden
24
30
36
42
48
54

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother DCP-135C bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother DCP-135C in de taal/talen: Engels als bijlage per email.

De handleiding is 2,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Brother DCP-135C

Brother DCP-135C Installatiehandleiding - Nederlands - 2 pagina's

Brother DCP-135C Gebruiksaanwijzing - Nederlands - 104 pagina's

Brother DCP-135C Installatiehandleiding - Deutsch - 2 pagina's

Brother DCP-135C Gebruiksaanwijzing - Deutsch - 99 pagina's

Brother DCP-135C Gebruiksaanwijzing - English - 99 pagina's

Brother DCP-135C Gebruiksaanwijzing - Français - 103 pagina's

Brother DCP-135C Installatiehandleiding - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info