718772
187
Verklein
Vergroot
Pagina terug
1/212
Pagina verder
TROUBLESHOOTING
185
Appendix
7
After Finishing an Operation
Upper threading is incorrect. 42
A bobbin designed specifically for this machine is
not being used.
36
There are needle holes or friction scratches in the
bobbin case.
176
Fabric does not feed through the machine.
Feed dogs are set in the down position.
Press , and then turn the handwheel to
raise the feed dogs.
80
Stitches are too close together. 62
Wrong presser foot. 194
Needle is turned, bent or the point is dull. 48
Thread is entangled.
180
Zigzag foot “J” is slanted on a thick seam at the
beginning of stitching.
69
The fabric feeds in the opposite direction.
The feed mechanism is damaged.
*
The needle contacts the needle plate.
The needle clamp screw is loose. 48
Needle is turned, bent or the point is dull. 48
Fabric being sewn with the machine cannot be
removed.
Thread is tangled below the needle plate. 179
A broken needle has fallen into the machine.
Turn off the machine, and then remove the
needle plate. If the needle that fell into the
machine can be seen, use tweezers to remove
it. After removing the needle, return the needle
plate to its original position.
Before turning on the machine, slowly turn the
handwheel toward you to check that it turns
smoothly. If the handwheel does not turn
smoothly or the needle that fell into the
machine cannot be removed, consult your
authorized Brother dealer.
180
The handwheel feels sluggish when it is turned.
Thread is tangled in the bobbin case. 179
Symptom, Cause/solution
Reference
Symptom, Cause/solution
Reference
Thread tension is incorrect.
Upper threading is incorrect. 42
Bobbin is set incorrectly. 40
Using improper needle or thread for the selected
fabric.
49
Presser foot holder is not attached correctly. 50
Thread tension is set incorrectly. 62, 143
Bobbin thread is incorrectly wound. 36
Needle is turned, bent or the point is dull. 48
A bobbin designed specifically for this machine is
not being used.
36
Character or decorative stitch patterns are misaligned.
Stitch pattern adjustment settings were set
incorrectly.
97
Stitch pattern does not turn out.
Wrong presser foot. 194
Did not use a stabilizer material on thin fabrics or
stretch fabrics.
70
Thread tension is set incorrectly. 62, 143
Fabric was pulled, pushed or fed at an angle while
it was being sewn.
Sew while guiding the fabric with your hands so
that the fabric is fed in a straight line.
56
The thread is tangled, for example, in the bobbin
case.
179
187

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother Brother Innov-is XJ1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother Brother Innov-is XJ1 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Brother Brother Innov-is XJ1

Brother Brother Innov-is XJ1 Gebruiksaanwijzing - Nederlands - 212 pagina's

Brother Brother Innov-is XJ1 Gebruiksaanwijzing - Deutsch - 212 pagina's

Brother Brother Innov-is XJ1 Gebruiksaanwijzing - Français - 212 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info