718772
83
Verklein
Vergroot
Pagina terug
1/212
Pagina verder
UTILITY STITCHES
Various Stitches
81
3
g
Use both hands to stretch the fabric taut, and then
move the fabric at a consistent pace in order to sew
uniform stitches roughly 2.0-2.5 mm (approx. 1/16 - 3/
32 inch) in length.
h
Press to cancel the free motion sewing mode.
Rotate the handwheel toward you
(counterclockwise) to raise the feed dogs.
i
After sewing, make sure to remove the straight stitch
needle plate and presser foot “C”, and reinstall the
regular needle plate and the needle plate cover.
Using free motion open toe quilting foot “O”
The free motion open toe quilting foot “O” is used for free
motion quilting with zigzag or decorative stitches or for
free motion quilting of straight lines on fabric with an
uneven thickness. Various stitches can be sewn using free
motion open toe quilting foot “O”. For details on the
stitches that can be used, refer to “STITCH SETTING
CHART” on page 194.
Free motion open toe quilting foot “O”
a
Press to set the machine to free motion sewing
mode.
The key appears as , the quilting foot is raised to
the necessary height, and then the feed dogs are
lowered for free motion sewing.
b
Select a stitch.
c
Remove the presser foot holder (page 50).
d
Attach free motion open toe quilting foot “O” by
positioning the pin of the quilting foot above the
needle clamp screw and aligning the lower-left of the
quilting foot and the presser bar.
e
Hold the quilting foot in place with your right hand,
and tighten the presser foot holder screw using the
disc-shaped screwdriver with your left hand.
CAUTION
Be sure to securely tighten the screws with the
disc-shaped screwdriver. Otherwise, the
needle may touch the quilting foot, causing it
to bend or break.
1 Stitch
Free motion open toe quilting foot “O” can also be
used with the straight stitch needle plate. We
recommend using free motion open toe quilting
foot “O” with free motion sewing of fabrics of
uneven thicknesses.
1 Pin
2 Needle clamp screw
3 Presser bar
Make sure that the quilting foot is not slanted.
1 Presser foot holder
screw
CAUTION
Be sure to securely tighten the screws with the
disc-shaped screwdriver. Otherwise, the
needle may touch the quilting foot, causing it
to bend or break.
O
O
83

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brother Brother Innov-is XJ1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brother Brother Innov-is XJ1 in de taal/talen: Engels als bijlage per email.

De handleiding is 12,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Brother Brother Innov-is XJ1

Brother Brother Innov-is XJ1 Gebruiksaanwijzing - Nederlands - 212 pagina's

Brother Brother Innov-is XJ1 Gebruiksaanwijzing - Deutsch - 212 pagina's

Brother Brother Innov-is XJ1 Gebruiksaanwijzing - Français - 212 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info