6
syncing blueTooTh To your TableT
1. Power on your Tablet.
2. To turn on the Keyboard, press and hold the Power Button. Both the Bluetooth
LED and the power LED will light up for a few seconds, and then the Bluetooth
LED will begin to flash.
3. Select the Settings icon on your Tablet’s screen and then “Bluetooth” in its menu.
4. Under Bluetooth “Devices”, select “Bluetooth Wireless Keyboard”.
5. Your Tablet will now prompt you to enter a 4-digit password, followed by the
Enter/Return key, on the Bluetooth Keyboard Case’s keyboard.
6. Your Tablet screen should now show the Bluetooth Keyboard has
connected successfully.
7. The Power LED will remain illuminated while the Keyboard is powered on.
8. To turn off the Keyboard, press and hold the Power Button. The Power LED will
turn off.
9. If your Tablet goes into standby mode, the Keyboard should still be synced. If you
power-off your Tablet you may need to re-sync. If you use the Keyboard with a
new Tablet, or it doesn’t connect properly, follow the steps above to re-sync.
Note: The Keyboard will automatically go into standby mode after 15 minutes
of non-use in order to preserve battery life. Just press any key to reactivate
the Keyboard.
839115_INS_Bluetooth Keyboard Case for iPad mini Tablets
5"Wx4.75”H_Output:100%_Prints:1/1,Blk
