772959

Britax-Romer KIDFIX Z-LINE Handleiding

2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
6. Place the XP-PAD 10 in the side of the child safety
seat closer to the vehicle door.
8. Place the child safety seat in driving direction on
a vehicle seat approved for use.Ensure that the
backrest 13 is flush with the backrest of the vehicle
seat .
9. Position the two ISOFIT locking arms 05 directly in
front of the two insertion aids 02.
10. Push both ISOFIT locking arms 05 into the insert
guides 02 until the ISOFIT locking arms 05 engage
on both sides with a clicking sound.
DANGER! The green safety button 07 must be
visible on both sides so that the child
safety seat is correctly fastened.
11. Hold the ISOFIT settings button 08 down and push
the child safety seat as far back as possible.
1. Carry out the steps in Section 8 "ADJUSTING THE
HEADREST".
2. Place the XP-PAD 10 on the side of the child safety
seat closer to the vehicle door.
3. Guide the elastic holding strap of the XP-PAD 10
into the dark red belt holder 03 of the headrest 21
until it lies completely in the belt holder 03 and is
not twisted.
4. Place the child seat on the vehicle seat. Ensure that
the backrest 13 is flush with the backrest of the
vehicle seat.
Tip! If the head restraint of the vehicle seat prevents
the child seat from being fastened in place properly, it
should be removed (see vehicle operating manual). After
removing the head restraint, secure it in a suitable place
in the vehicle so that it cannot be thrown around.
5. Carry out the steps in Section 10 "SECURING
YOUR CHILD".
12. Shake the child safety seat to ensure that it is
securely fastened and check again the fastening
buttons 07 to ensure that both are fully green.
13. Carry out the steps in Section 10 "SECURING
YOUR CHILD".
For the safety of your child, before every journey in the car check that...
Źthe child safety seat is slotted in on both sides with the ISOFIT locking arms
05 in the ISOFIT fastening points 01 and both safety buttons 07 are fully
green;
Źthe child safety seat is securely fastened;
Źthe lap belt 15 runs in the bright red belt guides on both sides of the seat
cushion 04 ,
Źthe
lap belt
15
runs through the bright red
SecureGuard 09.
Źthe diagonal seat belt section 16 on the side of the vehicle seatbelt buckle
17 also runs through the light red belt guide 04 of the seat cushion,
Źthe diagonal seat belt section 16 runs through the dark red belt holder 03 of
the headrest,
Źthe XP-PAD 10 is installed and used correctly,,
Źthe diagonal seat belt section 16 runs diagonally backward,
Źthe straps are tight and not twisted,
Źthe seatbelt buckle 17 must not be positioned on the red belt guide 04 in
the seat cushion.
DANGER!
If your child try to use to open the vehicle belt buckle 17 or
introduce the diagonal belt section 16 into the bright red SecureGuard 09,
stop as soon as possible. Check whether the child safety seat is correctly
fastened and ensure that your child is correctly secured. Explain to your
child the dangers associated with his actions.
7. SAFETY NOTES
Please take the time to read these instructions carefully and keep them
to hand in the intended storage compartment 12 on the child safety seat
at all times! The instructions must be with the child safety seat if the latter
is passed on to a third party.
DANGER! For the protection of your child:
• In the event of an accident with a collision speed of more than 10 km/h, the
child safety seat may be damaged without the damage becoming immediately
visible. In this case the child safety seat must be replaced. Please dispose of
it properly.
• As a rule, have your child safety seat checked if it was damaged (e.g if it falls
on the ground).
• Regularly check all important parts for damage. Ensure that all mechanical
parts, in particular, are fully functional.
• Never lubricate or oil parts of the child seat.
•
Never leave your child unattended in the child seat in the vehicle.
• Only allow your child to enter and exit the vehicle on the pavement side.
• Protect the child safety seat from intensive direct sunlight when it is not in use.
The child safety seat can get very hot in direct sunshine. Child skin is sensitive
and could thereby be harmed.
•
The more snugly the belt fits over your child's body, the better they will be
protected. Therefore avoid putting thick clothes on your child under the belt.
• Take regular breaks on long journeys in order to give your child the
opportunity to play around.
• Use on the rear seat: Move the front seat forward far enough that you child's
feet cannot hit the backrest of the front seat (to prevent risk of injury).
DANGER! For the protection of all vehicle occupants:
In the case of an emergency stop or an accident, unsecured persons or objects
may cause injury to other vehicle occupants. Please always check that...
• the backrests of the vehicle seats are locked (i.e. that any foldable rear seat
bench latch is engaged).
• all heavy or sharp-edged objects in the vehicle (e.g. on the parcel shelf) are
secured.
• all persons in the vehicle have their seatbelts fastened.
• the child safety seat is always secured when it is in the vehicle, even if no child
is being transported.
WARNING! For your protection when handling the child seat:
• Never use the child safety seat free-standing, not even for test sitting.
• The backrest 13 may tip backward. Always place the child seat on the vehicle
seat before having your child sit down in it.
• When swivelling up the backrest 13, nothing must come between the
backrest 13 and the seat cushion14 . You or your child could pinch your
fingers, injuring them.
•
To avoid damage, ensure that the child safety seat is not jammed in between
hard objects (car door, seat rails, etc.).
•
Keep the child safety seat in a safe place when it is not in use. Do not place any
heavy objects on the seat and do not store it directly next to sources of heat or
in direct sunlight.
CAUTION! To protect your vehicle:
•
Certain car seat covers made from more sensitive materials (e.g. velour, leather,
etc.) may sustain signs of wear and tear when using child safety seats. For
optimum protection of your car seat covers, we recommend using the BRITAX
RÖMER car seat protector from our range of accessories.
PAGE II
For the safety of your child, before every journey in the car check that...
Źthe child safety seat is securely fastened;
Źthe lap belt
15
runs in the bright red belt guides on both sides of the seat
cushion
04
,
Źthe
lap belt
15
runs through the bright red
SecureGuard 09.
Źthe diagonal seat belt section 16 on the side of the vehicle seatbelt buckle
17 also runs through the light red belt guide 04 of the seat cushion,
Źthe diagonal seat belt section 16 runs through the dark red belt holder 03
of the headrest,
Źthe diagonal seat belt section 16 runs diagonally backward,
Źthe straps are tight and not twisted,
Źthe XP-PAD 10 is installed and used correctly,,
Źthe seatbelt buckle 17 must not be positioned on the red belt guide 04 in
the seat cushion.
DANGER! If your child try to use to open the vehicle belt buckle 17 or
introduce the diagonal belt section 16 into the bright red SecureGuard 09,
stop as soon as possible. Check whether the child safety seat is correctly
fastened and ensure that your child is correctly secured. Explain to your
child the dangers associated with his actions.
A correctly set headrest 21 ensures that the diagonal seat belt section 16 is
optimally positioned, and gives your child optimum protection.
The headrest 21 must be adjusted so that there is a space two fingers wide
between the headrest 21 and your child's shoulders.
To adjust the height of the headrest to fit your child:
1. Reach into the adjustment handle 11 on the back
of the headrest 21 and pull it towards you.
This unlocks the headrest.
2. You can now move the unlocked headrest 21 to
the desired height. As soon as you release the
adjustment handle 11 , the headrest 21 will lock
into place.
3. Place the child safety seat on the vehicle seat.
4. Have your child sit down in the child safety seat and
check the height. Repeat the procedure until the
headrest 21 has the correct height.
01
02
1. If your vehicle is not fitted with ISOFIX insertion aids by standard, clamp
the two insertion aids 02 , with are included in the scope of delivery of the
seat*, with the section pointing upwards to the two ISOFIX fastening points
01 of your vehicle.
TIP!
The ISOFIX fastening points are located between the surface and the backrest
of the vehicle seat.
* The insertion aids facilitate the installation of the child safety seat with the
use of the SOFIX fastening points and prevent damage to the car seat covers.
As long as they are not used, remove them and keep them in a safe place. For
vehicles with foldable a backrest, the insertion aids need to be removed before
folding the backrest. Any problems occurring usually come from soiling or ex-
ternal objects on the insertion aids and on the hook. Remove soiling or external
objects to rectify such problems.
2. Moving the headrest of the vehicle seat into the top position.
3. Carry out the steps in Section 8 "ADJUSTING THE HEADREST".
8. ADJUSTING THE HEADREST
9. INSTALLATION
With ISOFIT + 3-point belt
A
The
KIDFIX Z-LINE
is installed permanently in the vehicle with the ISOFIT locking
arms.
Your child is then buckled into the child seat with the vehicle's 3-point seatbelt.
4. Hold the ISOFIT settings button 08 down and push
the ISOFIT locking arms 05 out in full .
1. Let your child sit in the child safety seat and place
the XP-PAD 10 over the chest area of your child.
If you find that the retraction force of the 3-point
seat belt is not enough to ensure that the seat belt
is tight (against the child), the child seat can be used
without XP-PAD 10; see Chapter 3 “APPROVAL”
[PAGE I].
2. Pull out the vehicle belt and guide it in front of your
child to the vehicle seat buckle 17.
DANGER! Ensure the vehicle belt is not twisted, as
otherwise the full protective eect of the
retaining system is not ensured.
3. Engage the buckle tongue in the vehicle seat buckle
17 with a CLICK!
4. Place the diagonal seat belt section 16 and lap
belt section 15 on the side of the vehicle seatbelt
buckle 17 into the light red belt guide 04of the seat
cushion.
DANGER! The vehicle seatbelt buckle must not be
positioned between the light red belt-
guide and the armrest.17 04
5. Also place the lap belt section 15 on the other side
of the seat cushion in the light red belt guide 04.
DANGER! The lap belt section 15 must lie as low
as possible over your child's hips on both
sides.
8. Ensure that the diagonal belt 16 runs over the collar-
bone of your child and is not on the neck and that
the key on the belt holder is 02 fully closed.
Tip! You can still adjust the height of the headrest 21
again here in the vehicle.
9. Open the Velcro fastener on the XP-PAD 10 and fold
the top part of the XP-PAD 10 to the side.
10. Insert the diagonal belt 16 in the die nubby surface
of the XP-PAD 10.
11. Close the XP-PAD 10 again by folding the folded
part back and closing the Velcro fastener.
DANGER! The diagonal seat belt section 16 must
run diagonally backward. You can adjust
the course of the belt with your vehicle's
adjustable belt deflector.
DANGER! The diagonal belt 16 must never be
directed forwards to the belt deflector
on the vehicle. In this case, use the child
safety seat on the back seat only.
12. Tighten the vehicle seat belt by pulling on the diagonal
seat belt section
16
.
13. Observe the further steps of the relevant installation
type.
5. Push the green safety button
07
and the red release
button
06
on both sides of the seat towards each
other. This ensures that both hooks on the ISOFIT
locking arms
05
are open and ready to use.
10. SECURING YOUR CHILD
UNFASTENING YOUR CHILD AND REMOVAL:
To unfasten your child or to remove the child safety seat, observe the steps in
Section 6 "REMOVAL AND DISPOSAL" [PAGE I]
The
KIDFIX Z-LINE
is not installed permanently in the vehicle. It is simply se-
cured together with your child using the vehicle's 3-point seatbelt.
With 3-point belt
B
7. Guide the elastic holding strap of the XP-PAD 10
into the dark red belt holder 03 of the headrest 21
until it lies completely in the belt holder 03 and is not
twisted.
UNFASTENING YOUR CHILD AND REMOVAL:
To unfasten your child or to remove the child safety seat, observe the steps
in Section 6 "REMOVAL AND DISPOSAL" [PAGE I]
Adjusting the backrest:
The backrest 13 is connected to the seat cushion 14 by
an articulated axis. The backrest 13 of the child seat can
be adjusted to any inclination of the vehicle seat.
Please know that optimal protection is guaranteed only if
the vehicle seat is in an upright position.
6. Guide the lap belt section 15 into the bright red
SecureGuard 09.
DANGER!
Do not guide the diagonal the section
16
into the bright red SecureGuard
09
.
7. Guide the diagonal seat belt section 16 into the
dark red belt holder 02 of the headrest 21 until
it lies completely in the belt holder 02 and is not
twisted.
Tip! If the backrest
13
conceals the belt holder
02
,
you can adjust the headrest
21
upwards. The diagonal
seat belt section
16
can now be easily inserted. Now
return the headrest
21
to the proper height.
0706
10
03
08
05
0502
07
08
10
13
2111
21
14
13
10
03
10
13
10
17
16
15 04
17
15
04
16
16
10
16
16
03
16
03
21
16 09 15
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Britax-Romer KIDFIX Z-LINE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Britax-Romer KIDFIX Z-LINE in de taal/talen: Engels als bijlage per email.

De handleiding is 0.43 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Britax-Romer KIDFIX Z-LINE

Britax-Romer KIDFIX Z-LINE Gebruiksaanwijzing - Nederlands - 2 pagina's

Britax-Romer KIDFIX Z-LINE Gebruiksaanwijzing - Deutsch - 2 pagina's

Britax-Romer KIDFIX Z-LINE Gebruiksaanwijzing - Français - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info