497154
10
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
10
Before rst use
Do not immerse the bread maker or power cord and plug in water or any other
liquid.
Before using your breadmaker for the rst time, wash the inside of the bread pan and the
kneading paddle with hot, soapy water. Rinse and dry thoroughly.
Using a damp cloth or sponge, wipe the interior of the breadmaker, the inside of the lid
and the exterior of the breadmaker. Use only a mild detergent solution.
Wash the measuring spoon and measuring cup with hot, soapy water, then rinse and dry
them thoroughly.
Using
Never exceed the maximum capacity of your bread maker (2.0lb). Place your
bread maker away from direct sunlight, draughts, or heating appliances and
radiators. These can adversely affect the operation of your bread maker and spoil
the results.
1. Lift the bread pan out of the bread maker using its handle.
2. Fit the kneading/mixing paddle onto the shaft in the bottom of the bread pan. The
shaft has a attened side to grip the paddle when it is rotating. Align the paddle with
the at on the shaft and press it down.
3. Pour the liquid ingredients into the bread pan. Add the rest of the ingredients to the
bread pan in the order listed in the recipe. Weigh all of your ingredients accurately
because incorrect measures will produce poor results.
Do not let the yeast come into contact with the salt or water prior to mixing, as this
will prevent the dough from rising properly (the water will activate the yeast before
the ingredients are properly mixed and kneaded). When using the delay timer, make
a small well in the mound of our and put the dry yeast into it.
4. Fit the bread pan into the oven chamber and push down to lock it into position. Lower
the bread pan handle and close the bread maker lid.
5. Plug your bread maker in to the mains supply socket. Your bread maker will beep
and select the default program (program 1).
6. Press the Menu button until the required program is selected. If the program permits,
select the loaf size and crust colour using the Loaf and Colour buttons.
7. Press the On/Off button. Your bread maker will start to run the selected program. To
stop or cancel the program press the On/Off button for approximately 2 seconds.
8. At the end of the baking cycle your bread maker will beep. Unplug your breadmaker
and, using oven gloves, lift the bread pan out of your bread maker.
9. Turn the bread out onto a wire rack and leave it to cool for at least 30 minutes.
10. Clean the bread pan and kneading/mixing paddle immediately after use—see
cleaning.
using your bread maker
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Breville VBM 003 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Breville VBM 003 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info