730024
30
Verklein
Vergroot
Pagina terug
1/72
Pagina verder
EN
INSTRUCTION MANUAL
...............2
IT
ISTRUZIONI PER L’USO
.............. 16
DE
BEDIENUNGSANLEITUNG
.......... 30
FR
MODE D‘EMPLOI
....................... 44
ES
MANUAL DE INSTRUCCIONES
.... 58
Art.No.: RPW3008
RADIO-CONTROLLED* ALARM CLOCK
SVEGLIA RADIOCONTROLLATA*
FUNKWECKER*
RÉVEIL RADIO-COMMANDÉ*
DESPERTADOR RADIO-CONTROLADO*
*Radio-controlled clock function not available in every territory / Funzione di orologio radiocontrollati non disponibile in ogni territorio / Funkuhrfunktion nicht in jederm Gebiet verfügbar / La fonction
d‘horloge radio-piloté n‘est pas disponible dans tous les territoires / La función de reloj radiocontrolado no está disponible en todos los territorios
4
PRODUCT OVERVIEW
1. Press [ ] to activate backlight
and projection for 5 seconds or to activate the
snooze function to delay the alarm by 8 min-
utes. Press and hold to set projection on or off
(only with AC/DC Adapter).
2. Projection lens.
3. Press [
] to switch between current time,
date or alarm 1/2 displays for 5 seconds. Press
and hold to enter setting mode.
4. Press [
] to toggle alarms on/off. Press and
hold to enter alarm setting mode.
5. Press [
] to initiate RCC* receiving. Press
and hold to set RCC on or off. In time or alarm
setting mode, press to increase one unit, press
and hold to increase rapidly.
*Radio-controlled clock function not available in every territory
6
BUTTON
MODE
Standard
mode
PRESS
Current Time,
Weekday, Alarm 1,
Alarm 2
Turn Alarm 1/2
on/off
Stop alarm (ringing)
Initiate RCC
receiving
Toggle between
Channel 1-3 and
auto-loop
Turn on backlight and
projection for 5 seconds
(SNOOZE when alarm is
ringing)
HOLD
Enter into
setting mode
Enter into
alarm setting
mode
Turn RCC
on/off
Initiate Outdoor
sensor search
_______
Time
setting
mode
PRESS Conrm setting
_______
Increase Decrease
_______
HOLD
_______ _______
Quick Increase Quick Decrease
_______
Alarm
setting
mode
PRESS Conrm setting
_______
Increase Decrease
_______
HOLD
_______ _______
Quick
Increase
Quick Decrease
_______
7
EN
IT
DE
FR
ES
LCD DISPLAY
1. Time display, Date display or Alarm 1/2 display
(Press [
] to switch).
2. Weather Forecast symbols
3. Weekday display
4. Indoor Temperature display
5. Outdoor Temperature display
(Channel 1-3)
[
] Alarm 1 ON
[ ] Alarm 2 ON
[ ] RCC signal received
[ ] Outdoor sensor low battery indicator
[ ] Main unit low battery indicator
[
] Receiving Outdoor sensor signal
[
] Outdoor sensor auto-loop function is active
(Channel 1-3 loop)
[ ] Outdoor sensor channels
8
GETTING STARTED
INSERT BATTERIES
1. Remove the battery door from the back.
2. Insert 2x AAA (LR03)/1.5V batteries. Please en-
sure the polarities (+/-) of the batteries match upon
installation.
3. Reattach the battery door.
NOTE: Replace batteries when [
] displays, or
when the display is dim.
AC/DC POWER ADAPTER
Only use a compatible AC/DC Power adapter (3.6V
4
100mA). Plug the power cable to the power jack
and the power adapter to a suitable power outlet.
OUTDOOR SENSOR
The main unit can receive data from up to 3 outdoor
sensors. 1 Sensor is included with delivery.
1. Remove the battery door from the back.
2. Select a channel, then press TX.
3. Insert 2x AAA (LR03)/1.5V batteries. Please en-
sure the polarities (+/-) of the batteries match upon
installation.
4. Reattach the battery door.
5. Place the sensor within 30 m (98 ft) of the main unit
using the table stand or wall mount.
TO SEARCH FOR A SENSOR:
Press and hold [
] to initiate outdoor sensor search.
The sensor reception icon in the outdoor sensor area
shows the status:
FLASH
(searching for sensor) or
(sensor found).
NOTE: The transmission range may vary depending
on many factors. You may need to experiment with
various locations to get the best results.
9
EN
IT
DE
FR
ES
CLOCK
CLOCK RECEPTION
1. When you insert or replace the batteries, RCC recep-
tion is initiated. To manually start RCC reception
press the [
] button.
2. The receiving process duration is 2-10 minutes. If
the signal is weak, it could take up to 24 hours to
receive a valid signal.
3. During receiving process, the RCC signal symbol
shows: [
].
4. If the RCC receiving process is successful, a com-
pleted RCC symbol [
] will be shown in the display
and the date and time will be set automatically. If it
fails within 7 minutes, RCC setting will quit automati-
cally. If that happens, press [
] button to re-initi-
ate RCC receiving.
5.To stop RCC reception, press and hold the
[
] button.
6. If the device is still not receiving the signal, please
proceed to set the time manually.
NOTE: When using a power adapter, please increase
the separation of the main unit and the power adapter
to avoid interference of RCC signal receiving.
SET THE CLOCK MANUALLY
1. Press and hold [ ] button to enter time and date
setting.
2. The setting parameter will flash.
3. Press [+] button once, the figure will increase 1 unit
(when setting minute, second will reset to 0). Press and
hold the [+] button, the figures will increase rapidly.
4. Press [] button once, the figure will decrease 1
unit (when setting minute, second will reset to 0).
Press and hold the [] button, the figures will de-
crease rapidly.
5. Press [
] button to confirm setting and enter to
next parameter.
6. Sequence of setting: Zone 12/24h format Hour
Minute Year Calendar format (month-day/
day-month) Month Date Temperature unit
(°C/°F) Weekday Language Exit
7. If there is no action in 20 seconds or if you press and
10
hold [ ] button, the setting will be saved and you
will exit the setting mode.
LANGUAGE
1. Press and hold [ ] button to enter time setting.
2. Press and hold [
] button to confirm setting and
exit.
3. Language setting sequence: English (ENG)
Spanish (SPA) Italien (ITA) French (FRE)
German (GER)
4. Press [
] button confirm setting and exit.
TIME ZONE SETTING
To set a different time zone, proceed as follows:
1. Press and hold [
] button to enter time setting.
2. The screen displays ZONE and the numbers start to
flash.
3. Press [+] button to increase or [] button to decrease
the Time zone offset.
4. Press and hold [
] button to confirm setting and
exit.
°C/°F SETTING
1. Press and hold [ ] button to enter time setting.
2. Press [
] button several times until you reach the
Temperature unit setting.
3. Press [+] or [-] button to switch Celsius (°C) / Fahr-
enheit (°F).
4. Press and hold [
] button to confirm setting and
exit.
ALARM
SETTING/ADJUSTING DUAL ALARM TIME
You can set two alarm times (AL1 and AL2).
1. Press and hold [
] button to enter alarm setting
mode.
2. The setting parameter will flash.
3. Press [+] or [-] button to set the desired data.
4. Press [
] button to confirm setting and enter to
next parameter.
5. Sequence of setting: Hour Minute
6. Now press [+] or [-] to toggle Weekday alarm on or
off and press [
] button to confirm.
The Alarm rings only on weekdays when the setting
13
EN
IT
DE
FR
ES
SPECIFICATIONS
MAIN UNIT:
Dimensions
128 x 26 x 91 mm (L x W x H)
Weight
158 g (Exclude batteries)
Temperature display range:
-5°C to +50°C (23°F to 122°F)
Accuracy:
0° to +40°C: +/- 1°C (+/-2°F)
<0° and >+40°C: +/- 2°C (+/-4°F)
Resolution:
0.1°C (0.2°F)
Power:
2x AAA (LR03) 1.5V batteries,
Power adapter 3.6V
OUTDOOR SENSOR:
Dimensions:
50 x 22 x 96 mm (L x W x H)
Weight:
50 g (Exclude batteries)
Transmission range:
30 m (98 ft)
Temperature range:
-20°C to 60°C (-4°F to 140°F)
Signal frequency:
433 MHz
Maximum transmission power:
under 10mW
Power:
2x AAA (LR03) 1.5V batteries
14
EC DECLARATION OF CONFORMITY
Hereby, Bresser GmbH declares that the
equipment type with part number: RPW3008
is in compliance with Directive: 2014/53/
EU. The full text of the EU declaration of conformity is
available at the following internet address: www.bress-
er.de/download/RPW3008/CE/RPW3008_CE.pdf
RCM DECLARATION OF CONFORMITY
The product complies with electrical
safety, EMC and radio spectrum regulatory
requirements for products supplied to the
Australia or New Zealand market.
NOTES ON CLEANING
• Remove the batteries before cleaning.
• Only use a dry cloth to clean the exterior of the
device. To avoid damaging the electronics, do not
use any cleaning uid.
• Protect the device from dust and moisture.
DISPOSAL
Dispose of the packaging materials properly,
according to their type, such as paper or card-
board. Contact your local waste-disposal ser-
vice or environmental authority for information on the
proper disposal.
Do not dispose of electronic devices in the
household garbage!
As per the Directive 2002/96/EC of the Euro-
pean Parliament on waste electrical and elec-
tronic equipment and its adaptation into German law,
used electronic devices must be collected separately
and recycled in an environmentally friendly manner.
In accordance with the regulations concern-
ing batteries and rechargeable batteries, dis-
posing of them in the normal household
waste is explicitly forbidden. Please make sure to
dispose of your used batteries as required by law — at
a local collection point or in the retail market. Dis-
posal in domestic waste violates the Battery Direc-
tive. Batteries that contain toxins are marked with a sign
and a chemical symbol.
15
EN
IT
DE
FR
ES
Cd¹ Hg² Pb³
1
battery contains cadmium
2
battery contains mercury
3
battery contains lead
WARRANTY & SERVICE
The regular guarantee period is 2 years and begins
on the day of purchase. To benet from an extended
voluntary guarantee period as stated on the gift box,
registration on our website is required.
You can consult the full guarantee terms as well
as information on extending the guarantee period
and details of our services at www.bresser.de/
warranty_terms.
Would you like detailed instructions for this product
in a particular language? Then visit our website via
the link below (QR code) for available versions.
Alternatively you can also send an email to
manuals@bresser.de or leave a message on +49 (0)
28 72 – 80 74-220*. Please always state your name,
precise address, a valid phone number and email
address, as well as the article number and name.
*Number charged at local rates in Germany (the
amount you will be charged per phone call will
depend on the tariff of your phone provider); calls
from abroad will involve higher costs.
www.bresser.de/warranty_terms
30
ZU DIESER ANLEITUNG
Lesen Sie vor der Benutzung des Geräts aufmerk-
sam die Sicherheitshinweise und die Bedienungs-
anleitung.
Bewahren Sie diese Bedienungsanleitung für die er-
neute Verwendung zu einem späteren Zeitpunkt auf.
Bei Verkauf oder Weitergabe des Gerätes ist die Be-
dienungsanleitung an jeden nachfolgenden Besitzer/
Benutzer des Produkts weiterzugeben.
Das Gerät ist
nur für den Betrieb in Innenräumen bestimmt!
ALLGEMEINE
SICHERHEITSHINWEISE
GEFAHR eines STROMSCHLAGS! Dieses Gerät be-
inhaltet Elektronikteile, die über eine Stromquelle
(Netzteil und/oder Batterien) betrieben werden.
Die Nutzung darf nur, wie in der Anleitung beschrie-
ben erfolgen, andernfalls besteht GEFAHR eines
STROMSCHLAGS!
ERSTICKUNGSGEFAHR! Kinder sollten das Gerät
nur unter Aufsicht benutzen. Verpackungsmateria-
lien (Plastiktüten, Gummibänder, etc.) von Kindern
fernhalten! Es besteht ERSTICKUNGSGEFAHR!
VERÄTZUNGSGEFAHR! Batterien gehören nicht in
Kinderhände! Achten Sie beim Einlegen der Batte-
rie auf die richtige Polung. Ausgelaufene Batterie-
säure kann zu Verätzungen führen! Vermeiden Sie
den Kontakt von Batteriesäure mit Haut, Augen und
Schleimhäuten. Spülen Sie bei Kontakt mit der Säure
die betroffenen Stellen sofort mit reichlich klarem
Wasser und suchen Sie einen Arzt auf.
BRAND-/EXPLOSIONSGEFAHR! Setzen Sie das Ge-
rät keinen hohen Temperaturen aus. Benutzen Sie
nur die empfohlenen Batterien. Gerät und Batterien
nicht kurzschließen oder ins Feuer werfen! Durch
übermäßige Hitze und unsachgemäße Handha-
bung können Kurzschlüsse, Brände und sogar Ex-
plosionen ausgelöst werden!
Bauen Sie das Gerät nicht auseinander! Wenden Sie
sich im Falle eines Defekts bitte an Ihren Fachhänd-
ler. Er nimmt mit dem Service-Center Kontakt auf
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bresser RPW3008 Explore Scientific bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bresser RPW3008 Explore Scientific in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 0,93 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info