785444
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
UKCA Declaration of Conformity
Bresser UK Ltd. has issued a „Declaration of Conformity“ in accordance with applicable guidelines
and corresponding standards. The full text of the UKCA declaration of conformity is available at
the following internet address: www.bresser.de/download/7709973/UKCA/7009973_UKCA.pdf
Bresser UK Ltd. • Suite 3G, Eden House, Enterprise Way, Edenbridge, Kent TN8 6Hf, Great Britain
NOTES ON CLEANING
Remove the batteries before cleaning.
Only use a dry cloth to clean the exterior of the device. To avoid damaging the electronics, do
not use any cleaning fl uid.
Protect the device from dust and moisture.
WARRANTY & SERVICE
The regular guarantee period is 5 years and begins on the day of purchase. You can consult the
full guarantee terms as well as details of our services at www.bresser.de/warranty_terms. Would
you like detailed instructions for this product in a particular language? Then visit our website via the
link below (QR code) for available versions. Alternatively you can also send an email to manuals@
bresser.de or leave a message on +49 (0) 28 72 – 80 74-220*. Please always state your name,
precise address, a valid phone number and email address, as well as the article number and name.
*Number charged at local rates in Germany (the amount you will be charged per phone call will depend
on the tariff of your phone provider); calls from abroad will involve higher costs.
www.bresser.de/warranty_terms
SERVICE AND WARRANTY:
www.bresser.de/P7009973
MANUAL DOWNLOAD:
OVERVIEW
WIRELESS THERMO POOL SENSOR
1. LCD display
2. Thermo sensor
3. [ °C /°F ] key
4. [ CHANNEL ] slide switch
- Assign the sensor to channel 1,2,3,4,5,6 or 7.
5. Battery compartment
- Accommodates 2 x AA size batteries.
6. [ RESET ] key
7. Wire hole
8. Top case lock indicator
GETTING STARTED
1. Turn the bottom case anti-clockwise
to open.
2. Select the sensor channel.
Art.No.: 7009973
Pool/Spa
Water temperature Sensor
EN INSTRUCTION MANUAL
DE BEDIENUNGSANLEITUNG
EN INSTRUCTION MANUAL
About this Instruction Manual
These operating instructions are to be considered a component of the device.
Please read the safety instructions and the operating instructions carefully before use.
Keep these instructions for renewed use at a later date. When the device is sold or given to someone
else, the instruction manual must be provided to the new owner/user of the product.
GENERAL WARNINGS
Risk of electric shock — This device contains electronic components that operate via a
power source (batteries). Children should only use the device under adult supervision. Only
use the device as described in the manual; otherwise, you run the risk of an electric shock.
Choking hazard Children should only use the device under adult supervision. Keep
packaging material, like plastic bags and rubber bands, out of the reach of children, as these
materials pose a choking hazard.
Risk of chemical burn Keep batteries out of the reach of children! Make sure you insert
the batteries correctly. Leaking battery acid can lead to chemical burns. Avoid contact of
battery acid with skin, eyes and mucous membranes. In the event of contact, rinse the
aff ected region immediately with a plenty of water and seek medical attention.
Risk of fi re/explosion Do not expose the device to high temperatures. Use only the
recommended batteries. Do not short-circuit the device or batteries, or throw them into a fi re.
Excessive heat or improper handling could trigger a short-circuit, a fi re, or an explosion.
• Do not disassemble the device. In the event of a defect, please contact your dealer. The dealer
will contact the Service Centre and can send the device in to be repaired, if necessary.
• Use only the recommended batteries. Always replace weak or empty batteries with a new,
complete set of batteries at full capacity. Do not use batteries from diff erent brands or with
diff erent capacities. The batteries should be removed from the unit if it has not been used for
a long time.
SCOPE OF DELIVERY
Sensor, Operating instructions.
BEFORE YOU BEGIN
• We recommend using alkaline batteries. If temperatures regularly fall below 0°C (32°F), we
recommend using lithium batteries.
Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power
requirements.)
• Insert batteries before fi rst use, matching the polarity in the battery compartment.
2x AA Batteries are required.
EC Declaration of Conformity
Hereby, Bresser GmbH declares that the equipment type with part number: 7009973 is
in compliance with Directive: 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
www.bresser.de/download/7009973/CE/7009973_CE.pdf
3. Remove the battery door.
4. Insert 2 x AA size batteries into the
battery compartment. Make sure you
insert them the right way according to
the polarity information marked on the
battery compartment.
AA x 2
5. Close the battery door.
6. Twist the bottom case clockwise and
make sure the top and button lock
indicator align to complete the setup.
NOTE:
Ensure the water tight O-ring is properly
aligned in place to ensure water resistant.
NOTE:
- Do not twist the sensor cable and keep it straight.
- Once the channel is assigned to a Wireless thermo sensor, you can only change it by
removing the batteries or resetting the unit.
- After replacing the batteries of the wireless sensor or the unit fails to receive wireless
sensor signal of a specifi ed channel, press [ SENSOR ] key on the console unit to
manually receive the sensor signal again.
LCD DISPLAY ON THE SENSOR
Once the sensor power up, you can fi nd the following information that show on the
sensor’s LCD display.
13
2
1. Current channel of the sensor (e.g. switch to channel “6”)
2. Low battery indicator
3. Current Temperature reading
WIRELESS SENSOR SIGNAL RECEIVING (DISPLAY CONSOLE)
This pool sensor can support diff erent 7CH console, user can base on the following step
to setup the display console.
1. In normal mode, press the console [ SENSOR ] key once to start receiving the
sensor signal of current on displaying channel. The signal icon will fl ash.
For example, when CH 6 is displayed, pressing [ SENSOR ] key will start receive for
CH 6 only.
2. The signal icon will fl ash until the reception succeeded. If no signal is received within
5 minutes the icon will disappear.
The icon blinks once every time when incoming wireless sensor
signal is received (every 60s)
Fair wireless sensor signal
Weak wireless sensor signal
Bad / no wireless sensor signal
3. If the signal for Ch 1~7 has discontinued and does not recover within 15 minutes, the
temperature and humidity will display “Er” for the corresponding channel.
4. If the signal does not recover within 48 hours, the “Er” display will become
permanent. You need to replace the batteries of the “Er” channel’s sensors and then
press [ SENSOR ] key to pair up with the sensors per each “Er” channel again.
NOTE:
The operation or signal icons of diff erent display consoles may be diff erent, please refer
to the user manual of your display console for more detail.
SENSOR PLACEMENT
Place the sensor in the pool within 30 meters (100 feet) of the display console and avoid
side wall of the pool block the sensor signal.
Display
console Pool sensor placement
LOW BATTERY ICON
If the sensor is low in battery, the low battery icon “ ” will display on the LCD of the
sensor and display console.
NOTE:
On the display console, the low battery icon will only appear when the corresponding
channel is displaying.
PRECAUTIONS WHEN OPENING AND CLOSING THE SENSOR CASING
Outer O-ring
Inner O-ring 1. Opening the casing:
- Unscrew the bottom casing carefully in
direction indicated
- There are 2 o-rings , one inner and one
outer in blue color between the 2 casings
- The outer O-ring may drop down and
rest on the bottom casing.
Inner O-ring Outer O-ring 2. Before closing the casing:
- Ensure the unit is wiped dry completely
or leave to dry to avoid trapping any
moisture inside
- Carefully place both O-rings back into
their respective grooves, and apply
water-tightness jell/grease if necessary
Misplaced
outer O-ring
3. Closing the casing:
-Ensure the outer O-ring is not misplaced (as
shown) when closing the casing
-Close the casing tightly such that the 2
vertical arrows aligned vertically and pointing
to each other (circled in gray) Water droplets
may condense on the LCD if moisture is
trapped inside the unit. Just leave the unit
open and let the droplet evaporate naturally
before closing the casings
IMPORTANT NOTE
- Read and keep these instructions.
- Do not subject the unit to excessive force, shock, dust, temperature or humidity.
- Do not cover the ventilation holes with any items such as newspapers, curtains etc.
-Technical specifi cations and user manual contents for this product are subject to
change without notice.
SPECIFICATIONS
Dimensions (W x H x D) 100 x 207.5 x 100 mm
Main power 2 x AA size 1.5V batteries
(Alkaline battery recommended)
Operating temperature range -5°C ~ 60°C ( -23°F ~ 140°F ) do not recommend
under freeze condition
RF frequency 868Mhz (EU, UK)
RF Transmission interval 60 seconds
RF transmission range Up to 30 m (100 feet) line of sight
DISPOSAL
Dispose of the packaging materials properly, according to their type, such as paper
or cardboard. Contact your local waste-disposal service or environmental authority
for information on the proper disposal.
Do not dispose of electronic devices in the household garbage!
As per the Directive 2002/96/EC of the European Parliament on waste electrical
and electronic equipment and its adaptation into German law, used electronic
devices must be collected separately and recycled in an environmentally friendly manner.
In accordance with the regulations concerning batteries and rechargeable batteries,
disposing of them in the normal household waste is explicitly forbidden. Please
make sure to dispose of your used batteries as required by law — at a local collection
point or in the retail market. Disposal in domestic waste violates the Battery Directive.
Batteries that contain toxins are marked with a sign and a chemical symbol.
Cd¹ Hg² Pb³
1 battery contains cadmium
2 battery contains mercury
3 battery contains lead
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bresser 7009973 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bresser 7009973 in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 2.89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info