632885
14
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
14
USING TABLE STAND OR WALL
MOUNTING
The main unit has a removable table stand, which
- when connected - can support the unit on a flat
surface. It is possible to remove the stand and
mount the unit on a wall using the recessed screw
hole. The same applies to the remote unit; it can be
placed on a flat surface or mounted on a wall using
the recessed screw hole.
OPERATION
Receiving measurements and time signal
Once batteries are placed in the remote unit, it will
start transmitting temperature readings at roughly 45
second intervals. As soon as batteries are installed
in the main unit it will start searching for a signal
from the remote sensor for about 3 minutes. Upon
successful reception of the signal, the outdoor
temperature will be displayed on the main unit. The
main unit will automatically update its readings at
about 45 second intervals.
Subsequently, the main unit will attempt to receive
the DCF77 radio signal. The reception symbol
flashes. When the time signal is received after 3-5
minutes, the current time and date appear in the
display. The reception symbol will now be shown
permanently in the display. Date and time are
automatically updated daily at 2:05 o’clock (CET) by
the main unit.
Temperature and humidity
1. Press the DOWN button to switch the displayed
temperature between °C and °F.
2. Once the battery is installed, the main unit
will start displaying the interior measurement
information. The main unit will display the
information from the remote sensor for the first
time approximately 3 minutes after the power
supply was established.
3. There are 3 different icons to displaying the
indoor climate as below:
humidity is same or lower than 40%
humidity is same or higher than 70%
humidity is higher than 40% but lower than 70%;
at same time, the temperature is higher than 20°C
(68°F), but lower than 27°C (80.6°F)
Max/Min records of temperature and humidity
1. Pressing and releasing the UP button in short
intervals repeatedly makes the display alternate
between the current temperature and humidity
as well as MIN/MAX recordings.
2. In MIN/MAX temperature display mode, hold UP
button to reset all indoor and outdoor MIN/MAX
records to current values.
4. The MIN/MAX temperature and humidity values
will be recorded automatically.
3. The MIN/MAX temperature and humidity records
automatically will be reset at 0:00 o’clock (12:00
a.m.) every day.
Current weather and weather trend
The weather forecast is depending on the
fluctuation of temperature and humidity. From
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bresser 70-00001 TemeoTrend Sunny bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bresser 70-00001 TemeoTrend Sunny in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans als bijlage per email.

De handleiding is 1,38 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info