495867
10
Verklein
Vergroot
Pagina terug
1/86
Pagina verder
IRT 4520
IRT 4020
Type 6022
Type 6023
IRT 4520/4020 EK KURTZ DESIGN 12.02.03
ThermoScan
1-800-327-7 226
Type: 6022
I / O
mem
6022434_IRT_AP_S1 Seite 1 Donnerstag, 21. September 2006 2:29 14
Downloaded from www.Manualslib.com manuals search engine
Braun Infolines
0800 783 70 10
1 800 509 448
+7 495 258 62 70
852-25249377
(Audio Supplies Company Ltd.)
GB
IRL
RUS
HK
English 4
Lietuvi˜
13
Latvie‰u
22
Eesti
31
êÛÒÒÍËÈ
40
49
59
Internet:
www.braun.com
Manufactured by:
Braun GmbH
Frankfurter Str. 145
61476 Kronberg / Germany
6-022-434/00/IX-06/M
GB/LT/LV/EST/RUS/China/ChinaHK
Printed in Germany
6022434_IRT_AP_S2 Seite 1 Donnerstag, 21. September 2006 2:28 14
Downloaded from www.Manualslib.com manuals search engine
10
6
5
4
2
1
7
8
3
b
a
IRT 4520
IRT 4020
9
11
1-800-327
-
7
226
Ty pe: 6022
E
x
a
c
T
e
m
p
ThermoScan
ThermoScan
x
a
c
T
e
m
p
I / O
mem
5
4
2
1
3
1-800-327
-
7
226
Ty pe: 6022
start
7
8
9
ThermoScan
x
a
c
T
e
m
p
start
6022434_IRT_AP_S3 Seite 1 Donnerstag, 21. September 2006 2:29 14
Downloaded from www.Manualslib.com manuals search engine
4
The Braun ThermoScan thermometer has been carefully developed
for accurate, safe and fast temperature measurements in the ear.
The shape of the thermometer prevents it from being inserted too far
into the ear canal to hurt the eardrum.
However, as with any thermometer, proper technique is critical to
obtaining accurate temperatures. Therefore, read the use
instructions carefully and thoroughly.
Important
The operating ambient temperature range for this thermometer
is 1040 °C (50104 °F).
Do not expose the thermometer to temperature extremes
(below –20 °C / –4 °F or over 50 °C / 122 °F) nor excessive humidity
(> 95 % RH).
This thermometer must only be used with genuine Braun
ThermoScan Lens Filters (LF 40). Never use this thermometer
without a new, clean lens filter attached.
Keep lens filters out of reach of children.
This thermometer is intended for household use only.
Use of this thermometer is not intended as a substitute for con-
sultation with your physician.
How does Braun ThermoScan work?
Braun ThermoScan measures the infrared heat generated by the
eardrum and surrounding tissues. To avoid gross temperature dif-
ferences, the sensor itself is brought to a temperature close to that of
the human body. When the Braun ThermoScan is placed in the ear,
it continuously monitors the infrared radiation. The measurement will
be finished and the result is displayed, when an accurate reading can
be assured.
Why measure in the ear?
The goal of thermometry is to measure core body temperature which
is the temperature of the vital organs. Ear temperatures accurately
reflect core body temperature, since the eardrum shares blood supply
with the temperature control center in the brain, the hypothalamus.
Therefore, changes in body temperature are reflected sooner and more
accurately in the ear than at other sites.
Axillary temperatures only measure skin temperature and therefore,
are not a reliable indicator of core body temperature.
Oral temperatures are influenced by drinking, eating and breathing.
Rectal temperatures lag behind changes in core body temperature
and there is a risk of cross-contamination.
English
6022434_IRT_AP_N Seite 4 Donnerstag, 21. September 2006 2:31 14
Downloaded from www.Manualslib.com manuals search engine
5
Body temperature
Normal body temperature is a range. The following table shows
that this normal range also varies by site. Therefore, readings from
different sites should not be directly compared.
As well, a person’s normal temperature range tends to decrease
with age. The following table shows normal ThermoScan ranges
by age.
However, the range of normal also varies from person to person
and fluctuates throughout the day. It is therefore important to deter-
mine your normal temperature range. This is easily done using Braun
ThermoScan. Practice taking temperatures on yourself and healthy
family members to determine their normal temperature ranges.
Note: When consulting your physician, communicate that the
ThermoScan temperature is a temperature measured in the ear and
if possible, note the individual’s normal ThermoScan temperature
range as additional reference.
Normal ranges by site:
Axillary: 34.7 – 37.3 °C 94.5 – 99.1 °F
Oral: 35.5 – 37.5 °C 95.9 – 99.5 °F
Rectal: 36.6 – 38.0 °C 97.9 – 100.4 °F
ThermoScan: 35.8 – 38.0 °C 96.4 – 100.4 °F
Normal ThermoScan ranges by age:
0 – 2 years 36.4 – 38.0 °C 97.5 – 100.4 °F
3 – 10 years 36.1 – 37.8 °C 97.0 – 100.0 °F
11 – 65 years 35.9 – 37.6 °C 96.6 – 99.7 °F
> 65 years 35.8 – 37.5 °C 96.4 – 99.5 °F
6022434_IRT_AP_N Seite 5 Donnerstag, 21. September 2006 2:31 14
Downloaded from www.Manualslib.com manuals search engine
6
Product description
1. Lens filter
2. Probe
3. Lens filter detector
4. Lens filter ejector
5. Display
6. «I/O» button
(On/memory function – IRT 4520 only)
7. «ExacTemp» light
8. «start» button
9. Battery door
10. Protective cover (IRT 4520)
11. Cap (IRT 4020)
How to use your Braun ThermoScan?
1. To achieve accurate readings, make sure a new,
clean lens filter (1) is in place before each
measurement.
2. IRT 4020:
Push the «start» button (8).
IRT 4520:
Push the «I/O» button (6).
During an internal self-check, the display shows
all segments. Then the last temperature taken will
be displayed together with «MEM».
Wait for the ready signal beep and the ready
symbol in the display.
3. Fit the probe snuggly into the ear canal, then push
the «start» button (8).
start
IRT 4020
T
e
m
p
a
c
IRT 4520
ThermoScan
E
x
a
c
T
e
n
6022434_IRT_AP_N Seite 6 Donnerstag, 21. September 2006 2:31 14
Downloaded from www.Manualslib.com manuals search engine
7
If the probe has been fitted securely into the ear
canal during the complete measuring process,
a long beep will signal the end of the measuring
process. You can be assured to have taken an
accurate temperature reading. The result is shown
on the display (5).
If you take the temperature of another person, the
«ExacTemp» light (7) will be of help. It flashes
during the measuring process as long as the
probe is securely positioned, and lights up con-
tinuously when an accurate reading has been
taken.
4. If the probe has not been constantly placed in a
stable position in the ear canal, a sequence of
short beeps will sound, the «ExacTemp» light will
go out and the display will show an error message
(«POS» = position error).
5. For the next measurement, eject the used lens
filter (push ejector (4)) and put on a new, clean lens
filter.
IRT 4020:
Clear the display by pushing the
«start» button once.
IRT 4520: Clear the display by pushing the
«I/O» button once.
Wait for the ready signal. Fit the probe snuggly
into the ear canal, then push the «start» button.
The Braun ThermoScan ear thermometer turns off
automatically after 60 seconds of inactivity.
The IRT 4520 can also be turned off by pressing
the «I/O» button for at least three seconds.
The display will shortly flash «OFF» and after
releasing the button it will go blank.
Temperature taking hints
The right ear reading may differ from the reading
taken at the left ear. Therefore, always take the
temperature in the same ear.
The ear must be free from obstructions or excess
earwax build-up to take an accurate reading.
External factors may influence ear temperatures,
including when an individual has:
been lying on one ear or the other
had their ears covered
been exposed to very hot or very cold tempera-
tures, or
been recently swimming or bathing.
E
x
a
c
T
e
n
6022434_IRT_AP_N Seite 7 Donnerstag, 21. September 2006 2:31 14
Downloaded from www.Manualslib.com manuals search engine
8
In these cases, remove the individual from the
situation and wait 20 minutes prior to taking a
temperature.
Use the untreated ear if prescription ear drops or
other ear medications have been placed in the ear
canal.
Memory mode
The last temperature taken is stored in its memory
and will be automatically displayed when it is turned
on again. The display will show «MEM».
IRT 4520:
This model stores the last 8 temperature readings.
To display the stored readings, the thermometer
must be turned on. Then press the «I/O» button for
at least 1 second. The display shows the memory
number (e. g. MEM 1), and when releasing the
«I/O» button, the stored temperature for that memory
number is displayed, together with «MEM».
If «I/O» button is pressed too long, the thermometer
will be switched off. Each further pressing of the
«I/O» button displays the remaining memory numbers
(up to MEM 8).
MEM 1 is the latest reading, MEM 8 would be the
oldest.
The memory mode is left automatically after
displaying the oldest reading, or after pressing the
«I/O» button for at least 1 second.
Changing the temperature scale
Your Braun ThermoScan is shipped with the Celsius
(°C) temperature scale activated. If you whish to
switch to Fahrenheit (°F) and/or back from Fahrenheit
to Celsius, proceed as follows:
(1) Make sure the thermometer is turned off.
(2) Press and hold down the «start» button (IRT 4020)
or the «I/O» button (IRT 4520). After about 3
seconds the display will show this sequence:
«°C» / «SET» / «°F» / «SET» ...
(3) Release the «start» button / «I/O» button when the
desired temperature scale is shown. There will be
a short beep to confirm the new setting, then the
thermometer is turned off automatically.
6022434_IRT_AP_N Seite 8 Donnerstag, 21. September 2006 2:31 14
Downloaded from www.Manualslib.com manuals search engine
9
Care and cleaning
The probe tip is the most delicate part of the
thermometer.
It has to be clean and intact to ensure accurate
readings.
If the thermometer is ever accidentally used without
a lens filter, clean the probe tip as follows:
Very gently wipe the surface with a cotton swab or
soft cloth moistened with alcohol. After the alcohol
has completely dried out, you can put a new lens
filter on and measure.
If the probe tip is damaged, contact Braun.
Use a soft, dry cloth to clean the thermometer display
and exterior.
Do not use abrasive cleaners. Never submerge this
thermometer in water or any other liquid.
Store thermometer and lens filters in a dry location
free from dust and contamination and away from
direct sunlight.
Additional lens filters (LF 40) are available at most
stores carrying Braun ThermoScan or at Braun
Service Centers.
6022434_IRT_AP_N Seite 9 Donnerstag, 21. September 2006 2:31 14
Downloaded from www.Manualslib.com manuals search engine
10
Trouble-shooting
Error message Situation Solution
No lens filter is attached. Attach new, clean lens filter.
The thermometer cannot identify
a secure position of the probe.
An accurate measurement was
not possible.
POS = position error
IRT 4020:
Clear the display by
pushing the «start» button once.
IRT 4520: Clear the display by
pushing the «I/O» button once.
Take care that the positioning of
the probe is correct and remains
stable.
Ambient temperature is not within
the allowed operating range
(10 40 °C or 50 104 °F).
Allow the thermometer to remain
in a room for 30 minutes where
the temperature is between
10 and 40 °C or 50 and 104 °F.
Temperature taken is not within
typical human temperature range
(34 42.2 °C or 93.2108 °F).
HI = too high
LO = too low
Make sure a new, clean lens filter
is attached and thermometer is
properly inserted. Then, take a
new temperature.
System error – self-check display
flashes continuously and will not
be followed by the ready beep
and the ready symbol.
If error persists,
If error still persists,
Wait 1 minute until the thermo-
meter turns off automatically, then
turn on again.
... reset the thermometer by re-
moving the batteries and putting
them back in.
… have the thermometer checked
at a Braun Customer Service
Center.
6022434_IRT_AP_N Seite 10 Donnerstag, 21. September 2006 2:31 14
Downloaded from www.Manualslib.com manuals search engine
11
Trouble-shooting
Error message Situation Solution
Battery is low, but thermometer
will still operate correctly.
Insert new batteries.
Battery is too low to take correct
temperature readings.
Insert new batteries.
Do you have any further
questions?
Call Braun Infoline,
please see page 2.
Replacing the batteries
The thermometer is supplied with two 1.5 V type AA (LR 06). For best
performance, we recommend Duracell
®
alkaline batteries.
Insert new batteries when the battery symbol appears on the display.
Open the battery compartment. Remove the batteries and replace with
new batteries, making sure the poles are in the right direction.
Slide battery door back until it snaps in place.
To protect the environment, dispose of empty batteries at
your retail store or at appropriate collection sites according to
national or local regulations.
Calibration
The thermometer is initially calibrated at the time of manufacture.
If this thermometer is used according to the use instructions, periodic
re-adjustment is not required. If at any time you question the accuracy
of measurement, please contact Braun Infoline, phone (see page 2).
Manufacturing date is given by the LOT number located in the battery
compartment. The first number after LOT represents the last digit of the
year of manufacture.
The next three digits give the day of the year of manufacture.
An example: LOT 0116 xx xx – this product has been manufactured on
the 116th day of the year 2000.
1
2
T
h
e
r
m
o
S
c
a
n
6022434_IRT_AP_N Seite 11 Donnerstag, 21. September 2006 2:31 14
Downloaded from www.Manualslib.com manuals search engine
10

Hulp nodig? Stel uw vraag in het forum

Spelregels
2

Forum

Braun-Thermoscan-Type-6023
6
12
18
  • Hoe zet ik de meter om van Fahrenheit naar Celsius? Gesteld op 28-10-2020 om 14:18

    Reageer op deze vraag Misbruik melden
  • Hoe wis je het geheugen van de Braun thermoskan 6023 Gesteld op 16-10-2020 om 13:01

    Reageer op deze vraag Misbruik melden
  • Hoe kan ik de ThermoScan type 6023 terugzetten naar Celsius. Er wordt nu Fahrenheit weergegeven. Graag uw oplossing, bij voorbaat dank. Gesteld op 27-9-2020 om 15:27

    Reageer op deze vraag Misbruik melden
  • Mem knop vasthouden en knop meten in drukken en los laten, zo moet het lukken. succes. Gr. Robert Geantwoord op 8-11-2020 om 11:46

    Waardeer dit antwoord (20) Misbruik melden
  • Batterij moest vervangen worden. Nieuwe batterijen correct geplaatst, maar er komt niets meer op de display. Ook niet als je de aan knop ingedrukt houd? Gesteld op 28-8-2020 om 00:24

    Reageer op deze vraag Misbruik melden
  • Hoe krijg ik de thermometer van Fahrenheit naar celsius Gesteld op 24-8-2020 om 11:11

    Reageer op deze vraag Misbruik melden
    • Uw Braun ThermoScan wordt geleverd met een
      geactiveerde Celsius (°C) temperatuurschaal. Indien u
      wenst over te schakelen op Fahrenheit (°F) en/of terug
      van Fahrenheit naar Celsius, doet u dit als volgt:
      (1) Zorg ervoor dat de thermometer is uitgeschakeld.
      (2) Druk op de startknop (IRT 4020), of de «I/O» knop
      (IRT 4520) en houd deze ingedrukt. Na ongeveer
      3 seconden zal het display het volgende
      aangeven: «°C» / «SET» / «°F» / «SET» ...
      (3) Laat de startknop /«I/O» knop los wanneer de gewenste temperatuurschaal op het display staat.
      Er zal een korte piep volgen om de nieuwe
      instelling te bevestigen. Daarna wordt de Geantwoord op 22-9-2020 om 08:40

      Waardeer dit antwoord (30) Misbruik melden
  • Hallo ik krijg steeds de code p0s
    Heb alles gedaan wat in de handleiding staat maar hij blijft het aangeven Gesteld op 11-8-2020 om 15:33

    Reageer op deze vraag Misbruik melden
24

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Braun Thermoscan Type 6023 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Braun Thermoscan Type 6023 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,11 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Braun Thermoscan Type 6023

Braun Thermoscan Type 6023 Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Espanôl, Espanõl, Türkiye - 90 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info