Handleiding Braun KF 7125 - PurAroma 7 (pagina 11 van 82) (Nederlands, Duits, Engels, Frans, Spaans, Pools, Deens, Zweeds, Noors, Fins)

712620

Verklein

Vergroot

Pagina terug

1/82

Pagina verder

Setting the Water Hardness Level

Set the water hardness level on the coffee maker to

the water hardness level for your local area.

• Press the CALC button (c) for a minimum of 3

seconds.

• The default setting (h3) will start flashing.

• Press the SET button (e) to scroll through the

options (h1 = soft, h2 = normal, h3 = hard) and

select the appropriate water hardness level.

• Press the CALC button again to save the hardness

level.

• The pre-set water hardness disappears after 3

seconds and the time of day will show on the LED

control panel.

1 – 4 Cups Setting

• Press the

button (g). The green LED above

the button will illuminate.

• Press START (a) to start brewing.

• The green LED turns off after the brewing cycle is

finished.

Brew Strength Selector

• Press the STRONG button (f) to select brew

strength «strong».

• The green LED above the button will illuminate.

• If the STRONG button is not pressed, regular

coffee strength is automatically selected.

(B) Making Coffee

• Open the reservoir cover (5).

• When filling the water reservoir (3) with fresh cold

water, refer to the water level indicator (inside the

water reservoir) and fill to the desired number of

cups.

• To prepare the exact amount of coffee for the

Braun Thermal Mug (available separately as

accessory), fill to the corresponding water mark

(330 ml) inside the reservoir.

• Insert a paper filter (cone type # 4) in the filter

basket (4).

• Alternatively you can use the gold tone permanent

filter which is available separately.

• Add the desired amount of ground coffee,

corresponding to the number of cups being

brewed. We recommend using 1 tablespoon or 1

coffee measuring scoop of ground coffee per

cup, but use more or less to suit your taste.

• Close the water reservoir and place the carafe in

its position on the carafe stand (6).

• Plug the cord into an electrical outlet and press

the On/Off button (1).

• Press the START button (a) to start brewing

immediately or press TIMER (b) to commence

brewing at the pre-set time.

• During brewing, the indicator light will flash

continuously. Once the brewing cycle is complete,

the light will turn off.

Note: The anti-drip system halts the flow of coffee

from the filter basket when the carafe is removed, so

a cup can be poured before brewing is finished.

The carafe should be returned to the carafe stand

(maximum 20 seconds) to prevent the filter basket

from overflowing.

For Best Results

• When using paper filters, be sure that it is

completely open and fully inserted in the basket.

It may help to fold and flatten the seams of the

paper filter beforehand.

• Store ground coffee in a cool, dry and dark place

in an airtight container.

• For the best performance from your Braun coffee

maker, descale the unit regularly.

Note: The maximum amount of ground coffee the

coffee maker can take is 10 coffee measuring

scoops or tablespoons.

Descaling

For the best performance from your Braun coffee

maker, descale the unit when the LED CALC (c)

lights up solid green. This indicates it is time to

descale your coffee maker.

Frequency will depend upon the hardness of your

tap water and how often you use the coffee maker.

To set water hardness see «Setting the Water

Hardness Level».

You can use a commercially available decalcifying

agent not affecting aluminum.

We recommend using the Braun Descaling Solution

(can be purchased in stores, through the Braun

website, or by calling Customer Service).

Note: For your convenience, the cleaning cycle is

automatic. The entire cleaning cycle including

rinsing can take up to 45 minutes to complete.

• Follow the package instructions of the

decalcifying agent.

• Place the empty carafe in its position on the

carafe stand (6).

• Press the CALC button (c). The green LED above

the button will start flashing.

• Press START (a) to start the descaling program,

while the green LED is still flashing. Once the

descaling process has started, it is not possible to

stop the program until finished.

• When the descaling program has been

completed, the green LED will turn off.

• Discard the cleaning solution and rinse the carafe

thoroughly with clean water.

• Fill the water reservoir with clean, fresh water (not

exceeding 8 cups). Run the coffee maker through

2 complete brew cycles to flush the unit after

descaling.

5713210224_KF_7125_INT_S4-82.indd 11 19.12.16 13:48

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Braun KF 7125 - PurAroma 7 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info