695687
15
Verklein
Vergroot
Pagina terug
1/130
Pagina verder
15
Troubleshooting guide
PROBLEM CAUSE REMEDY
The appliance does not pro-
duce any steam.
There is not enough water in the
water tank.
Unplug the appliance; check if the
anti-limescale fi lter cartridge has
been well prepared and is placed
properly; fi ll water up to max. level;
close the lid of the water tank; plug
in and wait until the temperature
control LED is permanently on;
press the steam button until steam
comes out of the soleplate.
In case above procedure does
not solve the problem take the
following steps: press RESET +
steam buttons together until steam
comes out. Once steam comes out,
release the buttons.
The steam button has not been
pressed.
A new anti-limescale fi lter car-
tridge has just been installed.
The anti-limescale fi lter cartridge
is not placed properly.
The anti-limescale indicator is
on and less or no steam comes
out of the iron when pressing
the steam button.
The anti-limescale fi lter cartridge
needs to be replaced.
Replace the anti-limescale fi lter
cartridge and press the reset button
for 5 seconds until the LED turns
off .
You can also use demineralised wa-
ter. In that case, you need to leave
the anti-limescale fi lter cartridge
in the compartment and press the
reset button for 5 seconds each
time the the antilimescale indicator
turns on.
The appliance emits a loud
noise associated with vibra-
tions (subtle pumping sound is
normal).
A new anti-limescale fi lter car-
tridge has just been installed.
Continue to press the steam button
until the loud noise stops and steam
comes out of the soleplate.
The water tank is empty.
Refi ll the water tank and press the
steam button until the loud noise
stops and steam comes out of the
soleplate.
The anti-limescale fi lter cartridge
is not in place.
Place the anti-limescale fi lter car-
tridge in the compartment.
The anti-limescale fi lter cartridge
is damaged or shows cracks.
Inspect the anti-limescale fi lter car-
tridge thoroughly. If you see any
sign of damage or cracks, replace
the anti-limescale fi lter cartridge
with a new one.
The fi rst time the appliance is
turned on, you notice smoke
/ smell.
Some parts have been treated
with sealer/lubricant which
evaporates the fi rst time the iron
heats up.
This is normal and will stop when
you have used the iron a few times.
If the smoke/smell is still present
after turning off the appliance, con-
tact an authorised Braun Customer
Service.
There is too much steam
coming out of the iron.
Mode turbo is on.
Activate the iCare or eco mode by
pressing the mode button.
5712812131_CareStyle_1_INT_S6-130.indd 155712812131_CareStyle_1_INT_S6-130.indd 15 28.08.18 14:0928.08.18 14:09
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Braun CareStyle Compact IS 2044 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Braun CareStyle Compact IS 2044 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 11,17 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info