40
● Lighting a hob fitted WITH A SAFETY
DEVICE (depending on model)
•
Each burner has its own gas tap which
is opened by pressing down on the
control knob and then turning it anti-
clockwise.
The gas tap is closed when the control
knob is in position “
●●
”.
•
Choose the gas burner you need using
the symbols at the side of each control
knob; (E.g. back right-hand burner ).
•
Your hob is equipped with an
automatic lighting system integrated into
each control knob.
•
To ignite a burner, press down and
turn the knob anti-clockwise until it
is pointing to the maximum
position .
Keep the knob pressed down. This will
trigger off a series of sparks that will light
up the burner.
•
Adjust the flame to the height your
require by turning the control knob
between the and symbols.
•
The safety system for the burners is a metal
rod next to the flame.
Using your hob in all simplicity
•
Choose the gas burner you need using
the symbols at the side of each control
knob;
(E.g. back right-hand burner ).
•
Each burner is controlled by a tap
fitted with a safety system, which cuts the
gas off automatically if ever the flame goes out
by accident (overflowing, drafts, etc.).
•
Your hob is equipped with an
automatic lighting system integrated into
each control knob.
•
To ignite a burner, press down and
turn the knob anti-clockwise juntil it
is pointing to the maximum
position .
•
Adjust the flame to the height your
require by turning the control knob between
the and symbols.
How to use your gas burners?
- If ever your flame goes out, relight it as per normal procedure.
- The flames on the burner are smaller near the grate supports to avoid any damage being
done to the enamel.
- The noise made by certain burners is related to their power and burning gas; this does not
harm the quality of cooking in any way.
Sparker
Gas safety
device
(depending
on model)
● Lighting a hob NOT FITTED WITH A
SAFETY DEVICE (depending on model)
To set off the safety system, keep the knob
pressed completely down for a few seconds
after the flame has lit up.
