552178
19
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
19
EN1 / INTRODUCTION TO YOUR MACHINE
•REMOVING THE TRANSPORT
CLAMPS
Important:
The following operations must be
performed before you use the machine Fig. 1 & 2.
First of all remove the piece of expanded
polystyrene from under the lid.
Rear transport clamp
(Fig. 1
to
)
Unscrew the 6 screws using a No. 10 tube
spanner or a straight-edged screwdriver.
Remove the clamp.
Free the power cable from the plastic holder
clipping it to the transport clamp.
Plug the holes left by the clamp using the plugs
supplied and re-screw the 4 external screws into
the casing.
2 / INSTALLING YOUR MACHINE
•SAFETY ADVICE (continued)
— Do not let children play with the machine and
keep your pets away from it.
— You must immediately make any obsolete
machine unusable. Disconnect and cut off the
power cable flush with the machine. Close the
water tap and remove the hose. Disable the door
lock.
— If there is a risk of frost, disconnect the water
hose and drain off any water that may remain in the
drain hose by placing this as low as possible in a
bowl.
For washer-dryers:
— Before drying, remove the detergent dispensers
placed in the drum with your washing. Their plastic
material cannot withstand the drying temperatures.
•SAVING ENERGY
— Only programme a prewash when it is absolutely
necessary: for example, for very dirty sports or
working clothes, etc.
— A low temperature programme is sufficient for
impeccable washing results when your washing is
only slightly or moderately dirty.
— For washing that is only slightly dirty, select a
short washing cycle.
— Use the right amount of washing products for the
hardness of the water, the amount of washing and
how dirty it is and follow the instructions on the
detergent packs.
For washer-dryers:
— If you spin at high speed, little dampness will
remain and you will therefore consume little
electricity. Even synthetic textiles can be spun
before drying.
— Choosing your drying time well also helps to save
water and electricity.
— Avoid wasting water and electricity by not over-
drying your laundry.
ENVIRONMENTAL PROTECTION
T
his appliance’s packaging material is
recyclable. Help recycle it and protect the
environment by dropping it off in the municipal
receptacles provided for this purpose.
Your appliance also contains a great
amount of recyclable material. It is
marked with this label to indicate that
in countries that are a members of the
European Union the used appliances should
not be mixed with other waste.
This way, the appliance recycling organised
by your manufacturer will be done under the
best possible conditions, in compliance with
European Directive 2002/96/EC on Waste
Electrical and Electronic Equipment. Contact
your town hall or your retailer for the used
appliance collection points closest to your
home.
We thank you doing your part to protect the
environment.
1
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Brandt WTD 1276 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Brandt WTD 1276 in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 2,27 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Brandt WTD 1276

Brandt WTD 1276 Gebruiksaanwijzing - Deutsch - 20 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info