49
11/ PROGRAMMING
EN
•
Audible signal adjustment
The setting can be used to activate or deacti-
vate the beep heard at the end of the pro-
gramme.
—
Go to the “Set” position by pressing the pro-
gramme button
. The corresponding light
comes on.
Press “Delayed start”
twice: the screen
shows
BBpp00 :: bbeeeepp ddeeaaccttiivvaatteedd..
Press the programme button again if you
want to activate the beep. The screen shows
BBppII :: bbeeeepp aaccttiivvaatteedd..
Confirm by pressing “
SSttaarrtt
/
C.”.
CC
•
Stopping the appliance
When the programme has finished, press the
“On/Off” button“ .
•
Cancelling a programme
Hold down the
“Start /
CC
..
”
button for a few
seconds. The “Time remaining” light goes out
and you can then re-programme the machine.
EE
AA
Remarks:
The door’s electrical safety system can cause the indicator lights to illuminate briefly when
the door is opened or closed. This phenomenon does not affect your machine’s operation.
If required, and particularly after the water softener has been reset, the programme may start with
three minutes of resin regeneration. This is a silent operation.