EN
28
44 //
SPECIAL MESSAGES, INCIDENTS
Warning
In the event of breakage, crack or fissure, even minimal, of the vitroceramic glass,
immediately disconnect your appliance to prevent a risk of electric shock.
Contact the After-Sales Service Department.
YOU OBSERVE THAT: POSSIBLE CAUSES: WHAT YOU SHOULD DO:
A special lamp appears.
Your installation blows a fuse.
Only one side works.
Working normally.
The electrical connection of
your hob is incorrect.
Nothing.
Check that it is compliant.
See section on electrical
connection.
The hob does not operate and
the indicator lights on the
control panel do not light up.
the hob does not function,
the
information is displayed.
The machine is not connected
to the power source. The
power source or connection is
defective.
The hob is locked
Inspect the electrical cir-
cuit breaker and fuses.
See section on using
the child safety system
The hob has stopped operating
and is beeping every 10 seconds
approximately and a or F7 is
displayed.
A series of small or F7 is
displayed.
There was an overflow or an
object is in contact with the
control panel.
The electronic circuits have
heated.
Clean the hob or remove
the object, then begin
cooking again.
See “Build-in” section.
•Whilst in use
•On switching on
•On first use
YOU OBSERVE THAT: POSSIBLE CAUSES: WHAT YOU SHOULD DO:
YOU OBSERVE THAT: POSSIBLE CAUSES: WHAT YOU SHOULD DO:
