EN
BRAINZ POWER CUBE SPEAKER
INSTRUCTION MANUAL
PLEASE READ THE INSTRUCTIONS CAREFULLY
AND KEEP THEM FOR FUTURE REFERENCE
What you need
• USB-C cable (included)
• Mobile phone with Bluetooth (not included)
How to charge the Powercube Speaker
Connect the supplied USB-C cable to the back of the speaker and connect the USB side to a power source. The
speaker will now charge.
Switching on
Slide the ON/OFF button up on the back of the speaker to turn it on. The speaker will appear under your new
Bluetooth connections on your phone as Brainz Speaker S45. By clicking on it, your phone will connect and the
speaker is ready for use.
Volume
To increase volume, press and hold the + button.
To decrease volume, press and hold the - button.
Next/previous song
To select the next song, press the + button.
To select the previous number, repeat for the button with the - button.
AUX
To use the AUX port, plug one end of your AUX cable into your phone and the other end into the AUX port of the
speaker. Now the speaker will automatically switch to AUX and disable Bluetooth. The AUX port is found on the
back of the speaker.
SD
Thanks to the SD access port, you can play MP3 files. To do this, insert an SD card into the access port. This
access port is also found on the back of the speaker.
Switching off
Slide the ON/OFF button down on the back of the speaker to turn it off.
Please note:
Do not use a charger with a higher voltage than suitable for this product.
Please note:
This product is not dishwasher safe. Clean item with a damp cloth.
This manual is valid for article number 38574.
For more information about this product, please visit www.brainz-electronics.nl
