EN
BRAINZ WAVEBASE SPEAKER
INSTRUCTION MANUAL
PLEASE READ THE INSTRUCTIONS CAREFULLY
AND KEEP THEM FOR FUTURE REFERENCE
What you need
• USB-C cable (included)
• AUX cable (included)
• Mobile phone with Bluetooth (not included)
How to charge the Wavebase speaker
Connect the included USB-C cable to the speaker (flap on the side of the speaker) and connect the USB side to a
power source. The speaker will now charge.
How to set it
Press and hold the button on the side of the speaker with the ' ' icon for 3 seconds to turn the speaker on. The
speaker will appear under your new Bluetooth connections on your phone as Brainz Speaker S95. By clicking on
it, your phone connects and the speaker is ready for use.
Volume
To increase volume, press and hold the + button.
To decrease volume, press and hold the - button.
Next/previous song
To select the next number, press the + button.
To select the previous number, repeat for the button with the - button.
Changing colour
By clicking on the ' ' icon, you can set the colour to your liking. You can choose from 9 different colours.
AUX
To use the AUX port, plug one end of your AUX cable into your phone and the other end into the speaker's AUX
port. Now the speaker will automatically switch to AUX and disable Bluetooth. The AUX port can be found under
the flap on the side of the speaker.
SD
Thanks to the SD access port, you can play MP3 files. To do this, insert an SD card into the access port. This
access port is also found under the flap on the side of the speaker.
Switch off
To turn off the speaker, press and hold the button on the top of the speaker with the ' 'icon for 3 seconds.
Please note:
Do not use a charger with a higher voltage than suitable for this product.
Please note:
This item is not dishwasher safe. Clean with a wet cloth.
These instructions apply to article number 38590.
For more information about this product, please visit www.brainz-electronics.nl
