737224
43
Verklein
Vergroot
Pagina terug
1/52
Pagina verder
Assembly / Owner’s Manual
43
Condition/Problem Things to Check Solution
Unit will not power up/turn on/start Outlet Make sure outlet is functioning correctly. Verify this by plugging another
device (ex: lamp) into the outlet. If outlet is connected to a light switch,
check to make sure it is on. If outlet is not functioning nd a working
outlet.
Power cord not plugged in Make sure the power cord is rmly secured to A/C inlet on the unit and
rmly inserted into a non-GFI wall socket.
Power switch turned off Make sure the power switch at the rear of the unit is in the “ON” posi-
tion. Switch will light up red to indicate power is present.
Safety key not plugged in Plug Safety Key into Console (See Safety Key (Emergency Stop Procedures)
within Features section).
Speed displayed is not accurate Display set to wrong unit of mea-
sure. (English/Metric)
Change display units.
Walking belt misalignment Rear belt guides Belts should ride on top of triangular black belt guides at rear of
treadles.
Tracking adjustment Belts are not required to be perfectly centered and are typically farther
out in the rear than they are in the front. This may vary depending on
user’s stride. If belt is tracking to one side far enough to cause rubbing
of belt, consult the “Adjusting the Walking Belts” procedure.
Speed dependent grinding or
scraping noise
Belt alignment Check walking belt alignment. Belt contact with metal guides under
Treadle can make a loud grinding sound. If belts are misaligned, adjust
walking belt.
Rollers or motor Contact your local Bowex
®
distributor for further assistance.
Hesitation or belt slipping when
walking on unit
Walking belt tension Adjust walking belt tension by following the “Adjusting the Walking Belt”
procedure.
Knocking noises when unit is
operating
Igus bushing If knocking sound seems to be coming directly from the rear roller,
check Igus (yellow “hat” shaped) bushings and replace if cracked.
Hydraulic cylinder bolts Check and tighten both upper and lower bolts that connect the hydraulic
cylinders to the unit.
Belts stop turning while in use Safety key Plug Safety Key into Console (See Safety Key (Emergency Stop Procedures)
in Features section).
Motor overload Unit may be overloaded and drawing too much current, causing unit
to shut power down to protect motor. Consult belt lubrication schedule
to determine if belts need lubrication, check walking belt tension, and
restart unit.
Outlet Outlet may not have enough power available for the machine due to
other devices on same circuit. Remove any devices from power circuit
and restart machine.
Console displays “C”, “S”, or “H”
with a number
Unit needs to be restarted Cycle power off for 10 seconds using power switch at rear of unit, then
restart.
Error code diagnostic Contact your local Bowex
®
distributor for further assistance.
Console displays “LUbE” code Belt lubrication Consult lubrication schedule and apply if necessary. Push START but-
ton.
Troubleshooting
43

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bowflex TC10 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bowflex TC10 in de taal/talen: Engels als bijlage per email.

De handleiding is 11,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info