562446
7
Verklein
Vergroot
Pagina terug
1/113
Pagina verder
7
ENGLISH
a wider stereo effect to provide a sound from
Panorama 2 similar to conventional stereo systems.
When the choice is available, Cinema and Music
decode modes can be selected from the Panorama
2 front panel or from the remote control handset.
4. Panorama 2 setup
Using Panorama 2s default setup is likely to
provide good results in many situations, however its
functionality and performance can be customised
in numerous ways through its Setup Mode better to
suit specic installations or personal preferences.
You may choose to adjust any or all of the setup
parameters.
To switch Panorama 2 into Setup Mode press the
remote handset OSD button. The Panorama 2 Setup
top level menu will be displayed on the connected
television. To Exit from Setup Mode press the Back
button
on the remote handset.
Note: The Panorama 2 Setup Mode on screen
display can be shown in a variety of languages.
See Section 4.4 of this manual for information on
changing the display language.
Note: If no button is pressed for thirty seconds in
Setup Mode Panorama 2 will return automatically
to normal mode.
Select the next menu item up
Select the next menu item down
Input
Select left item
Audio
mode
Select right item
OSD
Select menu item and advance to next
menu level
Mute
(back)
Return to the previous menu
These six handset buttons enable navigation around
the Panorama 2 setup menus and selection of
setup options. There is no need to “save” selected
setup options. Once a menu option is selected, it is
implemented and saved automatically.
Note: Only the six menu navigation buttons are
operational when Panorama 2 is in Setup Mode.
Other handset buttons are non-operational.
The top level Panorama 2 setup menu comprises
four items: SOUND, ROOM SETUP, TUNING
and DEVICE. The setup parameters and options
available beneath each top level menu item are
described in the following sections. Select each
top level menu item in turn using the handset OSD
button
.
4.1 The Sound Menu
The SOUND menu enables adjustment of Panorama
2 BASS and TREBLE, BASS EQ (equalisation),
SUBWOOFER LEVEL and SUBWOOFER
DISTANCE.
Note: The subwoofer menu items will only
be available if a subwoofer is connected to
Panorama 2.
The BASS menu option enables the relative level
of Panorama 2 bass output to be adjusted. Select
BASS and use the Input (
) and Audio Mode ( )
buttons to increase or decrease the level. Return to
the previous menu by pressing the Back button
.
The TREBLE menu option enables the relative level
of Panorama 2 treble output to be adjusted. Select
TREBLE and use the Input (
) and Audio Mode ( )
buttons to increase or decrease the level. Return to
the previous menu by pressing the Back button
.
Note: Bass and treble adjustment is best done
after listening to a variety of programme material.
Set levels that sound natural and comfortable.
Over emphasis of either bass or treble is likely
to become wearing after a while. Final bass
and treble level is best determined following
Panorama 2 BASS EQ and ROOM SETUP
adjustment.
The BASS EQ menu option enables the relative level
of bass output to be congured to take account of
the immediate environment around Panorama 2.
Select BASS EQ and use the Input (
) and Audio
Mode (
) buttons to select WALL if Panorama 2
is wall mounted or TABLE if Panorama 2 is table
mounted. Return to the previous menu by pressing
the Back button
.
The SUBWOOFER LEVEL menu option enables the
relative level of a subwoofer connected to Panorama
2 to be adjusted. Select SUBWOOFER LEVEL
and use the Input (
) and Audio Mode ( ) buttons
to adjust the level. Adjust the subwoofer level after
listening to a variety of different programme material.
Choose a setting that enables the low bass elements
of programme to be heard, but not to dominate.
Return to the previous menu by pressing the Back
button
.
The SUBWOOFER DISTANCE menu option
enables the distance between a subwoofer
connected to Panorama 2 and the listening position
to be specied. Select SUBWOOFER DISTANCE
and use the Input (
) and Audio Mode ( ) buttons to
adjust the distance. Return to the previous menu by
pressing the Back button
.
Note: Specifying the distance between
the subwoofer and the listening position
is important to ensure that bass from the
subwoofer integrates correctly with the sound
from Panorama 2. The distance need not be
measured very accurately plus or minus 0.25m
(1 ft) is ne. Measurement units can be changed
in the DEVICE setup menu.
4.2 The Room Setup Menu
The ROOM SETUP menu enables adjustment of
Panorama 2 VIEWING DISTANCE and OFFSET,
and LEFT WALL and RIGHT WALL reective
character to be specied.
The VIEWING DISTANCE menu option enables
the distance between Panorama 2 and the
listening position to be specied. Select VIEWING
DISTANCE and use the Input (
) and Audio Mode
(
) buttons to adjust the distance. Return to the
previous menu by pressing the Back button
.
The OFFSET menu option enables the distance, left
or right, that the central listening position is offset
from the centre of Panorama 2 to be specied.
Select OFFSET and use the Input (
) and Audio
Mode (
) buttons to set the distance. Return to the
previous menu by pressing the Back button
.
Note: Specifying the offset distance helps ensure
that the timing of surround speaker output from
Panorama 2 is correct. The offset need not be
measured very accurately plus or minus 0.25m
(1 ft) is ne. Measurement units can be changed
in the DEVICE setup menu.
The LEFT WALL and RIGHT WALL menu items
enable the sound reection characteristics of the
walls to either side of Panorama 2 to be specied.
Select LEFT WALL and RIGHT WALL in turn and
use the Input (
) and Audio Mode ( ) buttons to
select from the option soft, medium or hard that
most accurately describes the character of the wall.
Return to the previous menu by pressing the Back
button
.
Note: Panorama 2 generates a surround sound
eld by reecting sound from the side walls of
the room. Specifying the reective character of
the walls helps optimise performance. A typical
“hard” wall would be a large window or solid
brick structure; amediumwall would be a stud
construction or brick wall screened with furniture
items, and asoftwall would be a heavily
curtained window or wall with a fabric hanging.
4.3 The Tuning Menu
The TUNING menu enables adjustment of Panorama
2 GAIN, DELAY and BI-LANGUAGE settings.
The GAIN menu enables adjustment of Panorama
2’s analogue input (Input 5) sensitivity. Select GAIN
and use the Input (
) and Audio Mode ( ) buttons
to adjust the value. Return to the previous menu by
pressing the Back button
.
Note: Input sensitivity adjustment is sometimes
useful to compensate for the low output level of
some analogue source items.
Note: The GAIN menu will only be available if an
analogue input is selected.
The DELAY menu enables adjustment of Panorama
2’s overall audio output delay so that any video lip-
sync errors can be corrected. Delay adjustment only
applies to the currently selected input. For example,
if Input 1 requires delay adjustment it must be
selected before Panorama 2 enters Setup Mode. To
adjust the delay, select DELAY and use the Input (
)
and Audio Mode (
) to adjust the value. Return to
the previous menu by pressing the Back button
.
The BI-LANGUAGE function enables Panorama 2
to reproduce appropriately encoded dual language
programme material. Languages can be selected
individually or reproduced simultaneously. Panorama
2’s ability to create distinct left and right sound
elds makes simultaneous language reproduction
viable. The bi-language function is not available on
Panorama 2's analogue input.
To engage the bi-language function, select BI-
LANGUAGE and use the Input (
) and Audio Mode
(
) buttons to select FIRST language, SECOND
language or MIX (both languages) as required.
Return to the previous menu by pressing the Back
button
.
Note: The BILANG menu will only be available
if bilingual encoded material is detected by
Panorama 2.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Bowers-Wilkins-Panorama-2

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bowers Wilkins Panorama 2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bowers Wilkins Panorama 2 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Zweeds, Noors als bijlage per email.

De handleiding is 14,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info