706252
4
Verklein
Vergroot
Pagina terug
1/81
Pagina verder
4
ENGLISH
Switch On and Off
With all connections made, and the Bowers &
Wilkins Home app installed on your mobile device,
your Formation Duo are ready to be set up.
Formation Duo have no mains power switch and,
following a short start-up routine, will be operational
as soon as they are connected to mains power. They
will play an audio prompt when their startup routine
is complete.
When Formation Duo, that have not been previously
used, are rst switched on they will automatically
enter setup mode to enable their connection to your
home network and to any other available Formation
devices. Setup mode is indicated by a slow amber
pulse illumination of the speaker’s Form buttons
. Formation Duo will also appear in the Bowers
& Wilkins Home app as available for setup, either
on the initial app page, or after selecting ‘Add
Formation product’ from the app Settings page.
Your Formation Duo manage their operational state
and power consumption entirely automatically and
will switch to a power saving mode after twenty
minutes of inactivity. There is no need ever to switch
off your Formation Duo, however should you wish to
do so, simply disconnected them from mains power.
Your Formation Duo will retain their settings without
mains power.
You can restart each Formation Duo by a short
press and release of the reset buttons located on
their rear panels Pressing the button will switch the
Formation Duo off and on again. All settings will be
retained when your Formation Duo restart. You can
also restart your Formation Duo via the Bowers &
Wilkins Home app Settings page. The reset button is
illustrated in Diagram 3.
If you wish to reset your Formation Duo to their
default settings, press and hold each reset button
for ve seconds. On restart, your Formation Duo will
enter setup mode. All settings will be deleted when
your Formation Duo reset. You can also reset your
Formation Duo via the Bowers & Wilkins Home app
Settings menu.
Network Setup
With your Formation Duo in setup mode, with their
Form button
illumination pulsing slowly amber,
launch the Bowers & Wilkins Home app on your
iOS or Android device. The app will guide you with
prompts though the setup process.
Note: Formation Duo employ a Bluetooth
connection to the device running the Bowers
& Wilkins Home app during the setup process.
Bluetooth signals have a relatively short range
and can be interrupted by room boundaries, so
we recommend that your Formation Duo and
Bowers & Wilkins Home app device remain in
close proximity during the setup process.
The Bowers & Wilkins Home app will rst search
for Formation products in setup mode and display
a screen inviting the selection of one. Tap to select
your Formation Duo. If you have already set up a
Formation product and are adding an additional
one, select ‘Add Formation product’ from the app
Settings menu.
Diagram 3
Reset button
The Bowers & Wilkins Home app will next invite
you to name the “space” in which your Formation
Duo are to be used. A list of default space names
is provided but you can also create your own.
When you have selected, or created, a space
name, the app will ask you to touch the Form
button
on the front of one Formation Duo to
conrm the selection.
If a wireless network connection for your
Formation Duo is to be used, the next setup stage
will connect your Formation Duo to your home
WiFi network. The app will ask you to conrm
the correct WiFi network and ask you to input its
password. Alternatively, if your Formation Duo
are connected to your network router using an
Ethernet cable, this stage of the setup process will
be bypassed.
Note: If you already have other Formation
products connected to your WiFi network,
Formation Duo setup will not require you to
input the WiFi password.
With WiFi network conguration, and space
selection complete, your Formation Duo are ready
for use. Your Formation Duo will play an audio
prompt to conrm successful setup.
Bluetooth Setup
You can connect your Formation Duo to a Bluetooth
enabled audio source device, such as a smartphone,
to play audio over Bluetooth. Your Formation Duo
must rst be “paired” with the Bluetooth audio
source device.
Once you have completed the Formation Duo
network setup, open the Bowers & Wilkins Home
app Settings page, and select the Formation Space
that you wish to pair a Bluetooth device with. Next
select ‘+ Pair a new device’ from the Bluetooth
menu and follow the app instructions to complete
pairing. Your Formation Duo will play an audio
prompt when pairing is complete and their Space will
become available to the paired Bluetooth device for
audio playback.
Note: Up to eight Bluetooth devices can be
simultaneously paired with each Formation
space, however devices will not connect and
play to paired spaces automatically.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bowers Wilkins Formation Duo bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bowers Wilkins Formation Duo in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks als bijlage per email.

De handleiding is 8,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info