706253
3
Verklein
Vergroot
Pagina terug
1/65
Pagina verder
3
ENGLISH
1. Formation Bar Carton Contents
Formation Bar
TOSLINK optical digital connection cable
Mains power cable set appropriate for your territory
Wall bracket
Document pack
2. Installing Your Formation Bar
Your Formation Bar requires a mains power supply
to operate so must be located within reach of a
mains socket. If your Formation Bar is to use a wired
connection to your home network it will need to
be located within reach of an appropriate network
(Ethernet) cable.
Your Formation Bar is intended to be positioned
directly below your TV screen and can be placed on
a shelf, table or furniture unit, but can also be wall-
mounted on a dedicated wall bracket.
If you decide to place your Formation Bar on a
shelf, ensure that the shelf is easily able to support
the weight. Furthermore, Formation Bar audio
performance may be diminished if mounting furniture
or shelf panels are imsy or resonant.
Note: If your Formation Bar is to be mounted on a
wall bracket, be sure to install the bracket in line
with its included instructions. If you are unsure of
the suitability of a wall, or of your ability to install
the wall bracket, you should engage specialist
help. Stud-work and plasterboard walls are
unlikely to provide adequate strength or rigidity to
support a Formation Bar and bracket.
Connections
In addition to a mains power socket
your
Formation Bar carries an optical digital audio input
socket
for connection to a TV and an Ethernet
socket
for connection to a router should a wired
network connection be preferred to wireless (WiFi).
Note: The USB socket located on the Formation
Bar rear panel is intended for service and
diagnostic use only. It cannot be used for any
other purpose.
The Formation Bar optical digital audio input is
intended specically for the connection of an optical
digital TV audio output. Use the supplied TOSLINK
cable to connect your TV audio output to the
Formation Bar audio input. The Formation Bar will
automatically switch to its TV audio input when a
signal is present.
Your Formation Bar will automatically identify
and decode Dolby Surround encoded material
and create a surround sound experience. If a
Formation Bass subwoofer is connected in the same
Formation space as your Formation Bar it will switch
automatically to a low frequency effects (LFE) role
when Dolby Surround encoded material is identied.
Once your Formation Bar is set up, you should
switch off your TV internal speakers from the TV
audio settings menu. You may also have to enable
the digital audio output from the TV settings menu.
Switch On and Off
With all connections made, and the Bowers &
Wilkins Home app installed on your mobile device,
your Formation Bar is ready to be set up. Your
Formation Bar has no mains power switch and,
following a short start-up routine, will be operational
as soon as it is connected to mains power. It will
play an audio prompt when its startup routine is
complete.
When a Formation Bar, that has not been previously
used, is rst switched on it will automatically enter
setup mode to enable its connection to your home
network and to any other available Formation
devices. Setup mode is indicated by a slow amber
pulse illumination of the Form touch button
.
The Formation Bar will also appear in the Bowers
& Wilkins Home app as available for setup, either
on the initial app page, or after selecting ‘Add
Formation product’ from the app Settings page.
Your Formation Bar manages its operational state
and power consumption entirely automatically and
will switch to a power saving mode after twenty
minutes of inactivity. There is no need ever to switch
off your Formation Bar, however should you wish
to do so, simply disconnected it from mains power.
Your Formation Bar will retain its settings without
mains power.
You can restart a Formation Bar by a short press
and release of the reset button
located on its rear
panel. Pressing the button will switch the Formation
Bar off and on again. All settings will be retained
when your Formation Bar restarts. You can also
restart your Formation Bar via the Bowers & Wilkins
Home app Settings page.
If you wish to reset your Formation Bar to its default
settings, press and hold the reset button for ve
seconds. On restart, your Formation Bar will enter
setup mode. All settings will be deleted when your
Formation Bar resets. You can also reset your
Formation Bar via the Bowers & Wilkins Home app
Settings menu.
Network Setup
With your Formation Bar in setup mode, with its
Form button
illumination pulsing slowly amber,
launch the Bowers & Wilkins Home app on your
iOS or Android device. The app will guide you with
prompts though the setup process.
Note: Formation Bar employs a Bluetooth
connection to the device running the Bowers
& Wilkins Home app during the setup process.
Bluetooth signals have a relatively short range
and can be interrupted by room boundaries, so
we recommend that your Formation Bar and
Bowers & Wilkins Home app device remain in
close proximity during the setup process.
The Bowers & Wilkins Home app will rst search
for Formation products in setup mode and display
a screen inviting the selection of one. Tap to select
your Formation Bar. If you have already set up a
Formation product and are adding an additional
one, select ‘Add Formation product’ from the app
Settings menu.
The Bowers & Wilkins Home app will next invite
you to name the “space” in which your Formation
Bar is to be used. A list of default space names is
provided but you can also create your own. When
you have selected, or created, a space name,
the app will ask you to touch the Form button
on the top of your Formation Bar to conrm the
selection.
If a wireless network connection for your
Formation Bar is to be used, the next setup stage
will connect your Formation Bar to your home
WiFi network. The app will ask you to conrm
the correct WiFi network and ask you to input
its password. Alternatively, if your Formation Bar
is connected to your network router using an
Ethernet cable, this stage of the setup process will
be bypassed.
Note: If you already have other Formation
products connected to your WiFi network,
Formation Bar setup will not require you to
input the WiFi password.
With WiFi network conguration, and space
selection complete, your Formation Bar is ready
for use. Your Formation Bar will play an audio
prompt to conrm successful setup.
Diagram 1
Formation Bar rear panel
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bowers Wilkins Formation Bar bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bowers Wilkins Formation Bar in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks als bijlage per email.

De handleiding is 8,34 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info