489504
64
Verklein
Vergroot
Pagina terug
1/70
Pagina verder
©2008 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM316801 Rev.02
Owner’s Guide
HOME THEATER SYSTEMS
Lifestyle
®
V-Class
LIFESTYLE
®
V-CLASS
HOME THEATER SYSTEMS
Claudius Covers w_spine_6Lapac.fm Page 1 Tuesday, January 13, 2009 3:56 PM
ii
TAB TAB TAB 6 EnglishTAB English TAB 3TAB 2
Please read this Owner’s Guide
Please take the time to follow the instructions in this guide carefully. It will help you set up and operate your system
properly and enjoy its advanced features. Please save this guide for future reference.
WARNING: To reduce the risk of fire or electrical shock,
do not expose the product to rain or moisture.
WARNING: The apparatus shall not be exposed to drip-
ping or splashing, and objects filled with liquids, such as
vases, shall not be placed on the apparatus. As with any
electronic products, use care not to spill liquids into any
part of the system. Liquids can cause a failure and/or a
fire hazard.
WARNING: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
WARNING: To prevent electric shock, match the wide
blade of the line cord plug to the wide slot of the AC
(mains) receptacle. Insert fully.
The lightning flash with arrowhead symbol within an equilateral triangle alerts
the user to the presence of uninsulated, dangerous voltage within the system
enclosure that may be of sufficient magnitude to constitute a risk of electrical
shock.
The exclamation point within an equilateral triangle, as marked on the system,
is intended to alert the user to the presence of important operating and
maintenance instructions in this owner’s guide.
SAFETY INFORMATION
Claudius.book Page ii Tuesday, January 13, 2009 2:56 PM
iii
EnglishTAB 6ItalianoEnglish TAB TAB 3TAB 5 TAB 2TAB 4
CAUTION: Make no modifications to the system or
accessories. Unauthorized alterations may compromise
safety, regulatory compliance, and system performance.
Class B emissions
This Class B digital apparatus meets all requirements of
the Canadian Interference-Causing Equipment
Regulations (Canada only).
This product conforms to the EMC Directive 2004/108/EC
and to the Low Voltage Directive 2006/95/EC. The remote
control conforms to the RTTE Directive 99/5/EC. The
complete Declaration of Conformity can be found at
www.Bose.com/static/compliance/index.html.
Please dispose of used batteries properly, following
any local regulations. Do not incinerate.
Note: The product label is located on the bottom of the
product.
Note: Where the mains plug or appliance coupler is used
as the disconnect device, such disconnect device shall
remain readily operable.
Note: The product must be used indoors. It is neither
designed nor tested for use outdoors, in recreation vehicles,
or on boats.
Note: This product is intended to be used only with the
power supply provided.
Additional safety information
See the additional instructions on the Important Safety
Instructions sheet (North America only) enclosed in the
shipping carton.
For Your Records
Serial numbers are located on the bottom of the media center and the connection panel of the Acoustimass
®
module.
Serial numbers: Media center:________________________ Acoustimass module:___________________________
Dealer name:__________________________ Dealer phone:_____________________ Purchase date:____________
Bose recommends that you keep your sales slip and a copy of your product registration card together with this guide.
Be sure to fill out your product registration card and mail it to Bose.
Doing so is the only way to ensure that you will receive future software updates by mail.
SAFETY INFORMATION
Claudius.book Page iii Tuesday, January 13, 2009 2:56 PM
iv
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
INSTALLATION ..........................................2
Welcome ..................................................................2
Your system features:........................................... 2
Setup assistance ......................................................2
Setup Guide.......................................................... 2
Setup and Demonstrations DVD........................... 3
This User Guide .................................................... 3
First Power-Up .........................................................4
What to do next .................................................... 4
Tailoring the sound to your room .............................6
Carton inventory .......................................................8
System parts......................................................... 8
Cables and accessories........................................ 9
Placing the media center and display ....................10
Placing the cube speakers .....................................10
Placing the center speaker ................................. 11
Placing the front left and right speakers............. 12
Placing the rear speakers ................................... 12
Placing the Acoustimass
®
module .........................12
Making antenna connections .................................14
FM antenna connection ...................................... 14
AM antenna connection...................................... 14
Cable radio as an option..................................... 14
Installing the TV on/off sensor ...............................15
Using a SCART adapter (Europe only) ...................17
Connecting the audio from your TV .......................18
Using the IR emitter ...............................................20
CONTROLS AND INDICATORS ................... 22
The display .............................................................22
The remote control .................................................22
OPERATION .......................................... 30
Watching TV ...........................................................30
Setting up the Lifestyle remote to
control the TV...................................................... 30
Selecting the TV screen shape ........................... 31
Setting the audio delay compensation ............... 31
Changing the HDMI Image View......................... 31
Controlling a cable or satellite box .........................32
Programming the Bose remote to
turn the cable or satellite box on or off............... 32
Using the remote to change channels................ 33
Changing the HDMI Image View......................... 33
About the HDMI video resolution........................ 33
TABLE OF CONTENTS
Claudius.book Page iv Tuesday, January 13, 2009 2:56 PM
v
TABLE OF CONTENTS
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Controlling DVD playback ..................................... 34
Programming the Lifestyle
®
remote to
control the DVD player....................................... 34
Changing the HDMI Image View........................ 35
About the HDMI video resolution....................... 35
Setting up to view videotapes ............................... 36
Setting up the Bose remote to control the VCR 36
About the HDMI video resolution....................... 37
Setting up an auxiliary (AUX) source ..................... 38
Setting up the Bose
®
remote to control the
AUX device......................................................... 38
About the HDMI video resolution....................... 39
Controlling the (HDMI) Image View ....................... 40
Changing the HDMI video resolution .................... 43
Listening to the radio ............................................. 44
Presets ............................................................... 44
Headphone listening ............................................. 44
Settings Options .................................................... 45
System maintenance ............................................. 50
Replacing the remote control batteries.............. 50
Changing remote control switch settings .......... 50
REFERENCE .......................................... 50
Protecting and caring for your system ............... 52
Cleaning the media center ................................. 53
Setting up a second room with sound .................. 54
Bose
®
link-compatible products make it easy ... 54
Bose
®
link remote switch settings...................... 55
Troubleshooting ..................................................... 56
Contacting Customer Service ............................... 60
GLOSSARY ............................................61
Claudius.book Page v Tuesday, January 13, 2009 2:56 PM
2
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
INSTALLATION
Welcome
Thank you for choosing a Bose
®
Lifestyle
®
V-Class™
home theater system. This elegant and easy-to-use
system delivers superior performance for both music and
video programming.
Your system features:
•HDMI connectivity
The ability to up-convert video
Proprietary ADAPTiQ
®
audio calibration system,
which optimizes system performance to your
listening room
Capability of expanding your system to up to 14
other rooms
Setup assistance
The following information is provided to help you set up
your system:
Setup Guide
If you haven’t already done so, please refer to the fold-out
Setup Guide. It contains all the steps needed to get you
through basic system installation, including:
System placement
Speaker connections
Display/media center interconnections
TV/video connections
Audio connections
System power connections
Claudius.book Page 2 Tuesday, January 13, 2009 2:56 PM
3
INSTALLATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Setup and Demonstrations DVD
The Setup and Demonstrations DVD is a valuable
resource for setup information and content that
demonstrates the capability of your Lifestyle
®
system.
We encourage you to view the DVD immediately after you
set up your Lifestyle
®
system and connect your DVD
player using the Setup Guide. The setup DVD:
Provides instructions for optimizing speaker
placement
Explains the importance of running the ADAPTiQ
®
audio calibration system
Demonstrates the capabilities of your Lifestyle
®
system
This User Guide
This User Guide shows you how to complete your system
setup, and get the most out of your system. The following
information is provided in this user guide:
ADAPTiQ audio calibration system
Shows how to initiate the ADAPTiQ audio calibration
system so that your Lifestyle
®
system can be
calibrated to produce the best sound possible in your
listening space.
Speaker placement
Diagrams and explains how to place your speakers to
get the best possible sound.
Antenna connections
Illustrates how to connect the AM and FM antennas.
TV sensor setup
Shows how to enable the TV to turn on when a video
source (DVD, VCR, etc.) is selected.
TV audio out connections
Explains how to connect audio from your TV so that
you can hear audio from camcorders, game
consoles, etc.
Display and remote control buttons
Details the functions of buttons on the display and
remote control.
Remote control setup
Shows how to set up the remote to control devices.
Claudius.book Page 3 Tuesday, January 13, 2009 2:56 PM
4
INSTALLATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
First Power-Up
After you connect your Lifestyle
®
system to your TV and
DVD player using the Setup Guide, you are ready to apply
power.
1. Turn on the TV and Lifestyle
®
system.
The first time you apply power to your Lifestyle
®
sys-
tem, you are guided through a sequence of menus.
The first menu displayed on the TV (see Figure 1)
directs you to choose the system language.
Figure 1 Lifestyle
®
language menu.
2. Select a language by pressing the corresponding
numeric key on the remote control.
The Setup menu appears as shown in Figure 2.
Figure 2 System menu Setup tab.
Claudius.book Page 4 Tuesday, January 13, 2009 2:56 PM
5
INSTALLATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
What to do next
The first time the System menu Setup tab displays, you
can take one of the following actions:
If you are confident that your speakers are correctly
wired and placed, and that you can understand and
navigate the Setup menu, continue using it. See
“Operation” beginning on page 30 for more infor-
mation on using the Setup menu.
If you would rather be guided through the setup
process by the Bose
®
Setup and Demonstrations
DVD, do the following:
1.Exit the System menu by pressing on the
Lifestyle
®
remote.
2.Select the DVD player by pressing on the
Lifestyle
®
remote.
3.Turn your DVD player on and insert the Bose
®
Setup and Demonstrations DVD.
The Setup and Demonstrations DVD should begin
playing. If not, press the PLAY button on the DVD
remote control. Follow the instructions on the DVD.
When you are finished with the Setup and Demon-
strations DVD, see “Operation” beginning on
page 30 for more information on using the Setup
menu.
Claudius.book Page 5 Tuesday, January 13, 2009 2:56 PM
6
INSTALLATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Tailoring the sound to your room
The ADAPTiQ
®
audio calibration system ensures that your
Lifestyle
®
system sounds great. Completing the ADAPTiQ
audio calibration system process is the final step of a
basic Lifestyle
®
setup.
If you have already completed the ADAPTiQ audio
calibration system process using the Bose
®
Setup and
Demonstrations DVD please go on to the next section,
“Carton inventory” on page 8.
A special headset, pictured in Figure 3, can be found in
the Essentials kit. The headset, designed to be worn
above your ears, contains two miniature microphones that
take acoustic measurements during calibration.
You will achieve the best results when the listening room
is relatively quiet. Please notify other members of your
household that they will hear a series of audio tones.
On the connection panel of the media center (shown in
Figure 3), plug the ADAPTiQ headset into the AUX
AUDIO IN connectors.
Figure 3 ADAPTiQ headset connection.
Claudius.book Page 6 Tuesday, January 13, 2009 2:56 PM
7
INSTALLATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
If you are applying power to your Lifestyle
®
system for the
first time, see “First Power-Up” on page 4.
To run the ADAPTiQ
®
audio calibration system process,
complete the following steps:
1. In the System menu Setup tab (see Figure 4), move to
the ADAPTiQ item by pressing the down arrow.
Figure 4 System menu Setup tab
2. Press the right arrow to select Run.
3. To begin the ADAPTiQ audio calibration process,
press (Enter).
4. Follow the on-screen directions to complete the
process.
Claudius.book Page 7 Tuesday, January 13, 2009 2:56 PM
8
INSTALLATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Carton inventory
Now that you have unpacked your system, please save all
of the packing materials, which provide the safest means
for shipping or transporting.
Note: Now is a good time to locate the serial numbers for your
system, on the bottom of the media center and near the con-
nection panel on the Acoustimass
®
module. For future refer-
ence, we suggest that you copy those numbers onto the For
Your Records form on page iii.
System parts
Verify that your system includes the following parts shown
in Figure 5.
Figure 5 System parts
Media center Display Acoustimass
®
module Rubber feet for
Acoustimass
®
module
Power Supply Jewel Cube
®
speakesr (4)
(Lifestyle
®
V30)
Direct/Reflecting
®
cube speakers (4)
(Lifestyle
®
V20)
Single Cube speaker (5)
(Lifestyle
®
V10)
AC Power (2) Center channel speaker (1)
(Lifestyle
®
V30)
Center channel speaker (1)
(Lifestyle
®
V20)
Rubber feet for speakers
Claudius.book Page 8 Tuesday, January 13, 2009 2:56 PM
9
INSTALLATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Cables and accessories
Verify that the items in Figure 6 are supplied. Cables
needed to get your system operational are included.
Accessories such as antennas, SCART connector
(Europe only), and TV sensor are also included. You may
need to acquire other cables or accessories to complete
your unique home theater setup as preferred.
Figure 6 Cables and accessories
Remote control and
batteries
ADAPTiQ
®
audio calibration
system
Setup and
Demonstrations DVD
TV sensor SCART video connector
(Europe only)
FM dipole antenna AM loop antenna RCA analog audio Optical digital audio HDMI digital audio/video
Left front speaker Center front speaker Right front speaker Composite video Component video
Left rear speaker Right rear speaker Acoustimass
®
module
to media center
IR emitter extender IR emitter
Claudius.book Page 9 Tuesday, January 13, 2009 2:56 PM
10
INSTALLATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Placing the media center and display
The media center can be placed out of sight behind all of
your other A/V components. When placing the media
center, ensure that it is close enough to other sources (TV,
DVD, VCR, cable or satellite box) to allow for easy cable
connections. Check the length of the audio and video
cables you will use for these additional components.
CAUTION:
Do not block the ventilation openings on either
side of the media center. Allow at least two inches on each side.
Place the display module so it is facing out into the room,
toward the front of the surface on which it rests, as shown
in Figure 7. Allow about two inches of clearance on either
side of the display module. Make sure you can clearly see
the display module from your listening position.
Bose offers a variety of speaker mounting accessories,
including rubber feet, stands, and wall brackets. For more
information, or to purchase accessories, contact your
local Bose
®
dealer or visit www.Bose.com. To contact
Bose directly, refer to the address list provided in the
carton.
Rotate the top cube of each speaker array toward the wall
or another hard surface to create reflected sound.
Figure 7 Typical placement of the Lifestyle
®
display module
Display module
Claudius.book Page 10 Tuesday, January 13, 2009 2:56 PM
11
INSTALLATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Placing the cube speakers
When you place your speakers approximately as shown in
Figure 8 on page 11, they provide the audio atmosphere
of a home theater. You can experiment with speaker
placement and orientation to produce the most pleasing
sound.
CAUTION:
Select a stable and level surface for all speakers.
Vibration can cause speakers to move, particularly on smooth
surfaces such as marble, glass, or highly polished wood. To
reduce the possibility of movement, Bose recommends that you
attach the included rubber speaker feet to the bottom of the
speakers.
Note: If, after running the ADAPTiQ
®
audio calibration
system, you move one or more speakers to a substan-
tially different location, you should re-run the ADAPTiQ
®
audio calibration system.
Figure 8 Approximate speaker locations
Rotate the top cube toward a wall or
other hard surface.
Claudius.book Page 11 Tuesday, January 13, 2009 2:56 PM
12
INSTALLATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Placing the center speaker
Place the center speaker directly above or below the
vertical center of the TV screen or as close to that as
possible (see Figure 8).
If you are placing the center speaker directly on the
top of your TV, first attach the supplied rubber feet to
the bottom surface of the speaker.
Make sure the 20-foot (6.1-meter) speaker cable can
reach from the center speaker to the Acoustimass
®
module.
Placing the front left and right speakers
Set or mount the front left and right speakers upright
and lined up with the horizontal center of the TV
screen.
We recommend a maximum distance of 3 feet
(1 meter) from the edge of your TV screen for
best results.
Make sure each 20-foot (6.1-meter) speaker
cable can reach from the speaker to the
Acoustimass module.
Placing the rear speakers
Position the rear left and right speakers in the back
half of your room.
Make sure each 50-foot (15.2-meter) speaker
cable can reach from the speaker to the
Acoustimass module.
Place the speakers at ear height or higher if possible.
Direct the sound away from the listening positions to
maximize the reflected sound.
Claudius.book Page 12 Tuesday, January 13, 2009 2:56 PM
13
INSTALLATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Placing the Acoustimass
®
module
Attach the four self-adhesive rubber feet to the surface
that touches the floor (either of its two sides, its top,
or bottom).
Place the Acoustimass
®
module:
At the same end of the room as the front speakers.
At least 18 inches (45 centimeters) from the TV to
avoid magnetic interference with the TV image.
With the front end facing into the room.
Within reach of the audio input cable, the five speaker
cables, and your AC power (mains) outlet.
Under a table or behind a cabinet, but not where
furniture or drapes block any openings on the
module.
On its two sides, its top, or bottom (Figure 9).
Do NOT place the Acoustimass module:
On its back end or front end (Figure 9).
Where the ventilation slots for the built-in electronic
circuitry are blocked.
Where it will expose electronic media, such as tapes,
to its magnetic field for long periods.
Where the front end is facing a wall.
Figure 9 Proper and improper Acoustimass module positioning
BEST
For best ventilation, stand the
module on its bottom
surface,
ALTERNATE
Place the module on one
of its two broad
sides.
Top surface
Side surface
DO NOT
stand the module on its
slightly curved back end,
which can cause it to tip
DO NOT
stand the module on its front
grille end. The weight of
the module can damage
the grille.
Back end
Front end
Ventilation
openings
Claudius.book Page 13 Tuesday, January 13, 2009 2:56 PM
14
INSTALLATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Making antenna connections
The supplied AM and FM antennas connect to the rear
panel of the media center (Figure 10).
Note: The FM connector may be used with an
outdoor antenna. Before doing this, consult a qualified
installer. Follow all safety instructions supplied with
the antenna.
Figure 10 Connections for the AM and FM antennas
FM antenna connection
1. Plug the connector on the FM dipole antenna lead
into the FM antenna jack.
2. Spread out the antenna arms and change their
orientation as needed to get the best FM reception.
3. Keep the antenna as far as possible from the media
center, display, and Acoustimass
®
module.
AM antenna connection
1. Plug the connector on the AM loop antenna lead
into the AM antenna jack.
2. Stand the AM antenna on the base or mount the
antenna on a wall, following the instructions
enclosed with the AM antenna.
3. Keep the antenna as far as possible (at least 20
inches or 50 centimeters) from the media center
and display module, and at least 2 feet (60
centimeters) from the Acoustimass module.
Note: AM reception can be adversely affected by a
nearby television when it is on. Turn off the TV for best AM
reception.
Cable radio as an option
Some cable TV providers make FM radio signals available
through the cable service to your home. This cable
connects to the FM antenna jack on the back panel of the
media center.
For instructions on how to make this connection, contact
your cable TV provider.
Claudius.book Page 14 Tuesday, January 13, 2009 2:56 PM
15
INSTALLATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Installing the TV on/off sensor
The TV on/off sensor enables the system to automatically
turn on the TV when another video source (DVD, cable/
satellite box, etc.) is selected. If you choose not to use the
sensor, you must turn on your TV separately.
For a larger TV, you may want a second person to help as
you follow the steps below:
Note: Front projectors with a separate screen may not
work with the sensor.
1. Plug the sensor cord connector into the media
center TV Sensor connector.
If you are using a SCART adapter, plug the sensor
directly into the pass-through connector provided
on the adapter (Figure 12 on page 17).
2. Temporarily position the TV on/off sensor on the
back of your TV (Figure 11).
Note: DO NOT attach the supplied mounting pad until
you have tested and activated the automatic feature as
explained below.
Figure 11 TV on/off sensor positioned on the TV
Media center
TV sensor
Claudius.book Page 15 Tuesday, January 13, 2009 2:56 PM
16
INSTALLATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
3. Using the remote control that came with your TV,
turn on your TV.
4. Using the Lifestyle
®
remote control, press System.
5. To move right to the Setup menu, press the
right arrow then press ENTER.
6. Move down to TV Power
by pressing the down
arrow, then press ENTER.
7. Move up or down to select the proper TV Power
option to detect the TV sensor:
Automatic (for TV models that do not use a
European-style SCART connector).
Euro Connector (for TV models that use a
European-style SCART connector).
8. Press ENTER.
Below the highlighted TV Power
item is TV Power
Status. The value for this item changes from Not
Detected to TV On, when the sensor is properly
positioned.
Note: It may be helpful to get an assistant for the next
step and have one person view the screen, while the
other moves the sensor.
9. Hold the sensor against the rear of the TV and
slowly move it around until TV Power Status
changes from Not Detected to TV On.
10. When the TV Power Status indicates TV On,
press Exit to exit the System menu.
This completes sensor activation.
Claudius.book Page 16 Tuesday, January 13, 2009 2:56 PM
17
INSTALLATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Using a SCART adapter (Europe only)
The SCART adapter plugs into the media center using five connectors as show below.
Figure 12 SCART composite video connections
Claudius.book Page 17 Tuesday, January 13, 2009 2:56 PM
18
INSTALLATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Connecting the audio from your TV
You may want to connect a source component, such as a
camcorder or game console, directly to your TV. To play
the audio from that source through your Lifestyle
®
system,
you must connect the audio coming out of the TV to the
Lifestyle
®
system.
If your TV does not have an audio output, you can still
hear the sound of a connected component through the
speakers built into the TV. However, at any other time, it is
best to keep the volume of your TV turned all the way
down for a better surround sound experience.
To connect your TV audio to the Lifestyle
®
system:
For a basic analog audio connection, use the
supplied stereo audio cable (with two RCA
connectors at each end, one red and one white). It
connects to left (L) and right (R) audio outputs on the
rear panel of your TV and to the (L and R) TV Audio IN
jacks on the media center rear panel (see Figure 13).
If your TV provides a digital audio out connector,
connect a digital audio cable. When making the
digital audio connection, use either a single coaxial
cable or an optical cable.
Do not disconnect the analog connection described
above. The analog connection ensures consistent
sound in the event of a weak digital signal.
If your TV provides both fixed (FIX) and variable (VAR)
audio output jacks, use the fixed jacks for higher quality.
Be sure to select Fixed in your TV setup menu.
Claudius.book Page 18 Tuesday, January 13, 2009 2:56 PM
19
INSTALLATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Figure 13 Audio connection between the TV and media center
Claudius.book Page 19 Tuesday, January 13, 2009 2:56 PM
20
INSTALLATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Using the IR emitter
IR emitters enable the system to control source devices
even if they are in a cabinet, on multiple shelves, or hidden
away. You should place an IR emitter on every device that
you want to control using the Lifestyle
®
remote.
To use an IR emitter with one device
1. Plug the IR emitter cord connector into the
Lifestyle
®
media center IR emitter connector.
2. Place the emitter so that the flat side is against the
front panel of the source device.
3. Using the supplied adhesive pad, attach the
emitter to the device.
Figure 14 IR emitters positioned on device front panel
Claudius.book Page 20 Tuesday, January 13, 2009 2:56 PM
21
INSTALLATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
To use IR emitters with two or more devices
1. Plug the IR emitter extender connector into the
Lifestyle
®
media center.
2. Plug the IR emitter cord connector (or additional
extenders) into the IR emitter extender.
3. Place each emitter so that the flat side is against
the front panel of each device.
4. Using the supplied adhesive pads, attach the
emitters to the devices.
Note: You can use up to four IR emitters with the system.
If you need additional IR emitter extenders, contact Bose
®
Customer Service. Refer to the address sheet included in
the carton.
Figure 15 IR emitters positioned on device front panel
Claudius.book Page 21 Tuesday, January 13, 2009 2:56 PM
22
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
CONTROLS AND INDICATORS
The display
The display shows system messages. This includes
program details, the current source that is playing, and
any selected option.
Figure 16 Lifestyle
®
system display
The buttons on the top of the display control the basic
Lifestyle
®
system functions.
Turns the power on or off. When Bose
®
link is
enabled, pressing and holding turns off all
zones. (See “Setting up a second room with
sound” on page 53.)
Steps through the available source selections.
Silences the speakers in the main room.
When Bose
®
link is enabled, pressing and
holding silences the speakers in all rooms.
(See “Setting up a second room with sound
on page 53.)
Decreases the audio volume from the
speakers.
Increases the audio volume from the
speakers.
On/Off
Source
Mute
Vol -
Vol +
Claudius.book Page 22 Tuesday, January 13, 2009 2:56 PM
23
CONTROLS AND INDICATORS
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
The remote control
The advanced radio frequency remote control works
from almost anywhere in your home. There is no need
to aim the remote at the display.
In addition to controlling your Lifestyle
®
system, the
remote can be programmed to control each source
device connected to your system.
The function of each remote control button is explained
on the following pages. Then, remote control program-
ming is covered according to the activity as follows:
“Watching TV” on page 30
“Controlling a cable or satellite box” on page 32
“Controlling DVD playback” on page 34
“Setting up to view videotapes” on page 36
“Setting up an auxiliary (AUX) source” on page 38
“Listening to the radio” on page 44
Figure 17 Lifestyle
®
system remote control
Claudius.book Page 23 Tuesday, January 13, 2009 2:56 PM
24
CONTROLS AND INDICATORS
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Remote control button descriptions are arranged by
general function on the following pages. Some buttons
may not be physically grouped together. Refer to your
remote control while reading the following button
descriptions.
Before many of the buttons can function properly, your
Lifestyle
®
system remote must be set up to control the
associated source. See “Operation” beginning on
page 30.
Note: A source is any device, such as a DVD player,
that outputs video and/or audio and can connect to
your Lifestyle
®
system.
Power and source selection buttons
On/Off
– Turns the Lifestyle
®
system on
and off, selecting the last used source at
turn-on. When Bose
®
link is enabled,
pressing and holding turns off all zones.
(See “Setting up a second room with
sound” on page 53.)
TV – Turns your Lifestyle
®
system on if it
was off. Selects the TV as the source.
On/Off Turns the TV on and off.
Input Selects different video
connectors on the TV.
Mute – Mutes or unmutes the volume.
When Bose
®
link is enabled, pressing and
holding silences the speakers in all rooms.
(See “Setting up a second room with
sound” on page 53.)
CBL-SAT – Selects the source device
plugged into the CBL-SAT connectors.
Turns your Lifestyle
®
system on if it was
off.
On/Off – Turns your cable or satellite
box on and off.
Claudius.book Page 24 Tuesday, January 13, 2009 2:56 PM
25
CONTROLS AND INDICATORS
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Menu and navigation buttons
DVD – Selects the source device
plugged into the DVD connectors. Turns
your Lifestyle
®
system on if it was off.
On/Off – Turns the DVD on and off.
AUX – Selects the source device
plugged into the AUX connectors. Turns
your Lifestyle
®
system on if it was off.
On/Off – Turns the AUX device on and
off.
VCR – Selects the source device
plugged into the VCR connectors. Turns
your Lifestyle
®
system on if it was off.
On/Off – Turns the VCR on and off.
FM – Selects the built-in FM radio tuner,
set to the station last selected. Turns your
Lifestyle
®
system on if it was off.
AM – Selects the built-in AM radio tuner set
to the station last selected. Turns your
Lifestyle
®
system on if it was off.
Settings – Enters or exits the
Settings menu for the current source.
Info – Displays or exits the TV, cable,
satellite box, or VCR/DVR information
on the TV screen (when your TV,
cable or satellite box, or VCR/DVR
provides this feature).
System – Enters or exits the System
main menu.
Menu – Displays the options menu
for the current source (when your TV,
cable or satellite box, or VCR/DVR
provides this feature).
Exit
Exits the Settings and System
menus.
Exits on-screen menus for TV,
cable, satellite box, or VCR/DVR
(when your TV, cable or satellite
box, or VCR/DVR provides this
feature).
Claudius.book Page 25 Tuesday, January 13, 2009 2:56 PM
26
CONTROLS AND INDICATORS
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Tune Up/Down
Tune the FM/AM radio up or
down to the next frequency.
Select the next or previous
item in a menu list.
Enter – Confirm the selection
of a menu item.
Arrow Keys – Move up, down,
left, or right in a menu or
screen.
Guide – Displays an electronic
program guide (when your TV, cable,
satellite box or VCR/DVR provides
this feature).
Page Up/Down – Commands the
TV, Cable, or Satellite box to move up
or down a page in an on-screen
guide.
Volume – Raises or lowers the
volume.
Pressing + raises the volume and
unmutes the system (if muted).
Pressing
lowers the volume.
Channel/Track – Skips backward
or forward to the next TV, cable, or
satellite channel, CD track, or DVD
chapter.
Claudius.book Page 26 Tuesday, January 13, 2009 2:56 PM
27
CONTROLS AND INDICATORS
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Play mode and numeric buttons
Stop
Stops music (except FM/AM) or video
play.
For DVDs and VCDs only, the system
inserts a bookmark where the disc
stopped (if your player supports this
feature), so you can resume play from
that point. Pressing again clears the
bookmark.
Pause – Pauses music (except FM/AM)
or video play.
Play – Starts music (except FM/AM) or
video play.
Scan
Moves backward or forward in
video. Displays a control bar to
adjust the speed of this
movement.
Moves to the previous or next
CD track or strong radio station.
When pressed and held, scans
backward or forward through the
current CD or MP3 disc.
Repeat
Repeats the current music selection
from a CD. Pressing again cancels
repeat.
Moves ahead a few seconds on your
DVR.
Claudius.book Page 27 Tuesday, January 13, 2009 2:56 PM
28
CONTROLS AND INDICATORS
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Picture settings buttons
Record
Activates recording on a recording
device.
Shuffle
Randomly plays music from a CD.
Pressing again cancels repeat.
Moves back a few seconds on your
DVR.
Numeric Keys – Select the radio
station preset, DVD chapter, CD
track, or TV channel that
corresponds to the numbers
pressed.
Previous – Skips to the channel last
selected on TV, cable, satellite box, VCR,
or DVR (if applicable).
Image View– Allows you to specify how you
want certain display formats from your
Lifestyle
®
system to appear on your HDTV
screen.
(Not available on European systems)
Picture-in-picture – Activates the picture-
in-picture feature of your TV (if your TV
includes this feature).
Claudius.book Page 28 Tuesday, January 13, 2009 2:56 PM
29
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Special function buttons
Teletext mode buttons (Europe only)
List – Brings up a list of recorded shows on a
DVR (if applicable).
Selects the option labeled A.
Selects the option labeled B.
Selects the option labeled C.
Displays a list of favorite channels (if your TV
includes this feature).
Teletext – Enters or exits the Teletext mode
when the TV is selected as the source. Works
in conjunction with the four colored buttons.
RedIn Teletext mode, selects the
content labeled red.
GreenIn Teletext mode, selects
the screen content labeled green.
YellowIn Teletext mode, selects
the screen content labeled yellow.
BlueIn Teletext mode, selects the
screen content labeled blue.
SETUP
Claudius.book Page 29 Tuesday, January 13, 2009 2:56 PM
30
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
OPERATION
Watching TV
Your Lifestyle
®
system works with many different types
of TVs, from standard definition to Digital High-
Definition TV (HDTV). This section shows you how to
set up your Lifestyle
®
system remote control to work
with your particular brand of TV, then configure the
sensor so your TV automatically turns on when you
press the On/Off button on the remote.
Setting up the Lifestyle
®
remote to control
the TV
Before you can control the TV, you must first select the
correct TV code by following the steps below.
1. Turn on the TV.
2. On the Lifestyle
®
remote, press TV. (See “The
remote control” on page 23 for information on
operating the remote.)
3. To display the Lifestyle
®
system menu on the TV,
press System.
The message “SYSTEM: SEE TV” should appear
on the Lifestyle
®
system display module.
Use the remote supplied with the TV to select the
video input that allows you to see the Lifestyle
®
system menu.
4. To select the Setup tab, move right and select ,
then press ENTER.
5. Move down to TV Brand and press ENTER.
6. Select the brand of your TV from the list and press
ENTER.
7. Move down to TV Code and press ENTER.
8. Select the first TV code in the list.
9. Press the (TV) On/Off button (located under the TV
button).
If the TV turns off, you have chosen the
correct code.
If the TV does not turn off, select the next code
and press (TV) On/Off again.
Continue selecting codes until you find one
that works.
10. When you have a working code, enter it below, then
press ENTER.
TV Code: ____________________
11. To exit the system menu, press Exit.
Claudius.book Page 30 Tuesday, January 13, 2009 2:56 PM
31
OPERATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Selecting the TV screen shape
The shape of your TV screen is either Normal or
Widescreen (Figure 1). The Lifestyle
®
system is initially
set to display an image on a widescreen-shaped TV. If
your TV is the normal shape, you should adjust the
Lifestyle
®
system setting from widescreen to normal.
Figure 1 TV screen shapes
1. Display the Lifestyle
®
system menu on the TV by
pressing System.
2. To select the Setup tab, move right and select ,
then press ENTER.
3. Move down to Widescreen TV and press ENTER.
4. To indicate that you have a normal TV, select No
and press ENTER.
5. To exit the System menu, press Exit.
Setting the audio delay compensation
You may notice that the audio is delayed relative to the
video. For example, a persons lips move but there is a
noticeable delay until you hear the voice. You can use
the Audio Delay setting to correct this condition.
To change the audio delay:
1. Use the Lifestyle
®
remote to display the Settings
menu on the display module or TV by pressing
Settings.
2. Move down and select , then press ENTER.
3. Select a value by moving up or down the list, then
press ENTER.
The initial setting is 2 (to compensate for the
Lifestyle
®
system internal delay). Each value (1-8)
adds 30 milliseconds of delay.
4. To exit the Settings menu, press Exit.
Note: Under most listening conditions, you should keep
the volume on your TV set turned all the way down.
Changing the HDMI Image View
You can specify how certain display formats appear on
your HDTV screen. You control these formats (that are
output from your Lifestyle
®
system) by pressing the
Image View button on the remote. See “Controlling the
(HDMI) Image View” on page 40 and “Settings Options”
on page 45 for information and illustrations on changing
the HDMI Image View.
Normal
Widescreen
Claudius.book Page 31 Tuesday, January 13, 2009 2:56 PM
32
OPERATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Controlling a cable or satellite box
Once your cable or satellite box is connected to your
Lifestyle
®
system, you can set up the remote as the
single point of control for your subscription service.
Programming the Bose
®
remote to control
the cable or satellite box
Setting up the remote to control the cable or satellite
box involves selecting the correct cable or satellite box
code.
1. Turn on the TV.
On the TV, select the video input that is connected
to the Lifestyle
®
system.
2. Turn on the cable or satellite box.
3. To display the Lifestyle
®
system menu on the TV,
press System. (See “The remote control” on
page 23 for information on operating the remote.)
4. To select the Setup tab, move right and select ,
then press ENTER.
5. Move down to CBL
SAT Device and press
ENTER.
6. Select the correct device type from the list and
press ENTER.
If you are unsure of the device type, see the
owner’s manual for that device.
7. Move down to CBL
SAT Brand and press ENTER.
8. Select the brand of your device from the list and
press ENTER.
9. Move down to CBL
SAT Code and press ENTER.
10. Select the first code in the list.
11. On the Lifestyle
®
remote, press the (CBL-SAT)
On/Off button, located under the CBL-SAT button.
If the device turns off, you have chosen the
correct code.
If the device does not turn off, select the next
code and press (CBL-SAT) On/Off again.
Continue selecting codes until you find one
that works.
12. When you have a working code, enter it below, then
press ENTER.
CBL-SAT Code: ____________________
13. To exit the system menu, press Exit.
Claudius.book Page 32 Tuesday, January 13, 2009 2:56 PM
33
OPERATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Using the remote to change channels
If you want the remote to change the channels on your
cable or satellite box when you are watching TV:
1. To display the Lifestyle
®
system menu on the TV,
press System.
2. Move down to TV Control and press ENTER.
3. Select CBL
SAT and press ENTER.
Setting TV Control to CBL-SAT configures the
remote to control both the TV and cable or satellite
box when the source is TV.
4. To exit the system menu, press Exit.
You now can use your Lifestyle
®
remote to control your
cable or satellite box.
Changing the HDMI Image View
You can specify how certain display formats appear on
your HDTV screen. You control these formats (that are
output from your Lifestyle
®
system) by pressing the
Image View button on the remote. See “Controlling the
(HDMI) Image View” on page 40 and “Settings Options”
on page 45 for information and illustrations on changing
the HDMI Image View.
About the HDMI video resolution
When your Lifestyle
®
system is connected to an HDTV
using the HDMI connector, the video is transmitted at
the prefered resolution of the television. Occasionally,
you may want to specify a lower resolution, even
though your HDTV can display a higher resolution. For
example, a certain source signal may be unpleasant to
your eye when converted by the Lifestyle
®
system to a
much higher resolution. In that case, you can change to
a lower resolution. See “Changing the HDMI video
resolution” on page 43 for information on changing the
HDMI video resolution.
Claudius.book Page 33 Tuesday, January 13, 2009 2:56 PM
34
OPERATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Controlling DVD playback
Once your DVD player is connected to the Lifestyle
®
system, you can set up the Lifestyle
®
remote control to
control the DVD player.
Programming the Lifestyle
®
remote to con-
trol the DVD player
Setting up the remote to control the DVD player
involves selecting the correct DVD code, then setting
the DVD to turn on automatically when your Lifestyle
®
system is turned on.
1. Turn on the TV.
On the TV, select the video input that is connected
to the Lifestyle
®
system.
2. Turn the DVD player on.
3. On the Lifestyle
®
remote, press DVD. (See “The
remote control” on page 23 for information on
operating the remote.)
4. To display the Lifestyle
®
system menu on the TV,
press System.
5. To display the Setup menu, select , then press
ENTER.
6. Move down to DVD Device and press ENTER.
7. Move up or down to select the type of device from
the list and press ENTER.
8. Move down to DVD Brand and press ENTER.
9. Select the brand of your device and press ENTER.
10. Move down to DVD Code and press ENTER.
11. Select the first device code in the list.
12. On the Lifestyle
®
remote, press the (DVD)
On/Off button, located under the DVD button.
If the DVD turns off, you have chosen the correct
code.
If the DVD does not turn off, select the next
code and press DVD On/Off again.
Continue selecting codes until you find one
that works.
13. When you have a working code, enter it below, then
press ENTER.
DVD Code: ____________________
14. To exit the system menu, press Exit.
Claudius.book Page 34 Tuesday, January 13, 2009 2:56 PM
35
OPERATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Changing the HDMI Image View
You can specify how certain display formats appear on
your HDTV screen. You control these formats (that are
output from your Lifestyle
®
system) by pressing the
Image View button on the remote. See “Controlling the
(HDMI) Image View” on page 40 and “Settings Options”
on page 45 for information and illustrations on changing
the HDMI Image View.
About the HDMI video resolution
When your Lifestyle
®
system is connected to an HDTV
using the HDMI connector, the video is transmitted at
the prefered resolution of the television. Occasionally,
you may want to specify a lower resolution, even
though your HDTV can display a higher resolution. For
example, a certain source signal may be unpleasant to
your eye when converted by the Lifestyle
®
system to a
much higher resolution. In that case, you can change to
a lower resolution. See “Changing the HDMI video
resolution” on page 43 for information on changing the
HDMI video resolution.
Claudius.book Page 35 Tuesday, January 13, 2009 2:56 PM
36
OPERATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Setting up to view videotapes
Once your VCR is connected to your Lifestyle
®
system,
you can set up the remote to control the VCR and start
watching videotapes.
Programming the Bose
®
remote to control
the VCR
Setting up the remote to control the VCR involves
selecting the correct VCR code, then setting the VCR to
turn on automatically when your Lifestyle
®
system is
turned on.
1. Turn on the TV.
On the TV, select the video input that is connected
to the Lifestyle
®
system.
2. Turn on the VCR.
3. On the Lifestyle
®
remote, press VCR. (See “The
remote control” on page 23 for information on
operating the remote.)
4. Press System to make the system menu appear
on the TV.
5. To display the Setup menu, select , then
press ENTER.
6. Move down to VCR Device and press ENTER.
7. Select the type of device from the list and
press ENTER.
8. Move down to VCR Brand and press ENTER.
9. Select the brand of your device and press ENTER.
10. Move down to VCR Code and press ENTER.
11. Select the first device code in the list.
12. Press the (VCR) On/Off button (located under the
VCR button).
If the VCR turns off, you have chosen the correct
code.
If the VCR does not turn off, select the next
device code and press VCR On/Off again.
Continue selecting codes until you find one
that works.
13. When you have a working code, enter it below, then
press ENTER.
VCR Code: ____________________
14. To exit the system menu, press Exit.
You can now use the Lifestyle
®
remote to control your
VCR.
Claudius.book Page 36 Tuesday, January 13, 2009 2:56 PM
37
OPERATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Changing the HDMI Image View
You can specify how certain display formats appear on
your HDTV screen. You control these formats (that are
output from your Lifestyle
®
system) by pressing the
Image View button on the remote. See “Controlling the
(HDMI) Image View” on page 40 and “Settings Options”
on page 45 for information and illustrations on changing
the HDMI Image View.
About the HDMI video resolution
When your Lifestyle
®
system is connected to an HDTV
using the HDMI connector, the video is transmitted at
the prefered resolution of the television. Occasionally,
you may want to specify a lower resolution, even
though your HDTV can display a higher resolution. For
example, a certain source signal may be unpleasant to
your eye when converted by the Lifestyle
®
system to a
much higher resolution. In that case, you can change to
a lower resolution. See “Changing the HDMI video
resolution” on page 43 for information on changing the
HDMI video resolution.
Claudius.book Page 37 Tuesday, January 13, 2009 2:56 PM
38
OPERATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Setting up an auxiliary (AUX) source
Once your AUX source device is connected to the
Lifestyle
®
system, you can set up the remote to control
that source. Then, when you are watching video from
that source, the Lifestyle
®
remote should control most
of the functions of that source.
Programming the Bose
®
remote to control
the AUX device
Setting up the remote to control the AUX device
involves selecting the correct AUX device code, then
setting the AUX device to turn on automatically when
the Lifestyle
®
system is turned on.
1. Turn on the TV.
On the TV, select the video input that is connected
to the Lifestyle
®
system.
2. Turn on the AUX device.
3. On the Lifestyle
®
remote, press AUX.
4. Make the system menu appear on the TV by
pressing System.
5. Move across the menu tabs to Setup by pressing
the right arrow.
6. Move down to AUX Device and press ENTER.
7. Select the type of device from the list and press
ENTER.
8. Move down to AUX Brand and press ENTER.
9. Select the brand of your device and press ENTER.
10. Move down to AUX Code and press ENTER.
11. Select the first device code in the list.
12. Press the (AUX) On/Off button (located under the
AUX button).
If the AUX device turns off, you have chosen the
correct code.
If the device does not turn off, select the next
code and press (AUX) On/Off again.
Continue selecting codes until you find one
that works.
13. When you have a working code, enter it below, then
press ENTER.
AUX Code: ____________________
14. To exit the system menu, press Exit.
You can now use the Lifestyle
®
remote to control your
auxiliary device.
Claudius.book Page 38 Tuesday, January 13, 2009 2:56 PM
39
OPERATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Changing the HDMI Image View
You can specify how certain display formats appear on
your HDTV screen. You control these formats (that are
output from your Lifestyle
®
system) by pressing the
Image View button on the remote. See “Controlling the
(HDMI) Image View” on page 40 and “Settings Options”
on page 45 for information and illustrations on changing
the HDMI Image View.
About the HDMI video resolution
When your Lifestyle
®
system is connected to an HDTV
using the HDMI connector, the video is transmitted at
the prefered resolution of the television. Occasionally,
you may want to specify a lower resolution, even
though your HDTV can display a higher resolution. For
example, a certain source signal may be unpleasant to
your eye when converted by the Lifestyle
®
system to a
much higher resolution. In that case, you can change to
a lower resolution. See “Changing the HDMI video
resolution” on page 43 for information on changing the
HDMI video resolution.
Claudius.book Page 39 Tuesday, January 13, 2009 2:56 PM
40
OPERATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Controlling the (HDMI) Image View
You can specify how you want certain display formats that
are output from your Lifestyle
®
system to appear on your
HDTV screen by pressing the Image View button on the
remote. This button has an effect only when your
Lifestyle
®
system is connected to a widescreen (16:9
aspect ratio) HDTV through the HDMI OUT connector.
To change the display format that is output from your
Lifestyle
®
system, press (Image View) on the
remote.
The Image View (aspect ratio) control that is built into
the HDTV must be set so that the Lifestyle
®
system
Image View settings have the intended effect. Refer to
the manual that came with your HDTV to find out how
to set its Image View.
Pressing the Image View button causes different results
depending on the aspect ratio of the signal input to
your Lifestyle
®
system. The aspect ratio can be either
4:3 or 16:9 (Figure 2). The following tables show the
possible results of pressing the Image View button.
When the TV Control item in the system menu is set to
AUX, VCR, DVD, or CBL•SAT, the Image View button
functions. When the TV Control menu item is set to TV, the
Image View button has no effect.
Figure 2 TV aspect ratios
4:3
16:9
Claudius.book Page 40 Tuesday, January 13, 2009 2:56 PM
41
OPERATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Table 1 Image view choices with a 4:3 aspect ratio input signal
Image View Effect 4:3 Input Widescreen TV
4:3 Aspect Ratio Input Signal
Normal
(default)
Vertical black bars are added to the left and right
ends of the screen.
Zoom
A 16:9 portion of the center of the signal (inside the
dashed lines) is scaled up to fit the screen. Some
content is lost.
Stretch
A non-linear, horizontal stretch is applied to the
signal to fit it to the screen.
Gray Bars
Vertical gray bars are added to the left and right
ends of the screen instead of black bars. Gray bars
prevent “burn-in,” where permanent shadows
appear at the ends of the screen.
Claudius.book Page 41 Tuesday, January 13, 2009 2:56 PM
42
OPERATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Table 2 Image view choices with a 16:9 input signal
Image View Effect 16:9 Input Widescreen TV
16:9 Input Signal
Normal
(default)
Signal is unchanged.
Zoom
A 16:9 portion of the center of the signal
(inside the dashed line) is scaled up to enlarge
the overall picture. Some content along the
edges is lost.
Stretch
A non-linear, horizontal stretch is applied to the
signal, making the image appear to be wider
than it actually is.
Gray Bars
Vertical gray bars are added to the left and right
ends of the screen.
Claudius.book Page 42 Tuesday, January 13, 2009 2:56 PM
43
OPERATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Changing the HDMI video resolution
Your Lifestyle
®
system transmits video at a resolution of
720p to your HDTV. Occasionally, you may want to
change to a different resolution. For example, if your
HDTV is capable of displaying a 1080p source signal,
you could change to a 1080p resolution.
The video resolution can only be set when the Lifestyle
®
system is connected to an HDTV through the HDMI
OUT connector. Also, the video resolution cannot be set
lower than that of the video signal entering your
Lifestyle
®
system (no down-conversion). Finally, the
video resolution you set for the HDMI output applies
across all the sources. For example, setting the video
resolution for CBL-SAT also sets that resolution for all
other sources ( DVD, VCR, and AUX).
To change to a lower resolution, do the following:
1. On the Lifestyle
®
remote, press the Settings button
and see if (Video Resolution) is in the list of
menu options. If it is, go to Step 2. Otherwise, the
ability to access this option has been disabled in
the System menu, and you must complete Steps A
through D (below) to enable it.
A. On your remote, press System to display the
system menu on the HDTV.
B. Move right to (Video), then press ENTER.
C. Move down to Video Resolution and press
ENTER.
D. Choose Adjustable, then (on the remote) press
Settings.
2. Move down to , then press ENTER.
3. Select a resolution, then press Exit.
Claudius.book Page 43 Tuesday, January 13, 2009 2:56 PM
44
OPERATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Listening to the radio
To listen to the radio, press the FM or AM button to
select the tuner and turn it on.
To manually tune a station, press the Tune Up or Tune
Down button
.
To quickly tune to a station, press one of the preset
buttons.
To seek the next station with a relatively strong signal,
press the Seek button.
Presets
A radio station preset allows you to quickly tune to a
favorite station. You can add presets for up to 20 AM
and 20 FM stations. To add a preset:
1. Decide on a preset number.
2. Use the remote control to tune to a station.
3. To assign the number to the current station, press
and hold the corresponding number button:
For numbers 1 through 9, press and hold the
number until the display module briefly indicates
PRESET:xx SET (where xx is the number you
pressed).
For numbers 10 through 20, press the first
number, then press and hold the second
number until the Lifestyle
®
display module
briefly indicates PRESET:xx SET.
Once a preset is added, you can tune to that station by
pressing the preset number.
To remove a preset, tune to the preset station, then press
and hold zero until the message PRESET:xx ERASED
briefly appears on the display module.
Claudius.book Page 44 Tuesday, January 13, 2009 2:56 PM
45
OPERATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Setting the coaxial audio source
One of the two coaxial (coax) digital audio connectors
on the back of the Lifestyle
®
media center is assigned
to the DVD player. The other connector, labeled
“Assignable,” can be assigned to “None, TV, VCR,
CBL·SAT or AUX.” To assign the coax connector:
1. Display the Lifestyle
®
system menu on the TV by
pressing System.
2. To display the Media Center menu, select ,
then press ENTER.
3. Move down to Coaxial Source and press ENTER.
4. Move up or down to select an assignment from the
list and press ENTER.
5. Press Exit.
Headphone listening
To privately listen to your Lifestyle
®
system, you can
connect headphones to the jack that is located on the
right side of the media center as you face it.
Note: Connecting headphones causes all main room
speakers to be muted.
CAUTION:
Long-term exposure to loud music may cause
hearing damage. It is best to avoid extreme volume when using
headphones, especially for extended periods.
Settings Options
The settings menu allows you to quickly adjust menu
options to increase your enjoyment while watching
video or listening to music on your system. For
example, you may only want to hear the front two
speakers instead of all five. Or you may want to change
the resolution of the video output to an HDTV.
To view the settings menu:
1. Use the remote control to select the source.
2. Press the Settings button to display the menu.
To change menu settings, select one of the options,
then press Enter.
Table 3 details the features, default settings, optional
settings, and effects of each menu item.
Claudius.book Page 45 Tuesday, January 13, 2009 2:56 PM
46
OPERATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Table 3 Settings options
Features
Default Setting
(Options)
Effect
2-3-5 speakers
For TV, CBL•SAT,
DVD, VCR, AUX:
5 VIDEO
(5 AUDIO 2, 3)
For FM/AM:
5
(2, 3)
Determines the number of speakers playing. If you prefer to
hear stereo material played on the front left and right
speakers only, select 2. If you prefer to watch movies
without hearing the rear channels, select 3. If you prefer to
listen to all 5 speakers optimized to play musical sources,
select 5 AUDIO.
Surround
0
(-10, -9, -8, -7, -6, -5,
-4, -3, -2, -1, 0, +1,
+2, +3, +4, +5, +6)
Increases or decreases rear speaker volume.
Center Channel
0
(-8, -7, -6, -5, -4, -3,
-2, -1, 0, +1, +2, +3,
+4, +5, +6, +7, +8)
Increases or decreases front center speaker volume.
Claudius.book Page 46 Tuesday, January 13, 2009 2:56 PM
47
OPERATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Audio Delay
(not available on
FM·AM)
2
(0, 1, 3, 4, 5, 6, 7, 8)
Corrects for delays that can be introduced by video
processing within an external device such as your TV. Video
processing delays cause the video and audio to lose their
synchronization. This condition is most noticeable with
spoken portions of program material. If you notice that
people on the TV finish sentences before they finish moving
their lips, use the Audio Delay menu item to correct this
condition.
Movie EQ
(not available on
FM·AM)
Off
(On)
(In the System menu, Audio Processing must be set to User
Adjustable.) Corrects for sonic differences between a full-
size movie theater and your home theater when a Dolby
Digital movie soundtrack is playing.
Range
Compression
(not available on
FM·AM)
On
(Off)
(In the System menu, Audio Processing must be set to User
Adjustable.) Reduces the difference between the quietest
and loudest sounds on a movie soundtrack. Some movie
soundtracks present a significant difference in volume
between the quietest and loudest sounds. The difference
between a soft voice and a sudden loud explosion can be
quite startling. Late at night, or at other quiet times, those
kinds of effects could be undesirable. Range Compression
moderates those effects.
Mono
Decoding
(not available on
FM·AM)
On
(Off)
(In the System menu, Audio Processing must be set to User
Adjustable.) When only one (mono) channel of audio is input,
Mono Decoding engages Videostage
®
decoding to produce
sound from the selected (2, 3, or 5) speakers.
Features
Default Setting
(Options)
Effect
Claudius.book Page 47 Tuesday, January 13, 2009 2:56 PM
48
OPERATION
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Audio 1 + 1
(not available on
FM·AM)
Both
(1, 2)
Allows you to decode and play bilingual audio (if available)
from a single Video CD, or a single-channel HDTV
broadcast. Video CD or digital broadcast audio content is
sometimes presented as two channels, each channel having
a unique mono soundtrack (1 + 1).
The Audio 1 + 1 setting allows you to select mono channel 1,
mono channel 2, or both mono channels at the same time.
SD Progressive
Scan
(not available on
FM·AM)
Off
(On)
(Your Lifestyle
®
system must be connected to a TV through
the component video connectors.) Converts Standard Defi-
nition (480/576i) input signals to Enhanced Definition (480/
576p) output signals. The Enhanced Definition picture is
sharper and clearer than the Standard Definition picture.
Video
Resolution
(HDTV-only
feature)
720p
(1080p, 1080i,
480/576p)
(Your Lifestyle
®
system must be connected to an HDTV
through the HDMI connector.) Allows you to change the
video resolution output using your Lifestyle
®
system.
Normally, the Lifestyle
®
system outputs video to your HDTV
at 720p.
Image View
(HDTV-only
feature)
Normal
(Zoom, Stretch, Gray
Bars)
(Your Lifestyle
®
system must be connected to an HDTV through
the HDMI connector.) Specifies how certain display formats
output from your Lifestyle
®
system appear on the HDTV
screen. (See “Controlling the (HDMI) Image View” on page 40.)
When the TV Control parameter in the system menu is set to
AUX, VCR, DVD, or CBL•SAT, the Image View icon appears in
the settings menu for the TV. When TV Control is set to TV, the
Image View icon does not appear under the TV settings menu.
Features
Default Setting
(Options)
Effect
Claudius.book Page 48 Tuesday, January 13, 2009 2:56 PM
49
OPERATION
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Output Mode
(FM-only)
Auto
(Mono - Stereo)
Allows you to choose between stereo or monaural (mono)
sound through one of three selections:
Auto – The FM tuner will automatically output stereo if
available. Otherwise, it will output mono sound.
Mono – The FM tuner will always output mono sound.
Stereo – The FM tuner will always output stereo if
available. Otherwise, it will output mono sound.
When you change the tuner frequency, the setting resets to
Auto.
RDS Info
(FM-only, not
available in the
U.S.)
Off
(On)
When On, displays RDS information for the current radio
station.
Sleep Timer
Off
(10-90)
Turns off your Lifestyle
®
system and all components under its
control after the set time expires. Timer can be set from 10 to
90 minutes in 10-minute increments. To set the timer, select a
time increment. The countdown begins after 3 seconds. To
cancel the timer, select Off.
Features
Default Setting
(Options)
Effect
Claudius.book Page 49 Tuesday, January 13, 2009 2:56 PM
50
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
System maintenance
Changing the remote control batteries is the only
regular maintenance required.
However, switches inside the remote battery case can
be changed. Similar changes may be required for any
additional remotes purchased for use in other rooms.
Note: For further information on switch settings refer to
“Changing remote control switch settings” on page 51.
Replacing the remote control batteries
Replace all four batteries when the remote control
stops operating or its range seems reduced. Alkaline
batteries are recommended.
1. Slide open the battery compartment on the back of
the remote (Figure 17).
2. Insert four AAA or IEC-LR3 1.5V batteries, or the
equivalent, as shown. Match the + and – symbols
on the batteries with the + and – markings inside
the compartment.
3. Slide the battery compartment cover back into
place.
Figure 17 Installing the remote control batteries
Battery
compartment
cover
Battery
compartment
AAA batteries (4)
REFERENCE
Claudius.book Page 50 Tuesday, January 13, 2009 2:56 PM
51
REFERENCE
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Changing remote control switch settings
Each Lifestyle
®
remote control uses a house code that
corresponds to the house code set in the media center,
enabling the two to communicate. If another Lifestyle
®
system nearby creates a conflict with your system, you
can easily set a new house code in your media center
and its remote control(s) with the following steps:
1. Open the remote control battery cover and locate
the miniature switches (Figure 18 on page 52).
2. Move one or more of switches 1, 2, 3, or 4 in the
opposite direction from its current setting. Use a
paper clip, ballpoint pen, or similar object.
Note: DO NOT change any other switch settings.
Moving other switches may disable your remote control.
3. Replace the battery cover.
4. With the system off, press and hold the Mute
button on the display.
The system remains off, but the current house
code appears on the display in the form of four
rectangles, which represent the positions of
switches 1 through 4:
5. While still holding the Mute button on the display,
press any button on the remote control.
The new house code you set in step 2 shows on
the display.
6. Release the display Mute button. The system
remains off.
7. If you have additional remote controls, change the
switches to match those of the first remote control
by following steps 1-3 above. You do not need to
repeat steps 4 through 6.
Note: To verify your system’s house code, press
the Mute button on the display while the system is off.
The display confirms the settings of switches 1-4.
HOUSE CODE:
Switches 1 - 4 down = 0 0 0 0 (current house code)
NEW HOUSE CODE:
(Switch 1 up, 2 down, 3 up, and 4 down = 1 0 1 0)
(new house code)
Claudius.book Page 51 Tuesday, January 13, 2009 2:56 PM
52
REFERENCE
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Figure 18 Miniature switches on the primary remote are set for use in the main room
Switches 1-4 need to match those
switch settings in your main remote.
Set switches 5-9 for the room where
you will use the Bose
®
link remote.
Switch 5 determines which audio
stream (of two) you hear.
For more information on streams,
refer to “Setting up a second room
with sound” on page 53.
Switches 6-9 represent the room
where the remote will be used.
In the main room, the primary
remote is set as Room A with all
switches down.
Other switches
For a Bose
®
link remote
in another room
Switches (1-4),
as set at the factory.
All switches are down.
Claudius.book Page 52 Tuesday, January 13, 2009 2:56 PM
53
REFERENCE
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Setting up a second room with
sound
Your Lifestyle
®
home theater system can direct sound
to more than one room at the same time. What’s more,
it can direct the audio from two different sound sources
(such as AM/FM tuner, DVD, or AUX) to these rooms
through two independent audio streams.
In additional rooms where you have speakers (beyond
the main room where the media center is located), you
can choose to listen to either of the two audio streams.
So, when music is playing in the main room, listeners
in other rooms can enjoy that same music or an entirely
different audio source from the system, for true
independence.
Capable of supplying up to 14 additional rooms with
Bose
®
quality sound, one Lifestyle
®
system can fill your
entire living space with music.
Bose
®
link-compatible products make it easy
As an option to provide sound throughout your home
(or even outdoors), the Bose
®
link network connects all
the pieces and offers a variety of Bose products of
consistent quality for use in other rooms.
These include: the Bose
®
link AL8 homewide wireless
audio link, the Wave
®
music system, 3•2•1
®
, 3•2•1 GS,
or 3•2•1 GSX systems, the Lifestyle
®
RoomMate
®
powered speaker system, and other unpowered
speakers for indoors or out. We also offer amplifiers of
different power ratings, plus the proper cables and
adapters to connect it all together.
With the purchase of a Bose
®
link remote control for
each additional room, managing your whole-house
music system becomes quick and easy. It’s a simple
matter to preset each remote for the room where it will
be used and for the audio stream you want it to receive.
Claudius.book Page 53 Tuesday, January 13, 2009 2:56 PM
54
REFERENCE
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
For added versatility, you may prefer using a Personal
®
music center II to control the sound in your other
rooms. Besides providing the ability to switch between
program streams instantly, this advanced remote pro-
vides an LCD screen that shows you what is currently
playing and what other listening options you have.
Regardless of which options you choose, each Bose
®
link-compatible product includes detailed instructions
for adding it to your Lifestyle
®
V-Class™ home theater
system.
For more information on your options, or to purchase
additional equipment, contact your local Bose dealer.
Or, to reach Bose directly, refer to the address list
included with your system.
Bose
®
link remote switch settings
These settings apply only to remote controls with battery
compartment switches.
House code switches (1, 2, 3, and 4) must match
those on your main remote.
Consider your choices for Switch 5:
Change the switch so the expansion room shares the
audio stream heard in the main room (A).
Leave the switch unchanged, so the expansion room
receives a different audio stream from the main room (A).
Room code switches (6, 7, 8, and 9) must be unique
to each new remote, unless for use in the main room
(A) along with the primary remote.
Figure 19 Bose
®
link remote switch setting combinations
Claudius.book Page 54 Tuesday, January 13, 2009 2:56 PM
55
REFERENCE
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Taking care of your Lifestyle
®
system
Follow the guidelines below when cleaning the
surfaces.
Do not use any solvents, chemicals, or cleaning solu-
tions containing alcohol, ammonia, or abrasives.
Do not use any sprays near the system.
Cleaning the media center and display
Use only a soft, dry cloth to clean the outside of the
media center and display.
Cleaning the speakers
Clean the surface of your speakers with a soft, damp
cloth. You can use an ammonia-free window cleaner on
a soft cloth to maintain the finish.
The speaker grille panels require no special care,
although you may vacuum them carefully, if necessary.
Setting power supply voltage
(dual-voltage systems only)
If you have a dual-voltage power supply, make sure the
voltage selection switch on the bottom of the media
center power supply matches the local power rating.
Check with local electrical authorities if you are not sure
of the appropriate power rating.
Claudius.book Page 55 Tuesday, January 13, 2009 2:56 PM
56
REFERENCE
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Troubleshooting
Problem What to do
System doesn’t do
anything
Make sure the AC power cord is inserted securely into the power supply.
Make sure the Acoustimass
®
module and the power supply are fully plugged into
operating AC wall outlets.
Be sure to press a source button (DVD, VCR, FM, etc.) on the Lifestyle
®
remote control.
Unplug the power supply for 60 seconds, then reconnect it.
This allows the unit to reset itself after a power surge or power interruption.
If you have a dual-voltage system, make sure the voltage selection switch on the bottom
of the media center power supply is set to match the local power rating.
No sound Increase the volume.
Check to see if MUTE is lit on the display. If it is, press the Mute button on the remote
control to unmute the sound.
Check the connections for any external components. Make sure that you have pressed
the correct remote button for the source you want to hear.
Connect the FM and AM antennas.
Make sure that the audio input cable:
Connector is firmly seated in the media center Main Speaker jack.
Multi-pin connector at the other end is firmly seated in the Acoustimass module
AUDIO INPUT jack.
Check connections between the cube speakers and the module.
Turn off the media center for 60 seconds, then on again, to restore communication
between the media center and the speakers.
Claudius.book Page 56 Tuesday, January 13, 2009 2:56 PM
57
REFERENCE
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
Sound is marred by a
loud hum or buzz, which
may be electrical in
nature (not harmonic)
Contact Bose
®
Customer Service to determine if and how other electrical components in
the room may be creating unwanted signals, and the possible remedies.
No sound from center
speaker
Make sure the center speaker cable is connected at both ends.
Select 3- or 5-speaker mode.
Too much sound from
center speaker
Decrease the Center Channel setting.
No sound from
surround speakers
Select 5-speaker mode.
Increase the Surround setting for the source being played.
Make sure the video sound source is stereo-encoded or surround-encoded, and the
component used (DVD, VCR, DVR, etc.) is stereo.
Surround speakers
are too loud
Decrease the Surround setting for the source being played.
Make sure that the left and right front speakers are connected to the front speaker jacks,
and the left and right surround speakers are connected to the surround speaker jacks.
Lifestyle
®
remote
behaves erratically or it
does not work
(If this occurs when used
with a plasma display TV,
see the problem below.)
Check batteries and their polarity (+ and –).
If you are using a plasma display TV, make sure the media center power source is as far
away from the TV as possible.
Move the remote (or the media center) a few feet to avoid an area of “dead spots.
Make sure the remote control and media center house codes match.
Contact Bose Customer Service for assistance.
Problem What to do
Claudius.book Page 57 Tuesday, January 13, 2009 2:56 PM
58
REFERENCE
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
With a plasma display
TV turned on,
the Lifestyle
®
remote
behaves erratically
Momentarily disconnect the video cable (HDMI, composite, S-video, or component) to
see if remote performance improves.
If performance improves, the problem may be remedied by obtaining “ferrite chokes”
and placing them on the cable to draw away the interference. To purchase the chokes,
contact Bose
®
Customer Service for assistance.
System turns on by itself
or behaves erratically
Change the house code setting to prevent signals from conflicting with another nearby
Lifestyle
®
system. (See “Changing remote control switch settings” on page 51.)
Radio does not work Make sure antennas are connected properly.
Move AM antenna at least 20 inches (50 cm) from the media center, display module, and
Acoustimass
®
module.
Adjust antenna position to improve reception.
Make sure the AM antenna is in an upright position.
Move antennas farther from media center, display module, TV, or other electronic equipment.
Select another station. You may be in an area of weak signal coverage for some stations.
FM sound is distorted Adjust antenna position to reduce interference.
FM sound is noisy
in surround mode
Weak FM stations will produce static in the surround speakers. Select the 2-speaker
mode in the Settings menu to minimize noise.
Sound is distorted Make sure speaker cables are not damaged and the connections are secure.
Reduce the output level from any external components connected to the media center.
No sound from TV, DVD,
VCR, CBL·SAT, or AUX
Check the connections.
Make sure that component is turned on.
Refer to the component owner’s manual.
Problem What to do
Claudius.book Page 58 Tuesday, January 13, 2009 2:56 PM
59
REFERENCE
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
No video on screen,
though the TV audio
functions
Check the TV video input selection. Make sure it is correct for the video source.
Lifestyle
®
remote does
not control your TV, DVD,
VCR, CBL·SAT, or other
external component
Make sure correct codes are set. See “Operation” on page 30.
Make sure that the front of the display is not obstructed.
If you still cannot control your external components successfully, you may need to con-
nect the external IR emitter, included with your system, to the IR EMITTER jack on the
rear panel of the media center. See “Using the IR emitter” on page 20.
Your TV turns
on and off unexpectedly
Reposition the TV on/off sensor on the back of your TV. Or check the SCART connector
if you use one.
Verify that the TV on/off sensor is working properly by checking the
TV Power Status
under the Video tab in the System menu.
TV screen goes dark or
image flips repeatedly
after making a change
to a Video feature in
System settings
In the System menu, make sure the Video format is set to NTSC (U.S. standard) or PAL
(European standard).
In the Settings menu, make sure the SD Progressive Scan setting is off, unless you have
used a component video connection and progressive scan is a feature of the TV.
Problem What to do
Claudius.book Page 59 Tuesday, January 13, 2009 2:56 PM
60
REFERENCE
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Contacting Customer Service
For additional help in solving problems, contact Bose
®
Customer Service. Refer to the address sheet included
in the carton.
Limited warranty
This system is covered by a transferable limited
warranty. Details of the limited warranty are provided
on the Product Registration Card that came with your
system.
IMPORTANT! – Please register your
product right away!
Registering your product entitles you to receive free
system upgrades to keep your product performing
optimally. It also allows us to send you information
about new products and special offers from Bose.
Follow the instructions on your Product Registration
Card to register by mail, on the Internet, or by phone.
It’s quick and easy! Be sure to register before installing
this product.
Failure to register will not affect your limited warranty
rights.
Claudius.book Page 60 Tuesday, January 13, 2009 2:56 PM
61
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
4:3 – See “Aspect ratio.”
5.1 channel surround sound – A movie recording
technique that, when paired with a 5.1-channel home
theater surround speaker system, surrounds the viewer
with sounds from five different speakers for full-range
sound and one speaker for low-frequency effects.
16:9 – See “Aspect ratio.
Analog audio – Sounds that we hear with our ears are
known as analog. Analog audio is data characterized by
being continuously variable. Such data is usually stored
as continuously varying physical undulations (vinyl
albums) or as variations in a magnetic medium (tape).
See Digital.
Aspect ratio – An expression for the width of the pic-
ture relative to the height when seen as a rectangular
TV image. For example, if the aspect ratio is 4:3 (read
as 4 by 3), the shape of that picture is 4 units wide by
3 units high. The standard TV aspect ratios are 4:3
and 16:9.
CD – The abbreviation for compact disc, a
plastic-coated, metallized disc that stores digitally
encoded music for high-quality playback when read by
a laser beam in a compact disc player.
Chapter – A main division of contents in a DVD title.
Coaxial cable – Carries digital audio via a wire between
a source device and your Lifestyle
®
system.
Component video – Also called YPbPr, this video sig-
nal is split into three parts: luminance and two color sig-
nals for considerably better resolution than can be
provided by either composite or S-video signals. This
more complex signal also requires the use of compo-
nent connection jacks, which are not available on all
televisions or video components.
Composite video – The simplest of three types of
video signal, which combines rather than separates
brightness (black and white) and color information. It
provides the lowest resolution of the three, but is com-
patible with the broadest range of televisions and other
video components and requires a simple video cable
connection to RCA jacks.
A
C
GLOSSARY
Claudius.book Page 61 Tuesday, January 13, 2009 2:56 PM
62
GLOSSARY
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
Digital audio – Audio in digital form. Digital audio con-
verts analog sound into a digital signal encoded as bits
of information.
Dolby Digital – A means of encoding multi-channel
audio, developed by Dolby Laboratories and accepted
as an international standard.
Down-conversion – The conversion from a
higher-resolution input signal number to a lower one.
– The logo representing Dolby Digital.
DTS – An abbreviation for Digital Theater Systems. DTS
encoding provides a type of multi-channel surround
sound format used on certain CDs and many DVDs.
– The logo representing DTS.
DVD – An abbreviation most commonly known to mean
digital video disc or digital versatile disc. A DVD looks
like a CD but contains high-quality video and
multi-channel audio for movies.
DVD-R, DVD+R, DVD-RW, DVD+RW – Abbreviations
for Recordable (R) and ReWriteable (RW) Digital Video
(or Versatile) Disc (DVD). Data can be added to a DVD-
R or +R once only, and to a DVD-RW or +RW more than
once.
DVD-ROM – The abbreviation for Read Only Memory
(ROM) on a Digital Video (or Versatile) Disc (DVD), which
allows no data to be added.
DVD video – A standard for storing and reproducing
audio and video on DVD-ROM discs, based on MPEG
video, Dolby Digital audio, and other proprietary data
formats.
DVR – An abbreviation for Digital Video Recording,
sometimes used interchangeably with PVR, for
Personal Video Recording. A DVR uses a hard drive, an
electronic program guide, and internal processing to
drastically simplify programmed recording and
playback of recorded programs.
D
Claudius.book Page 62 Tuesday, January 13, 2009 2:56 PM
63
GLOSSARY
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
HDCP – An abbreviation for High-bandwidth Digital
Content Protection. HDCP is a form of Digital Rights
Management licensed by Digital Content Protection,
LLC, to control digital audio and video content as it
travels across Digital Visual Interface (DVI) or High-
Definition Multimedia Interface (HDMI) connections.
(It prevents unauthorized copying of programs.)
HDMI – An abbreviation for High-Definition Multimedia
Interface. HDMI is a de-facto standard interface that
delivers clear, all-digital audio and video via a single
cable.
HDTV – An abbreviation for High-Definition TV, a digital
television format that delivers sharper picture quality
with more lines of resolution. HDTV offers a much
better picture quality than standard television.
IR – An abbreviation for infrared. Pertains to the type of
remote that sends/receives commands on an infrared
light beam.
Letterbox – A video format that has an aspect ratio
wider than 4:3 (see “Aspect ratio”) and is shown with
black bars above and below the picture.
MP3 – This is a compressed audio format (MPEG-1
Layer III) that allows the recording of many hours of
music on a single CD.
MPEG – An abbreviation for Moving Picture Experts
Group, the
committee of experts from the audio, video,
and computer industries involved in setting standards
for compression of moving images.
NTSC – An abbreviation for National Television System
Committee and the label for its video format standard
used for televisions in the U.S. and other countries.
Optical cable – Carries digital audio via optical fiber
between a source device and your Lifestyle
®
system.
PALAn acronym for the Phase Alternate Line video
format used extensively in Western Europe.
PCM – An abbreviation for Pulse Code Modulation. A
common form of digital audio signal.
Progressive scan – A video format that displays all
lines of the picture frame in a single pass and refreshes
the TV image 30 times per second. Not compatible with
all video displays.
PVR – An abbreviation for Personal Video Recording.
Sometimes used interchangeably with DVR for Digital
Video Recording but may include non-digital technol-
ogy, as used in VCRs.
H
I
L
M
N
O
P
Claudius.book Page 63 Tuesday, January 13, 2009 2:56 PM
64
GLOSSARY
EnglishTAB 6ItalianoTAB TAB TAB 3TAB 5 TAB 2TAB 4
RF remote – A remote control that transmits com-
mands to a device using radio frequency (RF) signals,
which have the ability to penetrate walls, unlike the
infrared (IR) signals used by many remote controls.
RDS – A system that displays radio broadcast station
and programming information. This feature is available
on European systems only.
Resolution – The sharpness of a video image, signal,
or display, generally described either in terms of lines of
resolution or pixels.
SCART – A type of jack commonly found on consumer
electronics products manufactured for use in Western
Europe.
Screen ratio The dimensions of the video display on
a television, which can vary from 4:3 standard to 16:9
widescreen. (See “Aspect ratio) Also called “letter-
box,” widescreen display leaves a black band above
and below the picture on traditional TVs. This does not
occur on widescreen TVs.
Source – Any device, such as a DVD player, that
outputs video and/or audio and can connect to
your Lifestyle
®
system.
S-video – A video signal that separates the brightness
(black and white) and the color information. S-video
provides higher resolution than composite video, but
not as high as from component. This type of connec-
tion is compatible with many televisions and other
video components and requires use of an S-video
cable.
Teletext – An information retrieval service provided by
television broadcast companies in Europe and some
other countries, not including the U.S.
Video CD – A compact disc (CD) that contains a video
component.
Videostage
®
5 – Bose
®
proprietary decoding circuitry
that provides five-channel surround sound perfor-
mance from varied media – VHS tapes, stereo CDs,
even mono TV programs.
Widescreen – A TV having an aspect ratio of 16:9. (See
“Aspect ratio”) The shape of the picture is 16 units wide
by 9 units high.
YPbPr – A component analog video signal containing
one luminance and two chrominance components.
Also referred to as YUV or Y, B-Y, R-Y.
R
S
T
V
W
Y
Claudius.book Page 64 Tuesday, January 13, 2009 2:56 PM
65
TAB TAB TAB 6 TAB TAB English TAB 3TAB 2
©2008 Bose Corporation. No part of this work may be repro-
duced, modified, distributed, or otherwise used without prior
written permission.
Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
Confidential Unpublished Works. ©1992-1997 Dolby Laborato-
ries. All rights reserved.
This product contains one or more programs protected under
international and U.S. copyright laws as unpublished works.
They are confidential and proprietary to Dolby Laboratories.
Their reproduction or disclosure, in whole or in part, or the pro-
duction of derivative works therefrom without the express per-
mission of Dolby Laboratories is prohibited. ©1992-1996 by
Dolby Laboratories, Inc. All rights reserved.
MPEG Layer-3 audio compression technology licensed by
Fraunhofer IIS and THOMSON multimedia.
Manufactured under license under U.S. Patent #’s:
5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and DTS Digital Surround are registered
trademarks and the DTS logos and Symbol are trademarks of
DTS, Inc. ©1996-2007 DTS, Inc. All Rights Reserved.
This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and
other rights owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and is intended
for home and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or
disassembly is prohibited.
Designed with UEI Technology™ Under License from Universal
Electronics Inc. ©UEI 2000-2002.
This product incorporates copyright protected technology and
other intellectual property rights owned by Cirrus Logic, Inc. and
subject to the copyright protection of the U.S. as well as other
licensing restrictions and protections. Use of this copyright pro-
tected technologyis limited solely to use with the Cirrus Logic inte-
grated circuits incorporated in this product. Reverse engineering
or disassembly is prohibited.
The Simplay
TM
logo and the ‘Simplay
TM
,’ and ‘Simplay Labs
TM
,’
trademarks are owned by Silicon Images, Inc. and are used under
license from Silicon Images, Inc. and/or Simplay Labs, LLC.
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing, LLC.
COPYRIGHT AND LICENSE PROTECTIONS
Claudius.book Page 65 Tuesday, January 13, 2009 2:56 PM
©2008 Bose Corporation, The Mountain,
Framingham, MA 01701-9168 USA
AM316801 Rev.02
Owner’s Guide
HOME THEATER SYSTEMS
Lifestyle
®
V-Class
LIFESTYLE
®
V-CLASS
HOME THEATER SYSTEMS
64

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bose Lifestyle V30 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bose Lifestyle V30 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Bose Lifestyle V30

Bose Lifestyle V30 Gebruiksaanwijzing - Nederlands - 66 pagina's

Bose Lifestyle V30 Gebruiksaanwijzing - Deutsch - 70 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info