382458
11
Verklein
Vergroot
Pagina terug
1/71
Pagina verder
English - 3
Saw Blade Storage
Saw blades with a length of up to 100 mm can be
stored in the saw blade storage 5.
To remove the saw blades, pull out the saw blade
storage compartment completely.
Note: T 345 XF / T 234 X saw blades do not fit
into the saw blade storage.
Inserting the Battery
Insert the charged battery 3 into the grip until it
engages noticeably.
Switching On and Off
To start the machine, release the switch lock 1
first (press at symbol) and then press the On/
Off switch 2 afterwards and hold.
To switch off the machine, release the On/Off
switch 2 and activate the switch lock 1 (press
at symbol).
Run-On Brake
An integrated run-on brake immediately reduces
the speed of the saw together with the saw blade
after switching off the machine.
Stepless Stroke-speed Control
Lightly pressing the On/Off switch 2 results in low
stroke speed. Applying more pressure increases
the stroke speed.
Contact Protector
The contact protector 11 attached to the machine
prevents unintentional contact with the saw blade
while working.
Sawdust Blower Device
The saw dust blower device leads an air jet to the
saw blade. The air jet keeps saw dust from cov-
ering the cutting line during operation.
The four pendulum action settings allow optimum
adaptation of cutting speed, cutting capacity and
cutting pattern to the material being sawed.
The pendulum action can be adjusted in four
steps with the adjustment lever 7. Switching is
possible with the machine running:
Step 0: No pendulum action
Step I: Small pendulum action
Step II: Medium pendulum action
Step III: Large pendulum action
Recommendations:
The more narrow and clean the cutting edge
should be, the lower the pendulum action level
should be selected (or switched off).
For thin materials, e. g. sheet metal, switch the
pendulum action off.
For hard materials, e. g. steel, work with low
pendulum action.
For soft materials and when sawing in the di-
rection of the grain, work with maximum pen-
dulum action.
The optimal setting can be determined by practi-
cal testing.
Loosen the screw 16 and push the base plate 6
towards the saw blade. The foot plate can be
tilted up to 45° in both directions.
Various cutting angles can be precisely adjusted
with an angle gauge 15.
For precision bevel angles, the base plate has a
scale 13 with adjustment notches in steps of 15°.
For adjustment, the base plate must be pushed
back towards the battery.
After adjusting retighten the screw 16.
Initial Operation
Pendulum Action Setting
Adjusting the Cutting Angle
(see figure )
B
11 • 2 609 932 131 • 02.03
11

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch pst 14 4 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch pst 14 4 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Turks, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 2,19 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info