EN
Control lights - Connection and temperature selection
Fast freeze control light
(yellow)
Figure s/8
This light comes on when the fast freeze
function is connected.
It goes off when the fast freeze function is
disconnected.
Freezer compartment
temperature warning light
(red)
Figure s/9
This flashes on and off when the
temperature in the freezer compartment is
too high, and also when the frozen food is at
risk. It could flash temporarily with no risk to
the frozen food: when the unit is first
switched on, when a large quantity of fresh
foood is introduced, when the door of the
unit is open for too long, and when the
temperature selector is moved to a higher
setting (colder temperature).
The refrigerator compartment and the
freezer compartment can function
independently.
Refrigerator compartment
connection and temperature
selection
Connection figure s
The refrigerator is connected with control
button 1.
When this is pressed, a green light will
shine around its outside edge, and the
interior light will come on.
When selector 2 is turned from left to right,
the thermostat position may be selected,
and thus the required interior temperature.
The position may be read on indicator scale
3; the coldest temperature is indicated with
the + sign.
Freezer compartment
connection and temperature
selection
Connection figure s
The freezer is connected with control button 5.
When this is pressed, a green light will
shine around its outside adge.
The thermostat position may be selected,
and thus the required interior temperature,
by turning selector 6 from left to right.
The position may be read on indicator scale
7; the coldest temperature is indicated with
the + sign.
When connecting the unit for the first time, it
is advisable to select the coldest position.
You will see thet warning light 9 comes on,
wich means that the necessary temperature
has not yet been reached; the light will go
off after a few hours.
Once the light has gone off, an intermediate
thermostat position may be selected.
Warning:
Pearls of water or drips form in the
evaporator in the refrigerator compartment
while the condensor is in operation,
indicating that the refrigerator is working. It
is not necessary to scrape off the layer of
frost, nor to remove the pearls of water.
The evaporator defrosts automatically.
The defrosted water is collected in the
drainage duct, figure a/13, and is
channelled to the condensor, where it is
evaporated.
14
