597443

Bosch WAE2447XEE Handleiding

2
Verklein
Vergroot
Pagina terug
1/8
Pagina verder
7
Overview of programmes a Refer to the table of consumption values on page 8 and notes on page 6.
Programmes °C max. Type of laundry Additional functions; information
LFCottons D - 90 °C
7 kg/
4 kg*
Hard-wearing fabrics, heat-resistant fabrics made of cot-
ton or linen Ĉ SpeedPerfect*, ć EcoPerfect, S Reduced Ironing, = Aqua Plus
+7 Prewash
VSensitive D - 60 °C Hard-wearing fabrics made of cotton or linen
Ĉ SpeedPerfect*, ć EcoPerfect, S Reduced Ironing, = Aqua Plus;
for particularly sensitive skin, longer wash cycle at selected temperature,
higher water level, additional rinse cycle
IEasy-Care D - 60 °C
3 kg
Easy-care fabrics made of cotton, linen, synthetic fibres
or blended fabrics Ĉ SpeedPerfect, ć EcoPerfect, S Reduced Ironing, = Aqua Plus
+7 Prewash
/Mixed Load D - 40 °C Fabrics made of cotton or easy-care fabrics Ĉ SpeedPerfect, ć EcoPerfect, S Reduced Ironing, = Aqua Plus;
different types of laundry can be washed together
KDark Wash D - 40 °C Dark-coloured fabrics made of cotton and dark easy-
care fabrics
Ĉ SpeedPerfect, ć EcoPerfect, S Reduced Ironing, = Aqua Plus;
Reduced rinse and final spin cycle
cDelicate/Silk D - 40 °C
2 kg
For delicate, washable fabrics, e.g. made of silk, satin,
synthetic fibres or blended fabrics (e.g. curtains)
Ĉ SpeedPerfect, ć EcoPerfect, S Reduced Ironing, = Aqua Plus;
No spin between rinse cycles
: / Wool D - 40 °C Handä or machine-washable fabrics made of wool or con-
taining wool
Particularly gentle wash programme to avoid shrinkage of laundry,
longer programme breaks (fabrics rest in the detergent solution)
@Super Quick 15 D - 40 °C Easy-care fabrics made of cotton, linen, synthetic fibres
or blended fabrics
Short programme, approx. 15 minutes,
suitable for lightly soiled laundry
ZSportswear D - 40 °C Fabrics made from microfibre Ĉ SpeedPerfect, ć EcoPerfect, S Reduced Ironing, = Aqua Plus
Additional programmes 2 Rinse, Spin, > Drain, Gentle Spin
*Reduced load for additional ĈSpeedPerfect function.
As a short programme, /Mixed Load 40 °C,with a maximum spin speed, is ideal.
Programmes without pre-wash - add detergent to compartment II, programmes with pre-wash - distribute the detergent between compartments Iand II.
9209 / 9000660357
*660357* WAE24460GB ...
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Germany
8
Safety instructions
Read the instruction manual and installation instructions and all other information enclosed with the washing
machine and act accordingly.
Retain the documents for subsequent use.
Risk of electric shock Never pull the cable to disconnect the mains plug.
Never insert/disconnect the mains plug with damp hands.
Danger to life For worn-out appliances:
Disconnect the mains plug.
Sever the mains cable and discard along with the plug.
Destroy the lock on the washing machine door. This will prevent children from
locking themselves in and risking their lives.
Danger of suffocation Keep packaging, film and packaging parts out of the reach of children.
Risk of poisoning Keep detergents and care products out of the reach of children.
Risk of explosion Items of laundry pretreated with cleaning agents containing solvents, e.g. stain
remover / cleaning solvent may lead to an explosion after being loaded into the
washing machine.
Rinse items of laundry thoroughly by hand beforehand.
Risk of injury The washing machine door can become very hot.
Be careful when draining hot detergent solution.
Do not climb onto the washing machine.
Do not lean on the open washing machine door.
Do not reach into the drum if it is still rotating.
Be careful when opening the detergent drawer while the machine is in operation.
Consumption values depending on model
Programme Load Electricity*** Water*** Programme
duration***
LFCottons 30 °C* 7 kg 0,55 kWh 60 l 02:36 h
LFCottons 40 °C* 7 kg 0,69 kWh 60 l 02:36 h
LFCottons60 °C* 7 kg 1,33 kWh 60 l 02:41 h
LFCottons 90 °C 7 kg 2,00 kWh 64 l 02:48 h
Easy-Care 40 °C* 3 kg 0,55 kWh 55 l 01:37 h
/Mixed Load 40 °C 3 kg 0,48 kWh 32 l 01:03 h
cDelicate/Silk 30 °C 2 kg 0,21 kWh 31 l 00:41 h
:ü/Wool 30 °C 2 kg 0,19 kWh 39 l 00:40 h
* Programme setting for testing in accordance with valid standard EN60456.
Note on comparative tests: For testing the test programmes, wash the specified load using the maximum spin speed.
Programme Additional function Load Annual energy
consumption
Annual water
consumption
LFCottons40/60 °C ćEcoPerfect** 7/3,5 kg 197 kWh 10560 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold water (15 ºC).
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected additional
functions.
9
Care
Before washing for the first time
Do not load any laundry into the machine. Turn on the tap. Add the following to compartment II:
approx. 1 litre water
detergent (dosage according to the manufacturer's instructions for light soiling and the
appropriate degree of water hardness)
Set the programme selector to I Easy-Care 60 °C and select $Start/Reload. At the end of
the programme, turn the programme selector to Off.
Machine housing, control panel
Wipe with a soft, damp cloth.
Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
Remove detergent and cleaning agent residue immediately.
Do not clean with a jet of water.
Cleaning the detergent drawer and housing...
... if it contains detergent or fabric softener residues.
1. Pull the drawer out, press down the insert and fully remove the drawer from
the housing.
2. To remove the insert: press the insert upwards from below with your finger.
3. Clean the detergent dispenser tray and insert with water and a brush and
dry it. Also remove any detergent or fabric softener residues in the housing.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Washing drum and rubber seal
Wipe the inside of the rubber seal dry with a cloth. Leave the washing machine door open so
that the drum can dry out. Rust stains - use chlorine-free cleaning agent, not steel wool.
Descaling Ensure there is no laundry in the machine
Descale the appliance according to the descaler manufacturer's instructions. This should not
be necessary if the correct dosage of detergent is used.
Emergency release, e.g. in the event of a power cut
The programme continues to run when the power has been restored. However, if the laundry
has to be removed, the washing machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot. If possible, leave it to cool
down. Do not reach into the drum if it is still rotating. Do not open the
washing machine door if water can be seen through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution apage 10.
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
Information on the display panel depending on model
F: 16 Close the washing machine door properly; laundry may be caught.
F: 17 Open the tap completely, supply hose kinked or trapped;
Clean the filter a page 10, Water pressure too low.
F: 18 Detergent solution pump blocked; Clean the detergent solution pump apage 10.
Drainage hose / waste pipe blocked; Clean the drainage hose at the siphon apage 10.
F: 21 Motor fault. Call customer services.
F: 23 Water in the base tub, appliance leaking. Call customer services.
Risk of electric shock. Disconnect the mains plug.
Risk of explosion. No solvents.
10
Maintenance
Detergent solution pump
Turn the programme selector to Off and disconnect the mains plug.
1. Open and remove the service flap.
2. For models with a drainage hose: Remove the drainage hose from
the retainer and pull it from the housing.Remove the container.
Remove the sealing cap, allow the detergent solution to flow out.
Replace the sealing cap and place the drainage hose in the retainer.
2* For models without a drainage hose: Carefully unscrew the pump cover
until the detergent solution begins to flow out.When the service flap is half
full, close the pump cover and empty the service flap. Repeat the above
steps until all the detergent solution has completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in
the detergent solution pump must rotate).
5. Replace the pump cover and screw it tightly.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash:
Pour 1 litre of water into compartment II and start the >Drain programme.
Drainage hose at the siphon
Turn the programme selector to
Off
and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual
water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose
clamp.
Filter in the water supply
Risk of electric shock
Do not immerse the HydroSafe safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (apart from Spin / >Drain).
3. Choose $Start/Reload. Let the programme run for approximately 40
seconds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance,
Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
Risk of scalding.
Allow the detergent solution to cool down.
Turn off the tap.
11
What to do if ...
ʑWater is leaking out. Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose.
ʑNo water supply.
Detergent not
dispensed.
$Start/Reload not selected?
Tap not turned on?
Filter blocked? Clean the filter apage 10.
Supply hose kinked or trapped?
ʑWashing machine door
cannot be opened.
Safety function active. Programme stopped? apage 4.
(without final spin) selected? a page 3, 4.
Can be opened by emergency release only? a page 9.
ʑProgramme does not
start.
$Start/Reload or Ready in time selected?
Washing machine door closed?
Childproof lock active? Deactivate apage 5.
ʑDetergent solution is
not drained.
(without final spin) selected? a page 3, 4.
Clean the detergent solution pump apage 10.
Clean the waste pipe and/or drainage hose.
ʑWater not visible in the
drum.
Not a fault - water below the visible area.
ʑUnsatisfactory spin
result.
Laundry wet/too damp.
Not a fault - the unbalanced-load detection system has cancelled
the spin cycle because of uneven distribution of the laundry.
Distribute small and large items of laundry evenly inside the drum.
SReduced Ironing selected? a page 5.
Selected speed too low? a page 5.
ʑThe programme
duration changes
during the wash cycle.
Not a fault the programme sequence is optimised for the
particular wash process. This may result in changes to the
programme duration in the display field.
ʑSpin cycle performed
several times.
Not a fault - unbalanced load detection system adjusts the
imbalance.
ʑResidual water in the
compartment for care
products.
Not a fault - the action of the care product is not affected.
Clean the insert if necessary apage 9.
ʑOdour formation in the
washing machine.
Run programme LFCottons 90 °C without laundry. Use standard
detergent.
ʑStatus display³1flashes. Foam may be
coming out of the
detergent drawer.
Too much detergent used? Mix 1 tablespoon of fabric softener with
½ litre of water and pour into dispenser II (not for outdoor and
down-filled textiles!).
Reduce the detergent dosage for the next wash cycle.
ʑIntense noise
formation, vibrations
and wandering
during the spin cycle.
Are the appliance feet fixed?
Secure the appliance feet a Installation instructions.
Transportation safety devices removed? Remove the transportation
safety devices a Installation instructions.
ʑNoises during spin and
drain cycles.
Clean detergent-solution pump apage 10.
ʑDisplay panel/indicator
lamps do not function
during operation.
Power cut?
Fuses triggered? Reset/change the fuse.
If the fault occurs repeatedly, call customer services.
ʑProgramme sequence
longer than usual.
Not a fault - unbalanced load detection system adjusts imbalance
by repeatedly distributing the laundry.
Not a fault - foam detection system active - adds an additional rinse
cycle.
ʑDetergent residues
on the laundry.
Occasionally, phosphate-free detergents contain water-insoluble
residues.
Use the 2 Rinse cycle or brush out the laundry after washing.
If you cannot correct a fault yourself (switching on/off) or a repair is required:
Turn the programme selector to Off and remove the mains plug from the socket.
Turn off the water supply and call customer services a Installation instructions.
Washing machine
en Instruction manual
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch WAE2447XEE bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch WAE2447XEE in de taal/talen: Engels als bijlage per email.

De handleiding is 2,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bosch WAE2447XEE

Bosch WAE2447XEE Gebruiksaanwijzing - Espanõl - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info