697439
22
Verklein
Vergroot
Pagina terug
1/40
Pagina verder
22 | Mounting
Uni 3000 F6 720 812 900 (2014/10)
Fig. 25 Installing the temperature sensor set on the Uni 3000 F
1400 kW to 1850 kW
[1] Test point (sensor pocket 3/4")
[2] Sensor well in the test point
[3] Sensor set
[4] Sensor retainer
[5] Control unit
[6] Compensating spring
When using the CFB 810 control unit with CME 930 auxiliary
module:
Fit the temperature sensor of the CME 930 as contact sensor on site
to the boiler return using heat conducting paste and a tie.
4.9 Control unit settings
The purpose of optimum control unit settings is to achieve long burner
runtimes and avoid rapid temperature changes in the boiler. Gentle
temperature changes result in a longer heating system service life. The
control strategy of the control unit must therefore be prevented from
becoming ineffective, i.e. through the boiler water controller switching
the burner on and off.
Maintain the minimum differential between the selected shutdown
temperature of the high limit safety cut-out, the temperature
controller, the maximum boiler water temperature and the maximum
temperature demand ( Tab. 14 to 16, page 23).
Select set temperatures for the heating circuits that are as low as
possible.
Start heating circuits (e.g. when starting up in the mornings) at
5-minute intervals.
NOTICE: Risk of system damage from incorrect sensor
position.
Fitting the temperature sensor elsewhere can result in
system damage.
Install the temperature sensor of the CME 930 only in
the boiler return as the responsibility of this module
is to safeguard against low return temperatures and
condensing.
We recommend using a control unit from the CFB series.
1
5
2
3
4
6 720 812 900-36.1TL
6
The maximum boiler water temperature can be selected
in the control unit (programmer) in the “Boiler
parameters” menu, under menu item “Max. shutdown
temperature”.
If a CFB 9xx control unit is used, burner modulation in
standard mode is not enabled for 3 minutes. Never
modulate upwards more quickly than this.
Adjustable parameter
(max. temperature)
CFB 910/CFB 930
High limit safety cut-out (STB)
1)
1) Set the high limit safety cut-out and temperature controller as high as possible,
but ensure the settings are at least 5 K apart.
110 °C
at least 18 K
 minimum 5 K
Temperature controller (TR)
1)
105 °C
 minimum 6 K
Max. boiler water temperature 99 °C
 minimum 7 K 
Max. temperature demand
2)
of
heating circuit
3)
and DHW
4)
2) Both temperature demands must always be at least 7 K under the maximum
boiler water temperature.
3) The temperature demand of heating circuits equipped with a mixing valve is
composed of the set flow temperature and the “Boiler rise” parameter in the
heating circuit data menu.
4) The temperature demand of DHW heating is composed of the set DHW
temperature and the “Boiler rise” parameter in the DHW menu.
92 °C
Table 14 Adjustable parameter CFB 910/CFB 930
Adjustable parameter
(max. temperature) CFB 940
High limit safety cut-out (STB)
1)
1) Set the high limit safety cut-out and temperature controller as high as possible,
but ensure the settings are at least 5 K apart.
120 °C
 minimum 5 K
Temperature controller (TR)
1)2)
2) The TR does not function on the CFB 940 in automatic mode.
105 °C
 minimum 6 K
Max. boiler water temperature 112 °C
 minimum 7 K 
Max. temperature demand
3)
of heating circuit
4)
and DHW
5)
3) Both temperature demands must always be at least 7 K under the maximum
boiler water temperature.
4) The temperature demand of heating circuits equipped with an actuator is
composed of the set flow temperature and the “Boiler rise” parameter in the
heating circuit data menu.
5) The temperature demand of DHW heating is composed of the set DHW
temperature and the “Boiler rise” parameter in the DHW menu.
105 °C
Table 15 Adjustable parameter CFB 940
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Bosch Uni 3000 F bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Bosch Uni 3000 F in de taal/talen: Engels als bijlage per email.

De handleiding is 4,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Bosch Uni 3000 F

Bosch Uni 3000 F Gebruiksaanwijzing - English - 12 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info